Name: BSD 903-013 Axle w/pin
Brand: BSD
SKU: 903-013
Price: 59.00 NOK
Availability: InStock

DEANS FEMALE INCLUDING HEAT SHRINK (BATTERY END) ...

Radient

39,-

KJØP

Radient 010004 Deans Male Including HEAT SHRINK (ESC ...

DEANS MALE INCLUDING HEAT SHRINK (ESC END) (5PCS)

45,-

KJØP

DynoMAX 9843 Connector Adapter T-Plug (male) - Tamiya ...

DynoMAX Connector Adapter T-Plug (male) - Tamiya (male) This is an practical connector adapter for batteries with an T-Plug connector where you want to change it to an Tamiya connector without soldering etc. It also works if you have an charge lead with an Tamiya connector but you have an vehicle with a T-Plug connector system.

35,-

KJØP

DynoMAX 9572 Connector Bullet 4mm Male 10pcs

Bullet Connector Diameter: 4mm Bullet Connector Length: 12.5mm Total Length: 18.5mm Max Wire Diameter: 3mm Outer Diameter: 4.75 mm

209,-

KJØP

Traxxas 3834 Propeller plastic

Propeller plastic

85,-

KJØP

Traxxas 1275 Stinger motor 20t

Stinger Performance Motor Powerful, Stinger 20-turn modified motor, 30% faster than the typical stock motor! A "20-turn" single (which is the designation of the Stinger motor) indicates that a single thickness of wire is wound 20 times around the armature of the electric motor. The less times the wire is wound; the faster the motor will go. The thickness of wire around the armature determines how much torque the motor puts out. So, a 20-turn double would provide more torque than the 20-turn single. Remember, a more modified motor must be geared properly in order to achieve its maximum performance and may also eat up your battery causing you to have shorter run times. The Stinger motor is a mild modified motor that gives you alot of speed and still gives you around 6-10 minutes of run time, depending on how you have your car set-up and what kind of batteries you are using.

249,-

269,-

KJØP

-7%

Hobbywing Seaking 120A V3 2-6S Watercooled Boat ESC

Performance & Reliability Built with high-quality components and coupled with cutting-edge firmware, the Seaking 60A V3.1 is featured by unmatched performance and reliability. Multiple safety adjustable options are in use, with the implementation of the low-voltage cutoff protection, thermal protection and throttle signal loss protection. Efficient Cooling System The Hobbywing patented heat-conductive copper bar cover on the power board of the Seaking 60A V3.1 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keeping your ESC as cool as possible. Waterproof Design and Built-in BEC 100% waterproof without the need of extra protection. The built-in switch mode BEC with a maximum output of 6Amp and voltage of 6V make this ESC compatible with high voltage servo. Special Algorithm Design The special algorithm implemented in the ESC make the acceleration more incredible and sailing more stable. Separate PRG/FAN Port The separate PRG/FAN port on the ESC can connect ESC to a program box (via the trio-color programming cable) and start ESC programming. Specifications Brushed/Brushless: BL Waterproof: Yes Cont./Peak Current: 120A/720A Input: 2-6S LiPo, 6-18 Cells NiMH BEC Output: Linear Mode:6V/5A Wires & Connectors Input Wires: Red-12AWG-200mm*1 Black-12AWG-200mm*1 Output Wires: Black-12AWG-150mm*3 Input Connectors: No Output Connectors: No (Note: All the wire length above is the original length not the length you see from the outside.) ESC Programing via Transmitter: Supported LED Program Box: Supported LCD Program Box: Not Supported WiFi Module: Not Supported Program Port: Separate Program Port Firmware Firmware Upgrade: Not Supported Size & Weight Size: 68.5x39.4x32mm I.D./O.D. of the Water Cooling Pipe: Ф3.0/5.4 mm Weight: 150g Applications Boat Length <110cm Installation & Connection Connect the ESC, motor, receiver, battery and servo according to the wiring diagram below (Picture 1/2). Three wires from the ESC to the motor have no polarity, so you can connect them freely. Please recheck all the connections and ensure they are correctly connected before proceeding to step 2. (And you may find it’s necessary to swap two wires if the motor runs in reverse.) For safety, please always keep the propeller away from human body or any other objects. Red color input wire is positive pole, Black color input wire is negative pole. 1) Picture 1 is for Seaking-30A-V3, Seaking-60A-V3 and other ESCs that work with one LiPo battery pack; that is a wiring diagram with 1 battery pack. 2) Picture 2 is for Seaking-120A-V3, Seaking-180A-V3, Seaking-130A-HV-V3(without switch) and other ESCs that may work with two LiPo battery packs; that is the wiring diagram with 2 battery packs.

1.095,-

KJØP

BSD 903-031 Servo Saver Unit

Servo Saver Unit

115,-

KJØP

Traxxas 5733 Propeller 42x59mm Spartan

This is the stock 42x59 Propeller for the Spartan Boat from Traxxas. FEATURES: Black nylon construction INCLUDES: One 42x59 propeller REQUIRES: Installation on propeller shaft SPECS: Shaft Diameter: 4mm

59,-

KJØP