Traxxas

BSD 903-012 Rim Hub W/Pin(2*10)

Art.nr: 903-012

39,-

BSD

BSD

På lager: 3

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Rim Hub W/Pin(2*10)

Produsent

BSD

BSD

Kunder kjøpte også

Hovedbilde Yeah Racing YA-0180 Tornado High Speed Cooling Fan ( ...

Hovedbilde Yeah Racing YA-0180 Tornado High Speed Cooling Fan ( ...

Yeah Racing YA-0180 Tornado High Speed Cooling Fan ( ...

Yeah Racing Tornado High Speed Cooling Fan 30 x 30mm Description: Need something more powerful than your existing motor / ESC fan? This is exactly the fan for you. Yeah Racing Tornado Cooling Fan has Ultra High Speed. You need unmatched performance that this fan delivers. This dual ball bearing fan flows up to 100% more air than other similar Fan. The maximum power input voltage is 8.4v (2 cells Li-Po) Feature: For: ESC / Heatsink / Motor Color: Black Specification: Dimensions: 30 x 30 x 10mm Bearing: Dual Ball Bearing Operating: Voltage 5V Start-up Voltage: 3V Power: 1.40W Fan Speed: 14000 R.P.M (¡Ó20%) at 25¢J, after 3 min. rotating. Max Air Flow: 5.501CFM. Current: 0.28A Weight: 9.0g Connector: JST Include: Tornado Cooling Fan (1 Pc) Round Head Fitting Screw (4 Pc) Instruction Manual (1 Pc)

119,-

129,-

-8%

Hovedbilde BSD 909-005M Motor Gear 11T/M3 Screw

BSD 909-005M Motor Gear 11T/M3 Screw

Hard metall pinjong til BSD sin Monster Truck Børste og Børste løs (909 & 706T) Og Buggy Børste og børsteløs. (701G & 701G-R) Dette er biler i scala 1:10 Denne brukes sammen med 45-MPO021M

109,-

Hovedbilde Pro-Line 607002 Body Mount Thumbwasher Kit

Pro-Line 607002 Body Mount Thumbwasher Kit

This is the Pro-Line Body Mount Thumbwasher Kit. FEATURES: For the #6070-00 , #6071-00 , #6087-00 Pro-Line Body Mount Kits INCLUDES: Four each Thumbwashers, 4x12mm Set Screws, and O-Rings

159,-

Hovedbilde Traxxas 6856X 17mm Wheel Hub Set Short Blue Slash 4X4 ...

Traxxas 6856X 17mm Wheel Hub Set Short Blue Slash 4X4 ...

Traxxas package of four 17mm wheels hubs for the Slash 4x4 and Stampede 4x4. Kit includes all hardware for converting to 17mm 1/8 scale off-road tires including hubs, hub retainers, splined 17mm wheel nuts and allen wrench for installation.

479,-

519,-

-8%

Hovedbilde Traxxas 6895 Front Sway Bar Linkage (2)

Traxxas 6895 Front Sway Bar Linkage (2)

This is the Front Linkage Sway Bar Set for the Slash 4x4 from Traxxas and Stampede 4x4. FEATURES: Nylon and steel construction INCLUDES: 2 Rod ends 2 Ball studs 2 Hollow balls REQUIRES: Installation on front suspension

125,-

Hovedbilde Absima 2530007 Wheel Set Buggy

Absima 2530007 Wheel Set Buggy "6 Spoke/Street" White ...

Wheel set buggy "6 spoke/street" white Amount: 2 pieces Diameter: 104mm Width: 40mm Wheel hub: 17mm

289,-

Hovedbilde BSD 903-098 Diff. Gearbox Bulkhead-Upper/Lower

BSD 903-098 Diff. Gearbox Bulkhead-Upper/Lower

Diff. Gearbox Bulkhead-Upper/Lower

49,-

Hovedbilde Traxxas 3769 Spring Pre Load Spacers

Traxxas 3769 Spring Pre Load Spacers

This is the Traxxas replacement TRX3769 Spring Pre-Load Spacers that comes with the Stampede and Rustler trucks and many others Traxxas cars along with the Black Long Shocks. and Black XX-Long shocks. FEATURES Made of a black plastic/nylon material. Used to help pre-load the shock springs. This is installed on the top of the shock springs. Enough for 1 pair of shocks. INCLUDES 2 spacers 1mm thick 2 "" 2mm "" 2 "" 3mm "" 2 "" 4mm "" , COMMENTS Looks like a letter "C" Also fits shocks with a 13.5mm outside diameter body.

59,-

Hovedbilde Traxxas 6496X Pinion Gear 24T 1.0M Pitch for 5mm shaft

Traxxas 6496X Pinion Gear 24T 1.0M Pitch for 5mm shaft

Gear, 24-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

89,-

Hovedbilde Traxxas 6443 Spur Gear 50-Tooth Steel (Machined, ...

Traxxas 6443 Spur Gear 50-Tooth Steel (Machined, ...

Traxxas 6443 Spur gear, 50-tooth (machined, hardened steel) (wide face, 1.0 metric pitch) 50-tooth spur gear (1.0 metric pitch) is machined from hardened steel with extra-wide steel teeth for ultimate power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Accessory part for these models: E-Revo® VXL Brushless Maxx® X-Maxx® XO-1® XRT™

429,-

469,-

-9%

Hovedbilde Traxxas 7727R Bulkhead Rear Upper X-Maxx, XRT

Traxxas 7727R Bulkhead Rear Upper X-Maxx, XRT

Traxxas 7727R Bulkhead, rear (upper) (fits X-Maxx® 8s or XRT™) Rear upper bulkhead fits 8s X-Maxx® and XRT™ Replacement part for these models: XRT™ X-MAXX™ 8s

69,-

Hovedbilde Traxxas 1747R Nuts 4mm Flanged Nylon Locking (4)

Traxxas 1747R Nuts 4mm Flanged Nylon Locking (4)

These are the 4mm Flanged Nylon Locknuts from Traxxas. FEATURES: Aluminum construction anodized blue in color Serrated on the back for sure grip INCLUDES: Four 4mm Flanged Nylon Locknuts REQUIRES: 6mm nut driver SPECS: Hole Diameter: 4mm Hex Size: 6mm

99,-

109,-

-9%

Hovedbilde BSD 205-011 Front tire unit touring car

BSD 205-011 Front tire unit touring car

BSD tire unit, for the BSD 1/10 touring car. 12 mm hex.

109,-

Hovedbilde BSD 903-018 Fr.Lower Susp.Arm-LF/RT

BSD 903-018 Fr.Lower Susp.Arm-LF/RT

Fr.Lower Susp.Arm-LF/RT

69,-

Hovedbilde BSD 903-017 FR/RR C-Carrier

BSD 903-017 FR/RR C-Carrier

FR/RR C-Carrier

69,-

Hovedbilde BSD 701-038 Battery Base & Cover/RR

BSD 701-038 Battery Base & Cover/RR

Battery Base & Cover/RR

69,-

Hovedbilde Flysky FS-GT3B 2.4GHZ Transmitter

Hovedbilde Flysky FS-GT3B 2.4GHZ Transmitter

Flysky FS-GT3B 2.4GHZ Transmitter

Programmerbar 2,4 GHz-rattradio for bil eller båt. En veldig bra bil og båt radio til en gunstig pris. GT-3B er en programmerbar rattradio med tre kanaler. Radioen sender på 2,4 GHz-båndet, noe som gir en mye sikrere signaloverføring og dette eliminerer forstyrrelser. Via LCD-displayet kan du raskt stille inn radioen slik du ønsker for akkurat ditt kjøretøy og lage de avanserte innstillinger for ABS-brems, dual rate, reversering, servokontroll m.m. Radioen har 10 modellminner. Mål 315x159x99 mm. Vekt 328 g. Leveres med mottaker og bindingskontakt. Manual på Engelsk medfølger. Key Features – Model Memory – Servos NOR/REV – Steering Trim – Throttle Trim – Dual Rate – End Point – ABS Settings – EXP Settings – Trainer Port (for VRC) – CE & FCC certified Specification – Channels : 3 Channels – Model type : car/boat – RF range : 2.40-2.48GHz – Bandwidth : 500Hz – Band : 160 – RF power : less than 20DB – 2.4G system : AFHDS – Code type : GFSK – Sensitivity : 1024 – Low voltage warning : yes(less than 9V) – DSC por t: yes(3.5mm:output:PPM) – ST range : 90 – TH range : 45(F:30;B:15) – Charger port : yes – Power : 12V DC(1.5AA*8) – Weight : 328g – ANT length : 26mm – Size : 159 x 99 x 315mm – Color : black – Certificate : CE,FCC Includes : – 1 x 2.4Ghz transmitter – 1 x 2.4Ghz Receiver – 1 x Bind Plug

699,-

849,-

-18%

Hovedbilde Traxxas 7758G Wheel Nuts 17mm Alu Green (4)

Traxxas 7758G Wheel Nuts 17mm Alu Green (4)

Wheel nuts, splined, 17mm, serrated (green-anodized) (4)

149,-

159,-

-6%

Hovedbilde BSD 221-018 Spur Diff Unit

BSD 221-018 Spur Diff Unit

BSD 221-018 Spur Diff Unit MERKE BSD MODELL 221T Giant Racer Buggy (Børste), 222R Giant Racer Truggy, 222T Giant Racer Truggy (Børste)

389,-

429,-

-9%

Hovedbilde Traxxas 7836 Steering Blocks L&R (Pair) XRT, X-Maxx

Traxxas 7836 Steering Blocks L&R (Pair) XRT, X-Maxx

Steering Blocks L&R (Pair) XRT, X-Maxx Steering blocks, left & right These left and right steering blocks were redesigned and beefed-up for XRT™. Standard in XRT, they can be used to upgrade X-Maxx® for extreme duty and maximum strength. (Steering blocks require 5196A inner bearings)

99,-

109,-

-9%

Hovedbilde Hobbywing EzRun Combo MAX10 G2 80A - 3652SD 4100kV G3 ...

Hovedbilde Hobbywing EzRun Combo MAX10 G2 80A - 3652SD 4100kV G3 ...

Hobbywing EzRun Combo MAX10 G2 80A - 3652SD 4100kV G3 ...

Hobbywing Ez-Run Max10 G2 80A ESC & 3652SD G3 4100KV Motor Combo - 2-3S LiPo ESC Sensor Upgrade, Great Throttle Response Smart technology increases heat dissipation effectiveness Larger capacitor built-in, double explosion-proof Smart freewheeling technology, higher efﬁciency Data logging, convenient IP67 protection, all-weather use Upgraded sensor-mode with great throttle response The EzRun Max10 G2 ESC features and improved waterproof sensored cable interface and an upgraded sensored mode to achieve a great sense of throttle respons and perfectly matches the EzRun 3652SD/3565SD G3 motors. Supports Turbo timing adjustment of up to 32 degrees, and in combination with the EzRun 3652/3665 G3, the maximum speed is 25% more. Turbo timing adjustments: 32 Degrees Speed is significantly increased up to 25% Compared to the previous generation, the MAX10 G2 has a stronger explosive force and a more stable output power, and at the same time, it has excellent low-speed linearity. Large built-in capacitor = Double explosion proof Compared to the previous generation of the Max10 ESC, the total capacitance of the capacitors are increased by 74% and is overheat protected. Improved power delivery from the battery to the ESC to avoid it from overloading and causing the capacitors to explode. Smart freewheeling technology, higher efficiency The new smart freewheeling technology enables the Max10 G2 to have higher drive efficiency that the earlier generation, resulting in lower operation temperatures and a minimum temperature of approximately 25°C lower that the previous generation. Data logging, convenient After connecting the ESC with the OTA Bluetooth module, you can view the data (throttle amount, voltage, current, temperature, speed and etc) in real time through the mobile app to know the running status; The history of the running status can also be viewed by data logging. ESC IP67 protection, all-weather use The IP-67 waterproof system guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The ESC also supports motor with ordinary sensored mode interface. Cables to be purchased separately. ESC Specs: Scale: 1/10 Type: Brushless/Sensored Waterproof: Yes (IP67) Cont./Peak Load: 180/520A Input Voltage: 2-3S LiPo BEC: 6/7.4V @ 5A Input Wires: 12AWG Output Wires: 12AWG Input Connector: XT60 Output Connector: 4mm Gold (female bullet) Fan Size: 25x25x10mm Size: 53x39.5x37.2mm Weight: 120g Firmware Upgrade: Supported ESC Programming via: SET Button on ESC: No LED Program Box: Supported LCD Program Box (G2): Supported Programming Port: Separate ESC Applications: 1/10 Vehicles: Short Course Tryucks, Stadium Trucks, & Monster Trucks (Light Loads) KV Rating 2S LiPo: ≤6000kV KV Rating 3S LiPo: ≤4200kV 3652 size motor EZRUN 3652SD-3300KV G3 Sensored Motor The new generation adds performance. The evolution of a sensored motor, increases performance. The EzRun 3652/3665 SD G3 features an improved waterproof sensored cable interface and an upgraded sensored mode to achieve motor temperature protection and perfectly matches the EzRun MAX10 G2 ESC. Motor Features: Chip built in the motor, when matched with Hobbywing EZRUN MAX10 G2 esc, it not only has perfect compatibility, the ESC can automatically identify the motor and build a pure/full sensor mode power system, providing better manipulating performance and more delicate manipulating feel. Compared with the previous generation motor, the output power and efficiency are increased by more than 3%. Under the same load, the motor temperature is effectively reduced. The independent high-precision encoder always outputs pure rotor position signal, which effectively avoids the interference of sensor signal and makes the motor work stably in sensor state. CNC machined aluminum housing, high purity copper windings, advanced rotor structure, 0.2mm silicon steel laminations, high-quality stainless steel output shaft, high-precision bearing for high durability and smoothness. The innovative new sensor interface and rubber cover bearing have better waterproof and dust-proof effect than the traditional sensor motor. Powerful hardware configuration, efficiency is greatly improved The high-precision Hall sensor components ensures that the rotor position output is always accurate and consistent, achieving excellent linearity and a great throttle control. The EzRun 3652/3665 G3 motor adopts a high precision bearing that is waterproof in the front end of the motor. The rear end of the motor uses precision iron cover with a smaller structure to improve the capacity, and at the same time, provides a higher bearing speed while keeping resistance low. The operation is smoother and more reliable. Compared to the G2 motor: The overall efficiency is increased by 3% More effective while the maximum output power has increased by 5% The motor temperature is greatly reduced under the same load conditions The stable power and high output of the motor, makes throttle control for maneuvers (power wheelies, straight line power, and clearing jumps) much easier. Design, quality materials, durable All the materials used on the EZRUN 3652/3665 G3 motor (Motor casing, bearings, ultra-thin silicon steel sheets, high temperature-resistance copper wire, explosion-proof rotor, high-tolerance alloy shaft) are carefully selected and approved by our in-house engineers. Hobbywing is serious in providing users with an extraordinary performance for a long period of time. The motor adopts a modular detachable structure design for easy disassembly and daily maintenance. This helps to prolong the lifespan of the motor and maintaining the efficiency of the motor simple. Applicable to All Weather & Track Conditions The IP-67 waterproof system guarantees excellent waterproofing and dustproofing protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note, the bearings are not IP rated. Motor Specs: Scale: 1/10 Type: Sensored/Brushless Pole Count: 4 KV Rating: 4100 LiPo Cells: 2-3S No-load Current: ≤5A Diameter: 37mm Length: 53mm Shaft Diameter: 3.17mm (1/8") Weight: 228g Front Bearing: D13xD5xT4mm (not IP rated) Rear Bearing: D11xD5xT5mm (not IP rated) Applications: 1/10; On-road/Off-road, Short Course 2WD Truck (Light Loads)

1.659,-

1.859,-

-11%

Hovedbilde Traxxas 7896 Driveshaft Steel Maxx WideMaxx, XRT

Traxxas 7896 Driveshaft Steel Maxx WideMaxx, XRT

Driveshaft, steel constant velocity (shaft only, 190.3mm) (1) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

229,-

239,-

-4%

Hovedbilde Traxxas 1654R Wheel Hubs Steel Hex 12mm (2)

Traxxas 1654R Wheel Hubs Steel Hex 12mm (2)

Wheel hubs, hex (steel) (2)/ axle pins (2)

69,-

Hovedbilde Traxxas 6851A Driveshaft assembly, front, extreme ...

Traxxas 6851A Driveshaft assembly, front, extreme ...

Driveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

169,-

189,-

-11%

Hovedbilde Radient 010064 EC5 Pairs (5PCS)

Radient 010064 EC5 Pairs (5PCS)

Radient 010064 EC5 Pairs (5PCS) MERKE Radient KONTAKT EC5

219,-