Traxxas

-17%

HPI Racing 101209 Front Hub Carriers Left/Right 10 Degrees

Art.nr: 101209

99,-

~~119,-~~

- 17%

Hpi Racing

Hpi Racing

På lager: 3

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

These are the Front Hub Carriers for the HPI WR8 and Bullet Series.

FEATURES:

Plastic construction

INCLUDES:

Left and Right Front Hub Carriers

REQUIRES:

Four 5x10mm Ball Bearings

(11)

Produsent

Hpi Racing

Hpi Racing

Kunder kjøpte også

Hovedbilde HPI Racing Z800 Spring Washer 3x6mm (20)

HPI Racing Z800 Spring Washer 3x6mm (20)

These are the 3x6mm Spring Washers from HPI Racing. FEATURES Steel construction Silver in color INCLUDES Twenty 3x6mm Spring Washers SPECIFICATIONS Outer Diameter: 6mm Inner Diameter: 3mm

39,-

Hovedbilde Traxxas 2584 Cap Head Screws 3x12mm (6)

Traxxas 2584 Cap Head Screws 3x12mm (6)

These are 3x12mm Cap Head Screws from Traxxas. FEATURES: Steel Construction Black in color Hex head INCLUDES: Two 3x12mm cap screws SPECS: Length: 12mm (.47") Diameter: 3mm (.12")

35,-

Hovedbilde Kyosho 74493 K7 GLOW PLUG

Kyosho 74493 K7 GLOW PLUG

KYOSHO K7 GLOW PLUG

159,-

Hovedbilde HPI Racing 101226 Steering Nut 3mm (4)

HPI Racing 101226 Steering Nut 3mm (4)

This is the Steering Nut 3mm (4pcs) For the HPI Racing WR8 Car RTR FEATURES Steel construction INCLUDES Four steering nuts COMMENTS This nut can be installed on the 1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR

59,-

Hovedbilde HPI 101239 Racing Pin 1.7x11mm

HPI 101239 Racing Pin 1.7x11mm

This is the Pin 1.7x11mm (10pcs) For the HPI Racing WR8 rally car FEATURES Steel construction INCLUDES Ten pins COMMENTS This pin can be installed on the 1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR

29,-

Hovedbilde HPI 101228 Racing Axle 5x40mm (2)

HPI 101228 Racing Axle 5x40mm (2)

This is a pair of 5x40mm Axles for the HPI Savage XS Flux and Bullet Vehicles. FEATURES: Steel construction INCLUDES: Two 5x40mm Axles

139,-

Hovedbilde Traxxas 3647 Nuts 4mm Flanged Nylon Locking Steel (8)

Traxxas 3647 Nuts 4mm Flanged Nylon Locking Steel (8)

This is the Traxxas Flanged Nylon Locking Nuts. FEATURES: Steel serrated construction INCLUDES: Eiqht 4mm flanged nylon locking nuts SPECS: Outside diameter: 7mm

39,-

Hovedbilde HPI Racing 107901 Body Post Extender Set

HPI Racing 107901 Body Post Extender Set

This is the Body Post Extender Set for the HPI WR8 Flux Rally Car from HPI. FEATURES Plastic construction Fits over tops of rear body posts INCLUDES Two Body Post Extenders

69,-

Hovedbilde HPI Z241 Racing E-Clip E2.5mm (20)

HPI Z241 Racing E-Clip E2.5mm (20)

These are the 2.5mm E-clips by HPI. FEATURES: For Sprint gear differential, may also be used anywhere a clip of this size is needed Steel construction, silver in color INCLUDES: Twenty 2.5mm E-clips by HPI SPECS: Outer Diameter: 6mm Size of Opening: 2.5mm (11)

29,-

Hovedbilde HPI Racing 107904 Rear Body Mount WR8 Flux

HPI Racing 107904 Rear Body Mount WR8 Flux

This is the Rear Body Mount for the HPI WR8 Flux Rally Car from HPI. FEATURES Plastic construction Installs at rear of chassis and holds rear body posts in place INCLUDES Rear Body Mount

59,-

Hovedbilde Haiboxing H153 E-Clic (2mm) (8)

Haiboxing H153 E-Clic (2mm) (8)

E-Clic (2mm) (8)

25,-

Hovedbilde HPI 101215 Bevel Gear 40T Savage XS/Bullet

HPI 101215 Bevel Gear 40T Savage XS/Bullet

This is the 40 Tooth Bevel Gear for the HPI Savage XS Flux and Bullet Vehicles. FEATURES Sintered steel construction INCLUDES 40 Tooth Bevel Gear

115,-

125,-

-8%

Hovedbilde Axial AX1218 Bearing 5x10x4mm

Axial AX1218 Bearing 5x10x4mm

This is a pair of replacement 5x10x4mm Bearings for the Axial AX10 Scorpion Rock Crawler. FEATURES Stainless steel construction, silver in color Sealed design helps keep the bearing running smooth and friction free INCLUDES Two Bearings REQUIREMENTS Installation following the model manual SPECIFICATIONS Inside Diameter: 5mm Outside Diameter: 10mm Thickness: 4mm

69,-

Hovedbilde HPI 101293 Body Mount Set for Bullet Series

HPI 101293 Body Mount Set for Bullet Series

Body Mount Set for Bullet Series

139,-

Hovedbilde HPI 109921 Racing HD Axle 5x40mm WR8 Savage XS Bullet

HPI 109921 Racing HD Axle 5x40mm WR8 Savage XS Bullet

This is a pair of optional Heavy Duty Axles. FEATURES Fits the HPI Bullet ST 3.0, Bullet MT 3.0, Bullet ST Flux, Bullet MT Flux and Savage XS Steel construction Reduces drivetrain wear and extends service intervals INCLUDES Two Heavy Duty Axles SPECIFICATIONS Length: 40mm Diameter: 5mm

199,-

Hovedbilde Traxxas 2754 Stub Axles Pins (4)

Traxxas 2754 Stub Axles Pins (4)

These pins slide through the axle and hold the wheel to the axle. INCLUDES: 4- stub axle pins

15,-

Hovedbilde Radient 0306 Body Clip Retainer White 10 Clip 2

Radient 0306 Body Clip Retainer White 10 Clip 2

Body Clip Retainer White 10 Clip 2 Retainer En smart sak som festes på karosseriet og som tar vare på dine karosseri klips. Ved å bruke denne slipper du å miste dine karosseri klips. Leveres med 2 «fester» som tar vare på 2 stk klips. 10 Stk klips medfølger.

39,-

Hovedbilde Radient Reaktor 0305 Body Clip Retainer Red 10 Clip 2 ...

Radient Reaktor 0305 Body Clip Retainer Red 10 Clip 2 ...

En smart sak som festes på karosseriet og som tar vare på dine karosseri klips. Ved å bruke denne slipper du å miste dine karosseri klips. Leveres med 2 «fester» som tar vare på 2 stk klips. 10 Stk klips medfølger. Leveres i Rød

39,-

Hovedbilde Traxxas 5656 Half Shaft Set Long

Traxxas 5656 Half Shaft Set Long

These are the Long Half Shafts for use on the Traxxas Summit 1/10 Truck RTR. FEATURES: Plastic construction Black in color INCLUDES: Two Long Half Shaft Sets, internal splined half shafts and external half shafts with glued boot REQUIRES: Installation on the vehicle SPECS: Length: 130mm (5") Diameter: 17.3mm (0.68")

99,-

Hovedbilde Traxxas 5655 Half Shaft Set Short

Traxxas 5655 Half Shaft Set Short

These are the Short Half Shafts for use on the Traxxas Summit 1/10 Truck RTR. FEATURES: Plastic construction Black in color INCLUDES: Two Short Half Shaft Sets, internal splined half shafts and external half shafts with glued boot REQUIRES: Installation on the vehicle SPECS: Length: 117mm (4.6") Diameter: 17.15mm (0.68")

99,-

Hovedbilde HPI Racing 101299 Front Inner Suspension Shaft 3x57mm ...

HPI Racing 101299 Front Inner Suspension Shaft 3x57mm ...

This is the 3X57mm Front Inner Suspension Shaft For the HPI Racing WR8 and Bullet Series FEATURES Metal construction INCLUDES Two suspension shafts Three E-clips COMMENTS This shaft can be installed on 1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR 1/10 Bullet MT Flux 2.4GHz RTR 1/10 Bullet ST Flux 2.4GHz RTR 1/10 Bullet MT 3.0 Nitro 2.4GHz RTR 1/10 Bullet ST 3.0 Nitro 2.4GHz RTR

45,-

Hovedbilde HPI Racing 107874 Drive Shaft 56mm WR8 Flux (2)

HPI Racing 107874 Drive Shaft 56mm WR8 Flux (2)

This is the Drive Shaft 56mm For the HPI Racing 1/8 WR8 Rally Car FEATURES Made of steel INCLUDES Two drive shafts SPECIFICATIONS Length, overall: 62mm (2-1/8") Shaft diamter: 3.7mm (1/8") COMMENTS This is a replacement part for HPI Racing 1/8 Ken Block WR8 Flux Ford Fiesta H.F.H.V. HPI Racing 1/8 WR8 Flux w/Ford Fiesta Abu Dhabi WRC HPI Racing 1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR

159,-

Hovedbilde Traxxas 2925X 1200mAh Power Cell NiMH Battery

Traxxas 2925X 1200mAh Power Cell NiMH Battery

NB!! Denne her erstatter TRX 2925 Traxxas Series 1 battery packs with iD auto battery identification are standard equipment in Traxxas 1/16-scale models. Like all Traxxas Power Cell packs, Series 1 batteries feature heavy-duty construction, flexible silicone-jacketed wires and Traxxas' high current connector for positive plug-in with zero-loss efficiency. 1200mAh capacity NiMH 6-cell 7.2-volt Series 1 Power Cell battery with iD auto battery identification, replacement battery for 1/16 Traxxas vehicles Genuine iD-equipped Power Cell NiMH battery packs make sure you experience all the performance that's been engineered into your Traxxas model Accessory Traxxas iD Auto Battery Identification chargers (sold separately) detect Traxxas iD Power Cell batteries and automatically set and optimize charge settings for unmatched charging safety and simplicity Type Battery Material NiMH Colour Black Width 7.5 cm Height 16 cm Depth 2 cm Weight 152 g

299,-

319,-

-6%

Hovedbilde Traxxas 2872X LiPo 3S 11.1V 5000mAh 25C w/iD Connector

Traxxas 2872X LiPo 3S 11.1V 5000mAh 25C w/iD Connector

This is the Traxxas Power Cell 11.1V 5000mAh 25C 3S LiPo Battery. FEATURES Semi rigid construction does not require a hard case and eliminates wire harness connectors that can loosen and fail Engineered specifically to fit Traxxas models New high current connector with gold-plated copper terminals and integrated balance connector iD Auto Battery Identification allows Traxxas iD equipped chargers to automatically set and optimize charge settings for specific battery MAXX cable high-efficiency 12 gauge silicone jacketed wire INCLUDES Traxxas Power Cell 11.1V 5000mAh 25C LiPo 3S Battery with High Current Connector and Integrated Balance Plug REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus, LiPo charging bag SPECIFICATIONS Configuration: 3S1P Continuous Discharge: 25C (125A) Max Burst Rate: 50C (250A) Watt Hours: 55.5 Charge Rate: 1C (5A) Max Charge Rate: 2C (10A) Dimensions: 6.1 x 1.02 x 1.7" (155 x 26 x 44mm) Weight: 13.3oz (376g) COMMENTS ALWAYS use a LiPo-approved Charger ALWAYS use a LiPo Cell Balancer NEVER Charge over 4.20V per cell NEVER Charge at currents greater than 1C NEVER Trickle Charge NEVER allow to Discharge below 3.2V per cell NEVER disassemble or modify pack wiring in any way or puncture cells NEVER place on combustible materials or leave unattended during charging ALWAYS Charge in a fireproof location ALWAYS set charger's output volts to match battery volts ALWAYS keep out of reach of children

995,-

1.095,-

-9%

Hovedbilde Traxxas 7630 Suspension Arms Front/Rear (2) Teton

Traxxas 7630 Suspension Arms Front/Rear (2) Teton

These are the Front or Rear Suspension Arms for the LaTrax Teton Monster Truck from Traxxas. FEATURES Composite plastic construction Fastens to front or rear bulkheads INCLUDES Two Front or Rear Suspension Arms

69,-