Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / HPI El-Biler / HPI WR8 Flux / HPI Racing 101226 Steering Nut 3mm (4)

HPI Racing 101226 Steering Nut 3mm (4)

Art.nr: 101226

59,-

Hpi Racing

Hpi Racing
På lager: 3

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Steering Nut 3mm (4pcs) For the HPI Racing WR8 Car RTR

FEATURES

Steel construction

INCLUDES

Four steering nuts

COMMENTS

This nut can be installed on the 1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR

Produsent

Hpi Racing

Hpi Racing

Kunder kjøpte også

Hovedbilde Traxxas 2584 Cap Head Screws 3x12mm (6)
Traxxas 2584 Cap Head Screws 3x12mm (6)
These are 3x12mm Cap Head Screws from Traxxas. FEATURES: Steel Construction           Black in color           Hex head INCLUDES: Two 3x12mm cap screws SPECS:    Length:  12mm (.47")           Diameter: 3mm (.12")

35,-

KJØP
Hovedbilde Power HD LW-30MG Waterproof Servo 30kg/0.14s Hovedbilde Power HD LW-30MG Waterproof Servo 30kg/0.14s
Power HD LW-30MG Waterproof Servo 30kg/0.14s
LW-30MG Waterproof Servo 30kg/0.14s Power HD HV servo perfekt til 1/10 crawler for deg som ønsker plenty med kraft! Flott og motstandsdyktig utførelse i aluminiums-hus med gir i kobber og aluminium. Servoen er vannbestandig og div servohorn og skruer medfølger.   Spesifikasjoner: Kraft 4.8V: 18kg/cm Hastighet 4.8: 0.18 Kraft 6.0V: 25kg/cm Hastighet 6.0V: 0.16s Kraft 7.2V: 30kg Hastighet 7.2V:     0.14s Vekt: 62g Gir: Kobber & Alu Størrelse: 40.5x 20.5 x 39.3mm Servohorn 25T

499,-

569,-

KJØP
-12%
Hovedbilde Traxxas 2587 Cap Head Machine Screw 3x10mm Revo (6)
Traxxas 2587 Cap Head Machine Screw 3x10mm Revo (6)
       This is a package of six 3x10mm Traxxas Cap Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x10mm cap head screw is required INCLUDES: Six 3x15mm Traxxas Cap Head Screws REQUIRES: 2.5mm hex head wrench SPECS:    Length:  15mm           Diameter: 3mm

35,-

KJØP
Hovedbilde HPI 101239 Racing Pin 1.7x11mm
HPI 101239 Racing Pin 1.7x11mm
This is the Pin 1.7x11mm (10pcs)  For the HPI Racing WR8 rally car     FEATURES Steel construction   INCLUDES Ten pins   COMMENTS This pin can be installed on the  1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR

29,-

KJØP
Hovedbilde HPI 101228 Racing Axle 5x40mm (2)
HPI 101228 Racing Axle 5x40mm (2)
This is a pair of 5x40mm Axles for the HPI Savage XS Flux and Bullet Vehicles. FEATURES: Steel construction INCLUDES: Two 5x40mm Axles  

139,-

KJØP
Hovedbilde HPI Racing 101209 Front Hub Carriers Left/Right 10 ...
HPI Racing 101209 Front Hub Carriers Left/Right 10 ...
These are the Front Hub Carriers for the HPI WR8 and Bullet Series. FEATURES: Plastic construction INCLUDES: Left and Right Front Hub Carriers REQUIRES: Four 5x10mm Ball Bearings       (11)

99,-

119,-

KJØP
-17%
Hovedbilde Traxxas 5115 Ball Bearings 5x10x4mm Revo (2)
Traxxas 5115 Ball Bearings 5x10x4mm Revo (2)
 This is a 2 pack of 5X10mm Ball Bearings for the Traxxas Revo. FEATURES: Metal bearing construction           Blue rubber dirt shields INCLUDES: (2) 5X10mm ball bearings, Part #5115 SPECS:    Inside diameter:      3/16"      (5mm)           Outside diameter:      3/8"     (10mm)           Width:                5/32"      (4mm)

49,-

KJØP
Hovedbilde Traxxas 3647 Nuts 4mm Flanged Nylon Locking Steel (8)
Traxxas 3647 Nuts 4mm Flanged Nylon Locking Steel (8)
This is the Traxxas Flanged Nylon Locking Nuts. FEATURES: Steel serrated construction INCLUDES: Eiqht 4mm flanged nylon locking nuts SPECS:    Outside diameter: 7mm

39,-

Ikke på lager
Hovedbilde HPI Racing 107904 Rear Body Mount WR8 Flux
HPI Racing 107904 Rear Body Mount WR8 Flux
This is the Rear Body Mount for the HPI WR8 Flux Rally Car from HPI.     FEATURES Plastic construction  Installs at rear of chassis and holds rear body posts in place   INCLUDES Rear Body Mount

59,-

KJØP
Hovedbilde HPI Racing 101223 Servo Saver Posts 5x35mm
HPI Racing 101223 Servo Saver Posts 5x35mm
These are the Servo Saver Posts 5x35mm for the HPI Racing WR8 FEATURES Steel construction INCLUDES Two servo saver posts COMMENTS These posts can be installed on 1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR

49,-

KJØP
Hovedbilde HPI 107880 Racing Drive Shaft 105mm WR8 Flux
HPI 107880 Racing Drive Shaft 105mm WR8 Flux
This is the 105mm Driveshaft for the HPI WR8 Rally Car Series.     FEATURES Steel construction   INCLUDES 105mm Driveshaft   SPECIFICATIONS  Length: 4.13" (105mm) from center of ball ends  Diameter: 0.15" (3.9mm)

49,-

KJØP
Hovedbilde HPI Racing 107874 Drive Shaft 56mm WR8 Flux (2)
HPI Racing 107874 Drive Shaft 56mm WR8 Flux (2)
This is the Drive Shaft 56mm  For the HPI Racing 1/8 WR8 Rally Car     FEATURES Made of steel   INCLUDES Two drive shafts   SPECIFICATIONS  Length, overall: 62mm (2-1/8")  Shaft diamter: 3.7mm (1/8")   COMMENTS This is a replacement part for  HPI Racing 1/8 Ken Block WR8 Flux Ford Fiesta H.F.H.V.  HPI Racing 1/8 WR8 Flux w/Ford Fiesta Abu Dhabi WRC  HPI Racing 1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR

159,-

KJØP
Hovedbilde Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ... Hovedbilde Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ...
Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ...
Yeah Racing RC PTFE Bearing (5x10x4mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6013BS/10) RC Telfon Bearing (5x10x4mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation:   High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)  

79,-

89,-

KJØP
-11%
Hovedbilde Traxxas 5119A Ball bearings, black rubber sealed ...
Traxxas 5119A Ball bearings, black rubber sealed ...
Disse lagerene er samme størrelse som Tamiya 1510 Ball bearings, black rubber sealed (10x15x4mm) (2)

89,-

KJØP
Hovedbilde Traxxas 5116A Ball bearings, black rubber sealed ...
Traxxas 5116A Ball bearings, black rubber sealed ...
Disse lagerene er samme størrelse som Tamiya 1150 Ball bearings, black rubber sealed (5x11x4mm) (2)

49,-

KJØP
Hovedbilde HPI Racing 107902 Front Bumper Set WR8 Flux
HPI Racing 107902 Front Bumper Set WR8 Flux
          This is the Front Bumper Set FEATURES Made of black plastic INCLUDES Two different pieces   SPECIFICATIONS  Longer piece, length: 2-11/16" (65mm)  width: 4-5/8" (117mm)  height: 5/8" (16mm)  Shorter piece, length: 2" (51mm)  width: 4-1/2" (114mm)  height: 1-3/8" (35mm)      

119,-

KJØP
Hovedbilde Traxxas 5136X Differential Oil Kit Revo
Traxxas 5136X Differential Oil Kit Revo
This is the Diff Oil Kit for the Revo by Traxxas. FEATURES: Three bottles of oil (10K,30K,50K weights). INCLUDES: Three 2oz (59ml) bottles of oil           Three pour spouts

249,-

KJØP
Hovedbilde Hpi Racing 101298 - DIFF GEAR SET
Hpi Racing 101298 - DIFF GEAR SET
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.   THIS PART FITS THE FOLLOWING KITS / PARTS: Bullet ST 3.0 STD Bullet MT 3.0 STD Bullet ST Flux STD Bullet MT Flux STD RTR WR8 3.0 Ford Fiesta Abu Dhabi... STD RTR Bullet ST 3.0 w/ 2.4GHz STD RTR Bullet MT 3.0 w/ 2.4GHz STD RTR Bullet ST Flux W/ 2.4GHz STD RTR Bullet MT Flux w/ 2.4GHz STD RTR WR8 Flux Rally STD Ken Block WR8 with Ford Fiesta H.F... STD Bullet ST 3.0 STD Bullet MT 3.0 STD Bullet ST Flux STD Bullet MT Flux STD Ken Block 2013 GRC WR8 Flux STD KEN BLOCK 2013 GRC WR8 3.0 STD WR8 FLUX KEN BLOCK 2014 FORD FIESTA STD WR8 3.0 KEN BLOCK FORD FIESTA ST... STD RS4 Sport 3 BMW M3 E30 STD RS4 Sport 3 Flux Falken Porsche... STD RS4 Sport 3 Drift Subaru BRZ STD RS4 Sport 3 2015 Ford Mustang Spec... STD WR8 Flux Ken Block 2015 Ford Fiesta STD WR8 3.0 Ken Block 2015 Ford Fiesta... STD RS4 Sport 3 Drift 2015 Ford Mustang STD RS4 SPORT 3 RTR KEN BLOCK 1965 FORD STD RS4 SPORT 3 Creator Edition STD WR8 FLUX KEN BLOCK GYMKHANA FORD... STD WR8 3.0 KEN BLOCK GYMKHANA FORD... STD RS4 SPORT 3 DRIFT WORTHOUSE JAMES... STD RS4 SPORT 3 FLUX FORD GT HERITAGE... STD RS4 SPORT 3 1969 FORD MUSTANG... STD

135,-

KJØP
Hovedbilde HPI 101305 Racing Wheel Spacer Set (4)
HPI 101305 Racing Wheel Spacer Set (4)
This is the Wheel Spacer Set (4pcs) For the HPI Racing WRI and Bullet Series FEATURES: Metal construction INCLUDES: Four wheel spacers Four bushings COMMENTS: This wheel spacer set can be installed on 1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR 1/10 Bullet MT 3.0 Nitro 2.4GHz RTR 1/10 Bullet ST 3.0 Nitro 2.4GHz RTR       (11)

69,-

KJØP
Hovedbilde HPI 109921 Racing HD Axle 5x40mm WR8 Savage XS Bullet
HPI 109921 Racing HD Axle 5x40mm WR8 Savage XS Bullet
This is a pair of optional Heavy Duty Axles. FEATURES Fits the HPI Bullet ST 3.0, Bullet MT 3.0, Bullet ST Flux, Bullet MT Flux and Savage XS Steel construction Reduces drivetrain wear and extends service intervals INCLUDES Two Heavy Duty Axles SPECIFICATIONS Length: 40mm Diameter: 5mm

199,-

KJØP
Hovedbilde HPI Racing 101208 Front/Rear Upright Set Left/Right
HPI Racing 101208 Front/Rear Upright Set Left/Right
These are the Front Knuckles and Rear Uprights for the HPI WR8 and Bullet Series of Vehicles. FEATURES: Plastic construction INCLUDES: Left and Right Front Knuckles and Rear Uprights with four Hex Inserts       (11)

159,-

169,-

KJØP
-6%
Hovedbilde HPI Racing Z800 Spring Washer 3x6mm (20)
HPI Racing Z800 Spring Washer 3x6mm (20)
These are the 3x6mm Spring Washers from HPI Racing. FEATURES Steel construction Silver in color INCLUDES Twenty 3x6mm Spring Washers SPECIFICATIONS Outer Diameter: 6mm Inner Diameter: 3mm

39,-

KJØP
Hovedbilde HPI Racing 543 Cap Head Screw M3x10 (6)
HPI Racing 543 Cap Head Screw M3x10 (6)
This is a package of 3x10mm Caphead Machine Screws. FEATURES Plain black steel construction. High round cap head screw with a hexagon socket drive insert. These screws can be used anywhere this size is needed. INCLUDES (6) Caphead Machine Screws REQUIREMENTS 2.5mm Allen/Hex Wrench SPECIFICATIONS Diameter: 3mm Length: 10mm

35,-

KJØP
Hovedbilde HPI 101227 Racing Flange Pipe (4)
HPI 101227 Racing Flange Pipe (4)
This is the Flange Pipe (4pcs)  For the HPI Racing WR8     FEATURES Steel construction   INCLUDES Four flange pipes   COMMENTS This part is for the  1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR

85,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png