Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / HPI El-Biler / HPI WR8 Flux / HPI 101305 Racing Wheel Spacer Set (4)

HPI 101305 Racing Wheel Spacer Set (4)

Art.nr: 101305

69,-

Hpi Racing

Hpi Racing
På lager: 5

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Wheel Spacer Set (4pcs)
For the HPI Racing WRI and Bullet Series

FEATURES:

Metal construction

INCLUDES:

Four wheel spacers
Four bushings

COMMENTS:

This wheel spacer set can be installed on
1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR
1/10 Bullet MT 3.0 Nitro 2.4GHz RTR
1/10 Bullet ST 3.0 Nitro 2.4GHz RTR

 

 

 

(11)

Produsent

Hpi Racing

Hpi Racing

Kunder kjøpte også

Hovedbilde Traxxas 1952 Stub Axle Housing (2)
Traxxas 1952 Stub Axle Housing (2)
This is a set of two replacement rear hub carriers from Traxxas. These hub carriers mount to the rear lower control arms, and hold the rear axles.

39,-

KJØP
Hovedbilde Traxxas 6852X Driveshaft Assembly Rear Heavy Duty ...
Traxxas 6852X Driveshaft Assembly Rear Heavy Duty ...
This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas FEATURES: Black plastic and steel construction INCLUDES: Rear driveshaft assembly           Screw pin REQUIRES: Installation on vehicle

129,-

Ikke på lager
Hovedbilde Traxxas 6851X Driveshaft Assembly Front Heavy Duty ...
Traxxas 6851X Driveshaft Assembly Front Heavy Duty ...
This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas FEATURES: Black plastic and steel construction INCLUDES: Front driveshaft assembly           Screw pin REQUIRES: Installation on vehicle

129,-

Ikke på lager
Hovedbilde Traxxas 3762 Black Shocks XX-Long (2)
Traxxas 3762 Black Shocks XX-Long (2)
This is a Pair of the Traxxas Black Shocks XX Long.               These shocks are used on the rear of many Traxxas                         electric and nitro vehicles. FEATURES: Replaces damaged or worn shocks.           Molded black plastic bodies.           Change the dampening rate (firmness) of each shock with different             widths of pre-load spacers. INCLUDES: Two Traxxas Black Shocks XX Long with springs, pre-load spacers of             four different widths, silicone oil, bodies and pistons. REQUIRES: Assembling, filling with oil and installing on vehicle. SPECS:    Length: 4-1/32" (102mm) fully extended           Length: 2-3/4"  (69.85mm) fully compressed           Diameter: 1/2"  (13mm)

215,-

KJØP
Hovedbilde Traxxas 2754 Stub Axles Pins (4)
Traxxas 2754 Stub Axles Pins (4)
These pins slide through the axle and hold the wheel to the axle. INCLUDES:  4- stub axle pins

15,-

KJØP
Hovedbilde RPM 80022 Front Bumper & Skid Plate Black Slash 4x4
RPM 80022 Front Bumper & Skid Plate Black Slash 4x4
Front Bumper & Skid Plate for the Traxxas Slash 4×4 Quick Notes: – replaces stock Traxxas #6835 – matching Rear Bumper also available – optional Light Canister Set also available Description When Traxxas first announced the 4×4 version of the Slash, RPM customers immediately started asking us if our 2wd version parts would fit it. Sadly, that was not the case. Since then, we’ve been working hard to make all of those RPM parts 2wd owners love, fit on the Slash 4×4 version. Our three-piece front bumper / skid plate design for the Traxxas 4×4 is simple, yet strong, effective and highly attractive. We made it a three-piece design to give the Slash owner the option of full front-end bash-proof and crash-proof protection with the skid plate mount, skid plate and bumper installed or if they’re racing, they can remove the bumper and use the skid plate mount and skid plate as a light-weight alternative bumper / skid plate that sheds 27 grams (almost a full ounce) of weight from the front end of the truck. Once the race is over, simply reinstall the bumper and full bash protection is once again available! Our Traxxas Slash 4×4 front bumper design eliminates the bumper support ring and the 4 screws behind the stock bumper while using a thicker skid design to supply the cushioning resistance a basher-proof bumper needs. By eliminating the stock bumper support ring, absolutely no frontal impact crash energy is transferred into the upper half of the differential housing. We supply longer bumper mounting screws as well, so any impact energy from down low has less of a tendency to pull the mounting screws out from the bottom half of the differential housing. With an RPM impact-absorbing front bumper installed, the energy transferred from frontal impacts will be greatly reduced as well. RPM front bumpers for the Traxxas Slash 4×4 are available in three color options: black on black, blue on blue or a chrome bumper on a gray skid plate. We’re so confident in the strength and durability of these new bumpers that they too come with our unbeatable factory warranty protection. Suggestions: RPM light canister sets (RPM #80982 & #80983) fully integrate with our new Slash 4×4 front bumper and skid plate, giving the Slash 4×4 that awesome Desert Racing Truck look and open the 4×4 up to the addition of LED lights for nighttime fun! Don’t forget to check out our Roof-Mounted Light Bar Set too (RPM #80922, #80923 or #80925) for 6 more light canisters of night-blasting fun!    

219,-

239,-

KJØP
-8%
Hovedbilde Traxxas 6881 Front Differential Housings Slash 4X4
Traxxas 6881 Front Differential Housings Slash 4X4
This is the Front Differential Housing for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction           Black in color INCLUDES: Two front differential housing halves REQUIRES: Installation around assembled differential components

59,-

Ikke på lager
Hovedbilde RPM 80732 Rear Bearing Carriers Traxxas Slash/Stampede ... Hovedbilde RPM 80732 Rear Bearing Carriers Traxxas Slash/Stampede ...
RPM 80732 Rear Bearing Carriers Traxxas Slash/Stampede ...
RPM Rear Bearing Carriers for Hoss 4x4, Slash 4×4, Rustler 4×4, Telluride, Nitro Slash & Stampede 4×4 Replaces Traxxas stock #1952 & #1952X Quick Notes: Fits the Traxxas Slash 4×4, Rustler 4×4, Hoss 4×4, Telluride, Nitro Slash, Stampede 4×4, Nitro Rustler, Nitro Stampede & Nitro Sport Replaces Traxxas stock #1952 & #1952X Requires 2 – 5x11x4mm bearings (not included) Let’s face it: breaking parts sucks! When a part fails, the day is over. Not when your ride is equipped with RPM performance parts! Our newest muscle-laden product is a rear bearing carrier for the Slash 4×4, Rustler 4×4, Telluride, Nitro Slash & Stampede 4×4. The stock version simply can’t handle hardcore carnage like RPM products can. Our version is 100% stock geometry-perfect, but with a few tweaks to improve durability significantly. A ring surrounds the bearing bores, providing additional rigidity while a redesigned camber rod mounting boss helps disperse impact energy more evenly throughout the length of the carrier’s arm. Additionally, the bearing bores in our bearing carriers are designed to hold the bearings tight, meaning absolutely no bearing slop in the bearing bores! We also reduced the end-play of the axles by approximately 1/64”, keeping your rear end tracking perfectly like it’s supposed to. Obviously they wouldn’t be perfect without our trademark blend of RPM nylons that make our products so indestructible. Our carriers are so strong (like all RPM molded products) that we back them with a limited lifetime warranty against breakage! While we designed these bearing carriers with the Traxxas Slash 4×4 in mind, they are direct replacement parts for all of the following vehicles as well: Rustler 4×4, Stampede 4×4, Hoss 4×4, Telluride, Nitro Rustler, Nitro Stampede & Nitro Sport! If you’re tired of ending a fun day due to breakage, we’re here to solve that problem. Check us out; you’ll be glad you did! Tech Notes: RPM Rear Bearing Carriers replace Traxxas stock #1952 & #1952X. RPM Rear Bearing Carriers are sold without bearings

149,-

135,-

Ikke på lager
Hovedbilde Traxxas 2553 Screws Countersunk Machine 3x15mm Revo ...
Traxxas 2553 Screws Countersunk Machine 3x15mm Revo ...
This is a package of six 3x15mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x15mm countersunk screw is required INCLUDES: Six 3x15mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  15mm           Diameter: 3mm

35,-

KJØP
Hovedbilde Traxxas 1952A Carriers Stub Axle Red Anodized Rear (2)
Traxxas 1952A Carriers Stub Axle Red Anodized Rear (2)
 These are the optional 1.5° Aluminum Rear Stub Axle Carriers from Traxxas. FEATURES: Machined aluminum construction           Anodized red in color INCLUDES: Two Aluminum Rear Stub Axle Carriers           Two 3x3mm Set Screws           Two 3x12mm Flat Phillips Head Screws           Two 3x31.5mm Pins           Six 6mm E-Clips

329,-

349,-

KJØP
-6%
Hovedbilde HPI 101190 - 17MM HEX AND PIN SET (4pcs)
HPI 101190 - 17MM HEX AND PIN SET (4pcs)
HPI  101190 - 17MM HEX AND PIN SET (4pcs) TROPHY 4.6 TRUGGY RTR / TROPHY TRUGGY FLUX RTR THIS PART FITS THE FOLLOWING KITS / PARTS: Trophy Truggy 4.6 Trophy Truggy 4.6 Trophy Truggy Flux

109,-

KJØP
Hovedbilde Yeah Racing MG-32004 HD Steel 5mm Bore Motor ... Hovedbilde Yeah Racing MG-32004 HD Steel 5mm Bore Motor ...
Yeah Racing MG-32004 HD Steel 5mm Bore Motor ...
Yeah Racing HD Steel 5mm Bore Motor Gear/Pinions 32 Pitch 16 Teeth Description: 5mm bore 32 pitch pinions for your heavy duty and big vehicles! Made from HD steel for utmost durability and strength, prolongs the pinon's lifetime! Laser etched markings for you to clearly identify the size of the pinion with ease. Feature: For: 5mm Shaft Motors Material: HD Steel Color: Black Include: Pinion Gear (1 pc) Set Screw (1 pc)

59,-

KJØP
Hovedbilde 270MM SENSOR WIRE(BLACK) : 45047
270MM SENSOR WIRE(BLACK) : 45047
270MM SENSOR WIRE(BLACK) : 45047

85,-

KJØP
Hovedbilde HPI 101215 Bevel Gear 40T Savage XS/Bullet
HPI 101215 Bevel Gear 40T Savage XS/Bullet
This is the 40 Tooth Bevel Gear for the HPI Savage XS Flux and Bullet Vehicles. FEATURES Sintered steel construction INCLUDES 40 Tooth Bevel Gear

115,-

125,-

KJØP
-8%
Hovedbilde Axial 30843 Pinion Gear 32P 17T Steel 5mm Motor Shaft
Axial 30843 Pinion Gear 32P 17T Steel 5mm Motor Shaft
This is an optional Axial 5mm Bore, 17 Tooth, 32 Pitch Pinion Gear, and is intended for use with the Axial EXO Terra Buggy. Axial’s steel 32 Pitch pinion gears for the EXO Terra Buggy offer you an array of gearing options to fine tune torque and top speed. Features: 17 tooth  Powder steel construction for durability Includes two set screws per package Compatible with 32P spur gears Stamped tooth count for easy identification For 5mm motor shafts

85,-

KJØP
Hovedbilde Traxxas 5646 20T Pinion For 5mm Shaft
Traxxas 5646 20T Pinion For 5mm Shaft
This is a Traxxas 20 Tooth Pinion Gear for a 5mm Motor Shaft. FEATURES: Silver in color           Metal construction INCLUDES: (1) 20 Tooth Pinion Gear           (1) One 4mmx3.5mm set screw REQUIRES: Installation on motor shaft SPECS:    Outer Diameter: 18.0mm            Inner Diameter: 5mm (0.20")

69,-

Ikke på lager
Hovedbilde HPI 101229 Gear Shaft 5x29mm for Savage XS/Bullet (2)
HPI 101229 Gear Shaft 5x29mm for Savage XS/Bullet (2)
Gear Shaft 5x29mm for Savage XS/Bullet (2)

129,-

KJØP
Hovedbilde Hpi Racing 107970 WR8 Rally Off-Road Wheel Black ...
Hpi Racing 107970 WR8 Rally Off-Road Wheel Black ...
WR8/Use with 1.9"(48mm) tires Customise the look of your WR8 with the WR8 Rally Off-Road wheel! Styled to look just like the wheels used at WRC events and in rallies around the world, you can choose from a range of colours to get the perfect look for your ride. #107970 WR8 RALLY OFF-ROAD WHEEL BLACK (48x33mm/2pcs) #107971 WR8 RALLY OFF-ROAD WHEEL BRONZE (48x33mm/2pcs) Note: the above wheels fit the off-road WR8 tyres, such as 107870)

119,-

KJØP
Hovedbilde Hpi Racing 107870 WR8 Rally Off Road Tire (2pcs)
Hpi Racing 107870 WR8 Rally Off Road Tire (2pcs)
WR8/Use with 1.9"(48mm) wheels Modelled on the actual tires used in the WRC and at off-road rally events around the world, these tires are designed to get past the loose soil on top and dig into the firmer dirt underneath, giving you fantastic traction in just about every off-road situation. With a softer compound than the standard tire, plus excellent corner capabilities and fantastic self-cleaning properties for perfect mud-shedding performance, you'll get supreme cornering power as well as powerful acceleration and braking! Fit this tire onto any of our WR8 rally off-road wheels for the ultimate in realistic scale looks! #107881 WR8 RALLY OFF-ROAD WHEEL 48x33mm (WHITE / 2pcs) #107970 WR8 RALLY OFF-ROAD WHEEL BLACK (48x33mm/2pcs) NOTE: These are 1.9” tires and must be fitted on WR8 Off-Road Wheels.

289,-

KJØP
Hovedbilde HPI 101230 Racing Differential Shaft 5x23.5mm (2)
HPI 101230 Racing Differential Shaft 5x23.5mm (2)
These are the 5x23.5mm Diff Shafts for the HPI Savage XS Flux and Bullet Vehicles. FEATURES: Hardened steel construction INCLUDES: Two 5x23.5mm Diff Shafts       (11)

109,-

KJØP
Hovedbilde Traxxas 6468 Tire Glue TRX Ultra Premium Hovedbilde Traxxas 6468 Tire Glue TRX Ultra Premium
Traxxas 6468 Tire Glue TRX Ultra Premium
  Traxxas Ultra Premium Tire Glue Ultra Premium Tire Glue (#6468) with packageOnly one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand incredible centrifugal forces at speeds in excess of 100mph. No other glue endures such high loads, which makes Traxxas Ultra Premium Tire Glue the ultimate adhesive for any tire and rim combination (and any other application that requires a high-strength bond).  To preserve the maximum bonding power of Traxxas Ultra Premium Tire Glue, its bottle is specially designed to maintain a tight seal and prevent clogging. The bottle and nozzle are made of glue-resistant material, and a pin integrated into the tightly-fitting screw-on cap assures glue won't clog the bottle tip. The tip's fine opening allows precise glue application every time you reach for Traxxas Ultra Premium Tire Glue. Traxxas Ultra Premium Tire Glue is custom-blended exclusively for Traxxas. There simply is no better bond for high-speed, high-power vehicles. Traxxas Ultra Premium Tire Glue Features:   The only glue Traxxas Certified for the 100+mph XO-1 Highest-quality cyanoacrylate (CA) glue available Fine tip opening for precise glue application Tightly-fitting cap with sealing pin Glue-resistant bottle and tip material Includes two precision application tips Content 20gr    

139,-

159,-

KJØP
-13%
Hovedbilde Tamiya 86002 PS-2 Polycarbonate Spray Red 3 oz
Tamiya 86002 PS-2 Polycarbonate Spray Red 3 oz
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-2 Red).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
Hovedbilde Hpi Racing 101298 - DIFF GEAR SET
Hpi Racing 101298 - DIFF GEAR SET
Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.   THIS PART FITS THE FOLLOWING KITS / PARTS: Bullet ST 3.0 STD Bullet MT 3.0 STD Bullet ST Flux STD Bullet MT Flux STD RTR WR8 3.0 Ford Fiesta Abu Dhabi... STD RTR Bullet ST 3.0 w/ 2.4GHz STD RTR Bullet MT 3.0 w/ 2.4GHz STD RTR Bullet ST Flux W/ 2.4GHz STD RTR Bullet MT Flux w/ 2.4GHz STD RTR WR8 Flux Rally STD Ken Block WR8 with Ford Fiesta H.F... STD Bullet ST 3.0 STD Bullet MT 3.0 STD Bullet ST Flux STD Bullet MT Flux STD Ken Block 2013 GRC WR8 Flux STD KEN BLOCK 2013 GRC WR8 3.0 STD WR8 FLUX KEN BLOCK 2014 FORD FIESTA STD WR8 3.0 KEN BLOCK FORD FIESTA ST... STD RS4 Sport 3 BMW M3 E30 STD RS4 Sport 3 Flux Falken Porsche... STD RS4 Sport 3 Drift Subaru BRZ STD RS4 Sport 3 2015 Ford Mustang Spec... STD WR8 Flux Ken Block 2015 Ford Fiesta STD WR8 3.0 Ken Block 2015 Ford Fiesta... STD RS4 Sport 3 Drift 2015 Ford Mustang STD RS4 SPORT 3 RTR KEN BLOCK 1965 FORD STD RS4 SPORT 3 Creator Edition STD WR8 FLUX KEN BLOCK GYMKHANA FORD... STD WR8 3.0 KEN BLOCK GYMKHANA FORD... STD RS4 SPORT 3 DRIFT WORTHOUSE JAMES... STD RS4 SPORT 3 FLUX FORD GT HERITAGE... STD RS4 SPORT 3 1969 FORD MUSTANG... STD

135,-

KJØP
Hovedbilde HPI Racing 101226 Steering Nut 3mm (4)
HPI Racing 101226 Steering Nut 3mm (4)
This is the Steering Nut 3mm (4pcs) For the HPI Racing WR8 Car RTR FEATURES Steel construction INCLUDES Four steering nuts COMMENTS This nut can be installed on the 1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR

59,-

KJØP
Hovedbilde HPI Racing 107902 Front Bumper Set WR8 Flux
HPI Racing 107902 Front Bumper Set WR8 Flux
          This is the Front Bumper Set FEATURES Made of black plastic INCLUDES Two different pieces   SPECIFICATIONS  Longer piece, length: 2-11/16" (65mm)  width: 4-5/8" (117mm)  height: 5/8" (16mm)  Shorter piece, length: 2" (51mm)  width: 4-1/2" (114mm)  height: 1-3/8" (35mm)      

119,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png