Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / HPI El-Biler / HPI Racing Savage Flux XS / HPI 109921 Racing HD Axle 5x40mm WR8 Savage XS Bullet

HPI 109921 Racing HD Axle 5x40mm WR8 Savage XS Bullet

Art.nr: 109921

199,-

Hpi Racing

Hpi Racing
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is a pair of optional Heavy Duty Axles.

FEATURES

Fits the HPI Bullet ST 3.0, Bullet MT 3.0, Bullet ST Flux, Bullet MT Flux and Savage XS

Steel construction

Reduces drivetrain wear and extends service intervals

INCLUDES

Two Heavy Duty Axles

SPECIFICATIONS

Length: 40mm

Diameter: 5mm

Produsent

Hpi Racing

Hpi Racing

Kunder kjøpte også

Hovedbilde HPI 105913 - GT-2XS Truck Body Savage XS/Unpainted ...
HPI 105913 - GT-2XS Truck Body Savage XS/Unpainted ...
#105913 - GT-2XS TRUCK BODY SAVAGE XS/Unpainted body with precut decals. Customize your Savage XS with your own unique paint scheme using the crystal-clear GT-2XS truck body! Moulded from crystal clear polycarbonate plastic for high detail, extreme durability and low weight, this is a great way to instantly customize your Savage XS! The convenient pre-cut vinyl decal sheet includes: photorealistic headlights, grille, tail lights, official logos, window frames, door handles and more, all die-cut to make applying the decals quick and easy - there's no need to cut out the decals by hand! Overspray film and pre-cut vinyl window masks are included with each body. A decal instruction sheet is included for decal placement, and the body has dimple marks for body post drill locations. Photorealistic die-cut premium vinyl decals. The body has dimple marks for body post drill locations. Overspray film and pre-cut vinyl window masks make painting fast and simple Molded from strong clear polycarbonate plastic for durability and long life. THIS PART FITS THE FOLLOWING KITS / PARTS: Savage XS SS Savage XS Flux GT-2XS Savage XS Flux Ford F-150 SVT SAVAGE XS FLUX VGJR Savage XS Flux Chevrolet El Camino

349,-

KJØP
Hovedbilde HPI Z663 Lock Nut M3 (6pc)
HPI Z663 Lock Nut M3 (6pc)
THIS PART FITS THE FOLLOWING KITS / PARTS: Vorza Flux Savage X 4.6 Baja 5SC Bullet ST 3.0 Bullet MT 3.0 Bullet ST Flux Bullet MT Flux Baja 5b SS Kit Savage XL Flux Baja 5b D-Box 2 Baja 5B Sidewinder X5 Baja 5B TSk-b Class 1 SAVAGE XS FLUX VGJR VENTURE TOYOTA FJ CRUISER GREY VENTURE TOYOTA FJ CRUISER... VENTURE Scale Builder Kit VENTURE TOYOTA FJ CRUISER MATTE... WR8 FLUX KEN BLOCK GYMKHANA FORD... WR8 3.0 KEN BLOCK GYMKHANA FORD...STD JUMPSHOT MT V2.0 JUMPSHOT SC V2.0 JUMPSHOT ST V2.0 Savage XS Flux Chevrolet El Camino...

45,-

KJØP
Hovedbilde HPI Racing 106408 Wheely Bar Set
HPI Racing 106408 Wheely Bar Set
This is the Wheely Bar Set For the HPI Racing Savage XS Monster Truck FEATURES Black plastic construction INCLUDES One parts tree consisting of five parts Six screws in three sizes Two bearings Four locknuts in two sizes Installation instructions COMMENTS This wheely bar set can be installed on: Savage XS Flux 4WD Waterproof 2.4GHZ RTR Savage XS SS Kit

229,-

KJØP
Hovedbilde HPI 6819 Racing Silicone O-Ring P-3 Red
HPI 6819 Racing Silicone O-Ring P-3 Red
This is a Package of Red P-3 Silicone O-Rings for Hobby Use.  These are used in shocks, absorbing vibration, and many other uses.     FEATURES Silicone construction.   INCLUDES Five P3 o-rings.   REQUIREMENTS Nothing. These are direct replacement parts.   SPECIFICATIONS  Inner diameter: 3mm (0.20")   COMMENTS These o-rings are not limited to use only in HPI vehicles.

39,-

KJØP
Hovedbilde HPI 101228 Racing Axle 5x40mm (2)
HPI 101228 Racing Axle 5x40mm (2)
This is a pair of 5x40mm Axles for the HPI Savage XS Flux and Bullet Vehicles. FEATURES: Steel construction INCLUDES: Two 5x40mm Axles  

139,-

KJØP
Hovedbilde Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ... Hovedbilde Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ...
Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ...
Yeah Racing RC PTFE Bearing (5x10x4mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6013BS/10) RC Telfon Bearing (5x10x4mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation:   High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)  

79,-

89,-

KJØP
-11%
Hovedbilde HPI 101236 Racing Heavy Duty Drive Shaft 6x84mm
HPI 101236 Racing Heavy Duty Drive Shaft 6x84mm
This is the Heavy Duty Drive Shaft 6x84mm For the HPI Racing Bullet Series FEATURES: Steel construction INCLUDES: Two driveshafts COMMENTS: The HPI Racing Bullet Series includes Bullet ST Flux 2.4GHz RTR Bullet MT Flux 2.4GHz RTR Bullet ST 3.0 Nitro 2.4GHz RTR Bullet MT 3.0 Nitro 2.4GHz RTR         (11)

169,-

KJØP
Hovedbilde HPI Racing 101209 Front Hub Carriers Left/Right 10 ...
HPI Racing 101209 Front Hub Carriers Left/Right 10 ...
These are the Front Hub Carriers for the HPI WR8 and Bullet Series. FEATURES: Plastic construction INCLUDES: Left and Right Front Hub Carriers REQUIRES: Four 5x10mm Ball Bearings       (11)

99,-

119,-

KJØP
-17%
Hovedbilde HPI 101293 Body Mount Set for Bullet Series
HPI 101293 Body Mount Set for Bullet Series
Body Mount Set for Bullet Series 

139,-

KJØP
Hovedbilde Traxxas 2754 Stub Axles Pins (4)
Traxxas 2754 Stub Axles Pins (4)
These pins slide through the axle and hold the wheel to the axle. INCLUDES:  4- stub axle pins

15,-

KJØP
Hovedbilde Traxxas 8598 Sway bars (front & rear)
Traxxas 8598 Sway bars (front & rear)
  Sway bars (front & rear)

59,-

KJØP
Hovedbilde HPI 106441 Racing Pin 1.65x10mm (10)
HPI 106441 Racing Pin 1.65x10mm (10)
Racing Pin 1.65x10mm (10)         (11)

49,-

KJØP
Hovedbilde HPI 105292 Racing Upright Set
HPI 105292 Racing Upright Set
This is the Upright Set for the HPI Savage XS Flux Mini Monster Truck FEATURES: Constructed of plastic, black in color INCLUDES: Six Upright Components with four Steel Pins and four Screws REQUIRES: Installing at each wheel following instructions in manual         (11)

139,-

KJØP
Hovedbilde LouiseRC 3275BH Tire & Wheel MT-ROCK 2,8
LouiseRC 3275BH Tire & Wheel MT-ROCK 2,8" Black ...
LouiseRC 3275BH Tire & Wheel MT-ROCK 2,8" Black 1/2-offset (2) 1/2-Offset Front & Rear Fits: Traxxas STAMPEDE 2WD Front Traxxas STAMPEDE VXL 2WD Front Traxxas RUSTLER 2WD Front Traxxas RUSTLER VXL 2WD Front Traxxas SKULLY 2WD Front Traxxas CRANIAC 2WD Front Traxxas BIGFOOT 2WD Front Traxxas STAMPEDE 4x4 Front & Rear Traxxas STAMPEDE VXL 4x4 Front & Rear Traxxas JATO 2WD Rear Traxxas Nitro STAMPEDE 2WD Rear Traxxas Nitro RUSTLER 2WD Rear Traxxas Nitro Sport SE 2WD Rear HPI SAVAGE XS Flux Front & Rear HPI Jumpshot MT 2WD Front & Rear HPI Jumpshot ST 2WD Front & Rear HPI Bullet Flux MT 4WD Front & Rear HPI Bullet Flux ST 4WD Front & Rear HPI E-Firestorm 10T 2WD Front & Rear Also fits other 1/10 Scale Trucks with 12 mm hex Specs: Wheel diameter: 2.8" Tire Diameter: 126 mm Tire Width: 72 mm Weight (each): 166 g Hex: 12 mm Offset: +1/2" Tire Compound: Soft Wheel finish: Black Nylon

299,-

329,-

KJØP
-9%
Hovedbilde Tamiya 1050 Ball Bearing Set
Tamiya 1050 Ball Bearing Set
This is the 5x10mm Ball Bearing Set from Tamiya.     FEATURES Sheilded metal construction Fits a wide variety of components on R/C vehicles     INCLUDES Four 5x10mm Ball Bearings from Tamiya     SPECIFICATIONS Inner Diameter: 5mm Outer Diameter: 10mm Thickness: 4mm

79,-

KJØP
Hovedbilde HPI Racing 101226 Steering Nut 3mm (4)
HPI Racing 101226 Steering Nut 3mm (4)
This is the Steering Nut 3mm (4pcs) For the HPI Racing WR8 Car RTR FEATURES Steel construction INCLUDES Four steering nuts COMMENTS This nut can be installed on the 1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR

59,-

KJØP
Hovedbilde HPI Racing 101208 Front/Rear Upright Set Left/Right
HPI Racing 101208 Front/Rear Upright Set Left/Right
These are the Front Knuckles and Rear Uprights for the HPI WR8 and Bullet Series of Vehicles. FEATURES: Plastic construction INCLUDES: Left and Right Front Knuckles and Rear Uprights with four Hex Inserts       (11)

159,-

169,-

KJØP
-6%
Hovedbilde Traxxas 5650R Driveshafts Center E-Revo Front/Rear ... Hovedbilde Traxxas 5650R Driveshafts Center E-Revo Front/Rear ...
Traxxas 5650R Driveshafts Center E-Revo Front/Rear ...
These are the optional Center Driveshafts for use on the Traxxas E-Revo. FEATURES: Steel construction           Constant-velocity           Inner and outer dust boots INCLUDES: One Rear Center Driveshaft           One Front Center Driveshaft REQUIRES: Installation on the vehicle  

549,-

599,-

KJØP
-8%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png