Traxxas

HPI 6819 Racing Silicone O-Ring P-3 Red

Art.nr: 6819

39,-

Hpi Racing

Hpi Racing

På lager: 4

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

This is a Package of Red P-3 Silicone O-Rings for Hobby Use.
These are used in shocks, absorbing vibration, and many other uses.

FEATURES

Silicone construction.

INCLUDES

Five P3 o-rings.

REQUIREMENTS

Nothing. These are direct replacement parts.

SPECIFICATIONS

Inner diameter: 3mm (0.20")

COMMENTS

These o-rings are not limited to use only in HPI vehicles.

Produsent

Hpi Racing

Hpi Racing

Relaterte produkter

Hovedbilde HPI Racing 116868 Axle Housing End Set

HPI Racing 116868 Axle Housing End Set

Art.nr: 116868

Copied

HPI Racing 116868 Axle Housing End Set Axle Housing End Set for the Axle Housing #116867. Set includes: 1x C-Hub Left 1x C-Hub Right 2x Steering Block 2x Rear Bearing Support 8x #Z351 M3x6mm Button Head Screw This Part Fits the following kits / parts: VENTURE Scale Builder Kit VENTURE WAYFINDER - METALLIC VENTURE WAYFINDER - GUNMETAL

75,-

Kunder kjøpte også

Hovedbilde HPI 66655 - DRIVE SHAFT 6x65mm (2pcs)

HPI 66655 - DRIVE SHAFT 6x65mm (2pcs)

HPI 66655 - DRIVE SHAFT 6x65mm (2pcs) THIS PART FITS THE FOLLOWING KITS / PARTS: Savage XS Flux GT-2XS Savage XS Flux Ford F-150 SVT SAVAGE XS FLUX VGJR Savage XS Flux Chevrolet El Camino

139,-

Hovedbilde HPI 160544 SD-07WR

Hovedbilde HPI 160544 SD-07WR

HPI 160544 SD-07WR

HPI 160544 SD-07WR This water-resistant servo is ideal for bashers and racers looking for a tough and durable servo that can be used in wet conditions (e.g. rain, snow, puddles). Features: Operating Voltage: 4.8-6V 4.8V: Speed: 0.18 sec/60 degrees, Torque: 6kg-cm 6V: Speed: 0.16 sec/60 degrees, Torque: 7kg-cm Servo Spline: 25T Dimensions: Main case: 40x37.5x20.0mm (excluding mounting tabs, servo spline, & cable outlet) Mounting tab hole centres: 49.5.0x10mm Weight: 46g (excluding servo horn) NOTE: This servo is water-resistant only, meaning it is resistant to splashes and brief contact with water. It is not waterproof and therefore not suitable for submerged used. Before driving in wet conditions, make sure that all electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.

279,-

299,-

-7%

Hovedbilde HPI 101228 Racing Axle 5x40mm (2)

HPI 101228 Racing Axle 5x40mm (2)

This is a pair of 5x40mm Axles for the HPI Savage XS Flux and Bullet Vehicles. FEATURES: Steel construction INCLUDES: Two 5x40mm Axles

139,-

Hovedbilde HPI 109921 Racing HD Axle 5x40mm WR8 Savage XS Bullet

HPI 109921 Racing HD Axle 5x40mm WR8 Savage XS Bullet

This is a pair of optional Heavy Duty Axles. FEATURES Fits the HPI Bullet ST 3.0, Bullet MT 3.0, Bullet ST Flux, Bullet MT Flux and Savage XS Steel construction Reduces drivetrain wear and extends service intervals INCLUDES Two Heavy Duty Axles SPECIFICATIONS Length: 40mm Diameter: 5mm

199,-

Hovedbilde HPI Racing 106408 Wheely Bar Set

HPI Racing 106408 Wheely Bar Set

This is the Wheely Bar Set For the HPI Racing Savage XS Monster Truck FEATURES Black plastic construction INCLUDES One parts tree consisting of five parts Six screws in three sizes Two bearings Four locknuts in two sizes Installation instructions COMMENTS This wheely bar set can be installed on: Savage XS Flux 4WD Waterproof 2.4GHZ RTR Savage XS SS Kit

229,-

Hovedbilde HPI Z663 Lock Nut M3 (6pc)

HPI Z663 Lock Nut M3 (6pc)

THIS PART FITS THE FOLLOWING KITS / PARTS: Vorza Flux Savage X 4.6 Baja 5SC Bullet ST 3.0 Bullet MT 3.0 Bullet ST Flux Bullet MT Flux Baja 5b SS Kit Savage XL Flux Baja 5b D-Box 2 Baja 5B Sidewinder X5 Baja 5B TSk-b Class 1 SAVAGE XS FLUX VGJR VENTURE TOYOTA FJ CRUISER GREY VENTURE TOYOTA FJ CRUISER... VENTURE Scale Builder Kit VENTURE TOYOTA FJ CRUISER MATTE... WR8 FLUX KEN BLOCK GYMKHANA FORD... WR8 3.0 KEN BLOCK GYMKHANA FORD...STD JUMPSHOT MT V2.0 JUMPSHOT SC V2.0 JUMPSHOT ST V2.0 Savage XS Flux Chevrolet El Camino...

45,-

Hovedbilde HPI 105913 - GT-2XS Truck Body Savage XS/Unpainted ...

HPI 105913 - GT-2XS Truck Body Savage XS/Unpainted ...

#105913 - GT-2XS TRUCK BODY SAVAGE XS/Unpainted body with precut decals. Customize your Savage XS with your own unique paint scheme using the crystal-clear GT-2XS truck body! Moulded from crystal clear polycarbonate plastic for high detail, extreme durability and low weight, this is a great way to instantly customize your Savage XS! The convenient pre-cut vinyl decal sheet includes: photorealistic headlights, grille, tail lights, official logos, window frames, door handles and more, all die-cut to make applying the decals quick and easy - there's no need to cut out the decals by hand! Overspray film and pre-cut vinyl window masks are included with each body. A decal instruction sheet is included for decal placement, and the body has dimple marks for body post drill locations. Photorealistic die-cut premium vinyl decals. The body has dimple marks for body post drill locations. Overspray film and pre-cut vinyl window masks make painting fast and simple Molded from strong clear polycarbonate plastic for durability and long life. THIS PART FITS THE FOLLOWING KITS / PARTS: Savage XS SS Savage XS Flux GT-2XS Savage XS Flux Ford F-150 SVT SAVAGE XS FLUX VGJR Savage XS Flux Chevrolet El Camino

349,-

Hovedbilde Louise 3348B Wheel Crawler 1.9

Louise 3348B Wheel Crawler 1.9" Class 1 Black (2)

Louise 1.9" Class-1 Black Wheels Fits: 1/10 Scale Crawlers with 12 mm hexes Specs: Wheel diameter: 1.9" Hex: 12 mm Wheel finish: Black Nylon Scale: 1/10 Size: 1,9 Inch Suit: Crawler Drive: 12mm Hex

119,-

139,-

-14%

Hovedbilde Traxxas 2064 Servo Gear for servo TRX 2065

Traxxas 2064 Servo Gear for servo TRX 2065

-Disse passer til Summit 1/10 sine små TRX 2065 servoer. This is the replacement Servo Gear Set for the Traxxas 2065 Waterproof Sub-Micro Servo -TRX 2065 The 2065 servo is used in the E-Maxx Monster Truck Series. FEATURES: Nylon construction, white in color Replaces worn or damaged servo gears INCLUDES: One Output Gear One Top Reduction Gear One Offset Reduction Gear One Center Reduction Gear One Bottom Reduction Gear REQUIRES: Installation

59,-

Hovedbilde Traxxas 7663 Shock shafts Steel Teton (2)

Traxxas 7663 Shock shafts Steel Teton (2)

Shock shafts, steel, chrome finish (2)

65,-

Hovedbilde Tamiya 50683 M-Chassis 60D Radial Tires (1 Pair)

Tamiya 50683 M-Chassis 60D Radial Tires (1 Pair)

60D Radial Tires Tires do NOT come with Foam Inserts. Usable With: 50569, 50676, 50685, 50708, 50714, 50748, 50825 & 53341

139,-

Hovedbilde Tamiya 86055 PS-55 Polycarb Flat Clear 3 oz

Tamiya 86055 PS-55 Polycarb Flat Clear 3 oz

This is the PS-55 Flat Clear Spray from Tamiya. FEATURES: Makes it possible to give your RC vehicle the same matte finish as the actual racing car Can be applied to all colors For use on polycarbonate surfaces INCLUDES: One 100ml Spray Can of Flat Clear Tamiya Color REQUIRES: Removing protective film from body before spraying

109,-

Hovedbilde Tamiya 53255 M-Chassis 60D Inner Spring (4)

Tamiya 53255 M-Chassis 60D Inner Spring (4)

These are Hard Foam inserts for the 60D Tamiya Tires. FEATURES Hard foam construction prevents tire from deforming under pressure Split insert INCLUDES Four inserts REQUIREMENTS 60D tires SPECIFICATIONS Length: 180mm (7") Width: 22.5mm (0.885") Thickness: 10mm (0.394")

49,-

Hovedbilde Traxxas 4470 Spur Gear 32P 70T Rustler

Traxxas 4470 Spur Gear 32P 70T Rustler

This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks. Includes: One 70 tooth gear Features: Tough nylon construction Drilled for light weight Specs: Teeth-70 Pitch-32 Requires: Nothing, this is a direct replacement part. Comments: This is the same gear that comes in the truck kit.

39,-

Hovedbilde Tamiya 85041 Spray Lacquer TS-41 Coral Blue 3 oz

Tamiya 85041 Spray Lacquer TS-41 Coral Blue 3 oz

This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time. Extremely useful for painting large surfaces. 100ml is enough to fully cover two or three 1/24 scale sized car bodies. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. By combining three different paints, the decoration of plastic models will become simpler and more effective. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Coral Blue Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container. Keep out of the reach of children.

109,-

Hovedbilde Tekin 3805 Pro Crawlwer Motor Rebuild Kit ...

Tekin 3805 Pro Crawlwer Motor Rebuild Kit ...

This is the Motor Rebuild Kit for the Tekin Pro Rock Crawling Motors. FEATURES Restores performance to Tekin Pro brushed rock crawling motors with worn brushes INCLUDES Two Brushes and two Springs

119,-