Traxxas

-8%

HPI 101215 Bevel Gear 40T Savage XS/Bullet

Art.nr: 101215

115,-

~~125,-~~

- 8%

Hpi Racing

Hpi Racing

På lager: 6

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

This is the 40 Tooth Bevel Gear for the
HPI Savage XS Flux and Bullet Vehicles.

FEATURES

Sintered steel construction

INCLUDES

40 Tooth Bevel Gear

Produsent

Hpi Racing

Hpi Racing

Kunder kjøpte også

Hovedbilde HPI RACING 160162 Plazma 11.1V 3200mAh 40C LiPo ...

HPI RACING 160162 Plazma 11.1V 3200mAh 40C LiPo ...

Plazma 11.1V 3200mAh 40C LiPo Battery Pack 35.52Wh Rectangular Case 3S LiPo with T-Plug Connector & JST-XH Balance Lead Feel the Power of Plazma with the all new battery range from HPI Racing. The Plazma LiPo range is the ideal match for all HPI kits that require a durable and reliable Lithium-Polymer battery cell. This LiPo pack is suitable for any electric-powered car that requires a rectangular case 3S LiPo. Perfect for kits like the RS4 Sport 3, Savage XS, Jumpshot, & the Maverick Quantum. Specification: Voltage: 11.1V Capacity: 3200mAh C Rating (Continuous): 40C C Rating (Burst): 80C Case Type: Rectangular LiPo case, sealed plastic Dimensions: 139 x 47 x 25.4mm Connector: T-Plug Balance Lead: JST-XH Note: LiPo batteries must be charged with a LiPo-compatible charger.

399,-

549,-

-27%

Hovedbilde HPI Racing 106709 Universal Drive Shaft Set Savage XS ...

HPI Racing 106709 Universal Drive Shaft Set Savage XS ...

This is the optional Universal Driveshaft Set for the HPI Savage XS. FEATURES Fits the HPI Savage XS Flux GT-2XS, Flux Ford F-150 SVT and SavageXS Flux VGJR Machined steel construction Offers more efficient power transfer to the wheels over standard dogbones Ideal for stunts and extreme driving conditions Fully rebuildable INCLUDES Two Universal Driveshafts

579,-

599,-

-3%

Hovedbilde HPI 105811 Drive Gear 49T

HPI 105811 Drive Gear 49T

SAVAGE XS/48 PITCH/SINTERED METAL Genuine HPI quality spare part for easy maintenance and repairs. This Part Fits the following kits / parts: Savage XS Flux GT-2XS Savage XS Flux Ford F-150 SVT Savage XS Flux VGJR

79,-

Hovedbilde Axial AX1218 Bearing 5x10x4mm

Axial AX1218 Bearing 5x10x4mm

This is a pair of replacement 5x10x4mm Bearings for the Axial AX10 Scorpion Rock Crawler. FEATURES Stainless steel construction, silver in color Sealed design helps keep the bearing running smooth and friction free INCLUDES Two Bearings REQUIREMENTS Installation following the model manual SPECIFICATIONS Inside Diameter: 5mm Outside Diameter: 10mm Thickness: 4mm

69,-

Hovedbilde HPI Racing 101209 Front Hub Carriers Left/Right 10 ...

HPI Racing 101209 Front Hub Carriers Left/Right 10 ...

These are the Front Hub Carriers for the HPI WR8 and Bullet Series. FEATURES: Plastic construction INCLUDES: Left and Right Front Hub Carriers REQUIRES: Four 5x10mm Ball Bearings (11)

99,-

119,-

-17%

Hovedbilde HPI 101287 - 12T Bullet Flux Pinion

HPI 101287 - 12T Bullet Flux Pinion

HPI 101287 - 12T Bullet Flux Pinion Boost the top speed of your Bullet MT Flux or Bullet ST Flux with this option pinion gear designed specifically for the Flux Shot motor! With the stock pinion gear featuring 11 teeth, this 12-tooth pinion will give you a noticeable amount of extra top speed. THIS PART FITS THE FOLLOWING KITS / PARTS: Bullet ST Flux Bullet MT Flux RTR Bullet ST Flux W/ 2.4GHz Bullet MT Flux w/ 2.4GHz Bullet ST Flux Bullet MT Flux

115,-

Hovedbilde Traxxas 5116 Ball Bearings 5x11x4mm Revo (2)

Traxxas 5116 Ball Bearings 5x11x4mm Revo (2)

Disse lagerene er samme størrelse som Tamiya 1150 This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo. FEATURES: Metal bearing construction Blue rubber dirt shields INCLUDES: (2) 5X11mm ball bearings, Part #5116 SPECS: Inside diameter: 3/16" (5mm) Outside diameter: 7/16" (11mm) Width: 5/32" (4mm)

49,-

55,-

-11%

Hovedbilde Traxxas 5033 Silicon Shock Oil Premium 40WT (500cSt) ...

Traxxas 5033 Silicon Shock Oil Premium 40WT (500cSt) ...

Silicon Shock Oil Premium 40WT (500cSt) 60ml

99,-

109,-

-9%

Hovedbilde HPI Racing 101221 Differential Case Gasket (3)

HPI Racing 101221 Differential Case Gasket (3)

These are the the Diff Case Gaskets for the HPI Savage XS. FEATURES Fiber construction Seals differential case halves after gear replacement or maintenance INCLUDES Three Diff Case Gaskets

69,-

Hovedbilde HPI 72275 Racing Shaft 3x60mm Silver (2)

HPI 72275 Racing Shaft 3x60mm Silver (2)

Passer til HPI XS Flux. (11)

35,-

Hovedbilde Traxxas 5119 Ball Bearings 10x15x4mm Revo (2)

Traxxas 5119 Ball Bearings 10x15x4mm Revo (2)

Disse lagerene er samme størrelse som Tamiya 1510 This is a set of 10x15x4mm Ball Bearings for use on the Traxxas Revo. FEATURES: Steel Construction Shielded with blue rubber seals INCLUDES: Two Ball Bearings REQUIRES: Assembly to vehicle SPECS: Inner Diameter: 10mm Outer Diameter: 15mm Side Thickness: 4mm COMMENTS: These bearings are used to support the Primary Clutch (one needed). Tamiya 630 3X6X2.5mm Tamiya 730 3X7X3mm Tamiya 840 4X8X3mm Tamiya 850 5X8X2.5mm Tamiya 1050 5X10X4mm Tamiya 1060 6X10X3mm Tamiya 1150 5X11X4mm Tamiya 1260 6X12X4mm Tamiya 1280 8X12X3.5mm Tamiya 1480 8x14x4mm ??? Tamiya 1510 10X15X4mm Tamiya 1680 8X16X5mm

89,-

99,-

-10%

Hovedbilde Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ...

Hovedbilde Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ...

Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ...

Yeah Racing RC PTFE Bearing (5x10x4mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6013BS/10) RC Telfon Bearing (5x10x4mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

79,-

89,-

-11%

Hovedbilde Yeah Racing YB6023B/S10 RC PTFE Bearing (10x15x4mm) ...

Hovedbilde Yeah Racing YB6023B/S10 RC PTFE Bearing (10x15x4mm) ...

Yeah Racing YB6023B/S10 RC PTFE Bearing (10x15x4mm) ...

Yeah Racing RC PTFE Bearing (10x15x4mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6023BS/10) RC Telfon Bearing (10x15x4mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

99,-

119,-

-17%

Hovedbilde Yeah Racing MG-32004 HD Steel 5mm Bore Motor ...

Hovedbilde Yeah Racing MG-32004 HD Steel 5mm Bore Motor ...

Yeah Racing MG-32004 HD Steel 5mm Bore Motor ...

Yeah Racing HD Steel 5mm Bore Motor Gear/Pinions 32 Pitch 16 Teeth Description: 5mm bore 32 pitch pinions for your heavy duty and big vehicles! Made from HD steel for utmost durability and strength, prolongs the pinon's lifetime! Laser etched markings for you to clearly identify the size of the pinion with ease. Feature: For: 5mm Shaft Motors Material: HD Steel Color: Black Include: Pinion Gear (1 pc) Set Screw (1 pc)

59,-

Hovedbilde 270MM SENSOR WIRE(BLACK) : 45047

270MM SENSOR WIRE(BLACK) : 45047

270MM SENSOR WIRE(BLACK) : 45047

85,-

Hovedbilde HPI 101305 Racing Wheel Spacer Set (4)

HPI 101305 Racing Wheel Spacer Set (4)

This is the Wheel Spacer Set (4pcs) For the HPI Racing WRI and Bullet Series FEATURES: Metal construction INCLUDES: Four wheel spacers Four bushings COMMENTS: This wheel spacer set can be installed on 1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR 1/10 Bullet MT 3.0 Nitro 2.4GHz RTR 1/10 Bullet ST 3.0 Nitro 2.4GHz RTR (11)

69,-

Hovedbilde Axial 30843 Pinion Gear 32P 17T Steel 5mm Motor Shaft

Axial 30843 Pinion Gear 32P 17T Steel 5mm Motor Shaft

This is an optional Axial 5mm Bore, 17 Tooth, 32 Pitch Pinion Gear, and is intended for use with the Axial EXO Terra Buggy. Axial’s steel 32 Pitch pinion gears for the EXO Terra Buggy offer you an array of gearing options to fine tune torque and top speed. Features: 17 tooth Powder steel construction for durability Includes two set screws per package Compatible with 32P spur gears Stamped tooth count for easy identification For 5mm motor shafts

85,-

Hovedbilde Traxxas 5646 20T Pinion For 5mm Shaft

Traxxas 5646 20T Pinion For 5mm Shaft

This is a Traxxas 20 Tooth Pinion Gear for a 5mm Motor Shaft. FEATURES: Silver in color Metal construction INCLUDES: (1) 20 Tooth Pinion Gear (1) One 4mmx3.5mm set screw REQUIRES: Installation on motor shaft SPECS: Outer Diameter: 18.0mm Inner Diameter: 5mm (0.20")

69,-

Hovedbilde DynoMAX 9843 Connector Adapter T-Plug (male) - Tamiya ...

Hovedbilde DynoMAX 9843 Connector Adapter T-Plug (male) - Tamiya ...

DynoMAX 9843 Connector Adapter T-Plug (male) - Tamiya ...

DynoMAX Connector Adapter T-Plug (male) - Tamiya (male) This is an practical connector adapter for batteries with an T-Plug connector where you want to change it to an Tamiya connector without soldering etc. It also works if you have an charge lead with an Tamiya connector but you have an vehicle with a T-Plug connector system.

35,-

Hovedbilde HPI 106437 Cup Joint 5x10x15mm

HPI 106437 Cup Joint 5x10x15mm

This is the 5x10x15mm Cup Joint for the HPI Savage XS Flux Vehicle. FEATURES Steel construction INCLUDES 5x10x15mm Cup Joint

89,-

Hovedbilde HPI 106441 Racing Pin 1.65x10mm (10)

HPI 106441 Racing Pin 1.65x10mm (10)

Racing Pin 1.65x10mm (10) (11)

49,-

Hovedbilde Hitec HS-485HB Deluxe HD BB Karbonite Gear Servo

Hitec HS-485HB Deluxe HD BB Karbonite Gear Servo

This is the HS-485HB Premium Standard Servo from Hitec. FEATURES: Ideal for 1/10 scale vehicle steering and throttle applications, .20- .60 class aircraft, boats and all EP and GP .30-.50 class helis Karbonite gear train that is four times stronger than standard plastic gears Three pole motor and single ball bearing output shaft INCLUDES: HS-485HB Premium Standard Servo, 0.94" (24mm) diameter round horn, 1.2" (31mm) diameter 4-point horn, 1.3" (34mm) double arm horn, 1.2" (30.5mm) single arm horn, four each rubber grommets, eyelets and mounting screws, universal connector REQUIRES: Installing in model and connecting to control linkage and receiver SPECS: Size: 1.57 x 0.78 x 1.49" (40 x 20 x 38mm) Weight: 1.59oz (45g) 4.8V 6.0V Speed: 0.20 sec 0.17 sec Torque: 5.2 kg/cm 6.4 kg/cm Drivetrain Type: Top ball bearing

379,-