Hopp til innhold
Hjem / Radio/Servo/Motor / Motor og regulator / Tilbehør El-motorer / 270MM SENSOR WIRE(BLACK) : 45047

270MM SENSOR WIRE(BLACK) : 45047

Art.nr: 2-17804088

85,-

Modelsport AS

Modelsport AS
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

270MM SENSOR WIRE(BLACK) : 45047

Produsent

Modelsport AS

Modelsport AS

Kunder kjøpte også

Hovedbilde Zap Blue Adhesives Thread Locker .20 oz
Zap Blue Adhesives Thread Locker .20 oz
Pacer has designed this bottle of Threadlocker Compound to be        used on metal fasteners. It is not recommended for plastic parts. INCLUDES: One bottle of Pacer Threadlocker SPECS:    Size: 0.20 ounces (6ml) FEATURES: Medium strength general purpose thread locker           Locks threaded fasteners against vibration           Perfect for use in helicopters and all RC cars           Clean and dry parts for best results (removing grease, oil and dirt)           Parts can be returned to service immediately in MOST CASES           Thread locking compound comes in a Red bottle with a clear nozzle tip COMMENTS: This bottle of glue will appear big in context to the glue.  The             reason being is the glue requires a large amount of oxygen or the             glue will dry out.  All one would need to do once you have the glue             is shake the bottle and turn upside down, if the tip turns Blue             then the glue is present.  To some the bottle may appear empty.

59,-

Ikke på lager
Hovedbilde M-DRIVE Power Tool Ti-Coated Bits Set - Straight Hex - ... Hovedbilde M-DRIVE Power Tool Ti-Coated Bits Set - Straight Hex - ...
M-DRIVE Power Tool Ti-Coated Bits Set - Straight Hex - ...
M-DRIVE Power Tool Ti-Coated Bits Set - Straight Hex - 1.5, 2, 2.5 & 3mm These Ti-coated power tool bits have a 6.35mm hex (1/4") that fits our P1 cordless hobby screwdriver. Specs: Material: HSS (Ti-Coated) Straight Hex: 1.5, 2, 2.5 & 3mm Length: 100mm Hex Dimension: 6.35mm (1/4") Note that the smaller ones can be prone to brake if you dont use the tool at a straight angle Suitable for: Straight Hex 1.5mm: For M3 electric motor pinion grub screws (most 1/10 - some larger pinions use a M4 screw that needs an straight 2mm) Straight Hex 2.0mm: For M3 hex screws with countersunk head or button-head Straight Hex 2.5mm: For M3 hex screws with allen head (cylindrical) and M4 hex screws with countersunk head or button-head Straight Hex 3.0mm: For M4 hex screws with allen head or M5 with countersunk head & M5 with a button head

249,-

269,-

KJØP
-7%
Hovedbilde M-DRIVE Power Tool Ti-Coated Bits Set - Nut Drivers - ... Hovedbilde M-DRIVE Power Tool Ti-Coated Bits Set - Nut Drivers - ...
M-DRIVE Power Tool Ti-Coated Bits Set - Nut Drivers - ...
M-DRIVE Power Tool Ti-Coated Bits Set - Nut Drivers - 4, 5.5, 7 & 8mm These Ti-coated power tool bits have a 6.35mm hex (1/4") that fits our P1 cordless hobby screwdriver. Specs: Material: HSS (Ti-Coated) Nutdrivers: 4, 5.5, 7 & 8mm Length: 100mm Hex Dimension: 6.35mm (1/4") Suitable for: Nut Driver 4.0mm: For M2 nuts Nut Driver 5.5mm: For M3 nuts Nut Driver 7.0mm: For M4 nuts Nut Driver 8.0mm: For M5 nuts

239,-

KJØP
Hovedbilde Sunpadow EA0001-Deans 2S 5300mAh -100C - ERC LiPo
Sunpadow EA0001-Deans 2S 5300mAh -100C - ERC LiPo
Sunpadow EA0001-Deans 2S 5300mAh -100C - Sunpadow ERC LiPo   Sunpadow 2s 5300mAh 100C med ferdig påloddet T-kontakt (Deans). Kraftig hardcase LiPopakke med meget høy C-rating. Passer utmerket til både on- og off-road samt crawling. Batteriet leveres i egen oppbevaringseske.   Spesifikasjoner: Kapasitet: 5300mAh Spenning: 2S 7.4V C-Rating 100C Anbefalt ladestyrke:    1C Vekt: 293gram Størrelse: 139x47x26mm Kontakt: T-Plugg (Deans)

439,-

459,-

KJØP
-4%
Hovedbilde Radient 010004 Deans Male Including HEAT SHRINK (ESC ...
Radient 010004 Deans Male Including HEAT SHRINK (ESC ...
DEANS MALE INCLUDING HEAT SHRINK (ESC END) (5PCS)

45,-

KJØP
Hovedbilde DEANS FEMALE INCLUDING HEAT SHRINK (BATTERY END) ...
DEANS FEMALE INCLUDING HEAT SHRINK (BATTERY END) ...
Radient

39,-

KJØP
Hovedbilde DynoMAX 9841 Connector Adapter T-Plug (male) - EC3 ...
DynoMAX 9841 Connector Adapter T-Plug (male) - EC3 ...
9841 Connector Adapter T-Plug (male) - EC3 (female) DynoMAX Connector Adapter T-Plug (male) - EC3 (female) This is an practical connector adapter for batteries with an T-Plug connector where you want to change it to an EC3 connector without soldering etc.   It also works if you have an charge lead with an EC3 connector but you have an vehicle with a T-Plug (deans) connector system.        

49,-

KJØP
Hovedbilde Traxxas 5646 20T Pinion For 5mm Shaft
Traxxas 5646 20T Pinion For 5mm Shaft
This is a Traxxas 20 Tooth Pinion Gear for a 5mm Motor Shaft. FEATURES: Silver in color           Metal construction INCLUDES: (1) 20 Tooth Pinion Gear           (1) One 4mmx3.5mm set screw REQUIRES: Installation on motor shaft SPECS:    Outer Diameter: 18.0mm            Inner Diameter: 5mm (0.20")

69,-

Ikke på lager
Hovedbilde Axial 30843 Pinion Gear 32P 17T Steel 5mm Motor Shaft
Axial 30843 Pinion Gear 32P 17T Steel 5mm Motor Shaft
This is an optional Axial 5mm Bore, 17 Tooth, 32 Pitch Pinion Gear, and is intended for use with the Axial EXO Terra Buggy. Axial’s steel 32 Pitch pinion gears for the EXO Terra Buggy offer you an array of gearing options to fine tune torque and top speed. Features: 17 tooth  Powder steel construction for durability Includes two set screws per package Compatible with 32P spur gears Stamped tooth count for easy identification For 5mm motor shafts

85,-

KJØP
Hovedbilde HPI 101305 Racing Wheel Spacer Set (4)
HPI 101305 Racing Wheel Spacer Set (4)
This is the Wheel Spacer Set (4pcs) For the HPI Racing WRI and Bullet Series FEATURES: Metal construction INCLUDES: Four wheel spacers Four bushings COMMENTS: This wheel spacer set can be installed on 1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR 1/10 Bullet MT 3.0 Nitro 2.4GHz RTR 1/10 Bullet ST 3.0 Nitro 2.4GHz RTR       (11)

69,-

KJØP
Hovedbilde HPI 101215 Bevel Gear 40T Savage XS/Bullet
HPI 101215 Bevel Gear 40T Savage XS/Bullet
This is the 40 Tooth Bevel Gear for the HPI Savage XS Flux and Bullet Vehicles. FEATURES Sintered steel construction INCLUDES 40 Tooth Bevel Gear

115,-

125,-

KJØP
-8%
Hovedbilde Yeah Racing MG-32004 HD Steel 5mm Bore Motor ... Hovedbilde Yeah Racing MG-32004 HD Steel 5mm Bore Motor ...
Yeah Racing MG-32004 HD Steel 5mm Bore Motor ...
Yeah Racing HD Steel 5mm Bore Motor Gear/Pinions 32 Pitch 16 Teeth Description: 5mm bore 32 pitch pinions for your heavy duty and big vehicles! Made from HD steel for utmost durability and strength, prolongs the pinon's lifetime! Laser etched markings for you to clearly identify the size of the pinion with ease. Feature: For: 5mm Shaft Motors Material: HD Steel Color: Black Include: Pinion Gear (1 pc) Set Screw (1 pc)

59,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png