Hopp til innhold

Traxxas 3622A Main Chassis Gray

Art.nr: TRX 3622A

119,-

Traxxas

Traxxas

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

 This is the Main Chassis for the Traxxas Stampede XL-5

FEATURES: Nylon Construction
          Grey in Color

INCLUDES: One Grey Nylon Chassis

REQUIRES: Installation into Vehicle

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Power HD 1812MG Waterproof 18kg En god og solid vanntett servo med metallgir for de fleste formål. Med en styrke på 18kg er den godt egnet for alt fra bil til fly og øvrige hobbyprosjekter. Benytter servohorn med 25T (Futaba) splines.   Vekt 56 gram uten ledning Mål 40,7 x 20,5 x 39,5 mm Egnet for 4,5 - 6,0 volt Holdekraft 18kg/cm Hastighet 0.12sec/60° (uten belastning) Temperatur    -20 til 50 grader Presisjon 4us

299,-

329,-

KJØP
-9%
This is the Cover Gear/Wire Retainer                       For the Traxxas 1/10 Rally VXL FEATURES: Made of black plastic. INCLUDES: One cover gear           One wire retainer

39,-

KJØP
These are Replacement Washers from Traxxas. FEATURES: Black teflon construction.           Used on the axles and in the transmission. INCLUDES: (20) Washers SPECS:    Size:      5x8mm           Thickness: 0.5mm

29,-

KJØP
Disse passer Traxxas 1/16 biler.   These are Replacement Traxxas Body Clips.          They can be used on Traxxas or most other brands of cars. FEATURES: Metal clips are silver in color INCLUDES: Twelve body clips SPECS:    Length: aprrox. 7/8"  

25,-

35,-

KJØP
-29%
This is the Traxxas Titan 550 12 Turn Electric Motor. FEATURES: Stock motor supplied with the Traxxas Stampede and Rustler series           Preinstalled leads, capacitors and connectors INCLUDES: Traxxas Titan 550 Motor, two capacitors and two leads with connectors REQUIRES: Installing in vehicle SPECS:    Can Diameter: 1.25" (38mm)           Shaft Diameter:  0.12" (3mm)           Length Including Shaft: 3.2" (81mm)           Length Not Including Shaft: 2.3" (57.5mm)           Specs such as RPM are not provided

329,-

369,-

KJØP
-11%
This is a Slipper Clutch Shaft for the Traxxas Rustler XL                             and Stampede XL. FEATURES: Steel construction _         Roll pin pre-installed INCLUDES: One slipper clutch set SPECS:    Length:         1.98"          (50mm)           Diameter:        .21"          ( 5mm) COMMENTS: This part will fit both the standard and XL version of the Rustler or Stampede.

39,-

KJØP
This is the 22 tooth, hardened steel top drive gear. Fits: Traxxas Rustler VXL/XL-5 Stampede VXL/XL-5 Bandit VXL/XL-5 1/10 Slash 2WD

39,-

Ikke på lager
These are optional Front and Rear Skid Plates in Blue for the  Traxxas Electric Stampede. Also fit the Traxxas Skully and other cars in the Monster Jam series.     FEATURES Constructed of plastic, blue in color  Replaces stock black skid plates   INCLUDES Front and Rear Blue Skid Plates

89,-

KJØP
Denne erstatter TRX 1844 This is a large servo saver that can be used in Traxxas cars or any car that requires a large style servo saver. FEATURES: Tough white plastic construction. INCLUDES: 1 large servo saver and 3 adaptors that allow you to mount the saver           on most popular servos including: Futaba, Hobbico, Tower, Airtronics,           and Traxxas. Also included is a mounting screw. SPECIFICATIONS: Length: 1-3/8"                 Diameter: 1"                 The servo saver has 6 holes for mounting the steering linkages.

55,-

KJØP
This is the Reciever & Battery Hold-Down Plate for the Traxxas Stampede. FEATURES:  Plastic construction, gray in color            Metal posts and body clips INCLUDES:  One battery hold down            One receiver hold down            Two metal posts            Two body clips            Servo tape/adhesive foam pad REQUIRES:  Installation on the Stampede

59,-

Ikke på lager
These are the Traxxas 61mm Turnbuckle Toe Links  for the Traxxas Stampede.     FEATURES Metal and Nylon Construction  Silver and Black in Color  Assembled w/Rod Ends   INCLUDES Two 61mm (96mm center to center) turnbuckles   REQUIREMENTS Installation on the vehicle

99,-

KJØP
This is an optional Wheelie Bar in Blue for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, blue in color           Installs at rear of chassis to prevent vehicle from flipping over             during wheelies INCLUDES: Assembled optional Wheelie Bar with mounting instructions and             hardware REQUIRES: Fastening to rear of chassis

179,-

KJØP
This is a Traxxas 48P, 86T Spur Gear for models with                        Torque Control Slipper Clutch. FEATURES: 48 pitch           86 tooth           Designed for models with a slipper clutch.           Black plastic construction INCLUDES: One spur gear SPECS:    Pitch:   48           Tooth:   86

39,-

KJØP
These are the replacement body mounts for the Traxxas Stampede truck.  They are constructed of black plastic and are the posts that the lexan truck body attaches to. PACKAGE INCLUDES:    One front body mount    One rear body mount COMMENTS:  Does not include body clips

59,-

KJØP
Orginal dekke og felg til Stampede 4x4 både foran og bak.  This is a set of Traxxas 2.8" Mounted All Star Wheels and Tires. FEATURES: Fits the REAR of the nitro Stampede and Rustler and the                    FRONT of the electric Stampede and Rustler           2.8" All Star black chrome wheels           Talon tires with foam inserts INCLUDES: Two 2.8" mounted front talon tires, All Star chrome wheels and             foam inserts REQUIRES: Installation on the vehicle SPECS:    Outside diameter: 4.92" (125mm)           Width: 2.63" (67mm)           Inside diameter: 2.79" (71mm)           Hex Size: 12mm

379,-

KJØP
These are the Rubber Tires and Wheels for the            Wheelie Bar on the Traxxas  Wheelie Bars. FEATURES: Machined blue aluminum ball bearing equipped wheels           Rubber Tires INCLUDES: Two rubber tires, four 5x8mm ball bearings, two blue aluminum wheels REQUIRES: Attaching to wheelie bar

239,-

259,-

KJØP
-8%
This is a set of Rear Only 2.8" Mounted All Star Wheels and Tires                  for the electric Traxxas Stampede and Rustler. FEATURES: 2.8" All Star black chrome wheels           Talon tires with foam inserts INCLUDES: Two 2.8" mounted rear talon tires, All Star chrome wheels and             foam inserts REQUIRES: Installation on the rear of the Stampede or Rustler SPECS:    Outside diameter: 4.92" (125mm)           Width: 2.63" (67mm)           Inside diameter: 2.79" (71mm)           Hex Size: 12mm

369,-

KJØP
         This is an optional Wheelie Bar in Green for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, neon green in color           Installs at rear of chassis to prevent vehicle from flipping over             during wheelies INCLUDES: Assembled optional Wheelie Bar with mounting instructions and             hardware REQUIRES: Fastening to rear of chassis

179,-

KJØP
This is a Traxxas 48P, 90T Spur Gear for models                        with Torque Control Slipper Clutch. FEATURES: 48 pitch           90 tooth           Designed for models with a slipper clutch           Black plastic construction INCLUDES: One spur gear SPECS:    Pitch:   48           Tooth:   90

49,-

KJØP
 These are Shock Caps and Bottoms for Traxxas kits.                 These seal the shock containing the shock oil. FEATURES: Nylon construction INCLUDES: Two nylon shock cap (tops) Two nylon shock cap (bottoms) REQUIRES: Other shock components SPECS: Diameter Tops Bottoms 16MM 13MM COMMENTS: These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

39,-

KJØP
This is the Traxxas replacement #3631 Front Suspension Arms for for the Stampede and Rustler. FEATURES:    Made from black molded nylon    For the Traxxas Stampede and Rustler. SPECS:    Length: 3 1/4"    Thickness: 3/8"    Width at end near chassis: 1 1/2"    Width at end near wheels: 7/8" INCLUDES:    (2) Front suspension arms for the Traxxas Stampede.

99,-

KJØP
This is the replacement Servo Case and Gasket Set for the Traxxas                 2056 - and 2075 (we don't stock) Servos FEATURES: Three piece plastic case molded in blue and black color           Replaces worn or damaged servo cases and gaskets INCLUDES: One Upper Case (blue plastic)           One Middle Case (blue plastic)           One Lower Case (black plastic)           One Upper Case Gasket           One Lower Case Gasket           One Output Shaft O-Ring           Four Case Screw O-Rings REQUIRES: Assembly  

79,-

KJØP
This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.          The front suspension arm hinge pins pass through this piece. FEATURES: Gray nylon construction INCLUDES: One front bulkhead REQUIRES: Nothing.  This is a direct replacement part. SPECS:    Length: 73.6mm (2.90")           Width: 41mm (1.62")           Height: 29mm (1.14") COMMENTS: This part is used on the following vehicles:             Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,             Rustler XL and Stampede XL.

79,-

Ikke på lager
 This is a replacement set of skid plates for the Traxxas Stampede. FEATURES: Made of black molded nylon For the Traxxas Stampede SPECS:    Length of front plate: 5 5/8"    Thickness of front plate: 3/16"    Width of front plate: 2 1/8"    Length of rear plate: 4 3/8"    Thickness of rear plate: 1/8"    Width of rear plate: 2 1/8" INCLUDES:    (1) Front skid plate    (1) Rear skid plate

89,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png