Hopp til innhold
-8%

Traxxas 5186A Mounted Wheelie Bar Tires/Wheels Blue (2)

Art.nr: TRX 5186A

239,-

259,-

- 8%
Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

These are the Rubber Tires and Wheels for the
           Wheelie Bar on the Traxxas  Wheelie Bars.


FEATURES: Machined blue aluminum ball bearing equipped wheels
          Rubber Tires


INCLUDES: Two rubber tires, four 5x8mm ball bearings, two blue aluminum wheels


REQUIRES: Attaching to wheelie bar

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 5185
Copied
These are the Rubber Tires for the          Wheelie Bar for all Traxxas vehicles. Dette er dekk til TRX 5186 og TRX 5186A. FEATURES: Constructed of rubber, black in color with with "TRAXXAS" written in             white on the sidewalls INCLUDES: Two Rubber Tires for the Wheelie Bar REQUIRES: Fastening to wheels SPECS:    Outer Diameter: 1.1"  (29mm)           Inner Diameter: 0.75" (19mm)           Width:          0.51" (13mm)

85,-

KJØP
Art.nr: TRX 5472
Copied
This is the optional Assembled Wheelie Bar for all versions              of the Traxxas Revo except the 1/16 E-Revo. FEATURES: Nylon construction           Black in color INCLUDES: One Assembled Wheelie Bar REQUIRES: Installation on the Traxxas Revo Sjekk : Trx 5186 eller Trx 5186A

249,-

279,-

KJØP
-11%
Art.nr: TRX 5186
Copied
These are the Rubber Tires and Wheels for the          Wheelie Bar for all Traxxas vehicles. FEATURES: Tires constructed of rubber, black in color with with "TRAXXAS"             written in white on the sidewalls           Aluminum wheels, anodized red in color INCLUDES: Two Rubber Tires Trx 5185  four 5x8mm Ball Bearings, four Axles and             two Wheels REQUIRES: Attaching to wheelie bar

239,-

259,-

KJØP
-8%

Kunder kjøpte også

   This is an 18 Meter Roll of 18mm Tamiya Masking Tape. FEATURES: This is a thin, self-adhesive paper tape, developed for model             applications.           Flexible.           Easily applied to curved surfaces making it ideal for masking off             areas for painting, etc.           Comes in a plastic, reusable dispenser.           Dispenser teeth cuts the tape to your desired length. INCLUDES: One Roll Of Masking Tape SPECS:    Length: 18m           Width:  18mm

79,-

KJØP
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-33 Cherry Red).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-10 Purple).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.                                        

109,-

KJØP
This is the optional Blue Aluminum Motor Mount for the                             Traxxas Slash 4X4 FEATURES: 6061-T6 aluminum construction, blue in color   INCLUDES: One blue anodized motor mount and hardware.   REQUIRES: Installation following original kit manual    

479,-

499,-

KJØP
-4%
Traxxas 5452X - U-Joints Set U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm headed pin (4)/ 4x15mm screw pin (2)/ hex pin (2)/ e-clips (6)/ 3x6x0.5 MW (4)) (metal parts for 2 driveshafts) Driveshaft U-joint rebuild kit. Includes carriers (4), cross pins (4), headed pins (4) screw pins (2), hex pins (2), and E-clips (6). Rebuilds 2 driveshafts. Replacement part for these models: Ford® Fiesta® ST Rally Brushless Maxx® Rustler® 4X4 Brushless Slash® 4X4 Brushless Stampede® 4X4 Brushless

129,-

139,-

KJØP
-7%
Komplett FPV mode App-kompatibel 7min flytid Flere kule funksjoner! UDI her med en tøff liten drone med funskjoner som auto takeoff/landing, stabilisering av flyretning og høyde for å nevne noe. Om du ønsker å fly i sanntid plasserer du enkelt smarttelefonen din i mobilholderen på radio og kobler dronen opp mot UDI-appen! PS! Produkt kan avvike fra video. Klippet er lagt til som relevant opplysning til produktet, men er ikke nødvendigvis identisk. Innhold i en produktvideo, testvideo eller et review kan avvike fra produktet som selges. Dette kan gjelde farger, spesifikasjoner, versjonsforskjeller, regionsforskjeller m.m. Det er produktets navn, beskrivelse og bilder du skal forholde deg til ved kjøp av varen.   Funksjoner Live-feed Bilde til telefon i 480P / 20fps Høydehold-modusen Gjør flyturen mer stabil og enklere å kontrollere. Du kan la Beetle holde seg i en viss høyde slik at den kan filme bedre Takeoff/Landing Dronen vil ta av/lande automatisk som gjør start og slutt på flyturen enda mer bekymringsfri Hold mode Hvis du ønsker hjelp med å holde retningen på dronen kan du aktivere kursholdmodus i begynnelsen av flyturen, og dermed kan du fly dronen enkelt Kamerajustering Kamera kan justeres med 90 grader om du f.eks ønsker et bredere bilde, dette gjøres via appen "Flyingsee" Alarm Beetledronen er utstyrt med alarmer som gir deg beskjed om du flyr for langt unna og lavt batteri FPV Ved bruk av appen kan du få livebilde fra dronen som gir deg muligheten til å fly i sanntid Eskens innhold I esken finner du UDI Beetle dronen, radio, usb-lader, 1x 3,7V 500mah LiPo-batteri, skrujern, propellverktøy og propeller. Du behøver 4stk AA-batterier. PS! Det medfølger kun 1x drivbatteri til dronen, selv om det på noen bilder/klipp kan være avbildet flere. Batteriene er enkelt utskiftbare og ytterligere kan kjøpes separat. Spesifikasjoner Flytid 6-7min Ladetid 75min Rekkevidde radio Opp til 50m Rekkevidde FPV Opp til 20-30m Batteri 3.7V 500mah LiPo Dimensjoner 140x140x43.5mm Vekt 63g  

749,-

799,-

KJØP
-6%
Denne passer også til: Stampede 4X4 BL-2s TRX 67154-4 og Stampede 4X4 VXL TRX 90376-4 Body, Hoss® 4X4 VXL (clear, requires painting)/ window, grille, lights decal sheet From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and paint makes it easy to get professional quality results. Traxxas clear bodies come fully-trimmed with pre-drilled body holes for easy mounting. There's also a protective overspray film applied to the body. Window masking and decals also come in the

299,-

329,-

KJØP
-9%
Driveshaft assembly, front, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with #9080 upgrade kit) Replacement front driveshaft for the Extreme Heavy Duty Upgrade Kit. Driveshafts are for use with the 9080 upgrade kit only and will not fit standard suspension parts. Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4

159,-

KJØP
Driveshaft assembly, rear, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with #9080 upgrade kit) Replacement rear driveshaft for the Extreme Heavy Duty Upgrade Kit. Driveshafts are for use with the 9080 upgrade kit only and will not fit standard suspension parts. Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4

159,-

KJØP
Traxxas 9225 Bumper Rear Ford Bronco 2021  

79,-

KJØP
Traxxas 9224 Bumper Front for Winch TRX-4 Ford Bronco 2021 Bumper, front/ winch/ winch mount (assembled)

179,-

KJØP
Traxxas HOSS 4x4 VXL Body Mount front/rear

219,-

KJØP
 Tailgate protector/ 3x10mm flat-head screw (3)

49,-

KJØP
Skid plate, roof (body) (black) (left & right)/ 3x8mm CS (4)

49,-

KJØP
Body support/ 3x12mm CS (4) / (fits #9011 body)

89,-

KJØP
Body Reinforcement Set (Body #9011)

59,-

KJØP
It’s back, and ready to obliterate unfriendly terrain just like before! This time, the Tamiya Super Clod Buster appears as a special Black Edition, with new colors for the body and components, a brand-new sticker design and more! Two Motors and 4WS System The Super Clod Buster is equipped with two motors and tightly sealed gearboxes that have been molded as one piece with axle housing. Minimum power loss and smooth cornering are obtained thanks to gear train transmission and differentials. The included Dual Motor ESC provides ample power to get your truck over obstacles. Furthermore, this monster truck is also equipped with a 4WS system for 4-wheel drive steering. This feature makes tight cornering with such a big machine easy! • 1/10 scale R/C model assembly kit. Length: 480mm, width: 380mm, height: 340mm. • The truck body is injection molded in black plastic, with detail and realism. Metal- plated parts are included to depict front grille, supercharger air intakes and roll bars. • Red plastic bumper and damper components. • The model is based around a bathtub chassis frame, endowed with rigid link suspension and two springs on each wheel that provide ground clearance of 55mm and a superb off-road drive. • Four-wheel steering. • Two Type 540 motors included. • Included: Hobbywing Produced ESC (Tamiya Specification TEU-201 BK) • New Sticker design. • Requires: 2 or 3 channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and TS paint. TEU-201 BK (For Twin Motor) ESC • Compact forward/reverse electronic speed controller for twin-motor R/C models such as Super Clod Buster. • Large aluminum heat sink and cooling fan allow effective heat dissipation. • Low voltage protection function limits potential for over discharging of battery pack. • Compatible with not only NiCd battery packs but also LF battery packs and NiMh batteries. • Features overheat protection function. • LED warnings indicate no-signal status and show protection function status. • Built-in BEC (6V/4A) is compatible with servos such as digital servos. • Features Tamiya battery connectors. Specifications: • Compatible receiver: Ground use R/C receiver • Control system: High-frequency system (8Khz) • Max continuous current: (FET Spec): 80A • Functions: Forward, reverse, and brake • Output: Forward 100%, reverse 75% • Power Supply voltage: 606V-7.2V • Receiver output: BEC 6V/4A • Compatible motor: Sport Tuned Motor or brushed motor of 25 turns and above. • Dimensions (including protruding sections): 47.0X36.5X26.5mm (39.0mm including cooling fan) • Weight: 77.5g  

4.695,-

4.895,-

KJØP
-4%
 This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin,             styrofoam and wood.           Excellent for either brush or spray painting.           Covers well, flows smoothly with no blushing or fading, and can be             blended easily.           Jar will accept standard airbrush lid.           Can be washed away with plain water if done prior to curing.           Available in 19 glossy, 45 flat and 7 translucent colors plus an             exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic White REQUIRES: Paint Brush or Airbrush to apply to model.           Eye, Lung and Skin protection.           Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children.           Highly Flammable Paint.           For Adult Modelers Only.

30,-

KJØP
This is Tamiya Color for Aircraft Spray Paint (PS-53 Lame' Flake)                         For Adult Modelers Only. FEATURES: Specially developed for finishing aircraft models. The color is             formulated to provide the authentic tone to 1/32 & 1/48 scale             model aircraft           The paint is a synthetic lacquer that cures in a short period             of time           Extremely useful for painting large surfaces           The color of the lid represents the color of paint INCLUDES: (1) Spray Can of Paint SPECS:    Net Volume: 3.4oz (100ml) COMMENTS: Highly flammable.

179,-

KJØP
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-13 Gold).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.                    Highly flammable.

109,-

KJØP
Denne erstatter TRX 6845  This is the replacement Steering Bellcrank Set for the Traxxas Slash 4X4. FEATURES: Composite nylon construction, black in color           Replaces a worn or damaged bellcrank set INCLUDES: One Left Bellcrank Lower           One Left Bellcrank Upper           One Right Bellcrank           One Draglink           One Spring Retainer           Two Servo Arms           Two Shoulder Screws           Two 3x15 Counter Sunk Machine Screws           Two Hallow Balls REQUIRES: Assembly and installation following the model manual and included              instruction sheet

149,-

169,-

KJØP
-12%
Traxxas Heat sink - fits #3351R (Velineon 3500) and #3461 (Velineon 540XL) brushless motors The 3458 heat sink fits Velineon brushless motors #3351R and #3461 when installed in 4X4 vehicles. (Does not fit 2WD configurations). For more information on installing the heatsink and fan shroud, read the following article.

129,-

KJØP
Lock Nut Flanged M4 Alu Red (4)

99,-

109,-

KJØP
-9%
Cooling Fan Kit (Velineon 3500/ 540XL) (Need Heat Sink #3458

299,-

329,-

KJØP
-9%
Traxxas 10743 - Steering bellcranks (2)/ draglink (1)/ steering link (1)

89,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png