Traxxas

Traxxas 2531X Suspension Arms Front (2)

Art.nr: TRX 2531X

129,-

Traxxas

Traxxas

På lager: 4

På lager i vår butikk i Oslo

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Denne erstatter TRX 2531

These are the Replacement Front Suspension Arms for many Traxxas kits.
These are located on the front bulkhead and are held on by suspension pins.

FEATURES: Nylon construction
Black in color

INCLUDES: Two black nylon suspension arms

REQUIRES: Assembly onto kit.

SPECS: Length: 3"
Width: 1.2"

COMMENTS: This will work on the Bandit, Nitro Stampede, Nitro Rustler, SRT,
and the Nitro Sport.

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

Hovedbilde

"Bulk" Traxxas 2531X Suspension Arms Front (2)

Art.nr: BULK TRX 2531X

Copied

Denne erstatter TRX 2531 *** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 2531X Suspension Arms Front (2) These are the Replacement Front Suspension Arms for many Traxxas kits. These are located on the front bulkhead and are held on by suspension pins. FEATURES: Nylon construction Black in color INCLUDES: Two black nylon suspension arms REQUIRES: Assembly onto kit. SPECS: Length: 3" Width: 1.2" COMMENTS: This will work on the Bandit, Nitro Stampede, Nitro Rustler, SRT, and the Nitro Sport.

129,-

På lager 1

Hovedbilde RPM 73282 Heavy Duty Rear A-Arms Black Bandit

RPM 73282 Heavy Duty Rear A-Arms Black Bandit

Art.nr: 73282

Copied

Traxxas Bandit Rear A-arms – Black Quick Notes: – replaces stock Traxxas #2750R – reduced hinge pin slop – larger bosses around hinge pins for additional strength Description. RPM Rear A-arms for the Traxxas Bandit are finally here to strengthen the rear end of these already tough 1/10th scale buggies. RPM rear Bandit A-arms incorporate stock suspension geometry yet are vastly stronger and much more aesthetically pleasing than stock A-arms. Additionally, we’ve beefed up the hinge pin bosses by roughly 20% while reducing hinge pin slop for camber and rear toe settings that don’t move! All this strength and our A-arms are roughly 8% lighter than stock! Combine these rear A-arms with a set of RPM #80492 Front A-arms for bulletproof performance at all four corners of your Bandit!

159,-

** Ikke på lager

Hovedbilde RPM 80492 Front A-Arms Black Nitro Traxxas ...

RPM 80492 Front A-Arms Black Nitro Traxxas ...

Art.nr: 80492

Copied

These are the optional A-Arms (Supension Arms) for the Traxxas Nitro Rustler These mount to the bulkhead and the hubs mount to it. FEATURES Heavy Duty Nylon Construction Black in Color Two Pre-Drilled Shock Mounting Positions For the Front of the Nitro Rustler INCLUDES Two Front Black A-Arms Two 3mm x 18mm Machine Thread Socket Head Cap Screws One RPM Decal Sheet w/ Two RPM Logos REQUIREMENTS Assembly onto Vehicle. SPECIFICATIONS Length: 3.1" (79mm) Width at Bulkhead: 1.5" (38mm) Width at Hub: 1.09" (27mm) Thickness: .33" (8.5mm)

139,-

På lager 1

Kunder kjøpte også

Hovedbilde Traxxas 2530-BLK Bulkhead Front Black

Traxxas 2530-BLK Bulkhead Front Black

This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles. The front suspension arm hinge pins pass through this piece. FEATURES: Black nylon construction INCLUDES: One front bulkhead REQUIRES: Nothing. This is a direct replacement part. SPECS: Length: 73.6mm (2.90") Width: 41mm (1.62") Height: 29mm (1.14") COMMENTS: This part is used on the following vehicles: Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede, Rustler XL and Stampede XL.

79,-

89,-

På lager 1

-11%

Hovedbilde

"Bulk" Traxxas 2437 Front Axles Bandit

*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 2437 Front Axles Bandit This is a pair of Front Axles for the Traxxas Bandit Buggy Kit and the Ready To Run version. FEATURES: Constructed of steel. INCLUDES: Two Front Axles for the Traxxas Bandit Buggy Kit and Ready to Run Version SPECS: Length: 0.94" (24mm) Length of threaded area: 0.14" (3.5mm) Thread size: 0.16" (4mm) REQUIRES: Placing each axle into the Steering Blocks TRX 3636, and installing Stub Axle Pins TRX 2754.

39,-

Bulkvarer kan kun kjøpes når de er på lager

Hovedbilde Traxxas 5833 Nerf Bars LCG Black (Pair) Slash 2WD

Traxxas 5833 Nerf Bars LCG Black (Pair) Slash 2WD

Traxxas 5833 Nerf Bars LCG Black (Pair) Slash 2WD These are the Low CG Nerf Bars in Blue for the 1/10 scale 2WD Traxxas Slash. FEATURES Plastic construction, Black in color For use with the Low CG chassis in Black, or Blue Fastens to sides of chassis to absorb impacts INCLUDES Two Nerf Bars

49,-

På lager 2

Hovedbilde Traxxas 5832 Chassis LCG Slash 2wd Black (1)

Traxxas 5832 Chassis LCG Slash 2wd Black (1)

Chassis, low CG (black)

229,-

249,-

På lager 2

-8%

Hovedbilde Traxxas 2445 Turnbuckle 55mm Complete (2)

Traxxas 2445 Turnbuckle 55mm Complete (2)

Turnbuckles, toe link, 55mm (75mm center to center) (2) (assembled with rod ends and hollow balls)

99,-

109,-

På lager 3

-9%

Hovedbilde Traxxas 2443 Camber Link Rear 56mm(cc) Complete (2)

Hovedbilde Traxxas 2443 Camber Link Rear 56mm(cc) Complete (2)

Traxxas 2443 Camber Link Rear 56mm(cc) Complete (2)

Turnbuckles, camber link, 36mm (56mm center to center) (rear) (assembled with rod ends and hollow balls) (1 left, 1 right)

79,-

89,-

På lager 6

-11%

Hovedbilde Traxxas 5831 Lower Chassis Low CG Black

Traxxas 5831 Lower Chassis Low CG Black

This is the Lower Chassis for use with the optional Traxxas #5830 Slash 2WD Low CG Conversion Kit. FEATURES Plastic construction, black in color Fastens under front section of low CG chassis INCLUDES Lower Chassis in Black SPECIFICATIONS Length: 5.6" (142mm) Width: 3.1" (79mm) at widest point COMMENTS Must be used with the #5830 Low CG Conversion Kit. Will not fit on stock Slash 2WD chassis.

79,-

89,-

På lager 1

-11%

Hovedbilde Traxxas 3740 Pins 2.5x31.5mm Rustler (2)

Traxxas 3740 Pins 2.5x31.5mm Rustler (2)

This is the 2.5x31.5mm Pins with E-clips. FEATURES: Made of stainless steel This is used to hold the front steering block (TRX 3636) to the castor block ((TRX 3632) on the electric (not Nitro) Rustler Also called the vertical kingpin INCLUDES: 2 Pins (kingpins) 4 2.5mm e-clips

29,-

På lager 8

Hovedbilde Traxxas 3652 Stub Axle Carrier

Traxxas 3652 Stub Axle Carrier

This is the Traxxas #3652 Stub Axle Carrier that comes included with the Rustler and Stampede trucks. FEATURES: Made of a black plastic/nylon material. Also called the rear hub or hub carrier. Has 2 possible mount locations for the outer hinge pin shaft. INCLUDES. 2 Stub alxe carriers. COMMENTS: This holds the two 5x8mm bushings (or bearings) on the stub axle also called the wheel shaft.

39,-

På lager 3

Hovedbilde Traxxas 3743A Aluminum Steering Bellcranks Blue ...

Hovedbilde Traxxas 3743A Aluminum Steering Bellcranks Blue ...

Traxxas 3743A Aluminum Steering Bellcranks Blue ...

This is the Blue Aluminum Steering Bellcrank from Traxxas. FEATURES: Metal construction, anodized blue in color Factory assembled and ready to install INCLUDES: One red-anodized T6 aluminum steering bellcrank Four 5x8mm ball bearings Hardware REQUIRES: Installation COMMENTS: Also available in red.

379,-

399,-

Ikke på lager

-5%

Hovedbilde Traxxas 3729A Upper Chassis Grey Bandit/Rustler

Traxxas 3729A Upper Chassis Grey Bandit/Rustler

Traxxas 3729A Upper Chassis Grey Bandit/Rustler

69,-

På lager 1

Hovedbilde RPM 81164 Wide Front Bumper for 2WD Bandit, Rustler & ...

Hovedbilde RPM 81164 Wide Front Bumper for 2WD Bandit, Rustler & ...

RPM 81164 Wide Front Bumper for 2WD Bandit, Rustler & ...

RPM Wide Front Bumper for 2WD Bandit, Rustler & Stampede - Green Replaces stock Traxxas #2735 Quick Notes: Fits the Electric Stampede, Electric Rustler, Bandit, Nitro Sport, Nitro Stampede & Nitro Rustler Replaces stock Traxxas #2735 Give your favorite Traxxas vehicle added protection with the RPM wide front bumper. This bumper stands six inches wide and adds an extra 1-1/2” worth of bulletproof, RPM protection to the front end of the vehicle. RPM designed this bumper with the backyard basher in mind by making it with our guaranteed unbreakable blend of nylons and is molded in black, blue, green and red. This bumper will help reduce front-end damage during head on collisions with curbs, trees, etc!

99,-

På lager 3

Hovedbilde Traxxas 2414 Wing Wire

Traxxas 2414 Wing Wire

This is the Wing Wire from Traxxas. FEATURES Prebent steel wire fastens rear wings to chassis on Traxxas cars INCLUDES Wing Wire SPECIFICATIONS Length: 2.4" (62mm) Width: 2.0" (52mm) Wire Diameter: 0.079" (2mm)

29,-

39,-

På lager 1

-26%

Hovedbilde RPM 70992 Precision Camber Gauge

RPM 70992 Precision Camber Gauge

Precision Camber Gauge Quick Notes: – works with tires up to 4.5 inches (114mm) and taller* – accurate to within ½° Description One of the most critical suspension adjustments on a R/C vehicle is the vehicle’s camber. RPM has proven time after time that even the most experienced drivers cannot set their camber by “eye”. With our Camber Gauge, novice to professional drivers alike can set their camber on all wheels to less than one degree of accuracy! Once camber has been set and documented, this gauge will be able to tell you if a crash has affected your camber! When used in conjunction with #70492 toe-in gauge, you’ll gain a distinct advantage over anyone that does not have our gauges! RPM’s Camber Gauge is the only tool that allows you to do track-side checks in a matter of seconds!

139,-

** Ikke på lager

Hovedbilde Traxxas 2470A Tires & Wheels 2,2

Traxxas 2470A Tires & Wheels 2,2" Alias/Tracer Medium ...

Tires & wheels, assembled (Tracer 2.2" black chrome wheels, Alias 2.2" tires) (2) (Bandit rear, medium compound with foam inserts) (TSM rated)

319,-

349,-

På lager 1

-9%

Hovedbilde RPM 73752 Front Bulkhead Black 1/10 Traxxas 2WD

RPM 73752 Front Bulkhead Black 1/10 Traxxas 2WD

Front Bulkhead for most 1:10 scale Traxxas 2wd Vehicles Quick Notes: – replaces stock Traxxas #2530 & #2530A – fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants) Description One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes: RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants). It does not fit the 4×4 versions of any of these vehicles.

179,-

** Ikke på lager

Hovedbilde Traxxas 2478R Anaconda 2.2

Traxxas 2478R Anaconda 2.2" Mounted Rear Bandit (2)

This is the Rear Tire and Wheel set for the Traxxas Bandit. FEATURES: Rubber Anaconda 2.2" tires Split X-Pattern tread Foam inserts Tracer 2.2" chrome wheels INCLUDES: Two rear tires for the Bandit REQUIRES: Mounting to Wheels SPECS: Diameter: 3.46" (88mm) Width: 1.65" (42mm)

339,-

369,-

På lager 1

-8%

Hovedbilde Traxxas 2970 EZ-Peak Plus 4A NiMH/LiPo AC Fast Charger ...

Hovedbilde Traxxas 2970 EZ-Peak Plus 4A NiMH/LiPo AC Fast Charger ...

Traxxas 2970 EZ-Peak Plus 4A NiMH/LiPo AC Fast Charger ...

EZ-Peak® Plus 4-amp NiMH/LiPo Fast Charger with iD® Auto Battery Identification One connection does it all! The Traxxas iD® battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak® Plus recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus (#2970) does all the work for you. The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards. At the press of a button, the EZ-Peak Plus' Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. 4-amp fast charging and advanced high-resolution peak detection deliver a perfect charge every time. The EZ-Peak Plus is backed by the Traxxas Lifetime Electronics Warranty for years of reliable service. 1, 2, 3... Easy Steps! QUICK FEATURES ON EZ-PEAK PLUS (#2970) CHARGER Recognizes Traxxas iD® batteries to automatically program and optimize charger settings Charge progress indicator Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface Built-in cooling fan Advanced Mode for full manual control of charger settings Legacy support for all Traxxas High-Current Connectors Built-in balance ports for conventional LiPo batteries Charges 5-8-cell NiMH batteries Charges 2s and 3s LiPo batteries EZ-PEAK PLUS (#2970) SPECIFICATIONS AC Input: 100–240 Volts Charge Current Range: 1.0-4.0A (40W Max.) Discharge Current Range: 500mAh Current Drain For Balance Ports: 500mAh NiMH Battery Cell Count: 5–8 Cells LiPo Cell Count: 2–3 Cells Net Weight: 365g Dimensions: 146 x 123 x 53mm MODEL 2970: EZ-Peak® Plus 4-amp NiMH/LiPo Fast Charger with iD® Auto Battery Identification.

699,-

769,-

På lager 10

-9%

Hovedbilde Traxxas 3636 Steering Block (2)

Traxxas 3636 Steering Block (2)

Traxxas Bandit. They are made of black reinforced nylon and are what the front axles go through. Steering blocks, left & right (2) (requires 5x11x4mm bearings) PACKAGE INCLUDES: Two steering blocks (one left and one right)

39,-

På lager 1

Hovedbilde Traxxas 3956 Spur Gear 0.8P 54T

Traxxas 3956 Spur Gear 0.8P 54T

This is the 54 Tooth Spur Gear. FEATURES: Nylon construction Black in color .8 Module pitch INCLUDES: One 54T 0.8 Pitch Spur Gear REQUIRES: Assembly onto vehicle

39,-

På lager 6

Hovedbilde Traxxas 2637 Suspension pins, 31.5mm, chrome (2) w/ ...

Traxxas 2637 Suspension pins, 31.5mm, chrome (2) w/ ...

Suspension pins, 31.5mm, chrome (2) w/ E-clips (4)

35,-

** Ikke på lager

Hovedbilde Traxxas 3625 Mounting Plate, Speed Control XL-5/XL-10

Traxxas 3625 Mounting Plate, Speed Control XL-5/XL-10

Mounting plate, speed control (XL-5, XL-10) (fits into Bandit, Rustler, Stampede and 4-Tec)

35,-

På lager 2

Hovedbilde Traxxas 3639 Shock Tower Front

Traxxas 3639 Shock Tower Front

This is a stock replacement FRONT shock tower for the Traxxas Stampede. FEATURES: Made from black molded nylon For the Traxxas Stampede SPECS: Height: 2 3/4" Thickness: 1/4" Width at base: 2 3/4" Width at top: 2" INCLUDES: (1) Front shock tower for the Traxxas Stampede

59,-

På lager 1

Hovedbilde Traxxas 2444 Camber Link Front 67mm(cc) Complete (2) ...

Traxxas 2444 Camber Link Front 67mm(cc) Complete (2) ...

Turnbuckles, camber link, 47mm (67mm center to center) (front) (assembled with rod ends and hollow balls) (1 left, 1 right)

89,-

På lager 2

Hovedbilde Traxxas 2615 Wing Buttons (2)

Traxxas 2615 Wing Buttons (2)

Wing buttons (2)/ set screws (2)/ spacers (2)/ 3x8mm CS (2)

29,-

39,-

På lager 3

-26%