Hopp til innhold

BSD 903-031 Servo Saver Unit

Art.nr: 45-903-031

115,-

BSD

BSD

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Kunder kjøpte også

Body Clips Small/Blue (10 Pcs)

57,-

KJØP
Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw   For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

KJØP
Main Gear-51T

79,-

KJØP
Louise B-PIRATE 1/8 Buggy Soft Race Tires on White Wheels X-stud pattern ideal for loose (dry and loamy), hard packed (wet) and abrasive (dry) track surfaces. Equipped with a factory installed grooved insert. Fits: XRAY XB8 XRAY XB8E Right 1/8 Fighter Right 1/8 E-Fighter Also fits other 1/8 Buggies with 17 mm hexes Specs: Wheel diameter: 82 mm Tire Diameter: 116 mm Tire Width: 42.8 mm Weight (each): 119 g Hex: 17 mm Tire Compound: Soft Wheel finish: White Nylon

249,-

269,-

KJØP
-7%
FRONT SUSPENSION ARM PIN-SHORT

39,-

KJØP
FR/RR BODY MOUNT

49,-

KJØP
WATER PROOF SPEEDCONTROLLER BRUSHED ESC for bil, SPRUTSIKKER DEANS KONTAKT   WP1040 BRUSHED : Constant 45A Input: 4-9 cells NiMH/NiCd or 2-3S LiPo.   BEC: 5V/2A 

499,-

529,-

KJØP
-6%
  These are the replacement Body Clips for                     the Traxxas Nitro Revo Monster Truck. FEATURES: Metal Construction           Silver in Color           Bent for Easy Removal INCLUDES: Ten Bent Silver Metal Body Clips REQUIRES: Assembly onto Vehicle

39,-

Ikke på lager
This is a replacement antenna tube. Antenna tubes are used to help secure and protect reciever antenna wires. INCLUDES: 1 blue antenna tube and 1 black antenna tube cap. SPECIFICATIONS: Length: 11"                 Outside Diameter: 1/8"

29,-

KJØP
 6PC Phillips Screw Driver Set No. 0000, 000, 00, 0. No. 0, 1.

479,-

499,-

KJØP
-4%
Left/Right Steering Arm

69,-

KJØP
DynoMAX Connector Adapter T-Plug (male) - Tamiya (male) This is an practical connector adapter for batteries with an T-Plug connector where you want to change it to an Tamiya connector without soldering etc. It also works if you have an charge lead with an Tamiya connector but you have an vehicle with a T-Plug connector system.

35,-

KJØP
  Bullet Connector Diameter: 4mm Bullet Connector Length: 12.5mm Total Length: 18.5mm Max Wire Diameter: 3mm Outer Diameter: 4.75 mm

209,-

KJØP
  Propeller plastic

85,-

KJØP
Stinger Performance Motor Powerful, Stinger 20-turn modified motor, 30% faster than the typical stock motor! A "20-turn" single (which is the designation of the Stinger motor) indicates that a single thickness of wire is wound 20 times around the armature of the electric motor. The less times the wire is wound; the faster the motor will go. The thickness of wire around the armature determines how much torque the motor puts out. So, a 20-turn double would provide more torque than the 20-turn single. Remember, a more modified motor must be geared properly in order to achieve its maximum performance and may also eat up your battery causing you to have shorter run times. The Stinger motor is a mild modified motor that gives you alot of speed and still gives you around 6-10 minutes of run time, depending on how you have your car set-up and what kind of batteries you are using.

249,-

269,-

KJØP
-7%
FR/RR C-CAarrier 4mm Screws

69,-

KJØP
Axle w/pin

59,-

KJØP
Performance & Reliability Built with high-quality components and coupled with cutting-edge firmware, the Seaking 60A V3.1 is featured by unmatched performance and reliability. Multiple safety adjustable options are in use, with the implementation of the low-voltage cutoff protection, thermal protection and throttle signal loss protection.   Efficient Cooling System The Hobbywing patented heat-conductive copper bar cover on the power board of the Seaking 60A V3.1 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keeping your ESC as cool as possible.   Waterproof Design and Built-in BEC 100% waterproof without the need of extra protection. The built-in switch mode BEC with a maximum output of 6Amp and voltage of 6V make this ESC compatible with high voltage servo.   Special Algorithm Design The special algorithm implemented in the ESC make the acceleration more incredible and sailing more stable.   Separate PRG/FAN Port The separate PRG/FAN port on the ESC can connect ESC to a program box (via the trio-color programming cable) and start ESC programming. Specifications Brushed/Brushless: BL Waterproof: Yes Cont./Peak Current: 120A/720A Input: 2-6S LiPo, 6-18 Cells NiMH BEC Output: Linear Mode:6V/5A Wires & Connectors Input Wires:  Red-12AWG-200mm*1 Black-12AWG-200mm*1 Output Wires: Black-12AWG-150mm*3 Input Connectors: No Output Connectors: No (Note: All the wire length above is the original length not the length you see from the outside.) ESC Programing via Transmitter: Supported LED Program Box: Supported LCD Program Box: Not Supported WiFi Module: Not Supported Program Port: Separate Program Port Firmware Firmware Upgrade: Not Supported Size & Weight Size: 68.5x39.4x32mm I.D./O.D. of the Water Cooling Pipe: Ф3.0/5.4 mm Weight: 150g Applications Boat Length <110cm   Installation & Connection Connect the ESC, motor, receiver, battery and servo according to the wiring diagram below (Picture 1/2). Three wires from the ESC to the motor have no polarity, so you can connect them freely. Please recheck all the connections and ensure they are correctly connected before proceeding to step 2. (And you may find it’s necessary to swap two wires if the motor runs in reverse.) For safety, please always keep the propeller away from human body or any other objects. Red color input wire is positive pole, Black color input wire is negative pole. 1) Picture 1 is for Seaking-30A-V3, Seaking-60A-V3 and other ESCs that work with one LiPo battery pack; that is a wiring diagram with 1 battery pack. 2) Picture 2 is for Seaking-120A-V3, Seaking-180A-V3, Seaking-130A-HV-V3(without switch) and other ESCs that may work with two LiPo battery packs; that is the wiring diagram with 2 battery packs.

1.095,-

KJØP
This is the stock 42x59 Propeller for the Spartan Boat from Traxxas. FEATURES: Black nylon construction INCLUDES: One 42x59 propeller REQUIRES: Installation on propeller shaft SPECS:    Shaft Diameter: 4mm

59,-

KJØP
Body Pins(6)

49,-

KJØP
 Fr.Lower Susp.Arm-LF/RT

69,-

KJØP
DIFF. GEARBOX UNIT

329,-

349,-

KJØP
-6%
Charge Lead Tamiya with 4mm banana plugs

69,-

KJØP
  Traxxas 13-Piece Tool Kit with Carrying Case       The Perfect Companion The new Traxxas Tool Kit includes virtually every tool required to maintain Traxxas vehicles and stores them in a handy carrying case. A comfortable ratcheting handle allows the 11 included bits to telescope for those hard-to-reach screws. The kit includes nut drivers, hex drivers, standard and Phillips head screwdrivers and a wrench. Tool Kit Features: Comfortable ratcheting handle with clear directional markings Telescoping bits provide easy access to virtually any screw Five nut drivers: 4, 5, 5.5, 7 & 8mm Six hex drivers: 1.5, 2, 2.5, 3, 3.5 & 4mm Three Phillips head screwdrivers: Size 00, 0 & 1 Three flat-head screwdrivers: Size 2, 3 & 4 Open-ended wrench: 4 & 8mm Tough zippered carrying case

389,-

429,-

KJØP
-9%
SkyRC E680 er en computerlader som dekker de fleste ladebehov, den har en makseffekt på 80W og maks ladestyrke er 8.0A. Laderen har også innebygget balanserer og det følger med ladekontakt med XT60-plugg.  SkyRC E680 er en god multilader som kan lade LiPo, LiHV, LiFe, LiIon, NiHm, NiCd, AGM og Pb batterier. Laderen kan bruke både 12V og 220V kilde inn, så denne laderen vil kunne brukes både i felten på ett bilbatteri og på hobbyrommet plugget rett i veggen. Laderen har max ladestyrke på 80W/8A, så ett 2cell LiPo kan da lades på 8A, 3cell LiPo kan da lades på ca 7A. Ett 6cell LiPo på ca 3,6A. Det følger med 220V strømkabel, kabel med krokodilleklemmer for tilkobling til eksempelvis 12V bilbatteri, XT60-ladeledning og 2-6S XH-balanseringsbrett.(SK-600020-04) Spesifikasjoner: Vekt 390gram Innspenning DC 11-18V Innspenning AS 100-240V Display LCD Størrelse 135x110x60mm Backlight Ja Antall celler LiPo 1-6S Antall celler NiMh/NiCD 1-15 PB 2-20V Ladestyrke 0.1-8,0A Maks Ladeeffekt 80W Utladeeffekt max 10W Minne 10 modellminner Skal man lade batterier med andre typer strømkontakt, må tilbehør kjøpes. Skal man balansere LiPo med annen type balanseringskontakt, kjøp eksempelvis SkyRC Multi balanseringskontakt. Se under for tilbehør. Viktig info! Husk at ved lading av lipo batterier skal man for å oppnå full balansering av pakken kople til begge kontaktene fra batteriet og velge LiPo Balance programmet, ikke LiPo Charge.  SkyRC e680 Multi-Chemistry Charger/Discharger Specifications: AC Input: 100-240Volt AC DC Input: 11-18Volt DC Circuit Power: Max. Charge Power 80W Max. Discharge Power 10W Charge Current Range: 0.1-8A Discharge Current Range: 0.1-2A Current Drain For Balancing LiPo: 300mA/cell NiCd/NiMH Battery Cell Count: 1-15 cells LiPo/LiHV/LiFe/Lilon Cell Count: 1-6 cells Pb battery voltage: 2-20V Net Weight: 390 g Dimensions: 135 x 110 x 60 mm

699,-

749,-

KONTAKT
-7%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png