Hopp til innhold
Hjem / Merker / Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

 
Hovedbilde Traxxas 2271 Servo Case for 2270
Traxxas 2271 Servo Case for 2270
Art.nr: TRX 2271
Copied
Servo Case for 2270 Servo case/ gaskets (for 2270 waterproof servo) Replacement waterproof case for 2270 high-torque metal-gear servo. Includes gaskets. Does not fit other servos.

119,-

139,-

KJØP
-14%
Hovedbilde Traxxas 2272 Gear Set Metal for Servo 2270
Traxxas 2272 Gear Set Metal for Servo 2270
Art.nr: TRX 2272
Copied
Gear Set Metal for Servo 2270 Gear set (for 2270 waterproof servo) Replacement metal gear set for 2270 Servo. Does not fit other servos.

219,-

KJØP
Hovedbilde Traxxas 2276 Servo Case Plastic for 2275
Traxxas 2276 Servo Case Plastic for 2275
Art.nr: TRX 2276
Copied
Traxxas 2276 Servo Case Plastic for 2275 Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for 2275 servo)

59,-

KJØP
Hovedbilde Traxxas 2277 Gear Set Metal for Servo 2275
Traxxas 2277 Gear Set Metal for Servo 2275
Art.nr: TRX 2277
Copied
Traxxas 2277 Gear Set Metal for Servo 2275 Gear set, metal (for 2275 servo)

209,-

KJØP
Hovedbilde Traxxas 2278 Servo Case Middle Metal for 2275
Traxxas 2278 Servo Case Middle Metal for 2275
Art.nr: TRX 2278
Copied
Traxxas 2278Servo Case Middle Metal for 2275 Servo case, aluminum (black-anodized) (middle) (for 2275 servo)

209,-

KJØP
Hovedbilde Traxxas 2280 Servo 43kg 0,13s Brushless, Metal Gear, ...
Traxxas 2280 Servo 43kg 0,13s Brushless, Metal Gear, ...
Art.nr: TRX 2280
Copied
Traxxas 2280 - 1/10 Brushless Servo with Full Aluminum Case New Top-of-the-Line 1/10 Servo with Full Aluminum Case! 2280 Specs & Features: High Torque: 43kg/cm 87% more torque than stock Sledge servo 5X more torque for TRX-4 with 2262 external BEC High Speed: 0.13 sec/60° Twice as fast as stock Sledge Full Aluminum Heat Sink Case Full Steel Gears with steel output Brushless motor technology Waterproof Dual ball bearings Factory fit for drop-in installation into 1/10 scale Traxxas models* * Does not fit Traxxas 4-Tec, XO-1, Spartan, or Jato. Some models may require modification. For installation with TRX-4 models with XL-5HV ESC, use Traxxas external BEC (2262) and steel servo horn (8247X).

1.695,-

1.995,-

KJØP
-15%
Hovedbilde Traxxas 2287 Gear Set Metal for Servo 2280
Traxxas 2287 Gear Set Metal for Servo 2280
Art.nr: TRX 2287
Copied
Traxxas 2287 Gear Set Metal for Servo 2280 Gear set, metal (for 2280 servo) Replacement metal gear set for 2280 servo

309,-

329,-

KJØP
-6%
Hovedbilde Traxxas 2335 Turnbuckles 72mm (2)
Traxxas 2335 Turnbuckles 72mm (2)
Art.nr: TRX 2335
Copied
These are replacement 72mm turnbuckles for Traxxas products. Includes: 2- 72mm threaded rods. Comments: These are thresed on both ends, and have an adjusting nut made into  them.

35,-

KJØP
Hovedbilde Traxxas 2336 Turnbuckles 78mm (2)
Traxxas 2336 Turnbuckles 78mm (2)
Art.nr: TRX 2336
Copied
This is a Pair of 78mm Steel Turnbuckles from Traxxas.  These are links to connect camber, or toe-in on the T-Maxx.     FEATURES Steel construction  Adjustable without removing from vehicle   INCLUDES Two 78mm turnbuckles for the Traxxas T-Maxx   REQUIREMENTS Nothing. These are direct replacement parts.   SPECIFICATIONS  Length: 78mm (3.07")  Thread diameter: 3mm (0.11")

29,-

39,-

KJØP
-26%
Hovedbilde Traxxas 2336A Turnbuckle Toe Link Complete 96mm ...
Traxxas 2336A Turnbuckle Toe Link Complete 96mm ...
Art.nr: TRX 2336A
Copied
Turnbuckles, aluminum (blue-anodized), toe links, 61mm (2) (assembled w/ rod ends & hollow balls) (fits Stampede) (requires 5mm aluminum wrench #5477)   Traxxas’ aluminum turnbuckles make it easy to add strength and adjustability to your Traxxas model. These turnbuckles come in a fire-red or brilliant blue-anodized finish for stunning good looks. Traxxas aluminum toe links are lighter than the stock steel turnbuckles, and are 35% lighter than titanium. High-grade 7075-T6 aluminum ensures increased bending stiffness. The kit requires a 5mm aluminum wrench that prevents marring the finish (#5477). Comes assembled with rod ends & hollow balls.

139,-

KJØP
Hovedbilde Traxxas 2336X Turnbuckle Toe Link Complete 96mm ...
Traxxas 2336X Turnbuckle Toe Link Complete 96mm ...
Art.nr: TRX 2336X
Copied
Turnbuckles, aluminum (red-anodized), toe links, 61mm (2)(assembled with rod ends & hollow balls) (fits Stampede) (requires 5mm aluminum wrench #5477)   Traxxas’ aluminum turnbuckles make it easy to add strength and adjustability to your Traxxas model. These turnbuckles come in a fire-red or brilliant blue-anodized finish for stunning good looks. Traxxas aluminum toe links are lighter than the stock steel turnbuckles, and are 35% lighter than titanium. High-grade 7075-T6 aluminum ensures increased bending stiffness. The kit requires a 5mm aluminum wrench that prevents marring the finish (#5477). Comes assembled with rod ends & hollow balls.

139,-

KJØP
Hovedbilde Traxxas 2380 Differential Pro-Built Bandit, Rustler, ...
Traxxas 2380 Differential Pro-Built Bandit, Rustler, ...
Art.nr: TRX 2380
Copied
Traxxas 2380 - Pro-Built 2WD Differential Differential, complete (fits 1/10-scale 2WD Rustler®, Bandit, Stampede®, Slash) As you probably know, Traxxas makes high-quality replacement parts for every vehicle that we sell. This makes it easy to keep your model running in peak form. For even faster, more convenient repairs and maintenance, Traxxas now offers Pro-BUILT™ components for the best-selling 2WD and 4X4 models, including E-Revo, Bandit, Rustler, Stampede, Slash, and Unlimited Desert Racer. Pro-BUILT components allow you to replace your model’s differential or transmission as a complete unit, no assembly required. Each Pro-BUILT component arrives ready-to-install, precisely assembled to Traxxas’ exacting standards and lubricated with factory-certified grease or oil. Pro-BUILT components save time and make it easy to restore like-new performance with factory-fresh parts in the driveline, where precision counts most. Pro-BUILT components ensure your model delivers all the performance, durability, and fun you expect from Traxxas. Fits: Bandit VXL Bandit Bigfoot® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Ford F-150 Raptor Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Stampede® VXL Stampede®

169,-

KJØP
Hovedbilde Traxxas 2414 Wing Wire
Traxxas 2414 Wing Wire
Art.nr: TRX 2414
Copied
This is the Wing Wire from Traxxas. FEATURES Prebent steel wire fastens rear wings to chassis on Traxxas cars INCLUDES Wing Wire SPECIFICATIONS Length: 2.4" (62mm) Width: 2.0" (52mm) Wire Diameter: 0.079" (2mm)

29,-

39,-

KJØP
-26%
Hovedbilde Traxxas 2419 Pinion Gear 48P 19T w/Set Screw Steel
Traxxas 2419 Pinion Gear 48P 19T w/Set Screw Steel
Art.nr: TRX 2419
Copied
This is a Traxxas 19T 48P Pinion Gear. FEATURES: Metal construction           Grey in color INCLUDES: One 19T 48P Pinion Gear           One Set Screw REQUIRES: Installation  

39,-

Ikke på lager
Hovedbilde Traxxas 2421 21T 48P Pinion Gear
Traxxas 2421 21T 48P Pinion Gear
Art.nr: TRX 2421
Copied
This is the Traxxas 21T 48P Pinion Gear FEATURES: Made of steel INCLUDES: One pinion gear           One setscrew, M3.0x4.0mm SPECS:    Teeth: 21           Pitch: 48           Length: 10.5mm           Diameter: 12mm           Hole diameter: 3.4mm           Length of teeth: 6.1mm

39,-

KJØP
Hovedbilde Traxxas 2423 Pinion Gear 48P 23T w/Set Screw Steel
Traxxas 2423 Pinion Gear 48P 23T w/Set Screw Steel
Art.nr: TRX 2423
Copied
This is a 23 Tooth 48 Pitch Pinion Gear By Traxxas FEATURES: Pinion gear with set screw, Silver in color INCLUDES: (1) 23 Tooth 48 Pitch Pinion Gear           (1) One 4mmx2mm set screw REQUIRES: Installation SPECS:    Outer Diameter: 14mm (9/16")           Inner Diameter: 11mm (7/16")

39,-

49,-

KJØP
-20%
Hovedbilde Traxxas 2426 Pinion Gear 48P 26T w/Screw
Traxxas 2426 Pinion Gear 48P 26T w/Screw
Art.nr: TRX 2426
Copied
This is a 26 Tooth, 48 Pitch Pinion Gear with Set Screw                                from Traxxas. FEATURES: Steel construction, silver in color INCLUDES: One 26 Tooth, 48 Pitch Pinion Gear           One 3x4mm Set Screw (1.5mm hex size) REQUIRES: Installation SPECS:    Length: .42" (10.5mm)           Inside Diameter: 1/8"           Outside Diameter: .58" (14mm)  

39,-

KJØP
Hovedbilde Traxxas 2427 Gear, 14-T pinion (48-pitch)/ set screw
Traxxas 2427 Gear, 14-T pinion (48-pitch)/ set screw
Art.nr: TRX 2427
Copied
Gear, 14-T pinion (48-pitch)/ set screw

35,-

KJØP
Hovedbilde Traxxas 2428 12T 48P Pinion Gear/Set Screw
Traxxas 2428 12T 48P Pinion Gear/Set Screw
Art.nr: TRX 2428
Copied
 This is the 12T 48P Pinion Gear for the               Telluride Off-Road Vehicle from Traxxas FEATURES: Hardened steel construction   INCLUDES: 12T 48P Pinion Gear with Set Screw

39,-

KJØP
Hovedbilde Traxxas 2431 Pinion Gear 48P 31T w/Screw
Traxxas 2431 Pinion Gear 48P 31T w/Screw
Art.nr: TRX 2431
Copied
This is a 31 Tooth, 48 Pitch Pinion Gear with Set Screw                                from Traxxas. FEATURES: Steel construction, silver in color INCLUDES: One 31 Tooth, 48 Pitch Pinion Gear           One 3x4mm Set Screw (1.5mm hex size) REQUIRES: Installation SPECS:    Length: .42" (10.5mm)           Inside Diameter: 1/8"           Outside Diameter: .69" (17.5mm)

39,-

49,-

KJØP
-20%
Hovedbilde Traxxas 2433 Body Bandit Pink Painted
Traxxas 2433 Body Bandit Pink Painted
Art.nr: TRX 2433
Copied
Traxxas 2433 Body, Bandit, pink (painted, decals applied) Is it time to upgrade your Bandit with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. There’s no need to trim the body or drill mounting holes because Traxxas pre-painted bodies come ready to mount right out of the bag. Accessory part for these models: Bandit® VXL Bandit®

549,-

KJØP
Hovedbilde Traxxas 2435 Pinion Gear 35T 48P
Traxxas 2435 Pinion Gear 35T 48P
Art.nr: TRX 2435
Copied
Gear, 35-T pinion (48-pitch)/ set screw

35,-

KJØP
Hovedbilde Traxxas 2441 Camber Links Bandit
Traxxas 2441 Camber Links Bandit
Art.nr: TRX 2441
Copied
These are the Traxxas Camber Links                       for the Traxxas electric Bandit. FEATURES: Black plastic camber links Two 2.56" (65mm) Two 3" (76mm) INCLUDES: Four camber links REQUIRES: Traxxas bandit SPECS:    Thickness: 4mm COMMENTS: Camber links is another name for tie-rods.

39,-

KJØP
Hovedbilde Traxxas 2441A Camber Links
Traxxas 2441A Camber Links
Art.nr: TRX 2441A
Copied
Camber link set for Bandit (grey) (plastic/ non-adjustable)

39,-

KJØP
Hovedbilde Traxxas 2448 Body Bandit Rock´n´Roll Painted
Traxxas 2448 Body Bandit Rock´n´Roll Painted
Art.nr: TRX 2448
Copied
Traxxas 2448 Body, Bandit, Rock n' Roll (painted, decals applied) Is it time to upgrade your Bandit with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. There’s no need to trim the body or drill mounting holes because Traxxas pre-painted bodies come ready to mount right out of the bag. Accessory part for these models: Bandit®

549,-

599,-

KJØP
-8%
Viser 426 til 450 (av 5154 produkter)

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png