Hopp til innhold

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

 
Art.nr: TRX 2531A
Copied
Suspension arms, black, front, heavy duty (2) (requires #3632 series caster block and #3640 screw pin set)

129,-

KJØP
Art.nr: TRX 2531G
Copied
Suspension arms, green, front, heavy duty (2) (requires #3632 series caster block and #3640 screw pin set)

129,-

KJØP
Art.nr: TRX 2531L
Copied
Suspension arms, blue, front, heavy duty (2) (requires #3632 series caster block and #3640 screw pin set)

129,-

KJØP
Art.nr: TRX 2531R
Copied
Suspension arms, red, front, heavy duty (2) (requires #3632 series caster block and #3640 screw pin set)

129,-

KJØP
Art.nr: TRX 2531T
Copied
Suspension arms, orange, front, heavy duty (2) (requires #3632 series caster block and #3640 screw pin set)

129,-

KJØP
Art.nr: TRX 2531X
Copied
Denne erstatter TRX 2531   These are the Replacement Front Suspension Arms for many Traxxas kits.   These are located on the front bulkhead and are held on by suspension pins. FEATURES: Nylon construction           Black in color INCLUDES: Two black nylon suspension arms REQUIRES: Assembly onto kit. SPECS:    Length:  3"           Width: 1.2" COMMENTS: This will work on the Bandit, Nitro Stampede, Nitro Rustler, SRT,             and the Nitro Sport.

129,-

KJØP
Art.nr: TRX 2533
Copied
Screws, 4x30mm countersunk machine (hex drive) (6)

39,-

KJØP
Art.nr: TRX 2534
Copied
This is a 3x6mm Countersunk Machine Screw Set from Traxxas FEATURES: Steel construction INCLUDES: (6) 3x6mm screws

35,-

KJØP
Art.nr: TRX 2535
Copied
 These are the Countersunk 4mm x 10mm Screws              for the Traxxas Nitro Jato Stadium Truck. FEATURES: Metal construction           Black in color INCLUDES: Six 4mm x 10mm Countersunk Flathead Hex Screws REQUIRES: Assembly onto Vehicle

35,-

KJØP
Art.nr: TRX 2536
Copied
      These are Replacement Steering Blocks and Wheel Spindles       for the Traxxas Nitro Rustler, Nitro Stampede, and Nitro Sport. FEATURES: Black Plastic Steering Blocks           Aluminum Wheel Spindles INCLUDES: Two Steering Blocks           Two Wheel Spindles REQUIRES: Traxxas Nitro Stampede, Nitro Sport, or Nitro Rustler.

89,-

KJØP
Art.nr: TRX 2547
Copied
Traxxas 2547  Screws, 4x18mm countersunk machine (hex drive) (6)

29,-

39,-

KJØP
-26%
Art.nr: TRX 2550
Copied
         These are 3x8mm Countersunk Hex Head Screws by Traxxas.               Can be used anywhere this type of screw is needed. FEATURES: Metal Construction           Black in Color           Countersunk INCLUDES: (6) Screws SPECS:    Length:   8mm           Diameter: 3mm

35,-

KJØP
Art.nr: TRX 2551
Copied
This is a package of six 3x10mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x10mm countersunk screw is required INCLUDES: Six 3x10mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  10mm           Diameter: 3mm

35,-

KJØP
Art.nr: TRX 2553
Copied
This is a package of six 3x15mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x15mm countersunk screw is required INCLUDES: Six 3x15mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  15mm           Diameter: 3mm

35,-

KJØP
Art.nr: TRX 2554
Copied
These are 3x5mm Backplate screws for the Traxxas 2.5 Engine. FEATURES: Black steel construction. INCLUDES: Six black steel cap head screws. REQUIRES: Assembly on coverplate. SPECS:    Length: 5mm           Diameter: 3mm COMMENTS: These may also be referred to as coverplate screws.

35,-

KJØP
Art.nr: TRX 2555
Copied
These are the Rear Suspension Arms for the    Traxxas Electric SRT, Nitro Rustler, Nitro Sport and Nitro Stampede Kits. FEATURES: Durable Black plastic construction INCLUDES: One left suspension arm           One right suspension arm REQUIRES: TRX 1739 screw pins for installing SPECS:    Length: 3-5/8"                         

119,-

KJØP
Art.nr: TRX 2555A
Copied
Suspension arms, rear (blue) (2) (heavy duty, cold weather material) New Heavy-Duty Suspension Arms Get valuable add-on sales and allow your customers the option to customize their Traxxas 1/10 trucks with new heavy-duty suspension arms. Available in six dynamic colors, the suspension arms use our toughest composite material to stand up to the most punishing drivers and resist breakage even in cold weather. Designed for the Extreme Traxxas heavy-duty suspension arms feature an all-new design which takes advantage of a proprietary composite material that is designed specifically for high loads and hard landings. Whether you’re sending it at the skate park, or preparing for the next speed run, these arms were built for the extreme. Fits: Slash 2WD (rear) Slash VXL 2WD (rear) Ford F-150 Raptor (rear) Nitro Rustler (rear) Nitro Slash (rear)                         

149,-

159,-

KJØP
-6%
Art.nr: TRX 2555G
Copied
Suspension arms, rear (green) (2) (heavy duty, cold weather material) New Heavy-Duty Suspension Arms Get valuable add-on sales and allow your customers the option to customize their Traxxas 1/10 trucks with new heavy-duty suspension arms. Available in six dynamic colors, the suspension arms use our toughest composite material to stand up to the most punishing drivers and resist breakage even in cold weather. Designed for the Extreme Traxxas heavy-duty suspension arms feature an all-new design which takes advantage of a proprietary composite material that is designed specifically for high loads and hard landings. Whether you’re sending it at the skate park, or preparing for the next speed run, these arms were built for the extreme. Fits: Slash 2WD (rear) Slash VXL 2WD (rear) Ford F-150 Raptor (rear) Nitro Rustler (rear) Nitro Slash (rear)

149,-

159,-

KJØP
-6%
Art.nr: TRX 2555R
Copied
Suspension arms, rear (red) (2) (heavy duty, cold weather material) New Heavy-Duty Suspension Arms Get valuable add-on sales and allow your customers the option to customize their Traxxas 1/10 trucks with new heavy-duty suspension arms. Available in six dynamic colors, the suspension arms use our toughest composite material to stand up to the most punishing drivers and resist breakage even in cold weather. Designed for the Extreme Traxxas heavy-duty suspension arms feature an all-new design which takes advantage of a proprietary composite material that is designed specifically for high loads and hard landings. Whether you’re sending it at the skate park, or preparing for the next speed run, these arms were built for the extreme. Fits: Slash 2WD (rear) Slash VXL 2WD (rear) Ford F-150 Raptor (rear) Nitro Rustler (rear) Nitro Slash (rear)

149,-

159,-

KJØP
-6%
Art.nr: TRX 2555T
Copied
Suspension arms, rear (orange) (2) (heavy duty, cold weather material) New Heavy-Duty Suspension Arms Get valuable add-on sales and allow your customers the option to customize their Traxxas 1/10 trucks with new heavy-duty suspension arms. Available in six dynamic colors, the suspension arms use our toughest composite material to stand up to the most punishing drivers and resist breakage even in cold weather. Designed for the Extreme Traxxas heavy-duty suspension arms feature an all-new design which takes advantage of a proprietary composite material that is designed specifically for high loads and hard landings. Whether you’re sending it at the skate park, or preparing for the next speed run, these arms were built for the extreme. Fits: Slash 2WD (rear) Slash VXL 2WD (rear) Ford F-150 Raptor (rear) Nitro Rustler (rear) Nitro Slash (rear)

149,-

159,-

KJØP
-6%
Art.nr: TRX 2555X
Copied
Suspension arms, rear (black) (2) (heavy duty, cold weather material) New Heavy-Duty Suspension Arms Get valuable add-on sales and allow your customers the option to customize their Traxxas 1/10 trucks with new heavy-duty suspension arms. Available in six dynamic colors, the suspension arms use our toughest composite material to stand up to the most punishing drivers and resist breakage even in cold weather. Designed for the Extreme Traxxas heavy-duty suspension arms feature an all-new design which takes advantage of a proprietary composite material that is designed specifically for high loads and hard landings. Whether you’re sending it at the skate park, or preparing for the next speed run, these arms were built for the extreme. Fits: Slash 2WD (rear) Slash VXL 2WD (rear) Ford F-150 Raptor (rear) Nitro Rustler (rear) Nitro Slash (rear)                         

149,-

159,-

KJØP
-6%
Art.nr: TRX 2556
Copied
Header screws, 3x23mm cap hex screws (6)

39,-

KJØP
Art.nr: TRX 2557
Copied
These are the 3x30mm Cap Head Screws for use on the          Traxxas Slash 2WD Short Course Racing Truck RTR. FEATURES: Steel construction           Black in color INCLUDES: Six 3x30mm Cap Head Screws REQUIRES: Installation on the vehicle SPECS:    Length: 3mm           Diameter: 30mm

39,-

49,-

KJØP
-20%
Art.nr: TRX 2562
Copied
Screws, 2.6x8mm roundhead machine (6)

19,-

KJØP
Art.nr: TRX 2563
Copied
Screws, 3x15mm roundhead machine (6)

19,-

KJØP
Viser 476 til 500 (av 5154 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png