Hopp til innhold
Hjem / Reservedeler/Option-parts / Option Parts Biler / Traxxas El-Biler / Slash 2wd / Traxxas 2555G Suspension Arms Rear HD Green (2)
-6%

Traxxas 2555G Suspension Arms Rear HD Green (2)

Art.nr: TRX 2555G

149,-

159,-

- 6%
Traxxas

Traxxas
På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Suspension arms, rear (green) (2) (heavy duty, cold weather material)

New Heavy-Duty Suspension Arms
Get valuable add-on sales and allow your customers the option to customize their Traxxas 1/10 trucks with new heavy-duty suspension arms. Available in six dynamic colors, the suspension arms use our toughest composite material to stand up to the most punishing drivers and resist breakage even in cold weather.

Designed for the Extreme
Traxxas heavy-duty suspension arms feature an all-new design which takes advantage of a proprietary composite material that is designed specifically for high loads and hard landings. Whether you’re sending it at the skate park, or preparing for the next speed run, these arms were built for the extreme.

Fits:

  • Slash 2WD (rear)
  • Slash VXL 2WD (rear)
  • Ford F-150 Raptor (rear)
  • Nitro Rustler (rear)
  • Nitro Slash (rear)

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Hovedbilde Traxxas 2555R Suspension Arms Rear HD Red (2) Hovedbilde Traxxas 2555R Suspension Arms Rear HD Red (2)
Traxxas 2555R Suspension Arms Rear HD Red (2)
Art.nr: TRX 2555R
Copied
Suspension arms, rear (red) (2) (heavy duty, cold weather material) New Heavy-Duty Suspension Arms Get valuable add-on sales and allow your customers the option to customize their Traxxas 1/10 trucks with new heavy-duty suspension arms. Available in six dynamic colors, the suspension arms use our toughest composite material to stand up to the most punishing drivers and resist breakage even in cold weather. Designed for the Extreme Traxxas heavy-duty suspension arms feature an all-new design which takes advantage of a proprietary composite material that is designed specifically for high loads and hard landings. Whether you’re sending it at the skate park, or preparing for the next speed run, these arms were built for the extreme. Fits: Slash 2WD (rear) Slash VXL 2WD (rear) Ford F-150 Raptor (rear) Nitro Rustler (rear) Nitro Slash (rear)

149,-

159,-

KJØP
-6%
Hovedbilde Traxxas 2555X Suspension Arms Rear (2) Hovedbilde Traxxas 2555X Suspension Arms Rear (2)
Traxxas 2555X Suspension Arms Rear (2)
Art.nr: TRX 2555X
Copied
Suspension arms, rear (black) (2) (heavy duty, cold weather material) New Heavy-Duty Suspension Arms Get valuable add-on sales and allow your customers the option to customize their Traxxas 1/10 trucks with new heavy-duty suspension arms. Available in six dynamic colors, the suspension arms use our toughest composite material to stand up to the most punishing drivers and resist breakage even in cold weather. Designed for the Extreme Traxxas heavy-duty suspension arms feature an all-new design which takes advantage of a proprietary composite material that is designed specifically for high loads and hard landings. Whether you’re sending it at the skate park, or preparing for the next speed run, these arms were built for the extreme. Fits: Slash 2WD (rear) Slash VXL 2WD (rear) Ford F-150 Raptor (rear) Nitro Rustler (rear) Nitro Slash (rear)                         

149,-

159,-

KJØP
-6%
Hovedbilde Traxxas 2555A Suspension Arms Rear HD Blue (2) Hovedbilde Traxxas 2555A Suspension Arms Rear HD Blue (2)
Traxxas 2555A Suspension Arms Rear HD Blue (2)
Art.nr: TRX 2555A
Copied
Suspension arms, rear (blue) (2) (heavy duty, cold weather material) New Heavy-Duty Suspension Arms Get valuable add-on sales and allow your customers the option to customize their Traxxas 1/10 trucks with new heavy-duty suspension arms. Available in six dynamic colors, the suspension arms use our toughest composite material to stand up to the most punishing drivers and resist breakage even in cold weather. Designed for the Extreme Traxxas heavy-duty suspension arms feature an all-new design which takes advantage of a proprietary composite material that is designed specifically for high loads and hard landings. Whether you’re sending it at the skate park, or preparing for the next speed run, these arms were built for the extreme. Fits: Slash 2WD (rear) Slash VXL 2WD (rear) Ford F-150 Raptor (rear) Nitro Rustler (rear) Nitro Slash (rear)                         

149,-

159,-

KJØP
-6%
Hovedbilde Traxxas 2555T Suspension Arms Rear HD Orange (2) Hovedbilde Traxxas 2555T Suspension Arms Rear HD Orange (2)
Traxxas 2555T Suspension Arms Rear HD Orange (2)
Art.nr: TRX 2555T
Copied
Suspension arms, rear (orange) (2) (heavy duty, cold weather material) New Heavy-Duty Suspension Arms Get valuable add-on sales and allow your customers the option to customize their Traxxas 1/10 trucks with new heavy-duty suspension arms. Available in six dynamic colors, the suspension arms use our toughest composite material to stand up to the most punishing drivers and resist breakage even in cold weather. Designed for the Extreme Traxxas heavy-duty suspension arms feature an all-new design which takes advantage of a proprietary composite material that is designed specifically for high loads and hard landings. Whether you’re sending it at the skate park, or preparing for the next speed run, these arms were built for the extreme. Fits: Slash 2WD (rear) Slash VXL 2WD (rear) Ford F-150 Raptor (rear) Nitro Rustler (rear) Nitro Slash (rear)

149,-

159,-

KJØP
-6%
Hovedbilde Traxxas 2555 Suspension Arms Rear (2)
Traxxas 2555 Suspension Arms Rear (2)
Art.nr: TRX 2555
Copied
These are the Rear Suspension Arms for the    Traxxas Electric SRT, Nitro Rustler, Nitro Sport and Nitro Stampede Kits. FEATURES: Durable Black plastic construction INCLUDES: One left suspension arm           One right suspension arm REQUIRES: TRX 1739 screw pins for installing SPECS:    Length: 3-5/8"                         

119,-

KJØP

Kunder kjøpte også

Hovedbilde Traxxas 3695A Transmission Pro-Built Bandit, Rustler, ... Hovedbilde Traxxas 3695A Transmission Pro-Built Bandit, Rustler, ...
Traxxas 3695A Transmission Pro-Built Bandit, Rustler, ...
Traxxas 3695A - Pro-Built 2WD Transmission Transmission, complete (fits 1/10-scale 2WD Rustler®, Bandit, Stampede®, Slash) As you probably know, Traxxas makes high-quality replacement parts for every vehicle that we sell. This makes it easy to keep your model running in peak form. For even faster, more convenient repairs and maintenance, Traxxas now offers Pro-BUILT™ components for the best-selling 2WD and 4X4 models, including E-Revo, Bandit, Rustler, Stampede, Slash, and Unlimited Desert Racer. Pro-BUILT components allow you to replace your model’s differential or transmission as a complete unit, no assembly required. Each Pro-BUILT component arrives ready-to-install, precisely assembled to Traxxas’ exacting standards and lubricated with factory-certified grease or oil. Pro-BUILT components save time and make it easy to restore like-new performance with factory-fresh parts in the driveline, where precision counts most. Pro-BUILT components ensure your model delivers all the performance, durability, and fun you expect from Traxxas. Fits: Bandit VXL Bandit Bigfoot® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Ford F-150 Raptor Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Stampede® VXL Stampede®

899,-

999,-

KJØP
-10%
Hovedbilde Traxxas 9488 Hardware Kit Complete 2WD VXL w/ 272R
Traxxas 9488 Hardware Kit Complete 2WD VXL w/ 272R
Traxxas 9488 - Hardware Kit Replacement 2WD VXL Replacement hardware kit, steel. Compatible with Pro series or standard Magnum 272 transmissions. Replacement set for these 2WD models: Slash VXL Bandit VXL Stampede VXL Rustler VXL

399,-

429,-

KJØP
-7%
Hovedbilde RPM 81164 Wide Front Bumper for 2WD Bandit, Rustler & ... Hovedbilde RPM 81164 Wide Front Bumper for 2WD Bandit, Rustler & ...
RPM 81164 Wide Front Bumper for 2WD Bandit, Rustler & ...
RPM Wide Front Bumper for 2WD Bandit, Rustler & Stampede - Green Replaces stock Traxxas #2735 Quick Notes: Fits the Electric Stampede, Electric Rustler, Bandit, Nitro Sport, Nitro Stampede & Nitro Rustler Replaces stock Traxxas #2735 Give your favorite Traxxas vehicle added protection with the RPM wide front bumper. This bumper stands six inches wide and adds an extra 1-1/2” worth of bulletproof, RPM protection to the front end of the vehicle. RPM designed this bumper with the backyard basher in mind by making it with our guaranteed unbreakable blend of nylons and is molded in black, blue, green and red. This bumper will help reduce front-end damage during head on collisions with curbs, trees, etc!

99,-

KJØP
Hovedbilde Traxxas 3743G Steering Bellcranks Alu Green
Traxxas 3743G Steering Bellcranks Alu Green
Steering bellcranks, drag link (green-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)

379,-

399,-

KJØP
-5%
Hovedbilde RPM 80511 Rod Ends Long White 1/10 Traxxas Nitro Slash
RPM 80511 Rod Ends Long White 1/10 Traxxas Nitro Slash
These are the optional RPM 1/10 scale Long Rod Ends in White for Traxxas Vehicles. FEATURES Constructed of plastic, white in color (may be dyed to desired color) Connects linkage rods to suspension components INCLUDES Twelve Long Rod Ends in Blue REQUIREMENTS Installing pivot balls (not included) and threading linkage into rod ends COMMENTS Replaces Traxxas part #5525

119,-

KJØP
Hovedbilde RPM 80244 Front A-Arms Green Slash/Rustler/Elec ... Hovedbilde RPM 80244 Front A-Arms Green Slash/Rustler/Elec ...
RPM 80244 Front A-Arms Green Slash/Rustler/Elec ...
RPM Front Arms for the 2WD: Slash, Nitro Slash, Rustler & Stampede - Green Replaces stock Traxxas #3631 Quick Notes: Fits all versions of the Traxxas 2WD: Slash, Nitro Slash, Stampede & Rustler Nearly 25% lighter than stock Replaces stock Traxxas #3631 RPM front A-arms for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd are built to withstand some of the toughest abuse. Incredibly, we were able to shave some unwanted unsprung weight as well. RPM Front A-arms are nearly 25% lighter than stock versions of the same A-arms, yet the RPM versions are backed with our world-renowned breakage warranty. Additionally, we’ve increased clearance areas in the outer portion of the A-arms to allow increased droop travel when used in conjunction with RPM oversized bearing carriers (RPM #80372 & #80382). RPM front A-arms for the Electric versions of the Traxxas Slash, Rustler & Stampede are sold in pairs and are available in black, green, blue and red. These A-arms are molded with what is fast becoming an RPM trademark design of angled leading and trailing edges to reduce frontal edge mass and improve the a-arm’s ability to ride up and over tall obstacles instead of slamming into them. RPM A-arms are extremely rigid for a superior ride and stability over the roughest tracks and terrain.

149,-

KJØP
Hovedbilde Traxxas 3632G Caster Blocks Left & Right Green Hovedbilde Traxxas 3632G Caster Blocks Left & Right Green
Traxxas 3632G Caster Blocks Left & Right Green
NB! Ved montering vil man trenge TRX 3640 Caster blocks, 30-degree, green-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2) ALUMINUM CASTER BLOCKS: Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model. In addition to the strength and precision of the machined billet 6061-T6 aluminum, the red, blue or green anodized caster blocks feature a high-contrast laser etched TRX logo. Simple bolt-on installation that anyone can perform inspires confidence

279,-

299,-

KJØP
-7%
Hovedbilde Traxxas 4728 Pinion Gear 48P 28T
Traxxas 4728 Pinion Gear 48P 28T
Passer på Traxxas 1/16 biler også.  This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas 4-Tec. FEATURES: Ideal replacement part for fine tuning your Traxxas 4-Tec 4WD remote             control sedan.           Metal construction INCLUDES: One Pinion Gear           One Set Screw SPECS:    Teeth: 28           Pitch: 48

39,-

Ikke på lager
Hovedbilde Traxxas 5114 Ball Bearings 5x8x2.5mm Revo (2) Hovedbilde Traxxas 5114 Ball Bearings 5x8x2.5mm Revo (2)
Traxxas 5114 Ball Bearings 5x8x2.5mm Revo (2)
Disse lagerene er samme størrelse som Tamiya 850 This is a 2 pack of Traxxas 5X8mm Ball Bearings. FEATURES: Metal bearing construction           Blue rubber dirt shields INCLUDES: (2) 5X8mm ball bearings    Part #5114 SPECS:    Inside diameter:      3/16"    (5mm)           Outside diameter:     5/16"    (8mm)           Width:                3/32"  (2.5mm)

49,-

KJØP
Hovedbilde Traxxas 5924-GRN Body Slash 2WD/4WD Green (for ...
Traxxas 5924-GRN Body Slash 2WD/4WD Green (for ...
Traxxas 5924-GRN Body Slash 2WD/4WD Green (for Clipless Mounting) Body, Slash 2WD (also fits Slash® VXL & Slash 4X4), Green (painted, decals applied) (assembled with front & rear latches for clipless mounting) Is it time to upgrade your Slash with an all-new look? This clipless polycarbonate body features the hottest ProGraphix paint with pre-applied decals. There’s no need to trim the body because Traxxas pre-painted bodies come ready to mount right out of the bag. Body comes assembled with front and rear clipless latches. Older Slash chassis without clipless mounts will require 6940 (2WD) or 6976 and 10125 (4X4) in order to mount the body. Accessory part for these models: Slash 4X4 Ultimate Slash 4X4 VXL

849,-

949,-

KJØP
-11%
Hovedbilde Traxxas 5873 Tires/Wheels Assembled Rear Slash (2)
Traxxas 5873 Tires/Wheels Assembled Rear Slash (2)
These are a set of 2.2" Mounted Satin Chrome Wheels and Tires                       for the Traxxas Slash 2WD. FEATURES: Rear tires           2.2" Satin Chrome Wheels           Off-Road Racing Tires           5 spoke design INCLUDES: Two 2.2" mounted Off-Road Racing Tires, Satin Chrome Wheels           Foam Inserts REQUIRES: Installation on vehicle SPECS:    Outside diameter: 111mm (4.37")           Width: 45mm (1.77")           Inside diameter: 53.4mm (2.10")           Hex Size: 12mm

299,-

329,-

KJØP
-9%
Hovedbilde Traxxas 6929 Clipless Body Conversion Kit Slash 2WD Hovedbilde Traxxas 6929 Clipless Body Conversion Kit Slash 2WD
Traxxas 6929 Clipless Body Conversion Kit Slash 2WD
Traxxas 6929 - Clipless Body Conversion Kit Slash 2WD  Body conversion kit, Slash 2WD (includes front & rear body mounts, latches, hardware) (for clipless mounting) The Slash® 2WD clipless body conversion kit allows you to convert your 1/10 scale 2WD Slash chassis and body to the convenience and style of clipless body mounting. Wide latch mounts cover the existing body mount holes to provide a secure mounting point that helps prevent pull-through damage. The kit includes all mounting hardware and adhesive templates. Accessory part for these models: Slash VXL Slash 2WD Unassembled Kit Slash

369,-

KJØP
Hovedbilde Traxxas 5894 LED Lights Front and Rear Kit Complete ... Hovedbilde Traxxas 5894 LED Lights Front and Rear Kit Complete ...
Traxxas 5894 LED Lights Front and Rear Kit Complete ...
Traxxas 5894 LED Lights Front and Rear Kit Complete Slash 2WD LED light set, complete (includes front and rear bumpers with LED light bar, rear LED harness, & BEC Y-harness) (fits 2WD Slash®) Traxxas LED light kits are built tough, with factory fit and finish for easy installation. Designed specifically for the Slash 2WD, the kit includes 4 brilliant white forward-facing LEDs and two rear-facing red LEDs to enhance rear visibility. The kit is fully waterproof, and includes everything needed for installation.

549,-

649,-

KJØP
-15%
Hovedbilde Traxxas 3631G Suspension Arms Front HD Green (2)
Traxxas 3631G Suspension Arms Front HD Green (2)
Suspension arms, front (green) (2) (heavy duty, cold weather material) New Heavy-Duty Suspension Arms Get valuable add-on sales and allow your customers the option to customize their Traxxas trucks with new heavy-duty suspension arms. Available in six dynamic colors, the suspension arms use our toughest composite material to stand up to the most punishing drivers and resist breakage even in cold weather. Designed for the Extreme Traxxas heavy-duty suspension arms feature an all-new design which takes advantage of a proprietary composite material that is designed specifically for high loads and hard landings. Whether you’re sending it at the skate park, or preparing for the next speed run, these arms were built for the extreme. Accessory part for these models (front): Rustler Rustler VXL Stampede Stampede VXL Bigfoot Slash Slash VXL Ford F-150 Raptor

119,-

KJØP
Hovedbilde Traxxas 6852A Driveshaft assembly, rear, extreme heavy ...
Traxxas 6852A Driveshaft assembly, rear, extreme heavy ...
Driveshaft assembly, rear, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

149,-

169,-

KJØP
-12%
Hovedbilde Traxxas 3636G Steering Blocks Green Alu (2)
Traxxas 3636G Steering Blocks Green Alu (2)
Traxxas aluminum steering blocks improve appearance, ruggedness, and control. In addition to the strength and precision of the machined billet 6061-T6 aluminum steering blocks, larger 5x11mm ball bearings are included for smooth performance, reduced friction, and long life. Rubber seals on the bearings make them virtually maintenance free. Easy, bolt-on good looks in red, blue or green anodizing.

399,-

429,-

KJØP
-7%
Hovedbilde Traxxas 3652G Stub Axle Carriers Green
Traxxas 3652G Stub Axle Carriers Green
This is the optional Aluminum Rear Stub Axle Housing for the  Traxxas Rustler, Stampede, and Bandit.     FEATURES 6061-T6 aluminum construction, anodized green in color   INCLUDES Two Aluminum Rear Stub Axles  Four 5x11mm Bearings

379,-

429,-

KJØP
-12%
Hovedbilde Traxxas 1747G 4mm Flanged Nuts Green (4)
Traxxas 1747G 4mm Flanged Nuts Green (4)
 This is a package of four 4mm Flanged Locknuts in Green from Traxxas. FEATURES: May be used in any application requiring this size locknut           Serrated rear section ensures sure grip INCLUDES: Four 4mm Flanged Locknuts REQUIRES: 7mm Nut Driver SPECS:    Hex Size: 7mm           Hole Diameter: 4mm

99,-

109,-

KJØP
-9%
Hovedbilde Traxxas 2530 Bulkhead Front Black
Traxxas 2530 Bulkhead Front Black
This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.          The front suspension arm hinge pins pass through this piece. FEATURES: Black nylon construction INCLUDES: One front bulkhead REQUIRES: Nothing.  This is a direct replacement part. SPECS:    Length: 73.6mm (2.90")           Width: 41mm (1.62")           Height: 29mm (1.14") COMMENTS: This part is used on the following vehicles:             Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,             Rustler XL and Stampede XL.

79,-

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png