Hopp til innhold
Hjem / Reservedeler/Option-parts / Option Parts Biler / Traxxas El-Biler / Summit 1/10 / Traxxas 2280 Servo 43kg 0,13s Brushless, Metal Gear, Water Resis
-15%

Traxxas 2280 Servo 43kg 0,13s Brushless, Metal Gear, Water Resis

Art.nr: TRX 2280

1.695,-

1.995,-

- 15%
Traxxas

Traxxas
På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Traxxas 2280 - 1/10 Brushless Servo with Full Aluminum Case

New Top-of-the-Line 1/10 Servo with Full Aluminum Case!

2280 Specs & Features:

  • High Torque: 43kg/cm
  • 87% more torque than stock Sledge servo
  • 5X more torque for TRX-4 with 2262 external BEC
  • High Speed: 0.13 sec/60°
  • Twice as fast as stock Sledge
  • Full Aluminum Heat Sink Case
  • Full Steel Gears with steel output
  • Brushless motor technology
  • Waterproof
  • Dual ball bearings
  • Factory fit for drop-in installation into 1/10 scale Traxxas models*

* Does not fit Traxxas 4-Tec, XO-1, Spartan, or Jato. Some models may require modification. For installation with TRX-4 models with XL-5HV ESC, use Traxxas external BEC (2262) and steel servo horn (8247X).

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Hovedbilde Traxxas 2056 Servo High Torque Waterproof Hovedbilde Traxxas 2056 Servo High Torque Waterproof
Traxxas 2056 Servo High Torque Waterproof
Art.nr: TRX 2056
Copied
This is the replacement High Torque Waterproof Servo                      for many Traxxas cars. FEATURES: Plastic waterproof blue case INCLUDES: One high torque waterproof servo with J style connector REQUIRES: Mounting in the car. SPECS:    Length: 2.16" (55mm)           Width: .78"  (20mm)           Height: 1.69" (43mm)           Weight:  1.58oz (45g)  

399,-

419,-

KJØP
-5%
Hovedbilde Traxxas 2075X Servo Digital Metal Gear with BB and ... Hovedbilde Traxxas 2075X Servo Digital Metal Gear with BB and ...
Traxxas 2075X Servo Digital Metal Gear with BB and ...
Art.nr: TRX 2075X
Copied
Servo, digital high-torque, metal gear (ball bearing), waterproof     Length: 41 mm Height: 42 mm Width: 20 mm Max Voltage: 6,0 V Features: Water Proof, Digital, Metal Gears

699,-

749,-

KJØP
-7%
Hovedbilde Traxxas 2255 Servo High-Torque 400 29kg Metal gear, ...
Traxxas 2255 Servo High-Torque 400 29kg Metal gear, ...
Art.nr: TRX 2255
Copied
High-Torque 400 Red Brushless Digital Servo The Traxxas High-Torque 400 Red servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A cutting edge brushless motor provides 400 ounce-inches of torque for extreme applications.* The High-Torque 400 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit. The Power to Perform With over 3 times more torque than the standard #2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single #2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo.   High-voltage BEC boosts receiver power for even the most demanding servos. BEC fits inside the extended receiver box for fully waterproof protection. Kit includes BEC, receiver box lid, Y-harness, and mounting hardware.   For TRX-4 Installation The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit #2262 and a steel servo horn #8247X is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits.   Waterproof Not "Water Resistant" Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines.   HIGH-TORQUE 400 RED FEATURES   Factory fit for drop-in installation into Traxxas Models Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management™ (TSM) 400 oz-in torque at 6.0V 0.15 sec/60° at 6.0V Metal gears Dual ball bearings Brushless motor technology Aluminum center case     SPECIFICATIONS Motor Type:   Brushless Operating Voltage:   6.0 - 7.4V DC Speed:   0.15 sec/60° at 6.0V Torque:   400 oz-in at 6.0V Weight:   64g Gears:   Metal Output Spline:   25T Case:   Plastic top/bottom, anodized aluminum center Controller:   Digital   APPLICATION GUIDE   Compatible with most Traxxas 1/10 scale electric models* Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn Compatible with Traxxas nitro models using rechargeable 5-cell battery packs Not recommended for X-Maxx       *Does not fit 4-Tec 2.0 models. Minor trimming may be required on 2WD Stampede vehicles.

1.095,-

1.195,-

KJØP
-8%
Hovedbilde Traxxas 2270 Servo 17Kg Digital BB Metal Gear Sealed Hovedbilde Traxxas 2270 Servo 17Kg Digital BB Metal Gear Sealed
Traxxas 2270 Servo 17Kg Digital BB Metal Gear Sealed
Art.nr: TRX 2270
Copied
Traxxas 2270 High-Torque Digital Metal Gear Servo The waterproof, high-torque 2270 servo is the perfect upgrade for 1/10 scale vehicles. With 17kg/cm of torque on tap and full metal gears, the 2270 servo provides a significant performance boost over the standard 2075 servo lineup. SPECIFICATIONS: Torque: 236 oz-in @ 6.0V Speed: 0.175 sec/60° @ 6.0V Waterproofing: Sealed case with O-ring Gears: Metal Case: Plastic with full ball bearings Dimensions: 55 mm H x 44.5 mm L x 20 mm W Length: 55 mm Height: 44,5 mm Width: 20,0 mm Speed at 6,0V: 0,175 sec/60° Torque at 6,0V: 17 kg/cm Features: Digital , Metal Gears

749,-

799,-

KJØP
-6%
Hovedbilde Traxxas Servo 2070 Digital BB
Traxxas Servo 2070 Digital BB
Art.nr: TRX 2070
Copied
Traxxas 2070 - Digital Ball Bearing Servo   Ball Bearing Digital High-torque Power: 9kg/cm Transit Time: 0.17 sec/60° Size: L=55mm, H= 42.75mm, W=21.5mm

429,-

469,-

KJØP
-9%
Hovedbilde Traxxas 2075R Servo, digital high-speed, metal gear ...
Traxxas 2075R Servo, digital high-speed, metal gear ...
Art.nr: TRX 2075R
Copied
Servo, digital high-speed, metal gear (ball bearing), waterproof

699,-

749,-

KJØP
-7%
Hovedbilde Traxxas 2250 Servo High-Torque 330 24kg Metal gear ... Hovedbilde Traxxas 2250 Servo High-Torque 330 24kg Metal gear ...
Traxxas 2250 Servo High-Torque 330 24kg Metal gear ...
Art.nr: TRX 2250
Copied
High-Torque 330 Blue Servo The Traxxas High-Torque 330 Blue servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A powerful coreless motor provides 330 ounce-inches of torque for the most demanding applications.* The High-Torque 330 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit. The Power to Perform With over 3 times more torque than the standard TRX 2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single TRX 2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo.     For TRX-4 Installation The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit TRX 2262 and a steel servo horn TRX 8247X is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits.   Waterproof Not "Water Resistant" Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines.           HIGH-TORQUE 400 RED FEATURES Factory fit for drop-in installation into Traxxas Models Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management™ (TSM) 400 oz-in torque Metal gears Dual ball bearings Brushless motor technology Aluminum center case       SPECIFICATIONS Motor Type:   Brushless Operating Voltage:   6.0 - 7.4V DC Speed:   0.15 sec/60° Weight:   64g Gears:   Metal Output Spline:   25T Case:   Plastic top/bottom, anodized aluminum center Controller:   Digital   APPLICATION GUIDE   Compatible with most Traxxas 1/10 scale electric models* Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn Compatible with Traxxas nitro models using rechargeable 5-cell battery packs Not recommended for X-Maxx     High-Torque Blue 330 Waterproof Metal-Gear Coreless Digital Servo For the ultimate experience in precision steering authority, two new high-torque metal gear waterproof servos are available from Traxxas. Traxxas high-torque servos are designed for a factory fit in 1/10 Traxxas vehicles and both servos feature full metal gears, dual ball bearings, and waterproof cases with aluminum center sections for added heat dissipation. Both servos are designed to work flawlessly with Traxxas Stability Management for laying down maximum power on any surface. The High-Torque Blue 330 is powered by a coreless motor for 24 kg/cm of torque and 0.19 transit time. For optimum control and responsiveness, the High-Torque Red 400 uses brushless motor technology for a massive 29 kg/cm of torque and 0.15 transit time.   Factory fit for drop-in installation into Traxxas models Waterproof 24 kg-cm of torque and 0.19 transit time Metal gears Dual ball bearings Coreless motor technology Aluminum center case SPECIFICATIONS: Motor Type: Coreless Operating Voltage: 6.0-7.4V Torque: 24 kg/cm @ 6.0V Speed: 0.19 sec/60° @ 6.0V Weight: 64g Gears: Metal Output Spline: 25T Case: Plastic top/bottom, anodized aluminum center Controller: Digital

895,-

995,-

KJØP
-10%
Hovedbilde Traxxas 2055 High Torque Servo
Traxxas 2055 High Torque Servo
Art.nr: TRX 2055
Copied
  This is the Replacment High Torque Servo for the Traxxas T-Maxx and E-Maxx         or any other vehicle that you would like to mount this in.   This part goes between the receiver and hooks to the steering or motor or                engine to provide the power to either of these. FEATURES: Yields Increased Power and Speed. INCLUDES: One High Torque Servo with J style connector. REQUIRES: Mounting into vehicle. SPECS:    Length:  1.6" (40.5mm)           Width:   .8"  (20.5mm)           Height:  1.43" (36mm)           Torq:    80 oz/in           Weight:  1.58oz (45g)

389,-

419,-

KJØP
-7%
Hovedbilde Traxxas 2075 Servo Digital BB Sealed
Traxxas 2075 Servo Digital BB Sealed
Art.nr: TRX 2075
Copied
Traxxas 2075 - Waterproof Digital Servo The 2075 digital ball bearing servo provides precise control, quick responses, and outstanding torque with a waterproof case for worry-free driving in water, mud, and snow. Features 125 oz-in torque and a transit time of 0.16 sec /60°. SPECS:    Ball Bearing Digital High-torque Power: 125 oz-in (9kg/cm) Transit Time: 0.17 sec/60° Size: L=55mm, H= 42.75mm, W=21.5mm

549,-

589,-

KJØP
-7%
Hovedbilde Traxxas Servo 2275 25Kg Digital BB Metal Gear Sealed Hovedbilde Traxxas Servo 2275 25Kg Digital BB Metal Gear Sealed
Traxxas Servo 2275 25Kg Digital BB Metal Gear Sealed
Art.nr: TRX 2275
Copied
Traxxas 2275 - Servo 25Kg Digital BB Metal Gear Sealed Specs: Motor Type: Brushed Operating Voltage: 6-7.4V DC Torque: 25 kg/cm (6V) - 35kg (7.4V) Speed: 0.25 sec/60° (6V) - 0.16 sec/60° (7.4V) Weight: 67g Gears: Metal Output Spline: 25T Case: Plastic top/bottom, anodized aluminum center Controller: Digital Weight: 67 g Max Voltage: 7,4 V Speed at 6,0V: 0,25 sec/60° Speed at 7,2/7,4V: 0,16 sec/60° Torque at 6,0V: 25 kg/cm Torque at 7,2/7,4V: 35 kg/cm Features: Digital , Dual Ball Bearing , HV , Metal Gears

899,-

949,-

KJØP
-5%
Hovedbilde Traxxas 2287 Gear Set Metal for Servo 2280
Traxxas 2287 Gear Set Metal for Servo 2280
Art.nr: TRX 2287
Copied
Traxxas 2287 Gear Set Metal for Servo 2280 Gear set, metal (for 2280 servo) Replacement metal gear set for 2280 servo

309,-

329,-

KJØP
-6%

Kunder kjøpte også

Hovedbilde Traxxas 8035R LED Light Kit Pro Scale Complete Ford ... Hovedbilde Traxxas 8035R LED Light Kit Pro Scale Complete Ford ...
Traxxas 8035R LED Light Kit Pro Scale Complete Ford ...
Traxxas 8035R - TRX-4 1979 Ford Bronco & F-150 Pro Scale LED Light Set All the lighting control of a full-scale truck is at your fingertips with the Pro Scale® LED Light Set for your TRX-4® 1979 Ford® Bronco or F-150® High Trail Edition™. Turn the headlights on and off and select high or low beams. Signal for turns with automatic cancellation or put on the hazard lights. The brake lights glow when you slow or stop. Hit reverse, and backup lights glow automatically. For maximum power and convenience, add Traxxas Link and the optional Wireless Module (Part 6511, sold separately) to configure your lights right from your iOS or Android device. The Pro Scale system makes it easy. Pro Scale Headlights Features Headlights with high/low beam settings Brake lights Reverse lights Turn signals with auto-cancellation Hazard lights Set Includes: Complete LED light Set Pro Scale Lighting Power Module and mount Pro Scale Lighting Distribution Block and mount Motor sensors wire harness Front and rear light harness MAXX Link cable Receiver communication cable Installation hardware Fits these models: TRX-4® 1979 Chevrolet® Blazer® TRX-4® 1979 Ford® Bronco® TRX-4® Chevrolet® K10 High Trail Edition™ TRX-4® Equipped with Traxx® TRX-4® Ford® F-150® High Trail Edition™ TRX-4® Sport Unassembled Kit TRX-4® Sport

1.349,-

KJØP
Hovedbilde Proline 354717 Pre-Cut 1967 Ford F-100 Race Truck ... Hovedbilde Proline 354717 Pre-Cut 1967 Ford F-100 Race Truck ...
Proline 354717 Pre-Cut 1967 Ford F-100 Race Truck ...
Pre-Cut 1967 Ford F-100 Race Truck Clear Body for Unlimited Desert Racer This is a 1967 Ford® F-100 Race Truck Clear Body for the Unlimited Desert Racer®. The 1967 Ford® F-100 is a classic vintage truck that has recently become a popular platform for building full-size pre-runners. Pro-Line is proud to bring the nostalgic and majestic body lines of the 1967 Ford® F-100 to your Traxxas® UDR® for the ultimate in scale realism! This body features the iconic flat front grill and wide fender flares to represent the aggressive fiberglass bulges found on custom race trucks. The F-100 body comes clear so you can custom paint your truck to match anything your heart desires and is made from high quality, crystal clear polycarbonate material. Pro-Line's 1967 F-100 body mounts directly to the cage on the UDR® in the same locations as the stock body and is fully pre-cut for an easy direct fit. Transform the look of your Unlimited Desert Racer® and even more scale realism with the fully licensed 1967 Ford® F-100 Race Truck Body from Pro-Line! Features: Licensed 1967 Ford® F-100 Scale Looks Race Truck Style Wide Fender Flares Perfect fit for your Unlimited Desert Racer® Fully Pre-cut to Save you Time Detailed Graphics Included Made with Crystal Clear Polycarbonate Four steps to Race Ready: 1.) Clean Body completely 2.) Paint then peel the over-spray film off 3.) Sticker your body (decal sheet included) 4.) Mount your new body onto your truck Included: Pre-Cut 1967 Ford® F-100 Race Truck Clear Body (1 pc) Detailed Decal Sheets Fits: Unlimited Desert Racer® Specs: Length:   26.3" (668mm) Width at doors:   11.5" (292mm) Width at fenders:   13.3" (338mm) Height:   7.6" (193mm) Wheelbase:   16.5" (419mm)

1.095,-

1.195,-

KJØP
-8%
Hovedbilde Traxxas 8555 Driveshaft Center Rear (Fully Assembled)
Traxxas 8555 Driveshaft Center Rear (Fully Assembled)
Driveshaft, center rear, 6061-T6 aluminum (black-anodized) (fully assembled)/ 3mm screw pin (2)

269,-

299,-

KJØP
-10%
Hovedbilde Bronto Ladekabel - XT60 til XT60
Bronto Ladekabel - XT60 til XT60
  Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med XT60 til XT60-plugger. Benyttes for lading av batterier med XT60, og kobles rett i ladere med XT60 tilkobling. Praktisk om man vil ha batteriet i ladebag eller få litt avstand til laderen. Kan også benyttes som kabelforlenger i modellen. Spesifikasjoner   Ledning 14AWG Lengde 30cm Tilkobling 1 XT60 Tilkobling 2 XT60

89,-

KJØP
Hovedbilde Vapex LIPOBAGA Charging Bag-A Li-Po 175x225mm Hovedbilde Vapex LIPOBAGA Charging Bag-A Li-Po 175x225mm
Vapex LIPOBAGA Charging Bag-A Li-Po 175x225mm
Charging Bag-A Li-Po 175x225mm VAPEX LiPo-Safe Bag-A 175x225mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended!   Features: Fits many different medium sized batteries for most 1/10 cars, boats & airplanes Fits inside the storage Bag-E Envelope Style Velcro Flap Size: 175x225mm Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

79,-

KJØP
Hovedbilde Traxxas 2262 BEC HV for TRX-4
Traxxas 2262 BEC HV for TRX-4
High Voltage BEC kit for all TRX-4 chassis Traxxas new High-Torque servos represent a huge power upgrade for the TRX-4. When installing a high-torque servo from Traxxas, it is required that you use the High-Voltage BEC kit (#2262) and a steel servo horn (#8247X) is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits. Note: When used with Traxxas 2250 servo the maximum voltage is 2S LiPo When used with Traxxas 2255 servo the maximum voltage is 3S LiPo

429,-

459,-

KJØP
-7%
Hovedbilde Traxxas 8247X Servo Horn Steering Metal TRX-4
Traxxas 8247X Servo Horn Steering Metal TRX-4
Servo horn, steering, metal/ 3x14 BCS (1) Spline: 25T

79,-

KJØP
Hovedbilde Traxxas 8215 Body Mounts and Posts Front and Rear ...
Traxxas 8215 Body Mounts and Posts Front and Rear ...
Body mounts & posts, front & rear (complete set)

99,-

KJØP
Hovedbilde Traxxas 3070R Connector Traxxas iD 4S Male (2) (for ...
Traxxas 3070R Connector Traxxas iD 4S Male (2) (for ...
Traxxas® connector, 4s (male) (2) - FOR ESC USE ONLY FOR ESC USE ONLY The Traxxas 4s connector adds single 4s LiPo compatibility to the VXL-6s speed control. Requires 8527 jumper plug for unused battery lead. (Factory replacement plugs for 3465 and 3496 ESCs)

69,-

KJØP
Hovedbilde Traxxas 5480X Wheel Wrench Splined 17mm
Traxxas 5480X Wheel Wrench Splined 17mm
NB! Denne erstatter TRX 5480 This is the 17mm Splined Wheel Wrench from Traxxas. FEATURES Nylon construction, black in color  Compatible with the 17mm splined nuts used on many Traxxas vehicles INCLUDES 17mm splined wheel wrench

39,-

KJØP
Hovedbilde Ezrun Max 6 Hobbywing ESC Hovedbilde Ezrun Max 6 Hobbywing ESC
Ezrun Max 6 Hobbywing ESC
High Reliability & Durability Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EZRUN MAX6 is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error. Great Flexibility & Versatility With incredible acceleration capabilities and a rock-solid, stable output, the MAX6 can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adjusting the ESC parameters as per his preference and ability. Applicable to All Weather Conditions The waterproof and dust-proof design allows the MAX6 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.   High Voltage Built-in BEC The MAX6 has adopted the world’s first HV built-in BEC with an output current of up to 25Amp and a switchable output voltage of 6V-7.4V. The high voltage BEC is designed to handle today’s high voltage servos on demand used by large scale vehicles.   Advanced and Secure Electronic Switch The MAX6 features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.   Regular Firmware Updates Free of Charge You can upgrade the MAX6 with the Hobbywing USB LINK software, a multifunction LCD program box and a laptop. Hobbywing updates its ESC firmware regularly giving you upgraded features more often when available.   Maintenance Free The ESC minus the cooling fan is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle high jumps and landings on hard surfaces.   Built-in Anti-Spark System The MAX6 is built with internal anti-spark circuitry that protects not only battery connectors from damage but helps to prevent physical injury due to burnt fingers from the inevitable issue of sparking when hooking up the ESC to higher voltage battery packs (5S/6S/7S/8S).   Wide Range of Applications MAX6 Applications: This ESC is applicable to various 1/6th & 1/7th scale vehicles like the Traxxas XO-1, and also suitable to various 1/8th scale heavy vehicles like the CEN GST-E. It's the ideal option for high-end aggressively powered builds. Specifications Scale: 1/6th 1/7th Brushed/Brushless: BL Sensored/Sensorless: SL Waterproof: WP Cont./Peak Current: 160A/1050A Input: 3-8S LiPo/9-24 Cells NiMH BEC Output: Switch Mode:6V/7.4V,6A   Wires & Connectors Input Wires: Red-10AWG-200mm*1/Black-10AWG-200mm*1 Output Wires: Black-10AWG-200mm*3 Input Connectors: No Output Connectors: 6.5mm Famale Gold Connectors (pre-soldered onto the PCB)   Fan Size: 35.0x35.0x10.0mm Voltage Range: 5-7.4V Powered by: Powered by BEC   ESC Programing via SET Button on ESC: Supported LED Program Box: Supported LCD Program Box: Supported WiFi Module: Supported Program Port: FAN/Program Port   Firmware Firmware Upgrade: Supported   Size & Weight Size: 70.0x56.0x46.5mm Weight: 240g   Applications Motors: SL BL Motors/SD BL Motors(only in SL mode) Vehicles: 1/6th 1/7th Touring Car/Buggy/Truck KV Rating/T Count: 6S LiPo: KV≤1500/8S LiPo: KV≤1200(5892 Size Motors) Click here to look at the FAQ and Software Updates for EzRun MAX6 This is an extremely powerful brushless motor system. For your safety and the safety of those around you, we strongly recommend removing the pinion gear before performing calibration and programming functions with this system, and keeping wheels in the air when you turn on the ESC.  

1.795,-

2.195,-

KJØP
-18%
Hovedbilde Traxxas 9528 Tie-Bars Rear Alu Sledge
Traxxas 9528 Tie-Bars Rear Alu Sledge
Tie-Bars Rear Alu Sledge Tie bars, rear, 6061-T6 aluminum (blue-anodized)

159,-

KJØP
Hovedbilde Traxxas 9664G Shock Caps Alu Green GTX (4)
Traxxas 9664G Shock Caps Alu Green GTX (4)
Shock Caps Alu Green GTX (4) Shock caps, aluminum (green-anodized), GT-Maxx® shocks (4)/ spacers (4) (for Sledge™) Green-anodized aluminum shock caps add strength and style to Sledge GT-Maxx® shocks. Includes spacers.

589,-

629,-

KJØP
-6%
Hovedbilde Traxxas 6450 Spur Gear 50T Steel Wide + Pinion Gear ...
Traxxas 6450 Spur Gear 50T Steel Wide + Pinion Gear ...
Spur Gear 50T Steel Wide + Pinion Gear 20T 1.0M Set Spur gear, 50-tooth (machined, hardened steel) (wide-face)/ gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw The 50-tooth spur gear and 20-tooth pinion gear combo (1.0 metric pitch) is machined from solid steel with extra-wide steel teeth for ultimate power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Accessory part for these models: XRT

499,-

629,-

KJØP
-21%
Hovedbilde Traxxas 9573 Tires & Wheels Sledgehammer Belted 3.8'' ...
Traxxas 9573 Tires & Wheels Sledgehammer Belted 3.8'' ...
Traxxas 9573 Tires & wheels, assembled, glued (3.8" black wheels, belted Sledgehammer® tires, foam inserts) (2) Belted Sledgehammer® tires deliver game-changing stability and control whether you’re slinging mud or setting speed records. The wide, open-block tread design won’t clog up with dirt or debris and the lightweight belting maintains the tire’s shape for a larger contact patch, more grip, and responsive handling at any speed. Sledgehammer tires come pre-mounted to 3.8″ black Sledge wheels with an ultra-tough glue bead for the most extreme high-speed off-road action. Fits 17 mm splined hex, front or rear.

929,-

999,-

KJØP
-7%
Hovedbilde Traxxas 8637 Skid Plate Set
Traxxas 8637 Skid Plate Set
Skid plate set, front/ skid plate, rear/ 3x10 BCS (6)/ 3x30 BCS (1) (fits #8629 & 8630 bulkheads)

95,-

KJØP
Hovedbilde Traxxas 3426 Rubber Pit Mat Heavy Duty 91x51cm ... Hovedbilde Traxxas 3426 Rubber Pit Mat Heavy Duty 91x51cm ...
Traxxas 3426 Rubber Pit Mat Heavy Duty 91x51cm ...
Traxxas 3426 - Heavy Duty Rubber Pit-Table Mat New Traxxas pit mats are a perfect gift idea and companion for any hobbyist. The chemical-resistant, heavy-gauge rubber construction takes a pounding to help protect workbenches (or mom's kitchen table) from damage. The generous 36" x 20" (91.4 x 50.8cm) size is large enough to accommodate most Traxxas vehicles, with specially designed compartments to organize your parts and tools. Features: Heavy-gauge, chemical-resistant rubber construction protects underlying surfaces Multiple compartments for organizing tools and parts Large 36" x 20" (91.4 x 50.8cm) size accommodates most Traxxas vehicles Helps prevent spillage The perfect accessory for virtually any hobbyist

519,-

549,-

KJØP
-5%
Hovedbilde Vapex VPLIPOBAGE Storage Bag-E Li-Po 260x130x150mm Hovedbilde Vapex VPLIPOBAGE Storage Bag-E Li-Po 260x130x150mm
Vapex VPLIPOBAGE Storage Bag-E Li-Po 260x130x150mm
VAPEX LiPo-Safe Storage Bag-E 260x130x150mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. Features: Perfect storage bag for most RC batteries Zipper Flap/Top Bag-A, B, C & D fits inside it Size: 260x130x150mm We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended! Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

169,-

189,-

KJØP
-11%
Hovedbilde RPM 81512 Front Left A-arms for E-Revo 2.0 - ...
RPM 81512 Front Left A-arms for E-Revo 2.0 - ...
RPM Front Left A-arms for E-Revo 2.0 - Black Replaces stock Traxxas #8632 Quick Notes: 5g (per pair) lighter than stock Stronger than stock Replaces stock Traxxas #8632 While Traxxas may have beefed up the E-Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams per side less than stock, for a total weight loss of 10 grams! RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks! RPM front A-arms for the Traxxas E-Revo 2.0 are molded from our indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage. Tech Notes: RPM #81512 & #81515 replace stock Traxxas #8632. RPM E-Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.

199,-

KJØP
Hovedbilde RPM 81462 Front Right A-arms for E-Revo 2.0 - ...
RPM 81462 Front Right A-arms for E-Revo 2.0 - ...
RPM Front Right A-arms for E-Revo 2.0 - Black Replaces stock Traxxas #8631 Quick Notes: 5g (per pair) lighter than stock Stronger than stock Replaces stock Traxxas #8631 While Traxxas may have beefed up the E-Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams per side less than stock, for a total weight loss of 10 grams! RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks! RPM front A-arms for the Traxxas E-Revo 2.0 are molded from our indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage. Tech Notes: RPM #81462 & #81465 replace stock Traxxas #8631. RPM E-Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.

239,-

259,-

KJØP
-8%
Hovedbilde Traxxas 8619X Push Rod Alu Blue HD with Rod Ends (2) ...
Traxxas 8619X Push Rod Alu Blue HD with Rod Ends (2) ...
Push rods, aluminum (blue-anodized), heavy duty (2) (assembled with rod ends and threaded inserts)

299,-

KJØP
Hovedbilde Vapex Li-Po Battery 2S 7.4V 1300mAh 30C T-Connector
Vapex Li-Po Battery 2S 7.4V 1300mAh 30C T-Connector
Vapex Li-Po Battery 2S 7.4V 1300mAh 30C T-Connector Suitable for: Airplanes & Boats etc Battery: LiPo 2S 7.4V 1300mAh 30C 9.5Wh Max Discharge: 39A Continuous / 78A Burst Charge: Max 3C/3.9A (fast) Connector: T Wire: 13AWG Balance Connector: XH Length: 71.5 mm Width: 33 mm Height: 14.4 mm Weight: 70 g

199,-

KJØP
Hovedbilde Traxxas 8634 Suspension Arms Rear Left (1+1)
Traxxas 8634 Suspension Arms Rear Left (1+1)
Suspension arms, rear (left), heavy duty, adjustable wheelbase (upper (1)/ lower (1))

145,-

KJØP
Hovedbilde Traxxas 8633 Suspension Arms Rear Right (1+1) E-Revo 2
Traxxas 8633 Suspension Arms Rear Right (1+1) E-Revo 2
Suspension arms, rear (right), heavy duty, adjustable wheelbase (upper (1)/ lower (1))

145,-

KJØP
Hovedbilde Traxxas 5460A Aluminum GTR Shocks Blue ... Hovedbilde Traxxas 5460A Aluminum GTR Shocks Blue ...
Traxxas 5460A Aluminum GTR Shocks Blue ...
This is a set of four optional Traxxas Aluminum Body GTR Shocks in Blue. FEATURES: Fits the Traxxas Revo, E-Revo, Summit, Slayer and Jato           Machined threaded aluminum body with oversized spring collar for             precise preload adjustments           Vented spring perches help prevent dirt from packing around the             X-ring seals           Exclusive X-ring seals for better sealing with less friction           Volume-compensating bladders ensure perfect damping throughout the             damping range INCLUDES: Four Shocks with Silicone Fluid REQUIRES: Springs depending on vehicle and desired damping action

729,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png