Hopp til innhold
Hjem / Batteri & lader / Ladeposer/Lipobag / Vapex LIPOBAGA Charging Bag-A Li-Po 175x225mm

Vapex LIPOBAGA Charging Bag-A Li-Po 175x225mm

Art.nr: VPLIPOBAGA

79,-

Vapex
På lager: 9

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Charging Bag-A Li-Po 175x225mm

VAPEX LiPo-Safe Bag-A 175x225mm

Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage.

We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended!
 

Features:

  • Fits many different medium sized batteries for most 1/10 cars, boats & airplanes
  • Fits inside the storage Bag-E
  • Envelope Style
  • Velcro Flap
  • Size: 175x225mm


Warning:

  • Never leave batteries unattended while being charged
  • Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete
  • Always seal the LiPo Safe Bag while charging
  • The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

Produsent

Vapex

Relaterte produkter

 

Hovedbilde Vapex VPLIPOBAGB Charging Bag-B Li-Po 230x295mm Hovedbilde Vapex VPLIPOBAGB Charging Bag-B Li-Po 230x295mm
Vapex VPLIPOBAGB Charging Bag-B Li-Po 230x295mm
Art.nr: VPLIPOBAGB
Copied
Charging Bag-B Li-Po 230x295mm VAPEX LiPo-Safe Bag-B 230x295mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended!   Features: Fits many different batteries for most cars, boats & airplanes (including all Traxxas LiPo batteries) Fits inside the storage Bag-E Envelope Style Velcro Flap Size: 230x295mm Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

89,-

99,-

KJØP
-10%
Hovedbilde Vapex VPLIPOBAGC Charging Bag-C Li-Po 185x75x60mm Hovedbilde Vapex VPLIPOBAGC Charging Bag-C Li-Po 185x75x60mm
Vapex VPLIPOBAGC Charging Bag-C Li-Po 185x75x60mm
Art.nr: VPLIPOBAGC
Copied
VAPEX LiPo-Safe Bag-C 185x75x60mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended!   Features: Fits many different batteries for most cars (including all Traxxas LiPo's), boats and airplanes Velcro Flap Fits inside the storage Bag-E Size: 185x74x60mm Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

89,-

KJØP
Hovedbilde Vapex VPLIPBAGD Charging Bag-D Li-Po 125x64x50mm Hovedbilde Vapex VPLIPBAGD Charging Bag-D Li-Po 125x64x50mm
Vapex VPLIPBAGD Charging Bag-D Li-Po 125x64x50mm
Art.nr: VPLIPOBAGD
Copied
VAPEX LiPo-Safe Bag-D 125x64x50mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended! Features: Perfect for 1/16-1/18 car batteries, 1-2s Shorty LiPo's and smaller airplane batteries Fits inside the storage Bag-E Velcro Flap Size: 125x64x50mm Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

79,-

89,-

KJØP
-11%
Hovedbilde Vapex VPLIPOBAGE Storage Bag-E Li-Po 260x130x150mm Hovedbilde Vapex VPLIPOBAGE Storage Bag-E Li-Po 260x130x150mm
Vapex VPLIPOBAGE Storage Bag-E Li-Po 260x130x150mm
Art.nr: VPLIPOBAGE
Copied
VAPEX LiPo-Safe Storage Bag-E 260x130x150mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. Features: Perfect storage bag for most RC batteries Zipper Flap/Top Bag-A, B, C & D fits inside it Size: 260x130x150mm We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended! Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

169,-

189,-

KJØP
-11%

Kunder kjøpte også

Hovedbilde SkyRC S100 Neo Computerlader AC100W/DC200W Hovedbilde SkyRC S100 Neo Computerlader AC100W/DC200W
SkyRC S100 Neo Computerlader AC100W/DC200W
SkyRC S100 Neo er ett godt valg for deg som ønsker en kompakt og kraftig lader. S100 Neo har en makseffekt vil gi deg muligheten for 100W lading med AC og 200W DC. Maks ladestyrke er 12A på XT60 porten. Laderen bruker tre knapper til manøvrering i menyene, har innebygget balanserer og XT60-type tilkoblingspunkter. Laderen har også en USB-C PD-port som gir deg muligeten til å lade mobil og andre dingser. Denne laderen er en multilader som kan lade LiPo, LiHV, LiFe, LiIon, NiHm, NiCd og Pb batterier. Laderen går på vanlig nettstrøm 220V, eventuelt på 6-30V DC. Det følger med 220V strømkabel, batterier med XT60-kontakt kobles direkte i XT60-utgang på laderen. Skal man lade batterier med annen type batteriplugg må overgang benyttes, dette må kjøpes løst. XH-balanseringsplugg plugges direkte i balanseringsutgangen på lader. Spesifikasjoner: Vekt 340gram Innspenning AC 100-240V Innspenning DC 6-30V Display 128x160p m/farge Størrelse 105xx105x62mm Antall celler LiPo 1-6 Antall celler NiMh/NiCD 1-15 Discharge 20W Maks Ladestyrke 0.1-12,0A Viktig info! Husk at ved lading av lipo batterier skal man for å oppnå full balansering av pakken kople til begge kontaktene fra batteriet og velge LiPo Balance programmet, ikke LiPo Charge. Inkludert i eska: S100 Neo laderen, engelsk manual og 220V strømkabel.

699,-

799,-

KJØP
-13%
Hovedbilde WLToys 124010 Buggy 1/12 4WD Exciting Orange Hovedbilde WLToys 124010 Buggy 1/12 4WD Exciting Orange
WLToys 124010 Buggy 1/12 4WD Exciting Orange
WLToys 124010 Buggy 1/12 4WD Exciting Orange Rask Buggy som leveres komplett og har en toppfart på 50km/h! Bilen leveres med 4WD, et modulært 2s 1300mah LiPo batteri og kraftig børstemotor som gir ekstrem akselerasjon og toppfart. Levereres helt komplett med unntak av 4stk AAA-batterier til radio. PS! Produkt kan avvike fra video. Klippet er lagt til som relevant opplysning til produktet, men er ikke nødvendigvis identisk. Innhold i en produktvideo, testvideo eller et review kan avvike fra produktet som selges. Dette kan gjelde farger, spesifikasjoner, versjonsforskjeller, regionsforskjeller m.m. Det er produktets navn, beskrivelse og bilder du skal forholde deg til ved kjøp av varen.   1/12-skala Bilen er i 1/12-skala, en god kombinasjon mellom størrelse, vekt og ytelse. Drivaksler ut til hjulene er i metall og bilen har blant annet et modulært dempertårn og chassisdesign. Uavhengig hjuloppheng både foran og bak med kraftige dempere. Hastighet- og svingjustering er trinnløs og fjernkontrollen er på 2.4G så mange kan kjøre samtidig uten forstyrrelser. Denne versjonen har også kjølevifte til ESC og kjøleribbe til motor påmontert. Batteri og lading Bilen leveres med ett 2S 1300mAh LiPo-batteri med Deans-type kontakt. Batteriet er modulært og slides enkelt på plass i batterirommet. Det følger med lader til dette batteriet. Radio/Sender trenger 4stk AAA-batterier, dette må kjøpes i tillegg. Lader er av USB-typen og kan lade batteriet på ca. 2t timer. Ønsker man lader som kan brukes rett i stikkontakten hjemme, lader raskere og har kontroll på ladetid, spenning med mer så ligger det alternativ lader som tilbehør. Husk da også å kjøpe med deans-ladekabel og XH Balanseringsforlenger for 2S.   Spesifikasjoner Lengde 347mm Bredde 211mm Høyde 122mm Motor Børste 560 ESC/Mottaker 2in1 børste Sender/Radio 2.4GHz (inkludert) Kjøretid Ca. 10-20minutter Ladetid Ca. 2t Rekkevidde 100m+ Skala 1/12 Vekt 935g m/batteri   Innhold 1x RC Buggy 1x Radio 2.4GHz 1x Batteri 1x USB-lader 1x Manual 1x Vertøy

1.349,-

1.399,-

KJØP
-4%
Hovedbilde D-MAX B9860 Connector Adapter Tamiya (female) - T-Plug ... Hovedbilde D-MAX B9860 Connector Adapter Tamiya (female) - T-Plug ...
D-MAX B9860 Connector Adapter Tamiya (female) - T-Plug ...
Denne er fin hvis du har en esc med Deans kontakt og har et batteri med Tamiya kontakt. DynoMAX Connector Adapter Tamiya (female) - T-Plug (female) This is an practical connector adapter for batteries with a Tamiya connector where you want to change it to a T-Plug without soldering etc.   It also works if you have an charge lead with an T-plug but you have an vehicle with a Tamiya connector system.

35,-

KJØP
Hovedbilde Traxxas 2640 Chrome Suspension Pin w/Clip 44mm (2)
Traxxas 2640 Chrome Suspension Pin w/Clip 44mm (2)
This is a pair of chrome suspension pins used to hold the front suspension arms on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER. Includes: two chrome  suspension pins and   three "E" type retaining clips. Requires:nothing parts are a direct replacement. Specs:3mm x 44mm  pins are notched for the 3MM "E" type retaining clips at each end.

29,-

39,-

KJØP
-26%
Hovedbilde Traxxas 2754 Stub Axles Pins (4)
Traxxas 2754 Stub Axles Pins (4)
These pins slide through the axle and hold the wheel to the axle. INCLUDES:  4- stub axle pins

15,-

KJØP
Hovedbilde Traxxas 2825X Li-Po Battery 2S 7.4v 3500mAh 25C ...
Traxxas 2825X Li-Po Battery 2S 7.4v 3500mAh 25C ...
Traxxas 2825X - 3500mAh 7.4V 2-Cell 25C LiPo Battery The 3500 mAh 2-cell LiPo battery delivers maximum punch and long runtimes for your Mini Maxx®. Traxxas Certified iD®-Equipped LiPo batteries provide the on-demand power to reach the top speeds that Traxxas models are built to deliver. Traxxas’ exclusive iD battery system is the easier and safer way to charge your Traxxas batteries. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available. Specs: Type: LiPo Total Capacity: 3500mAh Voltage: 7.4 C Rating: 25 Length: 110mm Height: 22mm Width: 35mm

529,-

579,-

KJØP
-9%
Hovedbilde Traxxas 3070X Connector Traxxas iD Male (2) (for ESC)
Traxxas 3070X Connector Traxxas iD Male (2) (for ESC)
Traxxas® connector (male) (2) - FOR ESC USE ONLY

65,-

KJØP
Hovedbilde Traxxas 2270 Servo 17Kg Digital BB Metal Gear Sealed Hovedbilde Traxxas 2270 Servo 17Kg Digital BB Metal Gear Sealed
Traxxas 2270 Servo 17Kg Digital BB Metal Gear Sealed
Traxxas 2270 High-Torque Digital Metal Gear Servo The waterproof, high-torque 2270 servo is the perfect upgrade for 1/10 scale vehicles. With 17kg/cm of torque on tap and full metal gears, the 2270 servo provides a significant performance boost over the standard 2075 servo lineup. SPECIFICATIONS: Torque: 236 oz-in @ 6.0V Speed: 0.175 sec/60° @ 6.0V Waterproofing: Sealed case with O-ring Gears: Metal Case: Plastic with full ball bearings Dimensions: 55 mm H x 44.5 mm L x 20 mm W Length: 55 mm Height: 44,5 mm Width: 20,0 mm Speed at 6,0V: 0,175 sec/60° Torque at 6,0V: 17 kg/cm Features: Digital , Metal Gears

749,-

799,-

KJØP
-6%
Hovedbilde Traxxas 2250 Servo High-Torque 330 24kg Metal gear ... Hovedbilde Traxxas 2250 Servo High-Torque 330 24kg Metal gear ...
Traxxas 2250 Servo High-Torque 330 24kg Metal gear ...
High-Torque 330 Blue Servo The Traxxas High-Torque 330 Blue servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A powerful coreless motor provides 330 ounce-inches of torque for the most demanding applications.* The High-Torque 330 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit. The Power to Perform With over 3 times more torque than the standard TRX 2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single TRX 2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo.     For TRX-4 Installation The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit TRX 2262 and a steel servo horn TRX 8247X is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits.   Waterproof Not "Water Resistant" Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines.           HIGH-TORQUE 400 RED FEATURES Factory fit for drop-in installation into Traxxas Models Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management™ (TSM) 400 oz-in torque Metal gears Dual ball bearings Brushless motor technology Aluminum center case       SPECIFICATIONS Motor Type:   Brushless Operating Voltage:   6.0 - 7.4V DC Speed:   0.15 sec/60° Weight:   64g Gears:   Metal Output Spline:   25T Case:   Plastic top/bottom, anodized aluminum center Controller:   Digital   APPLICATION GUIDE   Compatible with most Traxxas 1/10 scale electric models* Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn Compatible with Traxxas nitro models using rechargeable 5-cell battery packs Not recommended for X-Maxx     High-Torque Blue 330 Waterproof Metal-Gear Coreless Digital Servo For the ultimate experience in precision steering authority, two new high-torque metal gear waterproof servos are available from Traxxas. Traxxas high-torque servos are designed for a factory fit in 1/10 Traxxas vehicles and both servos feature full metal gears, dual ball bearings, and waterproof cases with aluminum center sections for added heat dissipation. Both servos are designed to work flawlessly with Traxxas Stability Management for laying down maximum power on any surface. The High-Torque Blue 330 is powered by a coreless motor for 24 kg/cm of torque and 0.19 transit time. For optimum control and responsiveness, the High-Torque Red 400 uses brushless motor technology for a massive 29 kg/cm of torque and 0.15 transit time.   Factory fit for drop-in installation into Traxxas models Waterproof 24 kg-cm of torque and 0.19 transit time Metal gears Dual ball bearings Coreless motor technology Aluminum center case SPECIFICATIONS: Motor Type: Coreless Operating Voltage: 6.0-7.4V Torque: 24 kg/cm @ 6.0V Speed: 0.19 sec/60° @ 6.0V Weight: 64g Gears: Metal Output Spline: 25T Case: Plastic top/bottom, anodized aluminum center Controller: Digital

895,-

995,-

KJØP
-10%
Hovedbilde Traxxas 3215 Back Plate Screws 2.5x6mm (6)
Traxxas 3215 Back Plate Screws 2.5x6mm (6)
This is the stock replacement backplate screw set for the Image .12 Traxxas engine. Features: cap-head aluminum design Includes 6  2.5x6mm cap-head (sockethead) screws

29,-

KJØP
Hovedbilde Gens Ace Imars S100 G-Tech 100W White Hovedbilde Gens Ace Imars S100 G-Tech 100W White
Gens Ace Imars S100 G-Tech 100W White
Gens Ace Imars S100 G-Tech 100W White G-Tech XT60 tilkobling 100W AC Kompakt design Gens Ace Imars S100 Charger kan lade flere ulike typer batterier inkludert LiPo og kan brukes både på 220V hjemme. Ladeutgangen er XT60 og det følger med overganger till EC5, Deans og EC3-type plugger. Det følger også med strømledning og USB-kabel. S100 er også designet for smartlading G-Tech batterier fra Gens Ace. Leveres med norsk veggstøpsel. PS! Produkt kan avvike fra video. Klippet er lagt til som relevant opplysning til produktet, men er ikke nødvendigvis identisk. Innhold i en produktvideo, testvideo eller et review kan avvike fra produktet som selges. Dette kan gjelde farger, spesifikasjoner, versjonsforskjeller, regionsforskjeller m.m. Det er produktets navn, beskrivelse og bilder du skal forholde deg til ved kjøp av varen.   G-Tech Har man G-tech lader og batteri, vil lader kommuniserer med batteriet via balanseringspluggen. Her får laderen informasjon om batteriet som celleantall, spenning, kapasitet og helse. Laderene velger da korrekt ladeprogram og ladestyrke automatisk. Ladestyrke kan endres manuelt etter oppstart ved behov.G-Tech kontakten er kompatibel med vanlige LiPo-ladere med XH-balanseringsport så man kan lade dette batteriet på samme måte som vanlige LiPo-batterier. Imars S100 er enkel og prisgunstig G-Tech lader som kan blant annet kan lade vanlige LiPo, LiHV, LiFe og NiMh-batterier og G-Tech varianter. På 220V har laderen max effekt på 100W totalt på utgangen. Dette gjør at man kan lade ett stk LiPo: 2S LiPo på 13.4A, 3S LiPo 8A, 4S LiPo 6-7A, 6S LiPo ca. 4A.   Spesifikasjoner: Vekt 260gram Innspenning AC 100-240V Størrelse 139.8x83x40mm Antall celler LiPo/LiFe/LiHv 2-6S Antall celler NiMh 4-18 Ladestyrke 0.1-10A Maks Ladeeffekt AC 100W Utladeeffekt 0.4A (Maks) Skal man lade batterier med andre typer strømkontakt, må tilbehør kjøpes. Se under for tilbehør. Viktig info! Husk at ved lading av lipo batterier skal man for å oppnå full balansering av pakken kople til begge kontaktene fra batteriet og velge LiPo Balance programmet, ikke LiPo Charge.

795,-

895,-

KJØP
-11%
Hovedbilde M-Drive 50500 Shock Tool Universal
M-Drive 50500 Shock Tool Universal
M-Drive MD50500 - Universal Shock tool Aluminium This is a practical and universal tool for wrenching on your RC car shocks. It has allocations for 3, 3.5 & 4mm diamater shock shafts and two different shock bodies (dont apply too much force when pinching shock bodies). Use it also for pivot ball assembly/removal (4.5/2.5mm pin).

299,-

319,-

KJØP
-6%
Hovedbilde Traxxas 8796-BLUE Car Stand Alu 1/10-1/8 Hovedbilde Traxxas 8796-BLUE Car Stand Alu 1/10-1/8
Traxxas 8796-BLUE Car Stand Alu 1/10-1/8
Traxxas 8796-BLUE - Car and Truck Stand Work Like a Pro with the Traxxas RC Stand! Designed to fit almost any 1/8 and 1/10 scale vehicle, the aluminum Traxxas RC stand is the perfect addition to your workbench. Made from high-quality aluminum and anodized with a brilliant blue finish, the RC stand is built for years of dependable service. The stand swivels a full 360° on dual ball bearings for smooth, precise action. A handy locking lever secures the stand in one of 16 different positions for maximum stability. Pick up your Traxxas RC stand today and start working like a pro! RC Stand Features: Engineered for the full range of Traxxas 1/10 to 1/8 scale vehicles Use with TRX-4M foam stand (9794) for 1/18 scale models Use with Foam Inserts (8794) for LaTrax 1/18 scale and Traxxas 1/16 Scale models Tough aluminum construction with a brilliant blue finish Dual ball bearings for smooth 360° rotation Locking lever with 16 positions Non-slip foam pads on top and bottom Perfect for maintaining and storing vehicles Prevents flat-spotting of tires Compatible with 1/18 TRX-4M™ The Traxxas RC stand features cutouts for the TRX-4M display stand (9794, sold separately) to securely hold 1/18 scale models for storage and maintenance. Compatible with LaTrax 1/18 Scale and Traxxas 1/16 Scale Models The foam insert set for the Traxxas RC Stand (8794, sold separately) accommodates smaller scale models.

479,-

519,-

KJØP
-8%
Hovedbilde Traxxas 8212 Hood Vents (Body #8213)
Traxxas 8212 Hood Vents (Body #8213)
Traxxas 8212 - Hood vents Hood vents (left & right)/ retainers (left & right) (for clipless body mounting) (attaches to #8213 series bodies) Molded hood vents and retainers for 8213-series clipless bodies. Replacement part for these models: TRX-4® Sport High Trail Edition™

49,-

KJØP
Hovedbilde Traxxas 2576 Button Head Machine Screw 3x8mm Revo (6)
Traxxas 2576 Button Head Machine Screw 3x8mm Revo (6)
These are Traxxas 3x8mm Button Head Screws. FEATURES: Black steel construction with hex head INCLUDES: Six screws REQUIRES: 2mm hex wrench.

35,-

Ikke på lager
Hovedbilde Tamiya 86008 PS-8 Polycarbonate Spray Light Green 3 oz
Tamiya 86008 PS-8 Polycarbonate Spray Light Green 3 oz
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-8 Light Green).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.                    Highly flammable.

109,-

KJØP
Hovedbilde Traxxas 4175 Tires & WHeels Paddel/ All-Star Black ... Hovedbilde Traxxas 4175 Tires & WHeels Paddel/ All-Star Black ...
Traxxas 4175 Tires & WHeels Paddel/ All-Star Black ...
  Tires & wheels, assembled, glued (2.8") (All-Star black chrome wheels, paddle tires, foam inserts) (nitro rear/electric front) (2) (TSM rated) Fits: Mainly 4WD 1/10 Monster Trucks such as Traxxas Stampede 4x4 Front & Rear May fit other Trucks also with 12 mm wheel hexes    

479,-

499,-

KJØP
-4%
Hovedbilde Traxxas 8119 Mirrors and Snorkel Set TRX-4 Sport Hovedbilde Traxxas 8119 Mirrors and Snorkel Set TRX-4 Sport
Traxxas 8119 Mirrors and Snorkel Set TRX-4 Sport
Mirrors, side (left & right)/ snorkel/ mounting hardware

99,-

KJØP
Hovedbilde Traxxas 8116 Grill TRX-4 Sport Hovedbilde Traxxas 8116 Grill TRX-4 Sport
Traxxas 8116 Grill TRX-4 Sport
Grill/ grill retainers (2)/ headlight housing (2)/ lens (2) (fits #8111 body

119,-

KJØP
Hovedbilde Traxxas 3665X Tires & Wheels Terra Groove/Satin Chrome ...
Traxxas 3665X Tires & Wheels Terra Groove/Satin Chrome ...
Tires & wheels, assembled, glued (chrome wheels, Terra Groove dual profile tires, foam inserts) (nitro rear/ electric front) (2)

399,-

KJØP
Hovedbilde Traxxas 8213 Body TRX-4 Sport (Clipless) Clear
Traxxas 8213 Body TRX-4 Sport (Clipless) Clear
Traxxas 8213 - Body, TRX-4® Sport, Clear Body, TRX-4® Sport (clear, trimmed, die-cut for clipless mounting, requires painting)/ window masks/ decal sheet From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and Traxxas ProGraphix® paint makes it easy to get professional quality results. Body comes fully-trimmed for clipless body mounts and a protective overspray film applied. Window masking and decals also come in the kit. Clipless body mounts, Expedition Rack, and scale accessories sold separately. Designed for 312 mm wheelbase. Accessory part for these models: TRX-4® 1972 Chevrolet® Blazer® High Trail Edition™ TRX-4® 1979 Chevrolet® Blazer® TRX-4® 1979 Ford® Bronco® TRX-4® Equipped with Traxx® TRX-4® Sport High Trail Edition™ TRX-4® Sport Unassembled Kit TRX-4® Sport

499,-

649,-

KJØP
-23%
Hovedbilde Traxxas 9216 Latch Body Mounts Ford Bronco 2021
Traxxas 9216 Latch Body Mounts Ford Bronco 2021
Latch Body Mounts Ford Bronco 2021   Latch, body mount (2)/ 3x8 BCS (8)

89,-

KJØP
Hovedbilde Traxxas 9069 Wheel Hubs 12mm Hex Steel HD (4) (for ...
Traxxas 9069 Wheel Hubs 12mm Hex Steel HD (4) (for ...
Wheel hubs, 12mm hex (steel), extreme heavy duty (4)/ 2x9.8mm pin (4) (for use with #9080 upgrade kit and 6mm axles) Set of four replacement 12 mm steel wheel hubs for the 9080-series Extreme Heavy Duty Upgrade Kit. Includes 2x9.8 mm pins (4). Wheel hubs are for use with the 9080 upgrade kit only and will not fit standard axles.

129,-

139,-

KJØP
-7%
Hovedbilde Traxxas 8117 Tailgate TRX-4 Sport
Traxxas 8117 Tailgate TRX-4 Sport
Tailgate panel/ tailgate retainers (2)/ tailgate mount/ tail light lens (2) (left & right)/ 2.5x8 BCS (4) (fits #8111 or #8112 body)

119,-

KJØP
Hovedbilde 108076-1 Mini XRT RTR TQi VXL-3s Red - USB-C Charger / ... Hovedbilde 108076-1 Mini XRT RTR TQi VXL-3s Red - USB-C Charger / ...
108076-1 Mini XRT RTR TQi VXL-3s Red - USB-C Charger / ...
Traxxas 108076-1-RED- Mini XRT® 3s Brushless Mini Monster Race Truck - RED Extreme 3s Performance. Compact Size. Mini XRT® is a true rocket with full 1/10 scale Velineon® 3s brushless power in a compact, take-anywhere size. Mini XRT lives up to its name with unprecedented 88+ kph speed and ferocious acceleration, backed by race-inspired engineering and unrivaled toughness. Mini XRT shatters all expectations with big-scale performance and toughness that fits in a backpack. Bred For Performance Like its X-series™ counterpart, Mini XRT was engineered with maximum focus on speed, handling, and performance. A low, ultra-wide stance delivers supreme confidence and control as Mini XRT muscles its way to 88 kph and beyond. It’s a whole new way to experience big-scale fun and toughness in a backpack-friendly size. 1/10 Scale VXL-3s Brushless Power The Velineon VXL-3s brushless power system is the heart of Traxxas’ fastest and most powerful 1/10 scale vehicles. For the first time ever, this extreme 11.1-volt powerplant now comes installed in a compact platform. The result is astonishing acceleration, 88+ kph speed, and wheel-standing power at any rpm. 1/10 Scale 4X4 Driveline Adding 3s Velineon power to a compact platform requires bold engineering. Mini XRT comes outfitted with the proven driveline components of Traxxas’ toughest 1/10 scale 4X4 trucks. Front, center, and rear steel-gear differentials, along with 32-pitch gearing and HD driveshafts, far exceed requirements for strength and long life. Maxx Chassis Technology Mini XRT is the newest truck to use the revolutionary chassis design pioneered in Mini Maxx®. Perfectly sized to fit into a backpack, Mini XRT transforms full-scale performance and durability into a supremely compact chassis. Just one look at the rigid, unified structure and you know it’s built Maxx tough. Clipless Body Mini XRT’s innovative clipless body is rock solid and easy to use. Just drop the body onto the chassis and snap it into place for a secure hold. When it’s time to change the battery, depress the tabs under the wheel wells and lift to access the chassis. Nothing else is faster or latches more securely. WideMaxx Suspension Mini XRT relies on proven WideMaxx® suspension design to deliver sure-footed grip and laser-focused handling. Mini XRT sits low and wide for hard cornering and maximum stability at speed. The long-travel suspension delivers refined damping control to maintain composure over the roughest terrain. Truck Specs: Length: 376mm Width: 279mm Ground Clearance: 27mm Weight: 1.81kg Height: 127mm Wheelbase: 220mm Shock Length: 88mm Tire Diameter: 94mm Wheel Diameter: 2.1" (53mm) outer, 2.6" (66mm) inner Speed Control: VXL-3s brushless ESC Motor (electric): Velineon 3500 (3500 Kv) Transmission: Direct-drive with center differential Overall Drive Ratio: 7.36:1 Differential Type: Planetary, steel gear Gear Pitch: 32 Chassis Structure/Material: Composite modular tub Brake Type: Electronic Drive System: Shaft-driven 4WD Steering: Double-shear bellcrank Wheels & Tires: Black dual-profile XRT wheels with pre-glued 4" Gravix tires Radio System: TQi 2.4 GHz high output (2-channel) with TSM Servo: Waterproof high-torque, metal-gear 2075X Top Speed: 88+ kph (with optional 3s LiPo) Skill Level: 1 Battery Tray: L113 x W41 x H22mm Required Batteries: 4 “AA” (transmitter) Motor specs: Type: Velineon 3500 Kv sensorless brushless Length: 77mm Diameter: 36mm Connector Type: 3.5 mm bullet ESC Specs: Input Voltage (cells): 7.4 – 11.1 volts, 2s–3s LiPo BEC Voltage: 6.0 volt Reverse Delay: Yes, with lockout Thermal Protection: Two-stage thermal shutdown Ports: Auxiliary fan What’s In The Box: Mini XRT Ready-To-Race monster truck Velineon VXL-3s brushless power system 3500 mAh 2-cell LiPo battery 2-amp USB-C charger Quick Start Guide TQi 2.4 GHz radio system High quality maintenance tools What You’ll Need: AA Alkaline Batteries: Four for the transmitter Charging Accessories: Power adapter 2912 and power cable 2916 recommended for peak charging performance

4.995,-

5.395,-

KJØP
-7%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png