Hopp til innhold

71076-8 E-revo 1/16 VXL

 
Art.nr: BULK TRX 3375
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** Ny men leveres uten embalasje. This is the Velineon VXL3m Electronic Speed Control from Traxxas. FEATURES: Brushless control           11.1V 3S LiPo battery capability           Low voltage detection           2 stage thermal protection           Waterproof           Multi-color LED           EZ-Set push button setup INCLUDES: One VXL3m Electronic Speed Control REQUIRES: Installation on the vehicle SPECS:    Input Voltage: 6 to 12 cell NiMH, 2S to 3S LiPo           Motors: Sensorless Brushless           Motor Limit: None           Continuous Current: 52A           Peak Current: 326A           BEC Voltage: 6.0V DC           Transistor Type: MOSFET           On-Resistance: 0.0005 ohms           PWM Frequency: 12,000Hz           Motor Connectors: Traxxas 3.5mm bullet connectors           Motor/Battery Wiring: 16-Gauge           Thermal Protection: Two-Stage Thermal Shutdown           Weight: 38g (1.34oz) REQUIRES: Installation on the vehicle SPECS:    Input Voltage: 6 to 12 cell NiMH, 2S to 3S LiPo           Motors: Sensorless Brushless           Motor Limit: None           Continuous Current: 52A           Peak Current: 326A           BEC Voltage: 6.0V DC           Transistor Type: MOSFET           On-Resistance: 0.0005 ohms           PWM Frequency: 12,000Hz           Motor Connectors: Traxxas 3.5mm bullet connectors           Motor/Battery Wiring: 16-Gauge           Thermal Protection: Two-Stage Thermal Shutdown           Weight: 38g (1.34oz)

1.295,-

1.595,-

På lager 1
KJØP
-19%
Art.nr: TRX 1726
Copied
This is a replacement antenna tube. Antenna tubes are used to help secure and protect reciever antenna wires. INCLUDES: 1 blue antenna tube and 1 black antenna tube cap. SPECIFICATIONS: Length: 11"                 Outside Diameter: 1/8"

29,-

På lager 19
KJØP
Art.nr: TRX 1747G
Copied
 This is a package of four 4mm Flanged Locknuts in Green from Traxxas. FEATURES: May be used in any application requiring this size locknut           Serrated rear section ensures sure grip INCLUDES: Four 4mm Flanged Locknuts REQUIRES: 7mm Nut Driver SPECS:    Hex Size: 7mm           Hole Diameter: 4mm

99,-

109,-

På lager 1
KJØP
-9%
Art.nr: TRX 1747R
Copied
These are the 4mm Flanged Nylon Locknuts from Traxxas. FEATURES: Aluminum construction anodized blue in color           Serrated on the back for sure grip INCLUDES: Four 4mm Flanged Nylon Locknuts REQUIRES: 6mm nut driver SPECS:    Hole Diameter: 4mm           Hex Size: 6mm

99,-

109,-

På lager 1
KJØP
-9%
Art.nr: TRX 1918
Copied
This gear is a brass pinion gear in 48 pitch Features:  Brass pinion gear Includes:  1 gear and 1 set screw Specs:     Brass, 48 pitch, 18 tooth pinion gear. Shaft length- 3/16"  Gear length- 1/4"  Overall length- 7/16" Shaft diameter- 1/4"  Gear diameter- 7/16" Mounting shaft (motor shaft) 1/8"

39,-

På lager 2
KJØP
Art.nr: TRX 2081
Copied
This is the Servo Case with Gaskets for the               Traxxas VXL Micro Waterproof Servo TRX 2081. FEATURES: Nylon construction           Blue in color INCLUDES: One Servo Case (Top, Middle, and Bottom Sections)           Five Gaskets           Instruction sheet REQUIRES: Installing remaining servo components

79,-

På lager 1
KJØP
Art.nr: TRX 2082
Copied
This is the Servo Gear Set for use on the                Traxxas VXL Micro Waterproof Servo TRX 2080. FEATURES: Nylon construction           Grey in color INCLUDES: One Output Gear           One Top Reduction Gear           One Center Reduction Gear           One Bottom Reduction Gear           Instruction sheet REQUIRES: Installation on the servo

59,-

På lager 1
KJØP
Art.nr: TRX 2082A
Copied
Traxxas 2082A Gear Set for Servo 2080A

59,-

På lager 5
KJØP
Art.nr: TRX 2082X
Copied
Gear set, metal (for 2080X micro waterproof servo)

229,-

249,-

På lager 3
KJØP
-8%
Art.nr: TRX 2419
Copied
This is a Traxxas 19T 48P Pinion Gear. FEATURES: Metal construction           Grey in color INCLUDES: One 19T 48P Pinion Gear           One Set Screw REQUIRES: Installation  

39,-

På lager 4
KJØP
Art.nr: TRX 2423
Copied
This is a 23 Tooth 48 Pitch Pinion Gear By Traxxas FEATURES: Pinion gear with set screw, Silver in color INCLUDES: (1) 23 Tooth 48 Pitch Pinion Gear           (1) One 4mmx2mm set screw REQUIRES: Installation SPECS:    Outer Diameter: 14mm (9/16")           Inner Diameter: 11mm (7/16")

39,-

49,-

På lager 3
KJØP
-20%
Art.nr: TRX 2431
Copied
This is a 31 Tooth, 48 Pitch Pinion Gear with Set Screw                                from Traxxas. FEATURES: Steel construction, silver in color INCLUDES: One 31 Tooth, 48 Pitch Pinion Gear           One 3x4mm Set Screw (1.5mm hex size) REQUIRES: Installation SPECS:    Length: .42" (10.5mm)           Inside Diameter: 1/8"           Outside Diameter: .69" (17.5mm)

39,-

49,-

På lager 3
KJØP
-20%
Art.nr: TRX 2514
Copied
     This is a Sponsor Decal Set for R/C Cars                                 from Traxxas. FEATURES: These decals are designed to be used on any scale lexan R/C car and             truck bodies.           Pressure sensitive, peel and stick vinyl decals.           These are the contingency/sponsorship decals that are used on race             cars.           Logos include: Traxxas, Lunati Cams, Hedman Hedders, Simpson, MSD,             Mr. Gasket, NOS, Accel, Hurst, and more.           Multi-purpose decal set is appropriate for any type of car. INCLUDES: One Sponsor Decal Set. SPECS:    Length: 9-1/8" (23.2cm)           Width:  5-1/8" (13.0cm)

59,-

På lager 4
KJØP
Art.nr: TRX 2523
Copied
These are the 2.5x10mm Countersunk Machine Flat Head Screws           for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Steel construction           Black in color INCLUDES: Six Countersunk Machine Flat Head Screws REQUIRES: Installation on the vehicle SPECS:    Length: 10mm           Diameter: 2.5mm

35,-

På lager 2
KJØP
Art.nr: TRX 2526
Copied
These are the 2.5x12mm Countersunk Machine Hex Drive Screws           for use on Traxxas. FEATURES: Steel construction           Black in color INCLUDES: Six Countersunk Machine Screws REQUIRES: Installation on the vehicle SPECS:    Length: 12mm           Width: 2.5mm

35,-

På lager 1
KJØP
Art.nr: TRX 2554
Copied
These are 3x5mm Backplate screws for the Traxxas 2.5 Engine. FEATURES: Black steel construction. INCLUDES: Six black steel cap head screws. REQUIRES: Assembly on coverplate. SPECS:    Length: 5mm           Diameter: 3mm COMMENTS: These may also be referred to as coverplate screws.

35,-

På lager 4
KJØP
Art.nr: TRX 2976G
Copied
This is the Traxxas AC to DC Power Supply Adapter.     FEATURES Designed specifically for use with the Traxxas peak detecting DC  2-4A fast chargers and allows them to be powered from a standard  220V AC outlet  No on/off switch, plug in to turn on and unplug to turn off, unplug  when not in use   INCLUDES Traxxas AC to DC Power Supply Adapter with 110 Power Cord and 12V  Output Cord with Socket   SPECIFICATIONS Input 100 - 240V AC, 50-60Hz, 1.0A  Output: 13.8V, 3.5A   COMMENTS For dry locations and indoor use only. Do not expose to moisture.  Do not open case, risk of electrical shock.

349,-

369,-

På lager 7
KJØP
-5%
Art.nr: TRX 3063X
Copied
This is the Series Battery Connection Wire Harness for use               on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Traxxas IDConnectors           Combines voltage of connected batteries for increased speed INCLUDES: One Wire Harness with instruction sheet REQUIRES: Installation between batteries and ESC

109,-

På lager 3
KJØP
Art.nr: TRX 3064X
Copied
Wire harness, parallel battery connection (compatible with Traxxas High Current Connector, NiMH only)   Only Traxxas Y-harnesses let you run dual-battery power for increased speed or runtime with the proven convenience and performance of genuine Traxxas High-Current Connectors. Choose the parallel harness to combine battery capacity for extra-long run time. Dual-battery operation requires attention to precautions outlined in the model's owners manual. Follow all precautions to assure peak performance and reliability of your model and batteries. Traxxas parallel and series Y-harnesses are for use with 2/3A battery packs only.

99,-

På lager 2
KJØP
Art.nr: TRX 3229
Copied
These are the stock replacement 2.5x10mm socket head screws used to attach the cylinder head to the Traxxas Image engine. Features: strong steel design Specifications: 2.5x10mm sockethead screw Includes: Six 2.5x10mm sockethead screws

35,-

På lager 4
KJØP
Art.nr: TRX 3236
Copied
Replacement CAP HEAD SCREWS are designed to be used with Traxxas products requiring this type/size screw. They will also work with other manufacturers products requiring this type/size screw. PACKAGE INCLUDES:    4-Cap-Head Machine Screws (steel) SPECS:    Size: 2.5x12mm COMMENTS:    HEADERCARD STATES (6) PER PACKAGE ***** PACKAGE CONTAINS ONLY (4) SCREWS

29,-

På lager 5
KJØP
Art.nr: TRX 3372
Copied
This is the Rebuild Kit for the Traxxas Velineon 380 Motor.   FEATURES Restores proper performance to worn Velineon motors   INCLUDES Two 4x9x4mm Ball Bearings  Two 2x6mm Countersunk Screws  Two Front Shims  Instruction Sheet

115,-

På lager 3
KJØP
Art.nr: TRX 3373
Copied
This is the Rotor for the Velineon 380 Motor From Traxxas.   FEATURES Precision balanced  Neodymium magnet   INCLUDES Rotor with Installation Instructions   REQUIREMENTS Disassembly of motor

459,-

På lager 2
KJØP
Art.nr: TRX 3375
Copied
This is the Velineon VXL3m Electronic Speed Control from Traxxas. FEATURES: Brushless control           11.1V 3S LiPo battery capability           Low voltage detection           2 stage thermal protection           Waterproof           Multi-color LED           EZ-Set push button setup INCLUDES: One VXL3m Electronic Speed Control REQUIRES: Installation on the vehicle SPECS:    Input Voltage: 6 to 12 cell NiMH, 2S to 3S LiPo           Motors: Sensorless Brushless           Motor Limit: None           Continuous Current: 52A           Peak Current: 326A           BEC Voltage: 6.0V DC           Transistor Type: MOSFET           On-Resistance: 0.0005 ohms           PWM Frequency: 12,000Hz           Motor Connectors: Traxxas 3.5mm bullet connectors           Motor/Battery Wiring: 16-Gauge           Thermal Protection: Two-Stage Thermal Shutdown           Weight: 38g (1.34oz)

1.495,-

1.595,-

På lager 1
KJØP
-6%
Art.nr: TRX 4725
Copied
This gear is a steel pinion gear in 48 pitch Features:  Brass pinion gear Includes:  1 gear and 1 set screw Specs:     Steel, 48 pitch, 25 tooth pinion gear.             Shaft length- 3/16"  Gear length- 1/4"  Overall length- 7/16"             Shaft diameter- 1/4"  Gear diameter- 1/2"             Mounting shaft (motor shaft) 1/8"

39,-

På lager 1
KJØP
Art.nr: TRX 4728
Copied
Passer på Traxxas 1/16 biler også.  This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas 4-Tec. FEATURES: Ideal replacement part for fine tuning your Traxxas 4-Tec 4WD remote             control sedan.           Metal construction INCLUDES: One Pinion Gear           One Set Screw SPECS:    Teeth: 28           Pitch: 48

39,-

På lager 1
KJØP
Art.nr: TRX 4915
Copied
       These are Foam Body Washers for the Traxxas T-Maxx                       4WD Radio Control Monster Truck.       These body washers adhere to the inside of the body over the body               mount holes and cushions the body from vibration. FEATURES: Replaces damaged or missing body washers.           Adhesive on one side allows easy attachment to body.           Made of shock absorbing foam that helps to prevent splitting of body             at mounting holes. INCLUDES: Ten foam body washers for the Traxxas T-Maxx. REQUIRES: Peeling off paper backing and attaching at mounting holes on body. SPECS:    Outer Diameter: 5/8" (16mm)           Inner Diameter: 1/4" (7mm) COMMENTS: May be used on any lexan car body.

25,-

På lager 4
KJØP
Art.nr: TRX 5123
Copied
   These are the BellCrank Bushings               for the Traxxas Nitro Jato Stadium Truck. FEATURES: Nylon construction           White in color INCLUDES: Four 4mm x 7mm x 2.5mm White Plastic Bushings REQUIRES: Assembly onto Vehicle

29,-

På lager 2
KJØP
Art.nr: TRX 5124
Copied
These are a pair of 4x7mm Rubber Sheilded Bearings                from Traxxas. FEATURES: Rubber shielded           Steel construction INCLUDES: Two rubber shielded bearings REQUIRES: Nothing SPECS:    Thickness: 2.6mm           Inner Diameter: 4mm           Outer Diameter: 7mm

55,-

På lager 1
KJØP
Art.nr: TRX 5130
Copied
Oil, differential (100K wt) (0.7 oz (20cc)) Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions, altering the limited slip capability can enhance turning performance for faster exit speeds. FEATURES: 100K weight oil INCLUDES: 0.7oz  (20cc) bottle of oil w/ 1-1/2" pointed fill cap

99,-

109,-

På lager 2
KJØP
-9%
Art.nr: TRX 5135
Copied
This is 10K wt Differential Oil for the Traxxas Revo                  but can be used in other vehicles as well. FEATURES: 10K wt oil INCLUDES: A 1.75 oz  (50cc) bottle of oil w/ 1-1/2" pointed fill cap

89,-

På lager 2
KJØP
Art.nr: TRX 5136
Copied
This is 30K wt Differential Oil for the Traxxas Revo                   but can be used in other vehicles as well. FEATURES: 30K wt oil INCLUDES: A 1.75 oz  (50cc) bottle of oil w/ 1-1/2" pointed fill cap

99,-

Ikke på lager
Ikke på lager
Art.nr: TRX 5137
Copied
This is 50K wt Differential Oil for the Traxxas Revo                   but can be used in other vehicles as well. FEATURES: 50K weight oil INCLUDES: 1.75 oz (50cc) bottle of oil w/ 1-1/2" (38mm) pointed fill cap

89,-

På lager 2
KJØP
Art.nr: TRX 6535
Copied
This is the Temperature Sensor Mount for the Traxxas TQi Telemetry System. FEATURES: For use with electric powered Traxxas vehicles INCLUDES: Mount, Plastic Tie, and Thermal Pad

39,-

49,-

På lager 5
KJØP
-20%
Art.nr: TRX 6540
Copied
This is the Telemetry Trigger Magnet for the Traxxas TQi Telemetry System. FEATURES: 5x2mm round magnet INCLUDES: Telemetry Trigger Magnet for the Traxxas TQi Telemetry System

25,-

På lager 1
KJØP
Art.nr: TRX 7015
Copied
These are the Front and Rear Body Mounts and Posts for use on the                     Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Front Body Mount           One Rear Body Mount           Two Front Body Posts           Two Rear Body Posts REQUIRES: Installation on the vehicle

79,-

På lager 3
KJØP
Art.nr: TRX 7019
Copied
These are the Rubber Sealed Ball Bearings for use on the               Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles. FEATURES: Blue rubber sealed           May also be used in any vehicle where this size bearing is required INCLUDES: Two Ball Bearings REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 8mm (0.31")           Inner Diameter: 4mm (0.16")           Width: 3mm (0.12")

49,-

På lager 1
KJØP
Art.nr: TRX 7020
Copied
These are the 8x12mm Blue Rubber Sealed Ball Bearings for use on the                  Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Ball bearings           Blue rubber sealed INCLUDES: Two Ball Bearings REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 12mm (0.47")           Inner Diameter: 8mm (0.31")           Width: 3.5mm (0.14")

49,-

På lager 4
KJØP
Art.nr: TRX 7021
Copied
This is the Suspension Pin Set for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Steel construction           Silver in color INCLUDES: Two 2x46mm Pins           Four 2x14mm Pins REQUIRES: Installation through suspension components

59,-

69,-

På lager 3
KJØP
-14%
Art.nr: TRX 7022
Copied
This is the Chassis for use on the                  Traxxas 1/16 E-Revo, Slash VXL and Rally VXL Vehicles. FEATURES: Nylon construction           Grey in color INCLUDES: One Chassis REQUIRES: Installation on vehicle SPECS:    Length: 245mm (9.6")           Width: 107mm (4.2")           Height: 40mm (1.6")

189,-

På lager 2
KJØP
Art.nr: TRX 7023
Copied
These are the Front and Rear Bulkhead Tie Bars for use on the               Traxxas 1/16 E-Revo ,Summit ,Rally and Slash VXL 4WD Vehicles. FEATURES: Aluminum construction           Blue in color INCLUDES: One Front Bulkhead Tie Bar           One Rear Bulkhead Tie Bar           One 2.5x6mm Cap Head Screw REQUIRES: Installation on the vehicle

69,-

På lager 3
KJØP
Art.nr: TRX 7024X
Copied
This is the Receiver Box for Traxxas 1/16 scale on-road vehicles. FEATURES Plastic construction Allows installation and removal of the receiver without losing the watertight seal Wire clamp system allows the use of aftermarket receivers while maintaining the watertight seal INCLUDES Box with Seal, tube of Grease, three Pads, Clamp and Mounting Screws REQUIREMENTS Installing receiver and fastening to chassis

129,-

På lager 2
KJØP
Art.nr: TRX 7025
Copied
This is the Seal Kit for the Traxxas 1/16 scale Receiver Box                     used in the 1/16 scale E-Revo, Summit, Rally and Slash. FEATURES: Prevents moisture and dirt from entering receiver box INCLUDES: Silicone O-ring           Silicone grease, TRX 1647           Two sections of foam rubber           Instruction sheet REQUIRES: Installation on receiver  

49,-

På lager 4
KJØP
Art.nr: TRX 7026
Copied
This is the Battery Compartment Door and Vents for use on                 the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Battery Compartment Door           Two Vents REQUIRES: Installation on the vehicle

59,-

På lager 3
KJØP
Art.nr: TRX 7028
Copied
These are the Hollow Balls for use on the                Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Twenty Hollow Balls REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 4.5mm (0.18")           Length: 5mm (0.20")

49,-

På lager 5
KJØP
Art.nr: TRX 7029X
Copied
This is the Rear Bulkhead for use on the                   Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction, black in color INCLUDES: Two Rear Bulkhead Sections           Four 3 x 10mm Button Head Screws           One 2.5 x 22mm  Socket Head Cap Screw REQUIRES: Installation on the vehicle

79,-

På lager 2
KJØP
Art.nr: TRX 7030X
Copied
This is the Front Bulkhead for use on the                  Traxxas 1/16 scale E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Two front bulkhead halves           Four 3x10mm Button Head Screws           One 2.5x23mm Cap Screw REQUIRES: Installation over front diff assembly  

79,-

På lager 3
KJØP
Art.nr: TRX 7033
Copied
These are the Pivot Balls and Pivot Ball Caps for use on the                  Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Steel constructed pivot balls           Black nylon pivot ball caps INCLUDES: Four Pivot Balls           Four Pivot Ball Caps REQUIRES: Installation on the vehicle's suspension

59,-

69,-

På lager 4
KJØP
-14%
Art.nr: TRX 7033X
Copied
These are the optional Pivot Ball Caps for use on the                  Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Hard anodized aluminum with Teflon coating           Replaces stock plastic pivot ball caps INCLUDES: Eight Pivot Ball Caps           5mm Hex Wrench           Instruction Sheet REQUIRES: Installation in hub carriers

259,-

299,-

Ikke på lager
Ikke på lager
-13%
Art.nr: TRX 7034
Copied
These are the Left and Right Axle Carriers for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Left Axle Carrier           One Right Axle Carrier REQUIRES: Installation on the vehicle

79,-

På lager 5
KJØP
Viser 1 til 50 (av 137 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png