Hopp til innhold

Traxxas 5135 Differential Oil 10K Weight Revo

Art.nr: TRX 5135

89,-

Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is 10K wt Differential Oil for the Traxxas Revo
                 but can be used in other vehicles as well.


FEATURES: 10K wt oil


INCLUDES: A 1.75 oz  (50cc) bottle of oil w/ 1-1/2" pointed fill cap

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 5136X
Copied
This is the Diff Oil Kit for the Revo by Traxxas. FEATURES: Three bottles of oil (10K,30K,50K weights). INCLUDES: Three 2oz (59ml) bottles of oil           Three pour spouts

249,-

KJØP

Kunder kjøpte også

Traxxas 7727A - Bulkhead rear upper & lower X-Maxx Fits X-Maxx only (not XRT)

239,-

269,-

KJØP
-11%
These are the Front and Rear Tie Bar Mountsfor the Traxxas X-Maxx Monster Truck. FEATURES One-piece molded composite plastic construction Installs between skid plate and lower bulkhead to help hold front and rear bulkhead assemblies in place INCLUDES Front and Rear Tie Bar Mounts

69,-

KJØP
SAVÖX SW-0250MG-PLUS - Water Proof Metal-Geared Mini Servo The SW-0250MG-PLUS is a waterproof, high torque, digital mini servo that performs! An excellent replacement for the standard servo found in Traxxas 1/16 scale vehicles. Features: New: Soft Start New: Sanwa SSR compatible Strong metal gear train for added durability Waterproof case design Ideal for cars and boats subject to water or snow Ideal for Traxxas 1/16 vehicles Specifications: Torque @4.8V: 3.5kg/cm Torque @6V: 5kg/cm Speed @4.8V: 0.14 sec/60 deg Speed @6V: 0.11 sec/60 deg Dimensions L x W x H: 29.5 x 14.0 x 32.5mm Weight: 25g Technical Details: Operating Temperature: -10° to 50°C Running Current (no load): 80mA @4.8V, 100mA @6.0V Stall Current (at locked): 1000mA @4.8V, 1250mA @6.0V Idle Current: 5mA @4.8V, 5mA @6.0V Wire Length: 200 ± 5mm Output Gear Spline: 21 Tooth Bearings: 1BB Operating Travel: 100° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 800 → 2200 µ second Maximum Travel: Appx 130° (900 → 2100 µ second) Refresh Rate: 240 Hz Motor Type: Brushed

495,-

KJØP
Disse lagerene er samme størrelse som Tamiya 850 This is a 2 pack of Traxxas 5X8mm Ball Bearings. FEATURES: Metal bearing construction           Blue rubber dirt shields INCLUDES: (2) 5X8mm ball bearings    Part #5114 SPECS:    Inside diameter:      3/16"    (5mm)           Outside diameter:     5/16"    (8mm)           Width:                3/32"  (2.5mm)

49,-

KJØP
These are the Rubber Sealed Ball Bearings for use on the               Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles. FEATURES: Blue rubber sealed           May also be used in any vehicle where this size bearing is required INCLUDES: Two Ball Bearings REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 8mm (0.31")           Inner Diameter: 4mm (0.16")           Width: 3mm (0.12")

49,-

KJØP
These are the 8x12mm Blue Rubber Sealed Ball Bearings for use on the                  Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Ball bearings           Blue rubber sealed INCLUDES: Two Ball Bearings REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 12mm (0.47")           Inner Diameter: 8mm (0.31")           Width: 3.5mm (0.14")

49,-

Ikke på lager
This is an optional Traxxas Extended Wheelbase Rear Suspension Arm Set, and is intended for use with the Traxxas 1/16 E-Revo. Add 10mm of wheelbase extension to 1/16 E-Revo in just minutes! Lengthening the wheelbase of your 1/16 E-Revo allows you to accelerate hard through the roughest track sections with increased stability and confidence. The longer wheelbase also helps keep the 1/16 E-Revo planted for holeshot launches and hold full-on power through the turns. Traxxas makes it easy by building the adjustment into the rear arms. Installation is a snap and the extended rear arms allow the wheelbase to be quickly tuned for various track conditions.

99,-

KJØP
        This is the optional 55T Spur Gear for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One 55T Spur Gear REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 30mm (1.2")           Inner Diameter: 5.5mm (0.22")           Width: 7.2mm (0.28")

39,-

KJØP
         This is the 45T Spur Gear for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One 45T Spur Gear REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 24.75mm (0.97")           Inner Diameter: 5.5mm (0.22")           Width: 7mm (0.28")

39,-

KJØP
This is the Progressive-2 Rocker Arm Post Set for use on the              Traxxas 1/16 scale E-Revo and Slash VXL 4WD Vehicles. FEATURES: Nylon construction           Grey in color INCLUDES: Two Rear Rocker Arm Posts           Two Front Rocker Arm Posts           Eight Nylon Bearings REQUIRES: Installation on the vehicle

65,-

Ikke på lager
Passer på Traxxas 1/16 biler også.  This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas 4-Tec. FEATURES: Ideal replacement part for fine tuning your Traxxas 4-Tec 4WD remote             control sedan.           Metal construction INCLUDES: One Pinion Gear           One Set Screw SPECS:    Teeth: 28           Pitch: 48

39,-

Ikke på lager
This is the Gear Cover/Motor Mount Hinge for use on the                  Traxxas 1/16 E-Revo, Summit, Rally and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Gear Cover/Motor Mount Hinge Post           One 3x8mm Cap Head Screw with Flat and Split Washers           One 3x8mm Button Head Screw REQUIRES: Installation on the vehicle

49,-

59,-

KJØP
-17%
Traxxas introduces a new heavy-duty center differential for 1/10 scale 4X4 trucks. Like the Torque-Biasing Center Drive found in the X-Maxx and E-Revo, the heavy-duty center differential replaces the stock slipper clutch to absorb shocks and improve driveline durability in high-power applications. The center differential distributes power to all four wheels for extreme 3-cell LiPo acceleration and consistent, hard launches. • Aluminum housing with hardened steel output gears • Steel spur gear • Replaces stock slipper clutch • Absorbs driveline shocks • Compatible with 3S LiPo power • Distributes power to all four wheels • Resists ballooning of unloaded wheels • Fits high or low-CG 1/10 chassis

859,-

899,-

KJØP
-4%
Carrier, differential (aluminum) (requires #7783X spider gear shaft)   Aluminum differential carrier for X-Maxx. Compatible with Torque-Biasing Center Drive™ and front and rear differentials. Requires #7783X spider gear shaft.

239,-

KJØP
Heavy duty steel 11-tooth pinion gear for X-Maxx front differential. For use with #7792 35-tooth heavy duty differential ring gear.

139,-

KJØP
Heavy duty steel 11-tooth pinion gear for X-Maxx rear differential. For use with #7792 35-tooth heavy duty differential ring gear.

109,-

119,-

KJØP
-8%
Ring gear, differential, 35-tooth (heavy duty) (use with #7790, #7791 11-tooth differential pinion gears)

139,-

159,-

KJØP
-13%
This is the Differential Gear Set  for the Traxxas X-Maxx Monster Truck     FEATURES Hardened steel construction   INCLUDES Two Output Gears  Four Spider Gears  Two Aluminum Spacers

229,-

KJØP
Husk at disse har 17mm hex. These are the Talon Tires mounted on Gemini Black Chrome Wheels                 for use on the Traxxas Maxx and Revo Vehicles.              Use with 17mm Splined Wheel Hubs and Nuts, TRX5353X FEATURES: Rubber construction           Talon tread           Black chrome nylon wheels           5-spoke design INCLUDES: Two Talon Tires premounted on Gemini Black Chrome Wheels REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 152mm (6")           Width: 85.75mm (3.4")           Hex: 17mm

499,-

KJØP
Disse lagerene er samme størrelse som Tamiya 850 Ball bearings, black rubber sealed (5x8x2.5mm) (2)

49,-

KJØP
Disse lagerene er samme størrelse som Tamiya 1150 This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo. FEATURES: Metal bearing construction           Blue rubber dirt shields INCLUDES: (2) 5X11mm ball bearings, Part #5116 SPECS:    Inside diameter:      3/16"      (5mm)           Outside diameter:     7/16"     (11mm)           Width:                5/32"      (4mm)

49,-

55,-

KJØP
-11%
This is the Traxxas Titan 550 12 Turn Electric Motor. FEATURES: Stock motor supplied with the Traxxas Stampede and Rustler series           Preinstalled leads, capacitors and connectors INCLUDES: Traxxas Titan 550 Motor, two capacitors and two leads with connectors REQUIRES: Installing in vehicle SPECS:    Can Diameter: 1.25" (38mm)           Shaft Diameter:  0.12" (3mm)           Length Including Shaft: 3.2" (81mm)           Length Not Including Shaft: 2.3" (57.5mm)           Specs such as RPM are not provided

329,-

369,-

KJØP
-11%
Traxxas 6786 - ­­4X4 Bearing Kit Restore your Traxxas model to peak performance with this bearing kit. The bearing kit swaps out the standard bearings with new factory-fresh replacements. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts. Not all bearings compatible with BL-2s models ­ 4X4 BEARING KIT FEATURES ­All-inclusive bearing kit Individual box compartments Handy label for identifying parts

369,-

399,-

KJØP
-8%
This is the Differential Ring and Pinion Gear for use on many Traxxas Vehicles. FEATURES: Steel construction INCLUDES: One Differential Ring Gear           One Differential Pinion Gear REQUIRES: Installation in differential assembly SPECS:    Pinion Gear:            Tooth: 13T            Inner Diameter: 5mm (0.20")           Ring Gear:            Tooth: 37T            Inner Diameter: 6mm (0.24")

199,-

KJØP
This is a 6 pack of Traxxas 2.5X8mm Cap Head Screws. FEATURES: Steel construction           Black in color           Cap head design INCLUDES: (6) 2.5X8mm cap head screws SPECS:    Length:         5/16"   (8mm)           Diameter:       3/32"   (2.5mm

35,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png