Traxxas

Traxxas 7045R Spur Gear 45T VXL

Art.nr: TRX 7045R

39,-

Traxxas

Traxxas

På lager: 3

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

This is the 45T Spur Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES: Nylon construction
Black in color

INCLUDES: One 45T Spur Gear

REQUIRES: Installation on the vehicle

SPECS:    Outer Diameter: 24.75mm (0.97")
          Inner Diameter: 5.5mm (0.22")
          Width: 7mm (0.28")

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 6842 Spur Gear 0.8 Metric Pitch 50T

Traxxas 6842 Spur Gear 0.8 Metric Pitch 50T

This is a Traxxas M0.8P, 50T Spur Gear. FEATURES: M0.8 pitch 50 tooth Black plastic construction Compatible with 32P pinion gears INCLUDES: One M0.8P, 50T Spur Gear SPECS: Pitch: M0.8 Tooth: 50 Outer Diameter: 41.5mm (1.63") Inner Diameter: 11mm (0.43")

39,-

Hovedbilde Traxxas 9052 Drive Shaft Complete Rear (for Upgrade ...

Traxxas 9052 Drive Shaft Complete Rear (for Upgrade ...

Driveshaft assembly, rear, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with #9080 upgrade kit) Replacement rear driveshaft for the Extreme Heavy Duty Upgrade Kit. Driveshafts are for use with the 9080 upgrade kit only and will not fit standard suspension parts. Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4

159,-

Hovedbilde Traxxas 4628R Differential Output Yokes Black (2)

Traxxas 4628R Differential Output Yokes Black (2)

These are the Differential Output Yokes for the Traxxas Bandit, Stampede and Rustler VXL. FEATURES: Black plastic construction INCLUDES: Two differntial output yokes Two 3x5mm countersunk screws Two screw pins REQUIRES: Installation SPECS: Length: .70" (18mm) Diameter: .51" (13mm)

59,-

Hovedbilde Traxxas 2479A Tires & Wheels Assembled Bandit Front ...

Traxxas 2479A Tires & Wheels Assembled Bandit Front ...

This is the Front Tire set for the Traxxas Bandit. FEATURES: Rubber Anaconda tires Split X-Pattern tread Foam inserts INCLUDES: Two Tracer 2.2" black chrome wheels with Anaconda 2.2" tires REQUIRES: Installation on the Bandit SPECS: Overall Diameter: 3.30" (84mm) Width: 1.10" (28mm)

279,-

299,-

-7%

Hovedbilde Traxxas 2478A Tires & Wheels Assembled Bandit Rear (2)

Traxxas 2478A Tires & Wheels Assembled Bandit Rear (2)

This is the Rear Tire set for the Traxxas Bandit vehicle FEATURES: Rubber Anaconda tires Split X-Pattern tread Foam inserts INCLUDES: Two Tracer 2.2" black chrome wheels with Anaconda 2.2" tires REQUIRES: Installation on the Bandit SPECS: Overall Diameter: 3.54" (90mm) Width: 1.69" (43mm)

339,-

369,-

-8%

Hovedbilde

"Bulk" Traxxas 3722A Lower Chassis Gray

*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 3722A Lower Chassis Gray This is a Grey Lower Chassis for the Traxxas Electric Rustler Series and Bandit. FEATURES: Constructed of composite plastic INCLUDES: One Traxxas Grey Lower Chassis REQUIRES: Installing all components onto chassis SPECS: Length: 13.5" (343mm) Width: 5.3" (135mm) Thickness: 0.08" (2mm)

179,-

Hovedbilde Traxxas 5042 Oil Differential 1M Weight

Traxxas 5042 Oil Differential 1M Weight

Oil, differential (1.000.000 weight) (Typically used for center differential)

149,-

Hovedbilde Traxxas 5040 Oil Differential 20m Weight

Traxxas 5040 Oil Differential 20m Weight

Oil Differential 20m Weight

179,-

Hovedbilde Traxxas 5037 Silicon Shock Oil Premium 80WT (1000cSt) ...

Hovedbilde Traxxas 5037 Silicon Shock Oil Premium 80WT (1000cSt) ...

Traxxas 5037 Silicon Shock Oil Premium 80WT (1000cSt) ...

Traxxas 80WT/1000cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, the twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 80WT (1000cSt) Bottle size: 60ml

99,-

109,-

-9%

Hovedbilde Traxxas 5135 Differential Oil 10K Weight Revo

Traxxas 5135 Differential Oil 10K Weight Revo

This is 10K wt Differential Oil for the Traxxas Revo but can be used in other vehicles as well. FEATURES: 10K wt oil INCLUDES: A 1.75 oz (50cc) bottle of oil w/ 1-1/2" pointed fill cap

89,-

Hovedbilde Traxxas 2072X Gear Set 2070 & 2075 Servos

Hovedbilde Traxxas 2072X Gear Set 2070 & 2075 Servos

Traxxas 2072X Gear Set 2070 & 2075 Servos

Gear set, metal (for 2070, 2075 servos) Developed for the TRX-4 RC Scale and Trail Crawler, the #2075X steering servo features all-metal gears for rugged, dependable service in extreme conditions. These same gears are now available to upgrade standard #2075 servos to the metal gear set. Upgrade your existing Slash, Summit, 4-Tec 2.0, E-Revo, or E-Maxx steering servos with this high-performance gear set. Replacing your #2075 servo gears is easier than ever with this all-inclusive kit. Installation should take about 15 minutes with only simple tools required. The included instruction sheet illustrates how the servo is constructed while the helpful installation video walks you through the process.

249,-

Hovedbilde Traxxas 7033X Aluminum Heavy Duty Pivot Balls (8)

Traxxas 7033X Aluminum Heavy Duty Pivot Balls (8)

These are the optional Pivot Ball Caps for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Hard anodized aluminum with Teflon coating Replaces stock plastic pivot ball caps INCLUDES: Eight Pivot Ball Caps 5mm Hex Wrench Instruction Sheet REQUIRES: Installation in hub carriers

259,-

299,-

-13%

Hovedbilde Traxxas 7028X Hollow Balls Steel Machined

Traxxas 7028X Hollow Balls Steel Machined

These are the Machined Steel Hollow Balls from Traxxas. FEATURES: Steel construction Silver in color INCLUDES: Twenty Two Hollow Balls SPECS: Length: 5mm (0.20") Outer Diameter: 4.5mm (0.18") Inner Diameter: 2.5mm (0.1")

99,-

Hovedbilde Traxxas 7154X Aluminum Wheel Hubs Hex Anodized Blue ...

Traxxas 7154X Aluminum Wheel Hubs Hex Anodized Blue ...

These are the Aluminum Hex Wheel Hubs from Traxxas. FEATURES: Aluminun construction Blue in color INCLUDES: Four Hex Wheel Hubs REQUIRES: Installation on the vehicle SPECS: Hex Size: 12mm Thickness: 4.2mm (0.17")

219,-

Hovedbilde Traxxas 7132 Suspension Arm Set Rear VXL

Traxxas 7132 Suspension Arm Set Rear VXL

This is the Rear Suspension Arm Set for use on the Traxxas 1/16 E-Revo VXL 4WD RTR FEATURES: Nylon construction Black in color INCLUDES: One Lower Right Suspension Arm One Lower Left Suspension Arm Two Rear Lower Left/Right Suspension Arms

99,-

Hovedbilde Traxxas 3932 Flat Head Machine Hex Drive Screws 3x6mm ...

Traxxas 3932 Flat Head Machine Hex Drive Screws 3x6mm ...

These are the 3x6mm Flathead Machine Screws used on the Traxxas T-Maxx 3.3 RTR. FEATURES: Constructed of steel, black in color INCLUDES: Six 3x6mm Flathead Machine Screws REQUIRES: 2.5mm hex wrench. SPECS: Length: 6mm Diameter: 3mm COMMENTS: Can be used in any application where a screw of this size is needed.

35,-

Hovedbilde Traxxas 3931 Flat Head Machine Hex Drive Screws 3x8mm ...

Traxxas 3931 Flat Head Machine Hex Drive Screws 3x8mm ...

These are the Traxxas Flathead 3 x 8mm Screws. FEATURES: Metal construction Black in color INCLUDES: Six 3 x 8mm Flathead Hex Screws REQUIRES: Installation on the vehicle

35,-

Hovedbilde Traxxas 3352R Rebuild Kit Velineon 3500

Traxxas 3352R Rebuild Kit Velineon 3500

This is the Rebuild Kit for the Traxxas Velineon 3500 Brushless motor - TRX 3351 FEATURES: Improves performance of an old motor Step-by-step instruction sheet guides you through the process INCLUDES: Two 5 x 11 x 4mm Bearings One 5 x 7 x 13mm Brass Bushing One 5 x 7 x 5.6mm Brass Bushing Four 2.5 x 5mm Button Head Screws (1.5mm hex size) REQUIRES: Removal of old parts and installation of new parts following the included instruction sheet COMMENTS: For the replacement motor rotor order TRX 3353 For the replacement motor cover endbell order TRX 3354 020334335203

149,-

Hovedbilde Traxxas 3743 Steering Bellcrank

Traxxas 3743 Steering Bellcrank

These are Steering Bellcranks and Draglinks for the Traxxas Rustler and Stampede. FEATURES: White Plastic Construction INCLUDES: One Bellcrank One Link One Arm REQUIRES: Rustler of Stampede COMMENTS: None

49,-

Hovedbilde Traxxas 2514 Sponsor Decal Sheet

Traxxas 2514 Sponsor Decal Sheet

This is a Sponsor Decal Set for R/C Cars from Traxxas. FEATURES: These decals are designed to be used on any scale lexan R/C car and truck bodies. Pressure sensitive, peel and stick vinyl decals. These are the contingency/sponsorship decals that are used on race cars. Logos include: Traxxas, Lunati Cams, Hedman Hedders, Simpson, MSD, Mr. Gasket, NOS, Accel, Hurst, and more. Multi-purpose decal set is appropriate for any type of car. INCLUDES: One Sponsor Decal Set. SPECS: Length: 9-1/8" (23.2cm) Width: 5-1/8" (13.0cm)

59,-

Hovedbilde Traxxas 7250R Driveshafts Center Front/Rear 1/16 ...

Traxxas 7250R Driveshafts Center Front/Rear 1/16 ...

These are the optional Steel Driveshafts for the Traxxas Summit VXL and all Traxxas 1/16 cars. FEATURES: Hardened steel construction INCLUDES: Center, Front and Rear Driveshafts

399,-

429,-

-7%

Hovedbilde RPM 73169 Axle Carriers Red 1/16 Revo/Slash

RPM 73169 Axle Carriers Red 1/16 Revo/Slash

1/16th Scale Axle Carriers for the Traxxas e-Revo, Slash, Summit & Rally Quick Notes: – fits all versions of the 1:16 scale Slash and Revo – replaces stock Traxxas #7034 – sold in pairs (two sets will be needed to complete one full vehicle) – requires a 0.05″ or 1.25mm hex wrench (not included) for installation. Description There is very little that can be as frustrating on an R/C vehicle as slop in the suspension system. In the case of the 1/16th scale mini E-Revo and mini Slash, there is absolutely no slop adjustment for the suspension pivot balls. Once the axle carriers begin to wear at those balls, the camber, toe and caster angles don’t stay true, causing the vehicle to wander, making it very difficult to control. That is where RPM steps in. Our new 1/16th scale mini E-Revo and mini Slash Axle Carriers have a unique pivot ball retention system that locks the pivot ball in place, yet still allows for adjustment due to wear. Our system is based on a cap design, held in place with a pair of small screws. Simply slip the caps in place, tighten the flathead screws until the free play of the pivot ball is eliminated and you’re ready to go! RPM Axle Carriers have been completely redesigned for added durability and crash-survivability. RPM engineers found that the stock pivot ball opening could be reduced in size to help support the pivot ball better, meaning a significantly lower chance of pulling the ball through the hole. The redesigned overall shape and superior materials that go into our version make them the best alternative at the lowest price available! And to top it off, RPM axle carriers are marginally lighter than the stock versions! RPM Axle Carriers for the 1/16th scale Traxxas mini E-Revo and mini Slash are molded in four color options – black, green, blue and red, perfectly matching our already well-known and respected set of mini E-Revo A-arms. Designed, manufactured and molded right here in our facility in sunny Southern California!

169,-

Hovedbilde RPM 80694 Suspension Arms Front Green (2+2) 1/16 ...

Hovedbilde RPM 80694 Suspension Arms Front Green (2+2) 1/16 ...

RPM 80694 Suspension Arms Front Green (2+2) 1/16 ...

Suspension Arms Front Green (2+2) 1/16 E-Revo replaces TRX 7131 Quick Notes: – replaces stock Traxxas #7131 – matching Rear A-arms available – matching Axle Carriers available Upon the release of the Traxxas 1/16th Scale Mini E-Revo, we immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With our guaranteed unbreakable material and a proven A-arm design based off of our larger, 1/10th scale Revo A-arms, durability for these little monsters has arrived! A siginificant problem we have been able to eliminate was slop in the suspension system. In some cases, we found as much as 1/32” of slop in the stock A-arms! That has been remedied with these new RPM versions. Our A-arms eliminate nearly all of the A-arm slop, which allows camber, caster and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent steering and suspension system with a significantly reduced tendency for the truck to randomly wander while driving. Unique to RPM suspension arms is our angled leading and trailing edges. We incorporate a 30-degree bevel in these areas, which reduces the chance of breaking suspension parts since the A-arm will naturally try to transition over objects instead of bluntly plowing into them. RPM front A-arms for the Traxxas Mini E-Revo are sold in sets of four – both upper and both lower a-arms.

199,-

Hovedbilde RPM 80604 Rear Upper/Lower A-Arms Green Traxxas Mini ...

Hovedbilde RPM 80604 Rear Upper/Lower A-Arms Green Traxxas Mini ...

RPM 80604 Rear Upper/Lower A-Arms Green Traxxas Mini ...

RPM Rear A-arms for 1/16 E-Revo - Green Replaces stock Traxxas #7132 Quick Notes: Replaces stock Traxxas #7132 Matching Front A-arms available Matching Axle Carriers available Similar to RPM front A-arms, our rear arms eliminate nearly all of the A-arm slop typically found in stock Mini E-Revo rear A-arms, allowing camber and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent suspension system with a significantly reduced tendency for the truck to randomly wander while driving. RPM rear suspension arms match the same design elements as our fronts using angled leading and trailing edges. By incorporating a 30-degree bevel in these areas, we reduce the chance of breaking suspension parts since the A-arms will naturally try to transition over objects instead of bluntly plowing into them. RPM Mini E-Revo rear A-arms are sold in sets of four – both upper and both lower A-arms. These miniature E-Revo A-arms, like all RPM molded products.

165,-

Hovedbilde Traxxas 8218 Floor Pans Left and Right TRX-4

Traxxas 8218 Floor Pans Left and Right TRX-4

Floor pans, left & right

99,-