Hopp til innhold
-17%

Traxxas 7077R Cover Gear/Motor Mount Hinge Post VXL

Art.nr: TRX 7077R

49,-

59,-

- 17%
Traxxas

Traxxas

På lager: 5

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Gear Cover/Motor Mount Hinge for use on the
                 Traxxas 1/16 E-Revo, Summit, Rally and Slash VXL Vehicles.


FEATURES: Nylon construction
          Black in color


INCLUDES: One Gear Cover/Motor Mount Hinge Post
          One 3x8mm Cap Head Screw with Flat and Split Washers
          One 3x8mm Button Head Screw


REQUIRES: Installation on the vehicle

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

This is a 3x6mm Countersunk Machine Screw Set from Traxxas FEATURES: Steel construction INCLUDES: (6) 3x6mm screws

35,-

KJØP
         These are 3x8mm Countersunk Hex Head Screws by Traxxas.               Can be used anywhere this type of screw is needed. FEATURES: Metal Construction           Black in Color           Countersunk INCLUDES: (6) Screws SPECS:    Length:   8mm           Diameter: 3mm

35,-

KJØP
This is the Long RPM Sensor for the                    XO-1 On-Road Car from Traxxas. FEATURES: Functions with the Traxxas Link system to display motor RPM INCLUDES: Long RPM Sensor with Zip Tie and 3x4mm Button Head Cap Screws PECS:    Length: 15" (381mm)  

139,-

KJØP
        This is the optional 55T Spur Gear for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One 55T Spur Gear REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 30mm (1.2")           Inner Diameter: 5.5mm (0.22")           Width: 7.2mm (0.28")

39,-

KJØP
This is the Progressive-2 Rocker Arm Post Set for use on the              Traxxas 1/16 scale E-Revo and Slash VXL 4WD Vehicles. FEATURES: Nylon construction           Grey in color INCLUDES: Two Rear Rocker Arm Posts           Two Front Rocker Arm Posts           Eight Nylon Bearings REQUIRES: Installation on the vehicle

65,-

Ikke på lager
Passer på Traxxas 1/16 biler også.  This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas 4-Tec. FEATURES: Ideal replacement part for fine tuning your Traxxas 4-Tec 4WD remote             control sedan.           Metal construction INCLUDES: One Pinion Gear           One Set Screw SPECS:    Teeth: 28           Pitch: 48

39,-

Ikke på lager
This is 10K wt Differential Oil for the Traxxas Revo                  but can be used in other vehicles as well. FEATURES: 10K wt oil INCLUDES: A 1.75 oz  (50cc) bottle of oil w/ 1-1/2" pointed fill cap

89,-

KJØP
Traxxas 7095 - Pro-Built 1/16 Brushed Transmission Transmission, complete (fits 1/16-scale brushed models) As you probably know, Traxxas makes high-quality replacement parts for every vehicle that we sell. This makes it easy to keep your model running in peak form. For even faster, more convenient repairs and maintenance, Traxxas now offers Pro-BUILT™ components for the best-selling 2WD and 4X4 models, including E-Revo, Bandit, Rustler, Stampede, Slash, and Unlimited Desert Racer. Pro-BUILT components allow you to replace your model’s differential or transmission as a complete unit, no assembly required. Each Pro-BUILT component arrives ready-to-install, precisely assembled to Traxxas’ exacting standards and lubricated with factory-certified grease or oil. Pro-BUILT components save time and make it easy to restore like-new performance with factory-fresh parts in the driveline, where precision counts most. Pro-BUILT components ensure your model delivers all the performance, durability, and fun you expect from Traxxas. Fits: 1/16 E-Revo® (Brushed) 1/16 Slash 4WD (Brushed)

559,-

KJØP
These are the Front and Rear Body Mounts for the                   Traxxas 1/16 scale Rally Racer. FEATURES: Plastic construction INCLUDES: One-piece Rear and two-piece Front Body Mounts REQUIRES: Fastening to chassis and installing body

59,-

69,-

KJØP
-14%
This is the Front Bumper and Mount for the Traxxas 1/16 scale Rally VXL. FEATURES: Black plastic construction INCLUDES: 1 Mount and 1 Bumper REQUIRES: Installation onto the 1/16 Rally chassis

89,-

99,-

KJØP
-10%
These are the Aluminum Hex Wheel Hubs from Traxxas. FEATURES: Aluminun construction           Blue in color INCLUDES: Four Hex Wheel Hubs REQUIRES: Installation on the vehicle SPECS:    Hex Size: 12mm           Thickness: 4.2mm (0.17")  

219,-

KJØP
        This is the optional 50T Spur Gear for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One 50T Spur Gear REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 27.4mm (1.1")           Inner Diameter: 5.5mm (0.22")

39,-

KJØP
Spring, shock (GTR) (2.925 rate, blue) (1 pair)

49,-

KJØP
This is the Front Bulkhead for use on the                  Traxxas 1/16 scale E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Two front bulkhead halves           Four 3x10mm Button Head Screws           One 2.5x23mm Cap Screw REQUIRES: Installation over front diff assembly  

79,-

KJØP
RPM Front A-arms for 1/16 E-Revo - Black Replaces stock Traxxas #7131 Quick Notes: Replaces stock Traxxas #7131 Matching Rear A-arms are available Matching Axle Carriers are available Upon the release of the Traxxas 1/16th E-Revo, we immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With our guaranteed unbreakable material and a proven A-arm design based off of our larger, 1/10th scale Revo A-arms, durability for these little monsters has arrived! A significant problem we have been able to eliminate was slop in the suspension system. In some cases, we found as much as 1/32” of slop in the stock A-arms! That has been remedied with these new RPM versions. Our A-arms eliminate nearly all of the A-arm slop, which allows camber, caster and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent steering and suspension system with a significantly reduced tendency for the truck to randomly wander while driving. Unique to RPM suspension arms is our angled leading and trailing edges. We incorporate a 30-degree bevel in these areas, which reduces the chance of breaking suspension parts since the A-arm will naturally try to transition over objects instead of bluntly plowing into them.   RPM front A-arms for the Traxxas 1/16 E-Revo are sold in sets of four – both upper and both lower a-arms

199,-

KJØP
This is the Rear Bulkhead for use on the                   Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction, black in color INCLUDES: Two Rear Bulkhead Sections           Four 3 x 10mm Button Head Screws           One 2.5 x 22mm  Socket Head Cap Screw REQUIRES: Installation on the vehicle

79,-

KJØP
This is the Diff Shim Set for the Associated 18T. FEATURES: Steel construction INCLUDES: Four shims and instruction sheet REQUIRES: Installing on differential shaft SPECS:    Diameter: inner 8mm, outer 10mm

79,-

89,-

Ikke på lager
-11%
Front Bumper for the Traxxas 1/16th Scale Mini E-Revo Quick Info – replaces stock Traxxas #713 – matching Rear Bumper also availabl Description At just over 2” wide, stock 1/16th scale Traxxas Mini E-Revo bumpers just aren’t large enough to provide any protection to the front or rear end of these cool little trucks. RPM has that problem solved with our new bumpers that measure in at a full 4” wide, almost double the width of the stock bumpers! Now that’s some serious protection. We also decided to go with a more scale look with a twin tube bumper design. Both front and rear bumpers have this new design while the front bumper also integrates an upper protective loop, indicative of a scale front bumper while also providing additional body protection on roll-overs. RPM bumpers for the 1/16th scale Mini E-Revo are molded from RPM materials, which means you know they’re tough! We also mold them in three color options – black, blue and red, matching our A-arms presently available for these mean little trucks while blending perfectly with any stock or aftermarket paint scheme. Affordable… Lightweight… Rugged… Great looking… What more can anyone ask for?  

139,-

KJØP
Traxxas 80WT/1000cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, the twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 80WT (1000cSt) Bottle size: 60ml

99,-

109,-

KJØP
-9%
This is the Rebuild Kit for the Traxxas Velineon 380 Motor.   FEATURES Restores proper performance to worn Velineon motors   INCLUDES Two 4x9x4mm Ball Bearings  Two 2x6mm Countersunk Screws  Two Front Shims  Instruction Sheet

115,-

KJØP
Yeah Racing RC PTFE Bearing (4x7x2.5mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6008BS/10) RC Telfon Bearing (4x7x2.5mm)/li> Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation:     High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

69,-

KJØP
Traxxas 70WT/900cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, the twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 70WT (900cSt) Bottle size: 60ml

99,-

109,-

KJØP
-9%
Spring, shock (GTR) (3.2 rate, purple) (1/16 Summit) (1 pair)

49,-

KJØP
   These rubber cap diaphragms for Traxxas plastic shocks, also work well with Associated aluminum shocks. Qty-4

29,-

KJØP
These are replacement slipper friction pegs for all of the TRAXXAS kits that have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, etc... FEATURES: Made of RULON INCLUDES: Twelve pegs SPECS:    length - 3.5mm           diameter - 3mm COMMENTS: These pegs go in the holes on the side of the spur gear.

55,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png