Hopp til innhold

Traxxas 2081 Servo Case/Gaskets for 2080 VXL Servo

Art.nr: TRX 2081

79,-

Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Servo Case with Gaskets for the
              Traxxas VXL Micro Waterproof Servo TRX 2081.


FEATURES: Nylon construction
          Blue in color


INCLUDES: One Servo Case (Top, Middle, and Bottom Sections)
          Five Gaskets
          Instruction sheet


REQUIRES: Installing remaining servo components

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

This is the Rear Suspension Arm Set for use on the                 Traxxas 1/16 E-Revo VXL 4WD RTR FEATURES: Nylon construction           Black in color INCLUDES: One Lower Right Suspension Arm           One Lower Left Suspension Arm           Two Rear Lower Left/Right Suspension Arms

99,-

KJØP
This is the Front Suspension Arm Set for use on the                 Traxxas 1/16 E-Revo VXL 4WD RTR. FEATURES: Nylon construction           Black in color INCLUDES: One Upper Right Suspension Arm           One Lower Right Suspension Arm           One Upper Left Suspension Arm           One Upper Right Suspension Arm REQUIRES: Installation on the vehicle

109,-

119,-

KJØP
-8%
These are the Left and Right Axle Carriers for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Left Axle Carrier           One Right Axle Carrier REQUIRES: Installation on the vehicle

79,-

KJØP
These are the Pivot Balls and Pivot Ball Caps for use on the                  Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Steel constructed pivot balls           Black nylon pivot ball caps INCLUDES: Four Pivot Balls           Four Pivot Ball Caps REQUIRES: Installation on the vehicle's suspension

59,-

69,-

KJØP
-14%
This is the Wheelie Bar for the Traxxas 1/16 scale E-Revo. FEATURES: Nylon construction           Black in color INCLUDES: One Wheelie Bar           One 2,5x14mm Cap Head Screws           Three 2,5x8mm Cap Head Screws           Instruction Sheet REQUIRES: Installation at rear of chassis

199,-

KJØP
These are the Pushrods and Hollow Balls for use on the                  Traxxas 1/16 E-Revo, Slash, Summit and Rally VXL 4WD RTR. FEATURES: Molded composite construction           Red in color INCLUDES: Four Pushrods           Eight Hollow Balls REQUIRES: Installation on the vehicle SPECS:    Length: 70mm (2.8")           Diameter: 5mm (0.20")

75,-

KJØP
This is the Suspension Pin Set for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Steel construction           Silver in color INCLUDES: Two 2x46mm Pins           Four 2x14mm Pins REQUIRES: Installation through suspension components

59,-

69,-

KJØP
-14%
These are the Front and Rear Toe Links for use on the                Traxxas 1/16 E-Revo VXL 4WD RTR. FEATURES: Nylon construction           Red in color INCLUDES: Four Front/Rear Toe Links           Eight Hollow Balls REQUIRES: Installation on the vehicle SPECS:    Length: 86mm (3.4")           Diameter: 5mm (0.20")

75,-

KJØP
Body Clips Standard Black (12)

29,-

39,-

KJØP
-26%
Silicon Shock Oil Premium 50WT (600cSt) 60ml

99,-

109,-

KJØP
-9%
These are the Differential and Transmission Yokes for              use on the Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Two Yokes           Two 3x10mm Screw Pins REQUIRES: Installation on the vehicle

39,-

KJØP
Traxxas 2082R Gear set, metal (for 2080R waterproof micro servo) Replacement metal gear set for 2080R servo. This gear set may be used to upgrade a 2080A servo (must replace all gears). Accessory part for these models: 1/16 E-Revo® VXL 1/16 E-Revo® 1/16 Slash 4WD 1/16 Slash® 4X4 1/16 Summit™

229,-

249,-

KJØP
-8%
This is the Steering Arm for use on the                   Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Upper and Lower Steering Arm           Steering Link           Servo Horn           Servo Saver           Servo Saver Spring           Servo Horn Mount           Two Ball Studs           Front and Rear Shock Mounts           Four 2.5x18mm Cap Head Screws REQUIRES: Installation on the vehicle

149,-

Ikke på lager
This is a pair of Pro-Line Slingshot 2.2 Sand Tires mounted to Desperado Wheels for the Traxxas 1/16 scale E-Revo. FEATURES Fits the front and rear of the 1/16 scale Traxxas E-Revo Scale 12 paddle design with low roll outer sidewalls One-piece nylon wheels feature wider offset for greater stability during bumps and jumps INCLUDES Two Slingshot 2.2 Sand Tires with Foam Inserts mounted to Six-Spoke Desperado Wheels in Black SPECIFICATIONS Width: 1.68" (43mm) Diameter: 3.85" (98mm) Hex Size: 12mm

479,-

529,-

KJØP
-9%
This is the Servo Gear Set for use on the                Traxxas VXL Micro Waterproof Servo TRX 2080. FEATURES: Nylon construction           Grey in color INCLUDES: One Output Gear           One Top Reduction Gear           One Center Reduction Gear           One Bottom Reduction Gear           Instruction sheet REQUIRES: Installation on the servo

59,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png