Hopp til innhold

Zap PT19 Adhesives Plastic Zap CA 1/3 oz

Art.nr: PT-19

69,-

Zap

Zap

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

 This is a 1/3oz Bottle of Plasti-Zap CA Glue from Pacer.

FEATURES: Medium viscosity formula.
          Cures clean and clear.
          Will not attack paint.
          Works on most plastics and vinyl.
          Non-flammable and non-sniffable.
          Permits rapid kit assembly in seconds.

INCLUDES: One 1/3oz Bottle of Plasti-Zap CA Glue.

SPECS:    1/3oz (9.47g)

Produsent

Kunder kjøpte også

 This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin,             styrofoam and wood.           Excellent for either brush or spray painting.           Covers well, flows smoothly with no blushing or fading, and can be             blended easily.           Jar will accept standard airbrush lid.           Can be washed away with plain water if done prior to curing.           Available in 19 glossy, 45 flat and 7 translucent colors plus an             exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Light Green paint. REQUIRES: Paint Brush or Airbrush to apply to model.           Eye, Lung and Skin protection.           Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children.           Highly Flammable Paint.           For Adult Modelers Only.

30,-

KJØP
Aircraft Telemetry Flight Pack Voltage Sensor-2pin

129,-

KJØP
This is an optional Wheelie Bar Mount for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, black in color           Installs at rear of chassis to hold wheelie bar arm and wheels in             place INCLUDES: Assembled optional Wheelie Bar Mount with mounting instructions and             hardware REQUIRES: Wheelie Bar Arm                   Wheels and Axles

49,-

KJØP
       This is a pair of Front Shredder Tires from                    Traxxas for use with the Jato. FEATURES: Angled rib design, with two ribs to the left and right of center           2.8" tire INCLUDES: Two Shredder front 2.8" tires           Two foam inserts REQUIRES: Jato wheels           Tire glue SPECS:    Width: 2" (50mm)           Inner Diameter: 2.8"(71.12mm)           Outer Diameter: 3.6" (92mm) COMMENTS: The Traxxas Jato can also use standard 2.2" truck wheels and tires.

249,-

KONTAKT
Zap PT21 Flexi Tips (24)

59,-

KJØP
Dette er en presisjons sidekutter for å fjerne deler fra støpe-treet – altså fra plast brettet – uten å skade dem. Den slagfaste kromvanadiske legeringen er utviklet eksklusivt for plastmodellering og er valgt for lang levetid. Høykvalitets vinylbelegg sikrer godt grep. Dette er ett MUST for modellbyggeren. Denne må du ha for å lykkes med ditt plast sett.

399,-

449,-

KJØP
-11%
 This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.         INCLUDES: One 100ml Spray Can of Synthetic Lacquer Brilliant Blue Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.             Keep out of the reach of children.

109,-

KJØP
Speed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm, 2.5mm, 3.0mm), 1/4" drive

469,-

549,-

KJØP
-15%
Traxxas 8714 Speed Bit Set, screwdriver, 3-piece straight (3mm slotted, #1 Phillips, and #2 Phillips bits), 1/4" drive   New Phillips and Straight screwdriver bits are precision-ground from the same premium hardened tool steel as Traxxas hex speed bits to provide years of pro-level service.

349,-

399,-

KJØP
-13%
   This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin,             styrofoam and wood.           Excellent for either brush or spray painting.           Covers well, flows smoothly with no blushing or fading, and can be             blended easily.           Jar will accept standard airbrush lid.           Can be washed away with plain water if done prior to curing.           Available in 19 glossy, 45 flat and 7 translucent colors plus an             exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Lemon Yellow paint. REQUIRES: Paint Brush or Airbrush to apply to model.           Eye, Lung and Skin protection.           Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children.           Highly Flammable Paint.           For Adult Modelers Only.

30,-

KJØP
 This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin,             styrofoam and wood.           Excellent for either brush or spray painting.           Covers well, flows smoothly with no blushing or fading, and can be             blended easily.           Jar will accept standard airbrush lid.           Can be washed away with plain water if done prior to curing.           Available in 19 glossy, 45 flat and 7 translucent colors plus an             exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Flat Flesh paint. REQUIRES: Paint Brush or Airbrush to apply to model.           Eye, Lung and Skin protection.           Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children.           Highly Flammable Paint.           For Adult Modelers Only.

35,-

KJØP
Fra produsenten: Length: 302mm. Image shows assembled and painted kit. The True Successor to the Mk.V The legendary Spitfire was the representative British fighter of WWII. Many variants were built and among these was the Mk.VIII, a variant developed to be the replacement for the RAF’s previous mainstay Spitfire, the Mk.V. The Mk.VIII was fitted with a Rolls-Royce Merlin 60-series engine, larger radiators, and an air filter as standard. Other improvements included fuel tanks added in the wings, retractable tail wheel, shortened ailerons, and enlarged rudder and elevators. From the latter half of 1943, the Mk.VIII were deployed to the Mediterranean and Pacific Theaters and saw service with RAF, USAAF, RCAF, and RAAF units.   About the Model 1/32 scale plastic assembly kit of the Spitfire Mk.VIII. ★Overall Length: 302mm, Overall Width: 383mm. ★Features of the Mk.VIII, including the retractable tail wheel, shortened ailerons, and wing fuel tanks, have all been accurately reproduced. ★You can select either retracted or deployed landing gear and tail wheel even after assembly. ★Parts to depict standard and extended wingtips included ★Features moveable ailerons, rudder, and elevators. Flaps can be depicted in either up or down position. ★Parts for 30 and 90 gallon fuel tanks included. ★Comes with 3 kinds of markings to depict the aircraft from USAAF, RAAF, and RCAF units. ★Comes with 2 pilot figures, 1 seated and 1 standing.   Packaging   ■Built-in magnets enable cowling detachment even after assembly. The form of the nose section has been accurately reproduced.   ■Kit includes parts to depict wingtips of early-type Mk.VIII. Also features shortened ailerons.   ■Features of the Mk.VIII, including details for the wing fuel tanks, have been faithfully reproduced.   ■Parts to depict the 90 gallon fuel tank seen in the Pacific Theater are also included.   ■You can select either stowed or deployed tail wheel even after assembly.   ■Rolls-Royce Merlin engine features impressive details including carburetor, supercharger, and intercooler.     ■Structurally complicated cockpit has exquisite details such as floor-less construction and the unique control stick.   ■Bulletproof plate and seat harnesses are depicted with photo-etched parts for greater realism. Masks to aid with canopy painting are also included.   ■Included stand enables to depict the plane in flight. You can select either stowed or deployed landing gear even after assembly.     Special Photographic Reference Manual Included In addition to the historical background of the Spitfire, this booklet includes photographs taken at museums where research on actual Spitfire aircraft was conducted. A5 size, 16 pages.   Lt. Bill Skinner, 308th Fighter Squadron, 31st Fighter Group, 15th Air Force, USAAF, Castel Volturno, Italy, February 1944   Wing Commander “Bobby” Gibbes, No.80 Wing, RAAF, Morotai Island, Dutch East Indies, 1945   No.417 Squadron, RCAF, Marcianise, Italy, January 1944

1.695,-

1.895,-

KJØP
-11%
MASKING TAPE FOR CURVES 12MM

129,-

KJØP
 This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic XF-78 Wooden Deck Tan                               Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin,             styrofoam and wood.           Excellent for either brush or spray painting.           Covers well, flows smoothly with no blushing or fading, and can be             blended easily.           Jar will accept standard airbrush lid.           Can be washed away with plain water if done prior to curing.           Available in 19 glossy, 45 flat and 7 translucent colors plus an             exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Wooden Deck Tan paint REQUIRES: Paint Brush or Airbrush to apply to model.           Eye, Lung and Skin protection.           Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children.           Highly Flammable Paint.           For Adult Modelers Only.

30,-

KJØP
 This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin,             styrofoam and wood.           Excellent for either brush or spray painting.           Covers well, flows smoothly with no blushing or fading, and can be             blended easily.           Jar will accept standard airbrush lid.           Can be washed away with plain water if done prior to curing.           Available in 19 glossy, 45 flat and 7 translucent colors plus an             exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Hull Red paint (rusted red). REQUIRES: Paint Brush or Airbrush to apply to model.           Eye, Lung and Skin protection.           Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children.           Highly Flammable Paint.           For Adult Modelers Only.

30,-

KJØP
EXCEL 16018 EXCEL K18 SOFT GRIP KNIFE NON ROLL WITH SAFETY CAP Features include comfortable soft grip handle, 4 jaw machined aluminum chuck for secure blade positioning, super sharp #11 blade, and a convenient rear blade release. Available in 6 colors. .375 x 5in - .9 x 12.7cm. Note: Only 1 knife is included.

169,-

Ikke på lager
Material: Aluminium Length: 140mm Colour: Black Qty: 1Pc

59,-

KJØP
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-17 Metallic Green).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
  This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin,             styrofoam and wood.           Excellent for either brush or spray painting.           Covers well, flows smoothly with no blushing or fading, and can be             blended easily.           Jar will accept standard airbrush lid.           Can be washed away with plain water if done prior to curing.           Available in 19 glossy, 45 flat and 7 translucent colors plus an             exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Green paint REQUIRES: Paint Brush or Airbrush to apply to model.           Eye, Lung and Skin protection.           Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children.           Highly Flammable Paint.           For Adult Modelers Only.

30,-

KJØP
 This is Tamiya Color Spray Lacquer for Plastic Models                          (TS-68 Wooden Deck Tan)                          For Adult Modelers Only. FEATURES: Specially developed for decorating plastic bodies           This is a synthetic lacquer that cures in a short period of time.           This paint is impervious to acrylic or enamel paints           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 3.4oz (100ml) COMMENTS:  Highly flammable.

109,-

KJØP
 This is Tamiya Color Spray Lacquer for Polycarbonate                       (TS-66 IJN Gray Kure Arsenal)                         For Adult Modelers Only. FEATURES: Specially developed for decorating plastic model bodies           This is a synthetic lacquer that cures in a short period of time.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 3.4oz (100ml) COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Hull Red Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

KJØP
Kyosho 32641RBK Mini-Z AWD Toyota Corolla Levin AE86 Red-Black (MA020N-L/KT531P) AWD series is a Four Wheel Drive chassis with Drift tires and paired with the Syncro KT-531P Transmitter. Perfect for drifting in small spaces. To bring its dynamic performance to even more drivers, the MINI-Z AWD is now available in a Readyset. The MA-020 chassis features VCS (variable camber suspension) on the front that optimizes camber change with suspension stroke and a specially designed circuit board. The chassis design allows space for installing the optional gyro unit(Sold separately:No.MZW446). The gyro can be adjusted by turning a small volume on the chassis to reflect the amount of steering correction in response to changes in chassis posture, allowing beginners through to experts to drive to their full potential. Fully fitted out with precision ball bearings, the high drive efficiency of the MA-020 chassis is complimented in the Readyset by the unique scale body and 2.4GHz Syncro KT-531P R/C system that requires no frequency band setting; all at a great value price. Simply set the batteries to enjoy the thrill of drift driving with the included set of drift tires. The chassis is compatible with nearly all ASC MINI-Z bodies (additional parts maybe required for some body styles). The MINI-Z AWD promises a unique world of dramatic racing action for you to experience and enjoy. *The separately sold LED light unit set (No.MZW429R) can be installed on the Toyota Corolla Levin AE86. ●MINI-Z AWD Readyset based on MA-020 chassis. ●Special circuit board updated with optimized steering control program. ●Chassis features gyro sensitivity adjustment function. ●Drift tires are installed as standard. ●Readyset requires only batteries to be ready for action! ●Features 2.4GHz Syncro KT-531P transmitter that requires no setup of frequency bands. ●Factory completed body comes with display model quality finish. ●Features VCS (variable camber suspension) that adjusts camber in accordance with suspension stroke. ●Coil spring on front suspension can be easily replaced without tools. ●wide range of optional parts is available to be installed. ●Note) Optional ICS can NOT be used. Also, this model is specially designed for the KT-531P transmitter. It is not compatible with the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. It is only compatible with the special gyro unit (sold separately:No.MZW446). Also known as the ‘Hachiroku’, the Corolla Levin AE86 was released in 1983 and is distinguished by its FR layout and lively engine response. With a reputation for nimble driving performance, the AE86 along with its brother model, the Sprinter Trueno, has widespread appeal even today. Includes stylish design of Syncro KT-531P transmitter. Features steering / throttle trim as well as dual rate adjustment of steering angle and control the flashing speed of optional LEDs. In addition, the transmitter has a Training Mode feature which limits speed of the car for easy learning (default setting at the time of shipment is Training Mode). Special AWD Sports chassis is based on the MA-02 chassis and features the RA45 unit. Features VCS front suspension that optimizes camber change in concert with suspension stroke. Replacement of front suspension coil springs is easy with no tools required. Equipped with strut-type rear suspension. Full bearing specifications include 14 ball bearings. Equipped with drift tires as standard. Equipped with special mount space and gyro adjustment volume for the optional gyro unit (sold separately:No.MZW446). Specifications: ■Length 164.5mm ■Width 68.0mm ■Height 53.0mm ■Wheelbase 94.0mm(L) ■Tread   F : 56.5mm R : 56.5mm ■Chassis MA-020-N ■Front Wheel Offset Narrow +-0.0mm ■Rear Wheel Offset Narrow  +-0.0mm ■R/C System Syncro KT-531P Ready set contents: ● R / C unit built-in complete chassis ● Painted and marked complete body ● Syncro KT-531P transmitter ● Mini pylon ● Pinion gear (15T, 17T, 19T, 21T) ● Spur gear (27T, 29T, 31T) ● Spare nut ● Wheel wrench ● Pinion removal tool Required for Operation: ●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis. ●AAA-size alkaline batteries x 4 for transmitter

2.995,-

3.595,-

KJØP
-17%
Dette innovative batteriet er siste generasjon oppladbart i AAA størrelse. Det er helt rått for bland annet RC-utstyr. Her får du en høyere spenning, sammenlignet med oppladbare NiMh og NiCd batterier. Det egner seg for bruk i blant annet i RC utstyr, fjernkontroller, elektriske leker, lommelykter, radioer, måleinstrumenter, vekter, sikkerhetskameraer, såpedispensere og elektriske dørlåser osv osv. USB-C ladekabel følger med. Den integrerte elektronikken beskytter cellen mot overlading, overbelastning, kortslutning og dyp utlading. Dette gjør at batteriet er perfekt beskyttet mot feilhåndtering, noe som garanterer lang levetid. Med den integrerte USB-C-ladeporten er ingen ekstra ladere nødvendig! USB-C-kabelen er inkludert i pakken. Dette gjør at 4 AAA-batterier kan lades samtidig med bare én kabel. Så du kan lade trygt og enkelt via alle tilgjengelige USB-ladealternativer som laptop, powerbank, USB-lader til stikkontakten eller bilen. Indikatoren på den positive polen til batteriet blinker under ladeprosessen. Så snart ladingen er fullført, lyser denne jevnt. Det oppladbare ANSMANN AAA Li-Ion-batteriet er ekstremt slitesterkt og kan lades opp til 1200 ganger, selv under tøffe forhold. Takket være den svært lave selvutladingshastigheten beholder batteriet energien over lang tid selv når det ikke er i bruk. I tillegg er vekten til Li-ion-cellen mye lavere sammenlignet med konvensjonelle batteriteknologier (f.eks. NiCd, NiMH/PB) med samme ytelse. Merk: Li-Ion oppladbart batteri kan kun lades via USB til USB-C-kabelen som følger med! Type: Litiumion Nominell spenning: 1,5 V Nominell kapasitet: 500 mAh Minimum kapasitet: 400 mAh Energi: 0,74 Wh Lagringstemperatur: -20 til 25 °C Driftstemperatur: -20 til 60 °

279,-

299,-

KJØP
-7%
Futaba T26SZ - 26ch-2.4GHzFASSTest radio with R7208SB Receiver  The long-awaited successor to the best-selling model “T18SZ”, the new T26SZ is now official! The new T26SZ is positioned in between the highly desirable high-end T32MZ-WC series that is loved by many competitors and the mid-range T16IZ-Super. For pilots who fly anything and everything, demand unquestioned reliability and seek a future-proof radio that offers the highest level of programming sophistication, Futaba’s T26SZ will be impossible to ignore. With its user-friendly interface, twin screens, silky-smooth hall effect non-contact gimbals, near like-for-like 32MZ feature set, elegant styling and latest FASSTest 26ch protocol, the '26SZ is highly likely to tick every box on your extensive wish list. It is a masterpiece that is comparable to the high-end class, and can be said to be the result of Futaba's many years of accumulated know-how and solid results. S.BUS2 SYSTEM Multiple servos, gyros and telemetry sensors can be easily installed with a minimum of cables. MAIN LCD COLOR DISPLAY HVGA 4.3" full color backlit LCD transflective (indoor / outdoor visible) touch screen. SECONDARY LCD DISPLAY A high quality reflective LCD for easy recognition of telemetry information. SD CARD PORT Update software, store model data and upload picture files using the microSD port. HIGH CAPACITY LI-PO 2100mAh offers a comfortable operating duration and real peace of mind. INTUITIVE PROGRAMMING Model-specific programming and editing has never been easier. MULTIPROP CHANNEL EXPANSION Using the MPDX-1 multiprop decoder (sold separately) one channel can be divided into eight channels. Two MPDX-1s can be used. FEELS GOOD Magnetic detection non-contact potentiometers offer fine, ultra-precise, long-lasting operation. A throttle stick external adjustment screw allows ratchet or self-neutralizing spring adjustment. SWITCH REPLACEMENT Change four of the toggles on the right and left shoulder with your chosen two-position, three-position or momentary switch. Features: The T26SZ transmitter is changable to either Mode-1 or Mode-2 in the software. See the manual for more info. FASSTest26, FASSTest18, FASSTest12, S-FHSS & T-FHSS protocols 26 channels (24+2) Full color 4.3 inch touch screen 3.0" LCD sub display High quality finish Model image display Smooth non-contact stick potentiometer Shoulder switch upgrade / replacement Four rear sliders (paired) Vibration alert Voice function Telemetry system Four stick modes (1-4) MicroSD card software update High capacity LiPo USB-C charging Earphone jack Calendar clock S.BUS I/F enabled Wireless trainer system ±240 step sub trim Sub trim balance DLPH-2 settings Receiver mode-setting port Gyro setting for CGY755 / 760R / 770R / GYA553 8 flight conditions 30 pre-programmed mixers 10 free programmable mixers Retract and door sequencer 13 fixed-wing types 3 fixed-wing tail types 2 fixed-wing rudder types 8 helicopter swash types Supports 14 telemetry sensor types GPS enabled Key Programming Features (for full list see manual): Model name (15 characters) Sub trim Sub trim balance Servo reverse Fail-safe Exponential Throttle cut End point / ATV (30 - 140%) Servo speed Trainer function Servo monitor Trim setting (step, rate, mode) Data editor (for S.Bus equipment) 10 programmable mixers 30 pre-programmed mixers Aileron differential Air brake Flap trim Flap setting Butterfly Camber mix Camber flap-elevator Elevator to camber Aileron to camber flap Aileron to rudder V tail Ailvator Winglet Aileron to brake flap Snap roll Servo monitor Twin timers Stick alarm Battery fail-safe Gyro sense Multi engine Motor mix Condition name AFR (dual rate) AFR (curve mode) AFR curve point number (17 points) Logic switch (condition switch only) Acceleration mixing Pitch curve / pitch trim Throttle curve / throttle hover trim Pitch to needle mix Revolution mix Swash ring Idle down Throttle limiter Swash setting Swash AFR System timer Function setting Governor Telemetry functions: Temperature RPM (magnetic & optic) Altitude GPS Voltage Receiver battery Current Data logging What's in the Box: T26SZ 26-channel transmitter R7208SB receiver 7.4V 2000mAh Li-Ion Tx battery pack USB-C charge lead Neck strap Tool set Short manual (full pdf manual as download)

11.295,-

12.995,-

KJØP
-13%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png