Hopp til innhold

Traxxas 5563 Shredder Front Tires w/Insert Jato (2)

Art.nr: TRX 5563

249,-

Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

       This is a pair of Front Shredder Tires from
                   Traxxas for use with the Jato.

FEATURES: Angled rib design, with two ribs to the left and right of center
          2.8" tire

INCLUDES: Two Shredder front 2.8" tires
          Two foam inserts

REQUIRES: Jato wheels
          Tire glue

SPECS:    Width: 2" (50mm)
          Inner Diameter: 2.8"(71.12mm)
          Outer Diameter: 3.6" (92mm)

COMMENTS: The Traxxas Jato can also use standard 2.2" truck wheels and tires.

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 5576A
Copied
These are the All-Star 2.8" Black Chrome Wheels          for the Traxxas Stampede and Rustler. FEATURES: Black chrome wheels INCLUDES: Two All-Star 2.8" black chrome wheels for the nitro rear/electric              front REQUIRES: Installation on the vehicle SPECS:    Overall Diameter: 2.8" (71mm)           Width: 1.92" (49mm)

109,-

KJØP
Art.nr: TRX 5576
Copied
These are the Rear Chrome Wheels.           FEATURES: Nylon construction           Chrome plated           Five spoke wheel pattern           Uses 12mm hex adapter INCLUDES: Two Rear Chrome Wheels REQUIRES: Assembly onto Vehicle SPECS:    Outer Diameter: 3.08" (78.3mm)           Width: 1.91" (48.6mm)           Bead Diameter: 2.83" (72mm)

99,-

KJØP
Art.nr: TRX 5576R
Copied
Anaconda® performance street tires feature a specially formulated tire compound providing exceptional wear and sticky traction. Anaconda tires come mounted and pre-glued on 2.8" All-Star chrome wheels for no-hassle, out-of-the-box bolt-on traction. Molded-foam inserts coupled with the directional tread design provide a balanced feel for the ultimate high-speed on-road experience. Sold as a pair. Fits 12 mm hex nitro rear, electric front.    This is a pair of the Traxxas 2.8" Rear Chrome All Star Wheels with     Anaconda Tires and Foam Inserts for the Jato Stadium Truck FEATURES: Chrome plated plastic, five spoke design           Split X-Pattern tread tires with foam inserts INCLUDES: Two Traxxas 2.8" Rear Chrome All Star Wheels with Anaconda Tires and             Foam Inserts REQUIRES: Installing on vehicle SPECS:    Wheels;                       Tires;             Width: 1.91" (48.6mm)         Overall Diameter: 3.8in (97mm)             Diameter: 2.8" (71mm)         Wheel Diameter:   2.8in (71mm)             Hex Size: 12mm                Width:            2.0in (51mm)

379,-

399,-

KJØP
-5%
Art.nr: TRX 3771
Copied
These are a set of Traxxas 2.8" Mounted Wheels and tires FEATURES: 2.8" All Star chrome wheels           Ribbed pattern INCLUDES: Two 2.8" mounted tires, All Star chrome wheels and  inserts REQUIRES: Installation on vehicle SPECS:    Outside diameter: 4" (101mm)           Width:2" (50.8mm)           Inside diameter: 2.8" (71mm)

359,-

KJØP
Art.nr: TRX 3771A
Copied
This is the set of Traxxas 2.8" Mounted All Star Wheels and Tires                         for the Rustler VXL, TRAC88**. FEATURES: 2.8" All Star black chrome wheels           Ribbed pattern INCLUDES: Two 2.8" mounted nitro rear/electric front tires, All Star chrome             wheels and foam inserts REQUIRES: Installation on vehicle SPECS:    Outside diameter: 4.13" (105mm)           Inside diameter: 2.8" (71mm)           Width: 2.04" (52mm)           Hex Size: 12mm

369,-

Ikke på lager

Kunder kjøpte også

This is an optional Wheelie Bar Mount for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, black in color           Installs at rear of chassis to hold wheelie bar arm and wheels in             place INCLUDES: Assembled optional Wheelie Bar Mount with mounting instructions and             hardware REQUIRES: Wheelie Bar Arm                   Wheels and Axles

49,-

KJØP
 This is a 1/3oz Bottle of Plasti-Zap CA Glue from Pacer. FEATURES: Medium viscosity formula.           Cures clean and clear.           Will not attack paint.           Works on most plastics and vinyl.           Non-flammable and non-sniffable.           Permits rapid kit assembly in seconds. INCLUDES: One 1/3oz Bottle of Plasti-Zap CA Glue. SPECS:    1/3oz (9.47g)

69,-

KJØP
This is the Receiver Box for use on the               Traxxas Stampede, Rustler, and Bandit Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Receiver Box           One Rubber Seal           Foam Padding           Two 2.5x8mm Cap Head Screws           Two 3x10mm Cap Head Screws           Two 2.5x10mm Cap Head Screws           One Tube of Grease           Instruction sheet REQUIRES: Installation on the vehicle SPECS:    Length: 78mm (3.07")           Width: 35mm (1.4")           Height: 33mm (1.3")

145,-

Ikke på lager
Denne erstatter TRX 6845  This is the replacement Steering Bellcrank Set for the Traxxas Slash 4X4. FEATURES: Composite nylon construction, black in color           Replaces a worn or damaged bellcrank set INCLUDES: One Left Bellcrank Lower           One Left Bellcrank Upper           One Right Bellcrank           One Draglink           One Spring Retainer           Two Servo Arms           Two Shoulder Screws           Two 3x15 Counter Sunk Machine Screws           Two Hallow Balls REQUIRES: Assembly and installation following the model manual and included              instruction sheet

149,-

169,-

KJØP
-12%
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-5 Black).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
  This is the Traxxas #3727 Rustler Battery Hold-Down Plate, Metal Post and Body Clip replacement parts for the Rustler truck. INCLUDES:  1  Black plastic hold-down plate,  (2 5/8" long, 3/8" wide and                  has 2 holes that attach to the posts).            2  Metal posts  (Aluminum with a hex shaped top and hole                  for the body clip, threaded on bottom).            2  Steel body clips.   COMMENTS: Body clips are bent for easier installation.    

39,-

KJØP
Mounting plate, electronic speed control (for installation of XL-5/VXL into Bandit or Rustler®)

39,-

KJØP
Traxxas 3728 Lower Chassis Black (Long Battery) Bandit/Rustler

189,-

KJØP
Traxxas 3729-BLK Upper Chassis Black Bandit/Rustler

79,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png