Traxxas

Zap PT21 Flexi Tips (24)

Art.nr: PT-21

59,-

Zap

Zap

På lager: 1

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Zap PT21 Flexi Tips (24)

Produsent

Zap

Zap

Kunder kjøpte også

Hovedbilde Tamiya 87206 masking tape 1mm

Hovedbilde Tamiya 87206 masking tape 1mm

Tamiya 87206 masking tape 1mm

Tamiya 87206 masking tape 1mm Paper tape that can be conveniently used for different paintings A thin, highly adhesive masking tape developed exclusively for models. It fits well on the uneven surface and does not soak in the paint, and the thinness of 0.08 mm makes the step difference between different coatings inconspicuous. As the width is as thin as 1 mm, it is ideal for curved parts and fine painting, such as window moldings for car models and canopies for airplane models. A reinforcing plate is attached to the side surface to prevent dust from adhering and the tape to be deformed. The core material is made of plastic that does not generate paper dust. Basic specifications Width 1 mm, length 18 m. The color is yellow. A PET reinforcing plate is attached to the side. This is dedicated masking tape developed for plastic models. Features superior adhesion, yet at only 0.08mm thick, it retains the flexibility to cover various non-flat surfaces. At just 1mm wide, it is perfect for use on car model windows, aircraft model canopies and on other fine jobs. Plates on either side of the tape help stop it losing shape or getting dust and dirt stuck to it. Plastic core ensures minimal dust is produced. Length: 18m, width: 1mm Uses a resin core material that does not generate paper dust. The sides are reinforced with PET resin discs. Delicate masking is possible according to the shape of fine parts and curved parts.

49,-

Hovedbilde Power HD-1900A Analog 1.5kg 9.0g

Power HD-1900A Analog 1.5kg 9.0g

Power HD-1900A Analog 1.5kg 9.0g Weight:9.0g(less connector) Dimension:22.8x20.6x11.8mm Supply voltage:4.8~6.0V Stall Torque:1.5kg.cm Operating Speed:0.12sec/60°(no load running) Storage Temperature :0?~55? Dead band width:=4us

79,-

Hovedbilde Tamiya 74001 Side Cutter For Plastic

Tamiya 74001 Side Cutter For Plastic

Dette er en presisjons sidekutter for å fjerne deler fra støpe-treet – altså fra plast brettet – uten å skade dem. Den slagfaste kromvanadiske legeringen er utviklet eksklusivt for plastmodellering og er valgt for lang levetid. Høykvalitets vinylbelegg sikrer godt grep. Dette er ett MUST for modellbyggeren. Denne må du ha for å lykkes med ditt plast sett.

399,-

449,-

-11%

Hovedbilde Zap PT18 Z-End Extened Glue-tips + teflon tubing (10)

Zap PT18 Z-End Extened Glue-tips + teflon tubing (10)

Extender tips allow smaller drops of glue to be placed For those hard-to-reach places Very handy! Works best on: Zap and super glue products Includes: 10 extended tips and 12 inches of micro dropper tubing

59,-

Hovedbilde Poly-Zap CA 1/2OZ PT-22

Poly-Zap CA 1/2OZ PT-22

MEDIUM VISCOSITY MULTI PURPOSE FORMULA STRONG AND FLEXIBLE DRIES CLEAR IDEAL FOR LEXAN PT-22 1/2 oz. Poly-Zap POLY ZAP Is a specialty CA adhesive developed for use on today’s newer plastics. Lexan is one of the more difficult plastics to bond, and POLY ZAP was developed to solve that problem. It works on many types of films and painted surfaces. Its perfect for today’s ARF type models. ABS cowls, canopies, Lexan car bodies, fiberglass repair, model boat parts, and automotive trim are just a few of the many applications for POLY ZAP. To prevent fogging of clear parts do not use a Kicker. Works best on: ABS Delron Fiberglass Lexan Most Acrylics Polycarbonate Nylon Rubber Styrene

99,-

Hovedbilde Zap PT19 Adhesives Plastic Zap CA 1/3 oz

Zap PT19 Adhesives Plastic Zap CA 1/3 oz

This is a 1/3oz Bottle of Plasti-Zap CA Glue from Pacer. FEATURES: Medium viscosity formula. Cures clean and clear. Will not attack paint. Works on most plastics and vinyl. Non-flammable and non-sniffable. Permits rapid kit assembly in seconds. INCLUDES: One 1/3oz Bottle of Plasti-Zap CA Glue. SPECS: 1/3oz (9.47g)

69,-

Hovedbilde Tamiya 87053 Putty Basic Type

Tamiya 87053 Putty Basic Type

This is a tube of Basic Type Tamiya Putty. FEATURES: Designed for use in repairing and modifying plastic models May also be used for repairing and covering surface of metal and wooden models May be diluted with Tamiya Lacquer thinner before curing INCLUDES: 1.12oz (32g) Tube of Basic Type Tamiya Putty

49,-

Hovedbilde LouiseRC 3278SB Tire & Wheel ST-PIONEER 2,2

Hovedbilde LouiseRC 3278SB Tire & Wheel ST-PIONEER 2,2

LouiseRC 3278SB Tire & Wheel ST-PIONEER 2,2" Black ...

Truck Tires on 2.2" Wheels Truck tires mounted on 2.2" black wheels that is a perfect upgrade for your Traxxas 1/16 E-REVO or 1/16 Summit. Fits: Traxxas 1/16 E-REVO Front & Rear Traxxas 1/16 SUMMIT Front & Rear HPI Savage XS Flux Front & Rear 1/10 Scale Buggies Rear Specs: Wheel diameter: 2.2" Tire Diameter: 92.5 mm Tire Width: 43.5 mm Weight (each): 87 g Hex: 12 mm Tire Compound: Soft Wheel finish: Black Nylon Original Traxxas 1/16 E-REVO Tire info: Diameter: 82 mm Width: 46 mm Total Track Width: 240 mm Traxxas 1/16 E-REVO with Louise ST-Pioneer 2.2" Truck Tires: Total Track Width: 260 mm (+10 mm off-set per wheel) 10.5 mm larger diameter: you may need adjust the vehicle gearing to not overload the motor/esc The added off-set may put more load on the steering servo

269,-

289,-

-7%

Hovedbilde Traxxas 3949X Pinion Gear 19T-32P Hardened Steel

Traxxas 3949X Pinion Gear 19T-32P Hardened Steel

Gear, 19-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

99,-

-10%

Hovedbilde Traxxas 3947X Pinion Gear 17T-32P Hardened Steel

Traxxas 3947X Pinion Gear 17T-32P Hardened Steel

Gear, 17-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw

89,-

99,-

-10%

Hovedbilde Tamiya 53440 On-Road Spring Hard

Tamiya 53440 On-Road Spring Hard

This is an on-road tuned hard spring set from Tamiya. FEATURES Features eight color coded springs. Soft, medium, stiff,and extra stiff spring tensions. These springs are ideal for high speed racing. INCLUDES Two soft springs(red) Two medium springs(yellow) Two stiff springs(blue) Two extra stiff springs(white) SPECIFICATIONS Length- 26.3mm(1.03") Diameter- 13.4mm(0.53")

189,-

Hovedbilde Traxxas 5114 Ball Bearings 5x8x2.5mm Revo (2)

Hovedbilde Traxxas 5114 Ball Bearings 5x8x2.5mm Revo (2)

Traxxas 5114 Ball Bearings 5x8x2.5mm Revo (2)

Disse lagerene er samme størrelse som Tamiya 850 This is a 2 pack of Traxxas 5X8mm Ball Bearings. FEATURES: Metal bearing construction Blue rubber dirt shields INCLUDES: (2) 5X8mm ball bearings Part #5114 SPECS: Inside diameter: 3/16" (5mm) Outside diameter: 5/16" (8mm) Width: 3/32" (2.5mm)

49,-

Hovedbilde Zap PT09 Adhesives Zap CA 1/2 oz

Zap PT09 Adhesives Zap CA 1/2 oz

The ZAP CA Glues are clog-resistant with and have an extra, long tip to reach into tight spots. Easy-to-squeeze bottles aid in applying just the right amount of glue for easier sanding and less mess. Not safe for foam. For foam applications use epoxy or foam-safe CA. FEATURES Wicks quickly for instant bonds on tight-fitting parts. INCLUDES One ZAP CA Glue 1/2oz Thin COMMENTS Thin is instant setting: CA Thick is gap filling: CA+

79,-

Hovedbilde Absima 73WT/1000CPS Silicone Differential Oil 60ml

Absima 73WT/1000CPS Silicone Differential Oil 60ml

Features: Viscosity 1000CPS / 73WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. 1 bottle /60ml

99,-

Hovedbilde ZIP KICKER 2OZ 59 ml PT715

Hovedbilde ZIP KICKER 2OZ 59 ml PT715

ZIP KICKER 2OZ 59 ml PT715

ZAP Zip Kicker Akselerator for ZAP og andre typer hurtiglim (cyanoacrylate). Bør brukes med forsiktighet. Passer ikke for isopor/depron. Unngå å få Zap og Kicker på fingrene samtidig da dette kan utvikle høye temperaturer og kan gi forbrenninger. Vekt: 56,7 gram – 59ml Faremerking PT 715

139,-

Hovedbilde Absima 719WT/15000CPS Silicone Differential Oil 60ml

Absima 719WT/15000CPS Silicone Differential Oil 60ml

Features: Viscosity 15000CPS / 719WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. 1 bottle /60ml

110,-

Hovedbilde Absima 3562WT/100000CPS Silicone Differential Oil 60m

Absima 3562WT/100000CPS Silicone Differential Oil 60m

Features: Viscosity 100000CPS / 3562WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. 1 bottle /60ml

119,-

Hovedbilde Absima 1985WT/50000CPS Silicone Differential Oil 60ml

Absima 1985WT/50000CPS Silicone Differential Oil 60ml

Features: Viscosity 50000CPS / 1985WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. 1 bottle /60ml

109,-

Hovedbilde Absima 1290WT/30000CPS Silicone Differential Oil 60ml

Absima 1290WT/30000CPS Silicone Differential Oil 60ml

Features: Viscosity 30000CPS / 1290WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. 1 bottle /60ml

110,-

Hovedbilde Absima 511WT/10000CPS Silicone Differential Oil 60ml

Absima 511WT/10000CPS Silicone Differential Oil 60ml

Features: Viscosity 10000CPS / 511WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. 1 bottle /60ml

109,-