Hopp til innhold

Traxxas 8337 Steering Block (2)

Art.nr: TRX 8337

49,-

Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

 

Steering Block (2)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Traxxas 82044-4-GREY - TRX-4 Sport High Trail Edition - GREY Purpose Built TRX-4® Sport combines the unbeatable ground clearance and driving dynamics of Traxxas portal axles, sticky Canyon Trail™ tires, and a clipless lightweight pickup truck body for a leaner, performance-focused truck. The Sport’s unique bumpers, wheels, and body were designed for increased climbing versatility. Whether it’s a fun trail run or a hardcore technical crawl, the TRX-4 Sport’s capability and performance-built approach takes your outdoor adventure to a new level. New Clipless Body Mounting New to TRX-4 Sport, clipless body mounting combines clean flowing lines with secure latching convenience. TRX-4 Sport’s hidden latches hold tight on the trail no matter how intense the action gets, but release in just seconds to access the chassis. Features: Trail-Tuned XL-5 HV Waterproof Electronic Speed Control Fully waterproof design Traxxas EZ-Set® one-button setup Large, efficient heat sink Wide voltage latitude 6–7 cell NiMH (7.2–8.4V) and 2–3s LiPo (7.4–11.1V) Two stage low voltage protection (LVD) Five drive profiles: Sport Mode — forward / brake / reverse Race Mode — forward / brake / no reverse Training Mode™ — 50% forward / 100% brake / 50% reverse (patented) Trail Mode — forward / brake / reverse / with trail-tuned drag brake in neutral Crawl Mode — forward / instant reverse - no neutral with 100% hill holding brake Motor Powerful Titan™ 21T reverse rotation motor with internal cooling fan Precise preset gear mesh adjustments Motor retention separate from gear mesh Portal Axles Increase ground clearance Eliminate torque twist Steel gears Improve axle geometry and reduce strain on driveshafts Rigid Steel Frame 1.5 mm thick steel frame rails increase torsional rigidity Innovative design allows four wheelbase positions (300mm, 312mm, 324mm, 336mm) Adjustable rear shock tower positions for SWB and LWB configurations Bumpers adjust fore and aft Rugged rock rails adjust for width Wire routing clips integrated into frame rails Drivetrain Full-time shaft driven 4-wheel drive Tough 6 mm stub axles Steel front CV driveshafts Hardened steel rear axle shafts Spool-locked front and rear differentials Steel gear transfer case Innovative Battery Compartment Hinged battery strap allows quick and easy battery access No pins to lose Accommodates different height batteries Accepts full-size long battery packs Integrated compartment accepts smaller 1/16 scale batteries (with optional strap) Transmission Single-speed with steel gears Dual horizontal shafts Twin friction plate slipper clutch Easily removed for servicing Steering Chassis mounted 2075X metal gear digital servo Superior 45° steering angle Direct steering (no servo saver) Steering geometry corrected for bump steer Suspension Front — 3 link with panhard Rear — triangulated 4 link Heavy-duty rod ends with steel hollow balls 5mm diameter steel link rods with 4mm threaded ends Aluminum GTS Shocks Oil-filled coilover GTS shocks exclusive to TRX-4 chassis Silver-anodized aluminum bodies Threaded bodies with collars easily adjust ride height Silky smooth damping for the toughest trails O-ring cap seal and dual X-ring shaft seals Wheels and Tires Rugged black 5-spoke wheels Pre-mounted 1.9” Canyon Trail tires with trail-tuned foam inserts Trail tuned S1 rubber compound 12mm steel hex   TQ™ 2.4GHz 2-channel transmitter Patented O-Ring Sealed Watertight Receiver Box Keeps the Micro Receiver Dry Sealed Ball Bearings Hex Hardware with Rust-Resistant Black Oxide Coating TRX-4 SPORT DATA: Length: 557 mm Front Track: 249 mm Rear Track: 249 mm Ground Clearance: 80 mm Weight: 2.63 kg Height: 241 mm Wheelbase: 312 mm Approach Angle: 58.82° Departure Angle: 45.83° Breakover Angle: 58.93° Front Shock Length: 90 mm Rear Shock Length: 90 mm Front Wheels: 1.9 x 1.02 inches (49 x 26 mm) Rear Wheels: 1.9 x 1.02 inches (49 x 26 mm) Front Tires: 4.64 x 1.89 inches (118 x 48 mm) Rear Tires: 4.64 x 1.89 inches (118 x 48 mm) Hex Size: 12 mm Speed Control: XL-5 HV Motor (electric): 21T Reverse Rotation Transmission: Single Speed Gear Pitch: 32P Differential Type: Locked Spool Chassis Structure / Material: Steel Ladder Frame with Nylon Composite Crossmembers Brake Type: Electronic “Hill Hold” Drive System: Shaft Driven 4WD Steering: Chassis Mounted Servo Servo: 2075X Metal Gear Transmitter: TQ™ 2.4GHz 2-Channel Transmitter Receiver: 6519 Skill Level: 2 Battery Tray: L158.75 x W47 x H23/26 mm XL-5 HV ESC Specs: Input Voltage: 6–7 Cells NiMH, 2–3s LiPo Case Size: 1.23” W x 2.18” D x 1.04” H Weight: 74 g Motor Limit: 21-turns (550 size) On Resistance Forward: 0.004 Ohms On Resistance Reverse: 0.004 Ohms Peak Current - Forward: 100A Peak Current - Reverse: 100A Braking Current: 60A Continuous Current: 18A BEC Voltage: 6.0 VDC BEC Current: 1A Power Wire: 14 Gauge / 5” Input Harness Wire: 26 Gauge / 14.5” ransistor Type: MOSFET PWM Frequency: 1700Hz Low Voltage Detection (LVD): 2-Stage indicators, switchable (on or off) Thermal Protection: Thermal Shutdown Single-button setup: Yes, Traxxas EZ-Set® Profile selection:  Sport Mode: 100% FWD, 100% brakes, 100% REV Race Mode: 100% FWD, 100% brakes, no REV Training Mode:* 50% FWD, 100% brakes, 50% REV Trail Mode: 100% FWD, 100% Brake, 100% REV, Trail-Tuned Brake on Neutral Crawl Mode: 100% FWD, 100% Instant REV, 100% Brake on Neutral * Patented Motor Specs: Type: High-torque brushed motor Size: 550 Weight: 390 g Length: 78mm (Overall) - 57 mm (Can) - 38.9 mm diameter Turns: 21T reverse rotation Voltage: 16.8V What’s In The Box: TRX-4, Ready-To-Drive® model XL-5 HV waterproof electronic speed control Titan™ 21T reverse rotation motor TQ™ 2.4GHz radio system High quality maintenance tools What You’ll Need: Batteries: TRX-4 accepts a wide variety of NiMH (4–7 cell) and LiPo (2s–3s) batteries. Charger: Traxxas EZ-Peak Live charger is recommended for easy and fast charging performance (model #2971). AA Alkaline Batteries: Four AA alkaline batteries for the transmitter.

4.495,-

4.995,-

KJØP
-10%
These are the Suspension Screws Pins for the                      Traxxas Rustler, Stampede and Bandit.            The hinge pins hold the suspension arms to the bulkheads FEATURES: Durable steel construction INCLUDES: Two 48mm pins           Two 34mm pins           Two 30mm pins           Two 28mm pins           Two 25mm pins REQUIRES: Installation on the Rustler, Stampede or Bandit

59,-

69,-

KJØP
-14%
These are Steering Bellcranks and Draglinks for the                       Traxxas Rustler and Stampede. FEATURES: White Plastic Construction INCLUDES: One Bellcrank           One Link           One Arm REQUIRES: Rustler of Stampede COMMENTS: None  

49,-

KJØP
This is the Traxxas replacement #3631 Front Suspension Arms for for the Stampede and Rustler. FEATURES:    Made from black molded nylon    For the Traxxas Stampede and Rustler. SPECS:    Length: 3 1/4"    Thickness: 3/8"    Width at end near chassis: 1 1/2"    Width at end near wheels: 7/8" INCLUDES:    (2) Front suspension arms for the Traxxas Stampede.

99,-

KJØP
This is a Package of Six 3mm x 10mm Button Head Screws. FEATURES: Metal Construction           Black in Color           Button Head Type           Machine Thread INCLUDES: Six 3mm x 10mm Button Head Machine Thread Screws REQUIRES: Nothing.

35,-

KJØP
This is a Traxxas 48P, 90T Spur Gear for models                        with Torque Control Slipper Clutch. FEATURES: 48 pitch           90 tooth           Designed for models with a slipper clutch           Black plastic construction INCLUDES: One spur gear SPECS:    Pitch:   48           Tooth:   90

49,-

KJØP
These are the Rear Suspension Arms for the    Traxxas Electric SRT, Nitro Rustler, Nitro Sport and Nitro Stampede Kits. FEATURES: Durable Black plastic construction INCLUDES: One left suspension arm           One right suspension arm REQUIRES: TRX 1739 screw pins for installing SPECS:    Length: 3-5/8"                         

119,-

KJØP
This is the replacement front shock shafts for the Traxxas LSII. Includes: 2- front shock shafts.

39,-

KJØP
   This is Tamiya Color Spray Lacquer for Polycarbonate (PS-3 Light Blue).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-8 Light Green).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.                    Highly flammable.

109,-

KJØP
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-16 Metallic Blue).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-21 Park Green).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-23 Gun Metal).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-28 Fluorescent Green).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-32 Corsa Gray).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
Ths is PM-4 a Blue Colour Polycarb Paint Marker by Tamiya For Lexan Body Painting And Detailing Tamiya Polycarb Paint Marker contains a water soluble paint for use on clear Polycarbonate bodies of R/C vehicles. (E)

49,-

99,-

KJØP
-51%
This new R/C Tool Set can is one that all R/C enthusiasts should have! You know that for building any R/C car, this set will help you get the job done. The 2mm Hex wrench comes in super handy for doing wheel changes with TamTech-Gear machines. About the Item •No1. and No.2 phillip head screwdrivers are made from Nickel chrome molybdenum steel. •1.5, 2, 2.5 Hex wrenches are made from Nickel chrome molybdenum steel. •Size 5 minus (-) screwdriver. •Size 5.5 & 7 box driver. •Comes with a convenient driver stand. Tamiya Craft Tools R/C Tool Set 74085

369,-

399,-

KJØP
-8%
Versatile. Customizable. Incredible. The 1/10, 2WD electric M-07 Concept Chassis Kit combines superior response and easy maintenance to create the ultimate high-performance race car! Highlights include a rigid monocoque frame chassis, a silky-smooth drivetrain, a choice of 225 mm or 239 mm wheelbases and a double wishbone suspension. Monocoque frame chassis with detachable lower section. 2WD with universal driveshafts. Oil-filled CVAs.Four-wheel double wishbone suspension with dedicated long arms for a variety of set-up options. High-torque servo saver. Gear differential can be removed from the underside with minimal disassembly. Foam front bumper. Full set of ball bearings. Adjustable rear toe angle. This is the Electric Powered, Radio Controlled 1/10 scale On-Road M-07 Concept Chassis Race Car kit from Tamiya.   FEATURES Chassis: Monocoque frame type with detachable lower section Drive: Rear wheel with universal driveshafts Differential: Gear type, can be removed from underside with minimal disassembly Shocks: Oil-filled CVA (constant volume adjustable) Suspension: Four wheel double wishbone with dedicated long arms for a variety of setup options Front Bumper: Foam Ball Bearings: Full set included Servo Saver: High-torque Wheels: Black plastic, eight spoke 1.5" (38mm) diameter, 0.83"(21.2mm) wide Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis   INCLUDES M-07 Concept Chassis Race Car kit with Shocks, Ball Bearings, Decals, 20T Pinion Gear, Shock Oil and Instruction Manual   REQUIREMENTS Radio System: 2-channel with high-speed steering servo Motor: 540 size ESC: Compatible with selected motor Battery: 7.2V stick pack Battery Charger: Compatible with selected battery AA Batteries: Eight, four for transmitter, four for battery box Tires: 1/10 scale on-road with foam inserts Polycarbonate safe spray or brush-on paint Building and field equipment   SPECIFICATIONS Wheelbase: Adjustable from 8.8" (225mm) to 9.4" (239mm)

2.395,-

2.695,-

Ikke på lager
-11%
Tire & wheel assy, glued (SCT black, orange beadlock wheels, SCT off-road racing tires, foam inserts) (2) (2WD front)

349,-

369,-

KJØP
-5%
Tires & wheels, assembled, glued (SCT black, orange beadlock wheels, dual profile (2.2" outer, 3.0" inner), SCT off-road racing tire, foam inserts) (2) (4WD f/r, 2WD rear) (TSM rated)

349,-

369,-

KJØP
-5%
Traxxas 9137 - Steering blocks, extreme heavy duty, black (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit) Replacement left and right steering blocks for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts as well as Traxxas aluminum accessories.

79,-

89,-

KJØP
-11%
Genial til Tamiyabiler! Radio og mottaker. Servo 6kg Dette settet fra MStyle inneholder radio og mottaker og 6kg analog servo. Denne pakken vil være genial for den som har et kit eller eldre bil liggene som trenger utstyr.   R/C Set - Radioset with Servo.   The new R/C set from MStyle is the ultimate package for anyone looking to build or upgrade their R/C car with high-quality electronics. This all-in-one kit provides nearly everything you need to get your vehicle up and running, whether you"re a hobbyist or a seasoned R/C enthusiast.   What’s included in the set: Radio T-401 2.4GHz: A reliable, easy-to-use transmitter offering precise control for your R/C car. Receiver R-401 4Ch 2.4GHz (Waterproof): A durable and waterproof receiver designed to ensure stable connectivity in various conditions. Servo S-602W 6KG: A powerful and responsive servo with a 6kg torque capacity, perfect for handling sharp turns and quick movements.   Whether you’re assembling a new car or upgrading your current one, this set is designed to simplify the process and deliver a premium R/C experience. Get ready to take your R/C car to the next level with MStyle!     Transmitter T-401 The MStyle T-401 4-Channel radio system uses the latest digital 2.4GHz radio technology to give you trouble-free, total control of your RC car. This is a fully featured, lightweight, 4-channel radio with advanced ergonomic features and total adjustability. Thanks to its crystal-free 2.4GHz technology, you will be able to confidently drive with your friends without worrying about things like frequencies or radio conflicts, and the waterproof R-401 receiver allows you to take your RC vehicle anywhere you can dream! The advanced features of the MStyle T-401 let you set the radio up for your car with custom settings like servo reversing, center trim, dual rate and end point adjustments. Only 4 AA batteries are required to power the MStyle T-401, so it"s light in your hands, and the foam steering wheel makes it comfortable to hold. With the built-in failsafe feature, you will be protected just in case the radio transmitter loses its connection with the receiver. MStyle T-401 Radio Features Digital 2.4GHz FHSS technology 4 Channel Digital on and off switch Foam-covered wheel for extra comfort and grip Servo end point adjustments for steering and throttle Servo reversing Steering dual rate Centre trim (steering and throttle) Audible warnings if you leave the MStyle T-401 switched on as well as battery life! Lightweight (only 4 AA batteries required)     Receiver R-401 The R-401 is the latest receiver for the MStyle T-401 transmitter. Simply bind and drive and have fun with your friends thanks to crystal-free 2.4GHz technology Its tiny size is just 35x26mm and only 17mm high, and its extremely light weight of just 13 grams means it won"t affect the weight balance, no matter where it"s installed. The R-401’s PCB features its own silicone jacket within the Hardcase outer for waterproof protection for a true go-anywhere RC experience, allowing you to drive in mud, rain, and snow! And with failsafe protection, you have peace of mind no matter what RC vehicle you drive! MStyle R-401 Receiver Features: Waterproof R-401 receiver works with MStyle T-401 transmitters Digital Frequency-Hopping Spread Spectrum (FHSS) 2.4GHz technology Simple radio binding steps Adjustable built-in Signal loss failsafe Run your RC models kit with other drivers without worrying about frequencies! 4-Channel A built-in light controller on a separate channel will allow for the addition of headlights and taillights on suitable models with the Maverick LED Light Set (#150465) or HPI Warm White LED Kit (#160560) Ideal for electric RC vehicles with a 6V 35mA minimum BEC power input       S-602W Servo This water-resistant servo is ideal for bashers and racers looking for a tough and durable servo that can be used in wet conditions (e.g. rain, snow, puddles). Features: Operating Voltage: 4.8-6V 4.8V: Speed: 0.18 sec/60 degrees, Torque: 6kg-cm 6V: Speed: 0.16 sec/60 degrees, Torque: 7kg-cm Servo Spline: 25T Dimensions: Main case: 40x37.5x20.0mm (excluding mounting tabs, servo spline, & cable outlet) Mounting tab hole centres: 49.5.0x10mm Weight: 46g (excluding servo horn)

679,-

719,-

KJØP
-6%
Genial til Tamiyabiler! Radio og mottaker. NiMh batteri og USB lader. Servo 6kg Dette settet fra MStyle inneholder radio og mottaker, 6kg analog servo og et 7.2V 2000mAh NiMh-batteri og kompatibel lader. Denne pakken vil være genial for den som har et kit eller eldre bil liggene som trenger utstyr.   R/C Set - Radioset with Servo, Battery and Charger   The new R/C set from MStyle is the ultimate package for anyone looking to build or upgrade their R/C car with high-quality electronics. This all-in-one kit provides nearly everything you need to get your vehicle up and running, whether you"re a hobbyist or a seasoned R/C enthusiast.   What’s included in the set: Radio T-401 2.4GHz: A reliable, easy-to-use transmitter offering precise control for your R/C car. Receiver R-401 4Ch 2.4GHz (Waterproof): A durable and waterproof receiver designed to ensure stable connectivity in various conditions. Servo S-602W 6KG: A powerful and responsive servo with a 6kg torque capacity, perfect for handling sharp turns and quick movements. USB NiMh Charger C-U02: A convenient USB charger for recharging your battery quickly and efficiently. 7.2V 2000mAh NiMh Stick Pack (with Tamiya Plug): A high-performance battery that provides the power you need for extended driving sessions.   Whether you’re assembling a new car or upgrading your current one, this set is designed to simplify the process and deliver a premium R/C experience. Get ready to take your R/C car to the next level with MStyle!     Transmitter T-401 The MStyle T-401 4-Channel radio system uses the latest digital 2.4GHz radio technology to give you trouble-free, total control of your RC car. This is a fully featured, lightweight, 4-channel radio with advanced ergonomic features and total adjustability. Thanks to its crystal-free 2.4GHz technology, you will be able to confidently drive with your friends without worrying about things like frequencies or radio conflicts, and the waterproof R-401 receiver allows you to take your RC vehicle anywhere you can dream! The advanced features of the MStyle T-401 let you set the radio up for your car with custom settings like servo reversing, center trim, dual rate and end point adjustments. Only 4 AA batteries are required to power the MStyle T-401, so it"s light in your hands, and the foam steering wheel makes it comfortable to hold. With the built-in failsafe feature, you will be protected just in case the radio transmitter loses its connection with the receiver. MStyle T-401 Radio Features Digital 2.4GHz FHSS technology 4 Channel Digital on and off switch Foam-covered wheel for extra comfort and grip Servo end point adjustments for steering and throttle Servo reversing Steering dual rate Centre trim (steering and throttle) Audible warnings if you leave the MStyle T-401 switched on as well as battery life! Lightweight (only 4 AA batteries required)     Receiver R-401 The R-401 is the latest receiver for the MStyle T-401 transmitter. Simply bind and drive and have fun with your friends thanks to crystal-free 2.4GHz technology Its tiny size is just 35x26mm and only 17mm high, and its extremely light weight of just 13 grams means it won"t affect the weight balance, no matter where it"s installed. The R-401’s PCB features its own silicone jacket within the Hardcase outer for waterproof protection for a true go-anywhere RC experience, allowing you to drive in mud, rain, and snow! And with failsafe protection, you have peace of mind no matter what RC vehicle you drive! MStyle R-401 Receiver Features: Waterproof R-401 receiver works with MStyle T-401 transmitters Digital Frequency-Hopping Spread Spectrum (FHSS) 2.4GHz technology Simple radio binding steps Adjustable built-in Signal loss failsafe Run your RC models kit with other drivers without worrying about frequencies! 4-Channel A built-in light controller on a separate channel will allow for the addition of headlights and taillights on suitable models with the Maverick LED Light Set (#150465) or HPI Warm White LED Kit (#160560) Ideal for electric RC vehicles with a 6V 35mA minimum BEC power input     C-U02 USB Charger This USB Delta-Peak Charger is a simple and easy to use charger for 2-8 Cell NiMH battery packs. A USB Adaptor with an output of at least 2A is recommended. Specifications: 2-8 Cell NiMH (600-2500mAh) Charging range USB input 5V 1A, (2A Recommended) Delta-Peak Charging Tamiya Battery connector     S-602W Servo This water-resistant servo is ideal for bashers and racers looking for a tough and durable servo that can be used in wet conditions (e.g. rain, snow, puddles). Features: Operating Voltage: 4.8-6V 4.8V: Speed: 0.18 sec/60 degrees, Torque: 6kg-cm 6V: Speed: 0.16 sec/60 degrees, Torque: 7kg-cm Servo Spline: 25T Dimensions: Main case: 40x37.5x20.0mm (excluding mounting tabs, servo spline, & cable outlet) Mounting tab hole centres: 49.5.0x10mm Weight: 46g (excluding servo horn)

795,-

895,-

KJØP
-11%
Overgang fra Traxxas female til male Deans (T-Plugg). Bronto RC tilbehør er et must for å komplettere din RC hobby. Kvalitetstilbehør og komponenter perfekt for dine prosjekter.

59,-

KJØP
Traxxas 9136 - Caster blocks (c-hubs), extreme heavy duty, black (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit) Replacement left and right caster blocks (c-hubs) for 9180 and 9181-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts as well as Traxxas aluminum accessories.

99,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png