Hopp til innhold

Traxxas 7093 Gear Set/Transmission VXL

Art.nr: TRX 7093

129,-

Traxxas

Traxxas

På lager: 3

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Transmission Gear Set for use on the
                Traxxas 1/16 E-Revo and Slash VXL Vehicles.


FEATURES: Nylon input and output gears
          Steel idler gear


INCLUDES: 18T Input Gear
          25T Input Gear
          13T Idler Gear
          35T Output Gear
          3x13.75mm Screw Pin


REQUIRES: Installation on the vehicle

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Information Fits: Traxxas Slash (2WD) Traxxas Slash Dakar / Robby Gordon Traxxas Ford F-150 SVT Raptor Traxxas Bandit Traxxas Bandit VXL Traxxas Rustler Traxxas Rustler VXL Traxxas Stampede (2WD) Traxxas Stampede VXL (2WD) Traxxas Skully Traxxas Craniac Traxxas BIGFOOT  

49,-

KJØP
Traxxas 80WT/1000cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, the twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 80WT (1000cSt) Bottle size: 60ml

99,-

109,-

KJØP
-9%
Oil Differential 20m Weight

179,-

KJØP
Oil, differential (1.000.000 weight) (Typically used for center differential)

149,-

KJØP
Oil, differential (100K wt) (0.7 oz (20cc)) Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions, altering the limited slip capability can enhance turning performance for faster exit speeds. FEATURES: 100K weight oil INCLUDES: 0.7oz  (20cc) bottle of oil w/ 1-1/2" pointed fill cap

99,-

109,-

Ikke på lager
-9%
Charge Two Batteries at Once 8-amp Output in Our Fastest, Most Powerful Charger! Charging Solved! Simple. Fast. Just plug in a pair of Traxxas iD batteries and press Start. Traxxas’ exclusive iD technology eliminates complicated charger programming by automatically configuring and optimizing the charge settings for Traxxas iD batteries. The EZ-Peak Dual charges two batteries simultaneously at up to 50 watts (4-amps) each, or switch to High-Output mode to charge a single battery at the maximum 100 watt (8-amps) output. Charging faster means more fun time behind the wheel. You can even charge a NiMH and a LiPo at the same time! The progress bar and audible alerts keep you informed while the advanced high resolution peak detection delivers a perfect charge every time. The EZ-Peak Dual’s Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. Our Most Powerful Charger Faster charging means you get to spend more time behind the wheel. The EZ-Peak Dual puts out a full 100 watts of power that equates to 8-amps of charging horsepower. It’s a twin turbo-equipped charger. Traxxas iD LiPos (4000mAh or higher) charge nearly 2x faster in High Output Mode. The EZ-Peak Dual isn’t just for iD LiPos; the Multi-Chemistry nature of the charger means LiPos and NiMHs can be charged at the same time. Advanced Mode opens the door for backwards compatibility. This allows EZ-Peak Dual to charge any Traxxas Power Cell battery equipped with a first-generation Traxxas High-Current Connectors and Traxxas iD batteries independently or simultaneously. There are two balance ports built into the charger for Traxxas LiPo batteries equipped with external balance leads. Take full advantage of the 8-amp output and experience the pinnacle of charger flexibility and power.   iD Simplicity With iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. EZ-Peak Dual identifies the type of battery and its capacity. EZ-Peak Dual also cuts down on wasted time by eliminating the hassle of programming and using complicated setups. Just plug an iD battery in and press Start. That’s it! Keeping with the simplicity and ease of use, the iD system eliminates fragile balance wires and clunky balance leads. The iD system streamlines the entire charging experience. QUICK FEATURES ON EZ-PEAK DUAL (#2972) CHARGER ­100-Watt output Recognizes Traxxas iD batteries to automatically program and optimize charger settings Charge a NiMH and LiPo at the same time Charge progress indicator Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface Audible alerts Built-in cooling fan Advanced Mode for full manual control of charger settings Legacy support for all Traxxas High-Current Connectors Built-in balance ports for conventional LiPo batteries Charges 5-8-cell NiMH batteries Charges 2S and 3S LiPo batteries EZ-PEAK DUAL (#2972G) SPECIFICATIONS AC Input: 100–240 Volts Charge Current Range: 1.0-4.0A (Dual Mode) or 5.0-8.0A (High Output Mode) (100W Max.) Discharge Current Range: 500 mAh Current Drain For Balance Ports: 500mAh NiMH Battery Cell Count: 5–8 Cells LiPo Cell Count: 2–3 Cells Net Weight: 575 g Dimensions: 176 x 138 x 57 mm  

1.395,-

1.495,-

KJØP
-7%
 This is a package of four 4mm Flanged Locknuts in Green from Traxxas. FEATURES: May be used in any application requiring this size locknut           Serrated rear section ensures sure grip INCLUDES: Four 4mm Flanged Locknuts REQUIRES: 7mm Nut Driver SPECS:    Hex Size: 7mm           Hole Diameter: 4mm

99,-

109,-

KJØP
-9%
This is a 23 Tooth 48 Pitch Pinion Gear By Traxxas FEATURES: Pinion gear with set screw, Silver in color INCLUDES: (1) 23 Tooth 48 Pitch Pinion Gear           (1) One 4mmx2mm set screw REQUIRES: Installation SPECS:    Outer Diameter: 14mm (9/16")           Inner Diameter: 11mm (7/16")

39,-

49,-

KJØP
-20%
This is the Progressive-2 Rocker Arm Post Set for use on the              Traxxas 1/16 scale E-Revo and Slash VXL 4WD Vehicles. FEATURES: Nylon construction           Grey in color INCLUDES: Two Rear Rocker Arm Posts           Two Front Rocker Arm Posts           Eight Nylon Bearings REQUIRES: Installation on the vehicle

65,-

Ikke på lager
This is 30K wt Differential Oil for the Traxxas Revo                   but can be used in other vehicles as well. FEATURES: 30K wt oil INCLUDES: A 1.75 oz  (50cc) bottle of oil w/ 1-1/2" pointed fill cap

99,-

KJØP
High Intensity LED Light Kit for X-Maxx   Rugged Innovation The X-Maxx LED Light Kit is the only light kit worthy of the X-Maxx name. Built to handle brutal real-world punishment, this light kit is waterproof and built Traxxas Tough™ for maximum fun. Blaze a path through the night with this intense-white high-output LED light kit. Traxxas innovation delivers features and performance not found on any other lighting system. The included high voltage amplifier packs the muscle to efficiently power both high-power light bars in the kit while minimizing losses from excessive current and heat. The tightly regulated output provides stable lighting performance, without flickering or dimming as the battery voltage changes. In another Traxxas first, the smart brake lights work when brakes are applied in both forward and reverse directions. This eliminates the common and annoying problem with generic aftermarket systems that turn on the brake lights while reversing.       X-MAXX LED LIGHT KIT (#7885) INCLUDES:   High-output bumper mounted LED light bar Multi-function rear LED light bar High-voltage 8-channel power amplifier for intense, brilliant LED lighting Regulated output for stable lighting performance  (no flickering or dimming as the battery voltage changes) Breakaway cable helps to prevent damage when removing body Light bar mounts and wiring connectors       Wiring is simple: Plug the main connector from the power amplifier into the power port on the Traxxas VXL-8s Electronic Speed Control, and then plug the individual lighting modules into the power amplifier. Switch between three manual lighting modes on the power amplifier (such as high beam and low beam), or use the Traxxas Link app and Wireless Module (#6511*) to control individual lights remotely and create custom lighting configurations. Of course, since it’s from Traxxas, this powerful, feature-rich system is rugged and fully waterproof for all of your exciting RC adventures.   High-Voltage Power Rather than draw valuable power away from the BEC, the power amplifier uses the Power Port on the VXL-8s ESC to tap power directly from the batteries. The power amplifier transforms and regulates battery current to for reliable high-power performance.     Technology Customize your setup with three different lighting modes on the amplifier. Use the Traxxas Link App* to further customize the lighting modes to your specifications or turn the lights on and off directly in the app. The kit includes all mounting hardware to make installation a breeze. The LED Light Bar Kit comes as a complete set or as individual components allowing X-Maxx owners to select the exact setup to meet their needs.     QUICK FEATURES ON X-MAXX LED LIGHT KIT (#7885)   Compatible with Velineon VXL-8s ESC #3496 A Traxxas first! Fully functioning brake lights that work in both forward and reverse direction Fully waterproof Three default lighting modes controlled from the power amplifier Low and high beam brightness settings Easy to install with simplified, concealed, color-coded wiring Expandable Firmware updatable through the app App-controlled lighting functions* Turn lights on/off remotely Build a custom dashboard Customize lighting configurations and actions Add additional lighting components         LED Configuration with Traxxas Link App   MODEL 7885: X-MAXX LED Light Kit *Requires Traxxas Link App (available in the Apple App Store™ or on Google Play™) and TQi transmitter with the Traxxas Link Wireless Module (part #6511, sold separately).

1.195,-

1.395,-

KJØP
-14%
This is the Front Bulkhead for the Traxxas Revo. FEATURES: Black plastic construction           Rocker shafts preinstalled INCLUDES: Front bulkhead halves Part #5330           (2) rocker shafts     Part #5354           (4) 4X14mm button head screws REQUIRES: Installation on the Traxxas Revo

185,-

KJØP
X-Maxx® WideMaxx® Kit     A Tougher, Wider Stance The Traxxas X-Maxx is a new breed of monster truck with a tough-as-nails attitude, brutal power, and unrivaled durability. The WideMaxx kit builds on the X-Maxx’s already legendary performance by widening the stance 60 mm for even greater cornering stability. Take your X-Maxx to the next level with the WideMaxx kit and get ready for the ultimate expression of Traxxas Tough™.   The X-Maxx WideMaxx kit includes extended versions of the extreme heavy-duty suspension arms for a 2.36” (60 mm) wider stance. Molded from our toughest composite material, the new arms offer just enough flex to resist breaking, even in cold weather. Five different color options allow maximum customization of your X-Maxx. New 1.346 rate shock springs replace the standard springs for optimal handing performance. Wider suspension links and steel driveshafts complete the package and X-Maxx's thoughtful engineering makes installation quick and easy.               ­ X-Maxx WideMaxx Quick Features ­ Available in five different color options Widens the X-Maxx by 2.36" (60 mm) for increased cornering stability Extended arms constructed from extreme-duty cold weather compound Kit Includes: Upper suspension arms (4) Lower suspension arms (4) Extended driveshafts (4) WideMaxx toe links (2) New springs (1.346 rate) ­ ­     MODEL 7895: WideMaxx® Kit

2.195,-

2.395,-

KJØP
-8%
 This is the Driveshaft Assembly for use on the                      Traxxas 1/16 Slash VXL FEATURES: Nylon construction           Black in color           Fits left or right INCLUDES: One Fully Assembled Driveshaft Assembly REQUIRES: Installation on the vehicle

99,-

KJØP
These are the Assembled SCT Tires and Wheels for use on the                   Traxxas 1/16 Slash VXL 4WD RTR FEATURES: SCT satin chrome wheels           Red beadlock style           SCT off-road racing tires INCLUDES: One Left and One Right Assembled SCT Tire and Wheel REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 67.4mm (2.7")           Width: 28.5mm (1.1")           Hex: 12mm

229,-

KJØP
This is the Rear Bulkhead for use on the                   Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction, black in color INCLUDES: Two Rear Bulkhead Sections           Four 3 x 10mm Button Head Screws           One 2.5 x 22mm  Socket Head Cap Screw REQUIRES: Installation on the vehicle

79,-

KJØP
This is the Front Bulkhead for use on the                  Traxxas 1/16 scale E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Two front bulkhead halves           Four 3x10mm Button Head Screws           One 2.5x23mm Cap Screw REQUIRES: Installation over front diff assembly  

79,-

KJØP
This is the Chassis for use on the                  Traxxas 1/16 E-Revo, Slash VXL and Rally VXL Vehicles. FEATURES: Nylon construction           Grey in color INCLUDES: One Chassis REQUIRES: Installation on vehicle SPECS:    Length: 245mm (9.6")           Width: 107mm (4.2")           Height: 40mm (1.6")

189,-

Ikke på lager
This is a stock replacement FRONT shock tower for the Traxxas Stampede. FEATURES:    Made from black molded nylon    For the Traxxas Stampede SPECS:    Height: 2 3/4"    Thickness: 1/4"    Width at base: 2 3/4"    Width at top: 2" INCLUDES:    (1) Front shock tower for the Traxxas Stampede

59,-

KJØP
         This is the 45T Spur Gear for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One 45T Spur Gear REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 24.75mm (0.97")           Inner Diameter: 5.5mm (0.22")           Width: 7mm (0.28")

39,-

KJØP
This is the Front and Rear Body Mount Set for the Traxxas VXL. FEATURES: Plastic construction Black in color INCLUDES: One front and rear body mount set REQUIRES: Installation on the Traxxas VXL

49,-

KJØP
Spring, shock (GTR) (3.2 rate, purple) (1/16 Summit) (1 pair)

49,-

KJØP
This is the Battery Compartment Door and Vents for use on                 the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Battery Compartment Door           Two Vents REQUIRES: Installation on the vehicle

59,-

KJØP
These are the optional Pivot Ball Caps for use on the                  Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Hard anodized aluminum with Teflon coating           Replaces stock plastic pivot ball caps INCLUDES: Eight Pivot Ball Caps           5mm Hex Wrench           Instruction Sheet REQUIRES: Installation in hub carriers

259,-

299,-

Ikke på lager
-13%
  Truck Tires on 2.2" Wheels Truck tires mounted on 2.2" black wheels that is a perfect upgrade for your Traxxas 1/16 E-REVO or 1/16 Summit.   Fits: Traxxas 1/16 E-REVO Front & Rear Traxxas 1/16 SUMMIT Front & Rear HPI Savage XS Flux Front & Rear 1/10 Scale Buggies Rear Specs: Wheel diameter: 2.2" Tire Diameter: 92.5 mm Tire Width: 43.5 mm Weight (each): 87 g Hex: 12 mm Tire Compound: Soft Wheel finish: Black Nylon Original Traxxas 1/16 E-REVO Tire info: Diameter: 82 mm Width: 46 mm Total Track Width: 240 mm Traxxas 1/16 E-REVO with Louise ST-Pioneer 2.2" Truck Tires: Total Track Width: 260 mm (+10 mm off-set per wheel) 10.5 mm larger diameter: you may need adjust the vehicle gearing to not overload the motor/esc The added off-set may put more load on the steering servo

269,-

289,-

KJØP
-7%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png