Hopp til innhold

Traxxas 5442 Spring Shock GTR 4.9 Silver Revo (2)

Art.nr: TRX 5442

75,-

Traxxas

Traxxas

På lager: 3

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is a 4.9 Silver (light) Rate Shock Spring for the Traxxas Revo.

FEATURES: Steel construction
          Painted red w/small silver stripe
          4.9 tension rate (Light)

INCLUDES: Two Shock Springs

REQUIRES: Assembly to vehicle

SPECS:    Static Length:  50mm (1.77")
          Wire Diameter: 2.5mm  (.10")

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

This is the replacement Pivot Ball and Dust Cap Boot Set             for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles. FEATURES: Nylon and Rubber Construction           Blue and Black in Color INCLUDES: Four Blue Rubber Pivot Ball Boots           Four Black Dust Boot Retainer           Four Blue Notched Dust Boot Retainer           Four Blue Rubber Boot Plugs           Four nylon Pivot Ball Retainers           Instruction sheet REQUIRES: Two packages needed to complete truck

89,-

99,-

På lager 3
KJØP
-10%
These are the replacement Drive Shaft Boots for                     the Traxxas Nitro Revo Monster Truck. FEATURES: Rubber Construction           Blue in Color INCLUDES: Two Blue Rubber Driveshaft Boots REQUIRES: Assembly onto Vehicle  

29,-

39,-

På lager 4
KJØP
-26%
LouiseRC 3219B Tire & Wheel MT-UPHILL 3,8 Black 0-Offset (2) Fits: Traxxas E-MAXX Brushless Front & Rear Traxxas REVO 3.3 Front & Rear Traxxas E-REVO Brushless Front & Rear Arrma Kraton Front & Rear Arrma Talion Front & Rear Arrma Nero Front & Rear HPI SAVAGE X 4.6 Front & Rear HPI TROPHY Flux 4WD Front & Rear HPI SAVAGE FLUX HP Front & Rear HPI SAVAGE XL Flux Front & Rear Kyosho Psycho Kruiser 4WD Front & Rear Also fits other 1/8 Scale Monster Trucks with 17 mm hex Also fit these Traxxas Trucks if converted with 17 mm hexes - 5353X, 5353G & 5353R: Traxxas E-Maxx Front & Rear TRX 39036-1 Traxxas E-Maxx Front & Rear TRX 39036-4 Traxxas E-REVO Front & Rear TRX 56036-1 Traxxas E-REVO Front & Rear TRX 56036-4 Traxxas T-Maxx 3.3 Front & Rear TRX 4907 Traxxas T-Maxx 3.3 Front & Rear TRX 49077 Traxxas T-Maxx 3.3 Front & Rear TRX 49077-1 Specs: Wheel diameter: 3.8" Tire Diameter: 168 mm Tire Width: 106 mm Weight (each): 467 g Hex: 17 mm Offset: 1/2" Tire Compound: Sport Wheel finish: Black Nylon

559,-

609,-

** Ikke på lager
KJØP
-8%
Axle Carriers for the Traxxas Revo, T-Maxx & E-Maxx Quick Notes: – replaces stock Traxxas #5334 – includes massive oversized bearings! – fits all Revo, e-Revo & Slayer trucks (except the E-Revo 2.0) – fits all modern T-Maxx and E-Maxx trucks running stock 5451X axles  – will not work with 120-LT Long Travel rockers – Traxxas #5356 – matching rear Revo True-Track Kit available – matching rear T/E-Maxx True-Track Kit available Description RPM axle carriers for the Traxxas Revo, Slayer, T-Maxx 2.5R & 3.3 and newer versions of the E-Maxx have been painstakingly redesigned to improve the durability, strength, and reliability of these much-abused parts. Check out this laundry list of features built into each set of RPM Revo carriers: Axle Carriers: Stock replacement – no modifications are needed to bolt them in. Larger bearing bores accept RPM oversized bearings. Included in each kit are two 15mm bearings and two 21mm bearings. The wall thickness around the pillow-balls has been increased by 40% – eliminating split walls! More than 20% more material supports the pillow-balls, preventing them from pulling through. Redesigned reinforcing rib supporting the tie rod mount. Redesigned boot lock tabs making removal of the silicone boots easier. Press-fit bearings in the carrier means reduced movement of the axle in the carrier. Oversized Bearings: Outer bearings are 6x15x5mm (stock is 6x12x4mm). Inner bearings are 12x21x5mm (stock is 12x18x4mm). Wider bearings create an additional 2mm of contact with the axle for smoother, longer running performance. 3mm. larger bearings have balls a full 33% larger than stock! The load ratings of RPM oversized bearings are double that of stock bearings and more than triple the fatigue rating of stock bearings as well! Pillow-Ball Setscrews: Two-piece design uses aluminum and Delrin for the ultimate in holding power under extreme situations. Our aluminum setscrews reduce movement of the pillow-balls in the carrier. Our Delrin bushing caps have more than twice the contact area on the pillow-ball, keeping the pillow-balls locked in place at all times What’s Included: RPM Revo axle carriers are sold with 1 left and 1 right axle carrier, 2 outer 15mm bearings, 2 inner 21mm bearings, 4 aluminum setscrews, 4 Delrin bushing caps, and detailed instructions to help install them on your truck. TWO packages will be needed to complete one vehicle (unless used with the RPM True-Track Rear End Conversion, then one package is all that is needed). Tech Notes: Due to increased material to support the pillow balls from pulling through the carrier, RPM Revo Axle Carriers will not work in conjunction with 120-LT Long Travel rockers (Traxxas #5356). RPM Axle Carriers will not work on the E-Revo 2.0.

449,-

** Ikke på lager
KJØP
         This is a 38T Spur Gear for the Traxxas Revo. FEATURES: Black plastic construction           Three countersunk mounting holes INCLUDES: One 38T spur gear    Part #3954 REQUIRES: Installation on the Traxxas Revo SPECS:    Number of teeth:     38           Diameter:        1.58"      (40mm)           Pitch:           1.0 metric

35,-

Ikke på lager
Ikke på lager
Heavy-duty body clips hold tightly for the intense, high-flying action of our toughest 1/10 scale vehicles. Sold as a pack of 12. FEATURES: Steel construction           Natural polished color INCLUDES: Twelve Body Clips SPECS:    Length: 26mm

39,-

På lager 4
KJØP
  These are the replacement Body Clips for                     the Traxxas Nitro Revo Monster Truck. FEATURES: Metal Construction           Silver in Color           Bent for Easy Removal INCLUDES: Ten Bent Silver Metal Body Clips REQUIRES: Assembly onto Vehicle

39,-

Ikke på lager
Ikke på lager
These are the Diff and Trans Drive Yokes for the Traxxas E-Revo, E-Maxx and T-Maxx FEATURES: Black plastic construction INCLUDES: Two drive yokes           Two 4x15mm Yoke pins REQUIRES: T-Maxx 3.3 SPECS:    Length: 15/16" (23mm)           Diameter: 3/4" (17mm)  

49,-

På lager 3
KJØP
This is the replacement Screw Pin Set for                  the Traxxas Nitro Revo Monster Truck. FEATURES: Metal Construction           Black in Color           Hex Head Design INCLUDES: Six 4mm x 15mm Black Metal Screw Pins. REQUIRES: Assembly onto Vehicle           2mm Hex Wrench. SPECS:    Length (Overall):   15.9mm (0.62")           Length (Threads):    6.0mm (0.23")           Diameter (Threads):  3.9mm (0.15")           Diameter (Shaft):    2.5mm (0.09")

49,-

På lager 3
KJØP
These are Inner Drive Cups for the Traxxas Revo/T-Maxx. FEATURES: Steel construction INCLUDES: Two steel constant velocity driveshafts           Two M4/15 screw pins REQUIRES: Installation onto vehicle. SPECS:    Length: 18mm (.70")           Diameter: 13mm (.51")

99,-

På lager 2
KJØP
These are the 4x16mm Button Head Machine Screws from Traxxas. FEATURES: For use in the Traxxas Revo and also anywhere a screw this size is             required           Steel construction, black in color INCLUDES: Six 4x16mm Button Head Machine Screws REQUIRES: 2.5mm hex wrench SPECS:    Length: 16mm           Diameter: 4mm

39,-

På lager 5
KJØP
Screws, 3x27mm button-head machine (hex drive) (6)

29,-

39,-

På lager 1
KJØP
-26%
This is the Traxxas Link TQi Wireless Module. FEATURES For use with the Traxxas Link app and TQi radio system Compatible with iPhone (4S or later) iPad (3rd gen and later) iPod touch (5th gen and later) iPad mini Allows driver to view real time telemetry with optional sensors (sensors not included) Compatible with Android 4.4 and up or Apple iOS 4.3 and later platforms INCLUDES Traxxas Link TQi Wireless Module 1.5mm Hex Wrench 1.5x5mm Hex Head Screw SPECIFICATIONS Dimensions: 1.2 x 1.8 x 0.42" (31.5 x 46.8 x 10.8mm) Weight: 0.26oz (7.5g)

479,-

529,-

** Ikke på lager
KJØP
-9%
Cover, gear/ 3x12mm CS (1)

39,-

På lager 3
KJØP
Traxxas TQi Telemetry Expander 2.0 and GPS Module 2.0 Conversion Kit! TRAXXAS TELEMETRY EXPANDER KIT (#6553X) FEATURES: Includes receiver data cable (optional data cables available) Installs quickly and easily; no parts to replace or swap Waterproof case keeps the expander safe from the elements Six available ports for connecting additional temperature and voltage sensors Uses GPS and GLONASS global positioning for accurate, real-time speed Speed readout not affected by gear ratio or tire-size Requires the TQi radio system with Wireless Module (#6511), TSM receiver (#6533), Apple device running iOS 7.0 or higher, or Android-equipped device with Android 4.4 and higher, and the Traxxas Link App (latest version available free on Google Play and the App Store) Expanded Innovation Traxxas telemetry changes the game by allowing you to monitor and record real-time data from your vehicle while you drive. The waterproof Telemetry Expander 2.0 includes the GPS Module 2.0 for the most accurate speed possible and accepts up to six additional auto-detectable sensors. The Traxxas Link app automatically recognizes sensors, so setup takes only a few moments! Advanced communication bus technology allows you to connect the telemetry expander to your TSM receiver or to your High-Voltage Power Amplifier, or directly to the VXL-6s and VXL-8s electronic speed controls with optional data cables. Install the Telemetry Expander, choose your sensors, and prepare for an all-new RC driving experience! Important Note The new GPS Module 2.0 (#6551X) and Telemetry Expander 2.0 (#6550X) replace the original Telemetry Expander (#6550) and GPS Module (#6551). The originals are not compatible with the new 2.0 versions.

1.549,-

1.695,-

** Ikke på lager
KJØP
-9%
  Toe links (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4)/ aluminum wrench (1)

439,-

På lager 2
KJØP
M-DRIVE - P1 3.6V 1.3Ah Cordless Hobby Screwdriver This electric powered cordless screwdriver tool is made for wrenching on your radio controlled vehicle or other hobby/model projects. The power tool is equipped with a 3.6V Li-ion battery with a capacity of 1.3Ah that will give you hours of wrenching time. There are four optional sets with Ti-coated bits that are sold separately. Features: Left/right rotation Twistable handle Built in LED light USB charging (max 5V): charger not included - use your own smartphone USB charger or a USB port on your PC. Magnetic 6.35mm (1/4") bits holder Made for RC hobby use CE tested and CE approved (including Declaration of Conformity) Printed manual: Swedish, English, German, French & Finnish Specs: Charge lead: USB (Type-A) to Micro-USB (Micro-B) Bits holder: Magnetic 6.35mm (1/4") hex (bits are sold separately) Battery: Li-ion (18650) 3.6V, 1.3Ah, 4.68Wh Motor: Geared RS-380S Torque: 3.5Nm RPM: 180 Weight: 300g

399,-

** Ikke på lager
KJØP
 This is the set of Traxxas Long GTR Shock Springs                       with 0.892 Blue Compression Rate. FEATURES: Steel construction, white in color           Dab of paint on end of spring indicates compression rate INCLUDES: Two Long 0.892 Blue Rate GTR Shock Springs SPECS:    Length: 1.8" (45mm)           Wire Diameter: 0.043" (1.1mm)

69,-

** Ikke på lager
KJØP
   This is the set of Traxxas Extra Extra Long GTR Shock Springs                     with 0.884 Pink Compression Rate. FEATURES: Steel construction, white in color           Dab of paint on end of spring indicates compression rate INCLUDES: Two Extra Extra Long 0.884 Pink Rate GTR Shock Springs SPECS:    Length: 2.2" (56mm)           Wire Diameter: 0.043" (1.1mm)

59,-

På lager 1
KJØP
These are the Traxxas Telemetry Trigger Magnet Holders,                        Spur Gear/Telemetry Trigger Magnet FEATURES: Black plastic and metal construction INCLUDES: Two different plasting holders           One disk-shaped magnet           Three 8mm screws           Three 10mm screws SPECS:    Magnet diameter: 5mm           Magnet thickness: 2mm

35,-

Ikke på lager
Ikke på lager
This is the Long RPM Sensor for the                    XO-1 On-Road Car from Traxxas. FEATURES: Functions with the Traxxas Link system to display motor RPM INCLUDES: Long RPM Sensor with Zip Tie and 3x4mm Button Head Cap Screws PECS:    Length: 15" (381mm)  

139,-

På lager 3
KJØP
  High-quality HUDY Bearing Oil is used to lubricate bearings for ultra-smooth operation and long lifespan. Very good for use on dusty tracks and carpet tracks because it helps combat the effects of dust and carpet hair contamination. Super thin to help promote quick penetration and fast & easy coverage. Recommended for use immediately after bearing cleaning (e.g. with spray cleaner).       (11)

99,-

Ikke på lager
Ikke på lager
This is the Front and Rear Body Mounts with Body Post for the Traxxas Revo. FEATURES: Black plastic construction           "TRX" logo on front body mount INCLUDES: Front and rear body mounts  Part #5314           Front and rear body post    Part #5314           (4) 2.5X18mm screw pins           (1) 4X10mm button head screw REQUIRES: Installation on the Traxxas Revo

139,-

På lager 1
KJØP
These are the Front and Rear Body Mounts and Posts for use on the                     Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Front Body Mount           One Rear Body Mount           Two Front Body Posts           Two Rear Body Posts REQUIRES: Installation on the vehicle

79,-

På lager 3
KJØP
Disse lagerene er samme størrelse som Tamiya 1510 This is a set of 10x15x4mm Ball Bearings for use on the Traxxas Revo. FEATURES: Steel Construction           Shielded with blue rubber seals INCLUDES: Two Ball Bearings REQUIRES: Assembly to vehicle SPECS:    Inner Diameter: 10mm           Outer Diameter: 15mm           Side Thickness:  4mm COMMENTS: These bearings are used to support the Primary Clutch (one needed).   Tamiya  630    3X6X2.5mm Tamiya  730    3X7X3mm Tamiya  840    4X8X3mm Tamiya  850    5X8X2.5mm Tamiya 1050    5X10X4mm Tamiya 1060    6X10X3mm Tamiya 1150    5X11X4mm Tamiya 1260    6X12X4mm Tamiya 1280    8X12X3.5mm Tamiya 1480    8x14x4mm ??? Tamiya 1510    10X15X4mm Tamiya 1680    8X16X5mm

89,-

99,-

På lager 3
KJØP
-10%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png