Hopp til innhold
Hjem / Reservedeler/Option-parts / Option Parts Biler / Traxxas El-Biler / E-Revo 1/10 Brushless / RPM 80585 Axle Carriers/Oversized Bearings Blue Traxxas Revo

RPM 80585 Axle Carriers/Oversized Bearings Blue Traxxas Revo

Art.nr: 80585

449,-

RPM

RPM
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Axle Carriers for the Traxxas Revo, T-Maxx & E-Maxx

Quick Notes:
– replaces stock Traxxas #5334
– includes massive oversized bearings!
– fits all Revo, e-Revo & Slayer trucks (except the E-Revo 2.0)
– fits all modern T-Maxx and E-Maxx trucks running stock 5451X axles 
– will not work with 120-LT Long Travel rockers – Traxxas #5356
– matching rear Revo True-Track Kit available
– matching rear T/E-Maxx True-Track Kit available

Description

RPM axle carriers for the Traxxas Revo, Slayer, T-Maxx 2.5R & 3.3 and newer versions of the E-Maxx have been painstakingly redesigned to improve the durability, strength, and reliability of these much-abused parts. Check out this laundry list of features built into each set of RPM Revo carriers:

Axle Carriers:

  • Stock replacement – no modifications are needed to bolt them in.
  • Larger bearing bores accept RPM oversized bearings.
  • Included in each kit are two 15mm bearings and two 21mm bearings.
  • The wall thickness around the pillow-balls has been increased by 40% – eliminating split walls!
  • More than 20% more material supports the pillow-balls, preventing them from pulling through.
  • Redesigned reinforcing rib supporting the tie rod mount.
  • Redesigned boot lock tabs making removal of the silicone boots easier.
  • Press-fit bearings in the carrier means reduced movement of the axle in the carrier.

Oversized Bearings:

  • Outer bearings are 6x15x5mm (stock is 6x12x4mm).
  • Inner bearings are 12x21x5mm (stock is 12x18x4mm).
  • Wider bearings create an additional 2mm of contact with the axle for smoother, longer running performance.
  • 3mm. larger bearings have balls a full 33% larger than stock!
  • The load ratings of RPM oversized bearings are double that of stock bearings and more than triple the fatigue rating of stock bearings as well!

Pillow-Ball Setscrews:

  • Two-piece design uses aluminum and Delrin for the ultimate in holding power under extreme situations.
  • Our aluminum setscrews reduce movement of the pillow-balls in the carrier.
  • Our Delrin bushing caps have more than twice the contact area on the pillow-ball, keeping the pillow-balls locked in place at all times

What’s Included: RPM Revo axle carriers are sold with 1 left and 1 right axle carrier, 2 outer 15mm bearings, 2 inner 21mm bearings, 4 aluminum setscrews, 4 Delrin bushing caps, and detailed instructions to help install them on your truck. TWO packages will be needed to complete one vehicle (unless used with the RPM True-Track Rear End Conversion, then one package is all that is needed).

Tech Notes: Due to increased material to support the pillow balls from pulling through the carrier, RPM Revo Axle Carriers will not work in conjunction with 120-LT Long Travel rockers (Traxxas #5356). RPM Axle Carriers will not work on the E-Revo 2.0.

Produsent

RPM

RPM

Kunder kjøpte også

Hovedbilde RPM 80565 True-Track Rear End Kit for Revo 3.3 & Revo ... Hovedbilde RPM 80565 True-Track Rear End Kit for Revo 3.3 & Revo ...
RPM 80565 True-Track Rear End Kit for Revo 3.3 & Revo ...
RPM True-Track Rear End Kit for Revo 3.3 & Revo (old) - Blue Replaces stock Traxxas #5331, #5332 & #5334 Quick Notes: Fits both the Revo 3.3 and E-Revo (does not fit the E-Revo 2.0) Replaces stock Traxxas #5331, #5332 & #5334 32 grams lighter than stock components! Perfect rear toe angles Includes massive oversized bearings Matching Front Left & Front Right A-arms are available Matching Front Axle Carriers are available The RPM True-Track Rear A-arm Conversion Kit for the Revo eliminates some of the biggest headaches associated with toe link rear ends. Rear toe angles are nearly impossible to set accurately and there isn’t a gauge currently made that can accurately identify whether each individual wheel’s toe angle is set correctly in relation to the chassis. The RPM True-Track rear end kit completely eliminates the rear toe links, locking in the rear toe angle at a solid 1.5 degrees per side for a total rear toe-in angle of 3 degrees. By getting rid of the rear toe links, we’ve completely eliminated all rear bump steer! That means the rear toe angle remains consistent throughout the entire range of suspension travel, providing superior rear end tracking regardless of the terrain. Identical to our T/E-Maxx True-Track Kit, the Revo True-Track Kit retains the stock upper pivot ball in the new, ultra beefy RPM axle carrier to allow precise camber adjustments while the lower pivot ball has been eliminated in favor of a rock-solid 4mm diameter hinge pin that locks in the rear toe angles for race winning consistency (hinge pin replacement part #80970). All aspects of the RPM True-Track Conversion Kit have been beefed up for rugged durability and slop free movement throughout its range of travel. Additionally, we’ve incorporated our oversized bearings into the new RPM axle carrier design, providing an additional 2mm more bearing contact with the axle while doubling the bearing load rating & tripling the fatigue rating over the stock bearings. So does all this come at a cost of added weight? The RPM Revo True-Track Rear A-arm Conversion Kit actually weighs LESS than the stock components it replaces! How much less? 16 grams PER SIDE! That’s a total weight loss of 32 grams or 1-1/8 ounces! That means you get perfect rear toe angles, added A-arm strength, bearings that are more durable & longer lasting, an unbeatable breakage warranty and a reduction in weight! What more can anyone ask for? What’s Included: Our Revo True-Track Rear End Kit consists of two upper rear A-arms, two lower rear A-arms, two beefy rear axle carriers, two outer 6x15mm sealed bearings, two inner 12x21mm sealed bearings, two aluminum pivot ball setscrews, two delrin pivot ball bushing cups, two M3x16mm shock mount screws, two 4mm diameter tool steel hinge pins & enough e-clips to get the job done (4 minimum). RPM Recommendations: The RPM True-Track System is designed to match RPM A-arms (Part #80212 & #80215 – Right Side & #70372 & #70375 – Left Side) & Axle Carriers (#80582 & #80585 – 1 package needed) currently available for the Revo. With the True-Track system mounted at the rear and a set of RPM replacement A-arms & Axle Carriers up front, you are assured the best & most indestructible A-arm / Axle Carrier combination possible! To prolong the life of your bearings, RPM recommends the use of our #81170 Bearing Blaster. For accurate camber adjustments, please consider the use of our #70950 Monster Camber Gauge. Tech Notes: These rear end kits work on all earlier versions of the Traxxas Revo (does not fit the Revo 2.0). One kit will complete the entire rear end. These kits will not work in conjunction with Traxxas (#5356) 120-LT Long Travel Rockers.

599,-

KJØP
Hovedbilde Traxxas 5262 Air Filter Pre-Filter Foam Inserts (3)
Traxxas 5262 Air Filter Pre-Filter Foam Inserts (3)
This is a package of three Air Filter/Pre-Filter Foam Inserts  for the Traxxas .20 cu in (3.3cc) racing engine.   FEATURES Constructed of foam and pre-oiled to trap dirt  Pre-Filter for extra filtration   INCLUDES Three Air FIlter Inserts for the Traxxas 3.3 engine   REQUIREMENTS Installing in air filter boot on engine     SPECIFICATIONS  Height: 38mm (1.5")  Diameter: 38mm (1.5")

129,-

139,-

KJØP
-7%
Hovedbilde Integy 3269 Evolution-5 Wing Mount Silver Revo 3.3
Integy 3269 Evolution-5 Wing Mount Silver Revo 3.3
This is the optional Team Integy Evolution 5 Wing Mount                     for use on the Traxxas Revo 3.3. FEATURES: Aluminum construction, anodized silver in color INCLUDES: Assembled Wing Mount Two 3x11.5mm Button Head Screws Two 4x9.5mm Flat Head Screws REQUIRES: Installation on the vehicle

399,-

KJØP
Hovedbilde Traxxas 5263 Foam Air Filter Oil 1.75 oz.
Traxxas 5263 Foam Air Filter Oil 1.75 oz.
This is a 1.75 oz bottle of Air Filter Oil from Traxxas. FEATURES: Used to treat foam air filter elements to increase their filtering             capacity, and extend engine life.           1.75 fluid ounce bottle provides oil for many applications, and is             still small enough to fit easily into a field bag or tool box. INCLUDES: One 1.75 oz bottle of Air Filter Oil           One applicator tip REQUIRES: Working oil into foam air filter element and squeezing out the excess SPECS:    Fluid Ounce: 1.75 oz (50cc)           Bottle Size-            Height:   3.5" (89mm)            Diameter: 1.5" (38mm)

69,-

Ikke på lager
Hovedbilde Traxxas 5446G Wing Exo-Carbon Revo
Traxxas 5446G Wing Exo-Carbon Revo
This is the Exo-Carbon Wing for the Traxxas Revo.                  This part attaches to the rear of the body. FEATURES: Plastic construction, exo-carbon finish wing INCLUDES: One rear wing with decals REQUIRES: Installation on the Revo. SPECS:    Length: 8" (203.2mm)

245,-

KJØP
Hovedbilde Traxxas 5136X Differential Oil Kit Revo
Traxxas 5136X Differential Oil Kit Revo
This is the Diff Oil Kit for the Revo by Traxxas. FEATURES: Three bottles of oil (10K,30K,50K weights). INCLUDES: Three 2oz (59ml) bottles of oil           Three pour spouts

249,-

KJØP
Hovedbilde Traxxas 5186A Mounted Wheelie Bar Tires/Wheels Blue ...
Traxxas 5186A Mounted Wheelie Bar Tires/Wheels Blue ...
These are the Rubber Tires and Wheels for the            Wheelie Bar on the Traxxas  Wheelie Bars. FEATURES: Machined blue aluminum ball bearing equipped wheels           Rubber Tires INCLUDES: Two rubber tires, four 5x8mm ball bearings, two blue aluminum wheels REQUIRES: Attaching to wheelie bar

239,-

259,-

KJØP
-8%
Hovedbilde Traxxas 5472 Wheelie Bar Assembled Revo
Traxxas 5472 Wheelie Bar Assembled Revo
This is the optional Assembled Wheelie Bar for all versions              of the Traxxas Revo except the 1/16 E-Revo. FEATURES: Nylon construction           Black in color INCLUDES: One Assembled Wheelie Bar REQUIRES: Installation on the Traxxas Revo Sjekk : Trx 5186 eller Trx 5186A

249,-

279,-

KJØP
-11%
Hovedbilde Traxxas 3954 Spur Gear 1.0P 38T Revo
Traxxas 3954 Spur Gear 1.0P 38T Revo
         This is a 38T Spur Gear for the Traxxas Revo. FEATURES: Black plastic construction           Three countersunk mounting holes INCLUDES: One 38T spur gear    Part #3954 REQUIRES: Installation on the Traxxas Revo SPECS:    Number of teeth:     38           Diameter:        1.58"      (40mm)           Pitch:           1.0 metric

35,-

Ikke på lager
Hovedbilde Traxxas 5442 Spring Shock GTR 4.9 Silver Revo (2)
Traxxas 5442 Spring Shock GTR 4.9 Silver Revo (2)
This is a 4.9 Silver (light) Rate Shock Spring for the Traxxas Revo. FEATURES: Steel construction           Painted red w/small silver stripe           4.9 tension rate (Light) INCLUDES: Two Shock Springs REQUIRES: Assembly to vehicle SPECS:    Static Length:  50mm (1.77")           Wire Diameter: 2.5mm  (.10")

75,-

KJØP
Hovedbilde Traxxas 5444 Spring Shock GTR 5.9 Rate Blue Revo (2)
Traxxas 5444 Spring Shock GTR 5.9 Rate Blue Revo (2)

75,-

KJØP
Hovedbilde LouiseRC 3219B Tire & Wheel MT-UPHILL 3,8 Black ... Hovedbilde LouiseRC 3219B Tire & Wheel MT-UPHILL 3,8 Black ...
LouiseRC 3219B Tire & Wheel MT-UPHILL 3,8 Black ...
LouiseRC 3219B Tire & Wheel MT-UPHILL 3,8 Black 0-Offset (2) Fits: Traxxas E-MAXX Brushless Front & Rear Traxxas REVO 3.3 Front & Rear Traxxas E-REVO Brushless Front & Rear Arrma Kraton Front & Rear Arrma Talion Front & Rear Arrma Nero Front & Rear HPI SAVAGE X 4.6 Front & Rear HPI TROPHY Flux 4WD Front & Rear HPI SAVAGE FLUX HP Front & Rear HPI SAVAGE XL Flux Front & Rear Kyosho Psycho Kruiser 4WD Front & Rear Also fits other 1/8 Scale Monster Trucks with 17 mm hex Also fit these Traxxas Trucks if converted with 17 mm hexes - 5353X, 5353G & 5353R: Traxxas E-Maxx Front & Rear TRX 39036-1 Traxxas E-Maxx Front & Rear TRX 39036-4 Traxxas E-REVO Front & Rear TRX 56036-1 Traxxas E-REVO Front & Rear TRX 56036-4 Traxxas T-Maxx 3.3 Front & Rear TRX 4907 Traxxas T-Maxx 3.3 Front & Rear TRX 49077 Traxxas T-Maxx 3.3 Front & Rear TRX 49077-1 Specs: Wheel diameter: 3.8" Tire Diameter: 168 mm Tire Width: 106 mm Weight (each): 467 g Hex: 17 mm Offset: 1/2" Tire Compound: Sport Wheel finish: Black Nylon

559,-

609,-

KJØP
-8%
Hovedbilde Traxxas 5446 Wing Black Revo.
Traxxas 5446 Wing Black Revo.
This is the Black Wing for the Traxxas Revo.                  This part attaches to the rear of the body. FEATURES: Plastic construction, black in color INCLUDES: One rear wing with decals REQUIRES: Installation on the Revo. SPECS:    Length: 8" (203.2mm)           Width: 3" (76.2mm)

189,-

KJØP
Hovedbilde Traxxas 5314 Front/Rear Body Mounts w/Posts & Pins ...
Traxxas 5314 Front/Rear Body Mounts w/Posts & Pins ...
This is the Front and Rear Body Mounts with Body Post for the Traxxas Revo. FEATURES: Black plastic construction           "TRX" logo on front body mount INCLUDES: Front and rear body mounts  Part #5314           Front and rear body post    Part #5314           (4) 2.5X18mm screw pins           (1) 4X10mm button head screw REQUIRES: Installation on the Traxxas Revo

139,-

KJØP
Hovedbilde Traxxas 5154 Drive Shaft Steel Constant Velocity ...
Traxxas 5154 Drive Shaft Steel Constant Velocity ...
This is a Steel Driveshaft for the Traxxas Revo/Maxx. FEATURES: Steel construction           Can be used to replace a bent or damaged front center driveshaft INCLUDES: One steel constant-velocity driveshaft REQUIRES: Dust boots and pins (TRX 5129) SPECS:    Length: 5" (128.5mm) between canter of ball ends           Diameter: .19"  (5mm)

129,-

KJØP
Hovedbilde Traxxas 3934 Body Clips (12)
Traxxas 3934 Body Clips (12)
Heavy-duty body clips hold tightly for the intense, high-flying action of our toughest 1/10 scale vehicles. Sold as a pack of 12. FEATURES: Steel construction           Natural polished color INCLUDES: Twelve Body Clips SPECS:    Length: 26mm

39,-

KJØP
Hovedbilde Dusty Motors DMC0011 Dust Protection Cover for E-revo ...
Dusty Motors DMC0011 Dust Protection Cover for E-revo ...
Dusty Motors Dust Protection Cover for Traxxas E-revo & Summit - Black DMC0011 This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to  keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.

359,-

KJØP
Hovedbilde Traxxas 5748 Marine Grease 30cc
Traxxas 5748 Marine Grease 30cc
This is the Traxxas Marine Grease, 30cc FEATURES Roll-up "toothpaste-style" tube   INCLUDES One tube of marine grease compound SPECIFICATIONS  Volume: 1 oz. (30cc)

89,-

99,-

KJØP
-10%
Hovedbilde RPM 70375 Front Left A-Arms Blue Traxxas Summit part ...
RPM 70375 Front Left A-Arms Blue Traxxas Summit part ...
Trykk her for høyre side.   RPM Front Left Blue A-arms for the Traxxas Summit, Revo & E-Revo (1.0) Quick Notes: Fits the Traxxas Summit, Revo & E-Revo (1.0) Replaces stock Traxxas #5332 Matching Front Right A-arms also available Matching True-Track Rear End Conversion Kit available (for the Revo & E-Revo 1.0) In response to repeated customer demands, we have a set of front left A-arms now available for the Traxxas Summit. Our front right A-arms for the Traxxas Revo (reference RPM #80212 & #80215) are already compatible with the Summit but due to the extended T-Lock differential on the left side, our Revo front left A-arms would not fit. That is no longer an issue with these A-arms. With a revamped cross-brace to clear the T-Lock differential, our Summit front left A-arms will allow full suspension travel and significantly improve overall suspension durability. RPM front A-arms for the Traxxas Summit are molded from our indestructible blend of engineering grade nylons for unmatched performance and durability. Every RPM molded part in manufactured in the USA and carries with it a limited lifetime warranty against breakage. If you’re tired of replacing broken stock parts over and over, give RPM a try. INCLUDES Front Upper and Lower Left A-Arms  Instruction Sheet

209,-

KJØP
Hovedbilde RPM 70485 Extended Right Rear A-Arms Blue Summit/Revo ...
RPM 70485 Extended Right Rear A-Arms Blue Summit/Revo ...
RPM Extended* Right Rear A-arms for the Traxxas Summit, Revo & E-Revo - Blue Quick Notes: Replaces Traxxas stock #5327, #5333R & #8633 Stock replacement arms for the Summit & Revo 2.0 Extended replacement arms for the Revo & e-Revo We have received numerous requests for a set of extended rear A-arms to fit the Traxxas Summit and Revo. When you speak, RPM listens. As a result of your requests, our extended rear A-arms for the Traxxas Summit and Revo are now available. RPM extended rear A-arms are designed around our already solid and proven Revo rear A-arm design. That means you get an ultra-lightweight set of A-arms that are nearly indestructible! Each set of RPM extended rear A-arms incorporates all stock geometry including options for either a 10mm or 19mm extension. Tech Notes: RPM Extended Rear A-arms are replacements for Traxxas stock #5327, #5333R & #8633. 6mm bumper mount spacers (not included) and M3 x 16mm screws (not included) may be necessary if installing these in place of standard wheelbase a-arms. Please review the installation instructions via “Downloads” for technical information regarding the installation of these a-arms.

149,-

KJØP
Hovedbilde RPM 70435 Extended Left Rear A-arms Blue Summit/Revo ...
RPM 70435 Extended Left Rear A-arms Blue Summit/Revo ...
RPM Extended* Left Rear A-arms for the Summit, Revo & E-Revo - Blue Quick Notes: Replaces Traxxas stock #5328, #5333R & 8634 Stock replacement arms for the Summit & E-Revo 2.0 Extended replacement arms for the Revo & E-Revo We have received numerous requests for a set of extended rear A-arms to fit the Traxxas Summit and Revo. When you speak, RPM listens. As a result of your requests, our extended rear A-arms for the Traxxas Summit and Revo are now available. RPM extended rear A-arms are designed around our already solid and proven Revo rear A-arm design. That means you get an ultra-lightweight set of A-arms that are nearly indestructible! Each set of RPM extended rear A-arms incorporates all stock geometry including options for either a 10mm or 19mm extension. All RPM molded products are backed by our limited lifetime warranty against breakage and are molded in black or blue. For unmatched performance, reliability you can trust, and unmatched durability, you can’t go wrong with a set of RPM A-arms installed on your ride! Tech Notes: RPM Extended Rear A-arms are replacements for Traxxas stock #5328, #5333R & #8634. 6mm bumper mount spacers (not included) and M3 x 16mm screws (not included) may be necessary if installing these in place of standard wheelbase a-arms. Please review the installation instructions via “Downloads” for technical information regarding the installation of these a-arms.

149,-

KJØP
Hovedbilde Traxxas 5120 Ball Bearings 12x18x4mm Revo (2)
Traxxas 5120 Ball Bearings 12x18x4mm Revo (2)
These are the replacement Wheel Hub Ball Bearings for                    the Traxxas Nitro Revo Monster Truck. FEATURES: Stainless Steel Construction           Blue Rubber Sealed INCLUDES: Two 12mm x 18mm Blue Sealed Stainless Wheel Hub Bearings REQUIRES: Assembly onto Vehicle SPECS:    Outer Diameter: 18mm (0.70")           Inner Diameter: 12mm (0.47")           Thickness:       4mm (0.15") COMMENTS: These are for the Inside of the Wheel Hubs, the Truck Requires           Four Total of these Bearings.

109,-

KJØP
Hovedbilde RPM 80570 Axle Carrier Replacement Bearings Set Revo
RPM 80570 Axle Carrier Replacement Bearings Set Revo
Replacement Bearing Kit for RPM T/E-Maxx 2.5R/3.3, E-Maxx 16.8 and Revo Axle Carriers Quick Notes: – for use with RPM Axle Carriers only – will not work with stock Traxxas or other aftermarket axle carriers – contains 2 – 6x15x5mm outer and 2 – 12x21x5mm inner bearings Description This bearing kit replaces worn out or damaged bearings from the RPM Axle Carrier set for the Traxxas Revo & T-Maxx – 2.5R/3.3 & E-Maxx 16.8 (part numbers 80562, 80565, 80581, 80582, 80585,  80942 & 80945). This kit comes with 2 – 12x21x5mm inner bearings and 2 – 6x15x5mm outer bearings, enough bearings to do two axle carriers. Two kits are required for one complete truck. Tech Notes: This bearing kit will only work with RPM axle carriers for the Traxxas Revo & T-Maxx 2.5R/3.3 & E-Maxx 16.8. It will not work with stock Traxxas Revo axle carriers.    

219,-

KJØP
Hovedbilde Traxxas 5352T Heavy Duty Rebuild Kit Revo/Maxx Trucks
Traxxas 5352T Heavy Duty Rebuild Kit Revo/Maxx Trucks
Traxxas 5352T - Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))

119,-

129,-

KJØP
-8%
Hovedbilde LouiseRC LT3220BH MT-CYCLONE 3,8
LouiseRC LT3220BH MT-CYCLONE 3,8" 1/2-Offset Svart ...
1/2-OFFSET - 4WD FRONT & REAR Fits: Traxxas E-REVO Brushless Front & Rear Traxxas SUMMIT Front & Rear HPI SAVAGE FLUX HP Front & Rear HPI SAVAGE XL Front & Rear HPI SAVAGE X 4.6 Front & Rear Also fits other 1/8 Scale Monster Trucks with 17 mm hex Also fit these Traxxas Trucks if converted with 17 mm hexes Traxxas E-REVO Front & Rear Traxxas E-REVO Front & Rear Also fit these Trucks if you want a wider stance (width): Traxxas E-Maxx Front & Rear (if converting to 17 mm hexes) Traxxas E-Maxx Brushless Front & Rear Traxxas E-REVO Front & Rear (if converting to 17 mm hexes) Traxxas E-REVO Brushless Front & Rear Traxxas REVO 3.3 Front & Rear Traxxas T-Maxx 3.3 Front & Rear (if converting to 17 mm hexes) Arrma Kraton Front & Rear Specs: Wheel diameter: 3.8" Wheel Width: Tire Diameter: Tire Width: Hex: 17 mm Offset: 1/2" Tire Compound: Sport Wheel finish: Black Nylon

539,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png