Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Traxxas Nitro-Biler / T-Maxx Nitro 3.3 2.4ghz / Traxxas 5160 Aluminum Engine Mount T-Maxx 3.3

Traxxas 5160 Aluminum Engine Mount T-Maxx 3.3

Art.nr: TRX 5160

135,-

Traxxas

Traxxas
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Aluminum Engine Mount for the Traxxas 3.3 T-Maxx.

FEATURES: Replaces damaged engine mounts

INCLUDES: Engine mount, eight 3x10mm socket head screws, eight flat washers
            and eight lock washers

REQUIRES: 2mm hex wrench

SPECS:    Length: 2.3"  (57.5mm)
          Width:  1.1"  (28.5mm) at widest point
          Height: 0.79" (20mm)

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Tamiya 87039 R/C Cleaner Spray
Tamiya 87039 R/C Cleaner Spray
Til fjerning av støv, olje og mange andre typer smuss fra radiostyrte biler.

169,-

199,-

KJØP
-15%
Hovedbilde Traxxas 5168 Throttle and Brake Linkage T-Maxx
Traxxas 5168 Throttle and Brake Linkage T-Maxx
Traxxas 5168 Throttle and Brake Linkage T-Maxx Slide carb linkage set (throttle link, brake link, and hardware)

69,-

KJØP
Hovedbilde Traxxas 3147X Fuel line (610mm or 2ft)
Traxxas 3147X Fuel line (610mm or 2ft)
  Fuel line (610mm or 2ft)

49,-

59,-

KJØP
-17%
Hovedbilde Absima 400CPS / 34WT Silicone Shock Oil 60ml
Absima 400CPS / 34WT Silicone Shock Oil 60ml
Features: Viscosity 400CPS / 34WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. ●Scope of delivery : 1 bottle /60ml

79,-

KJØP
Hovedbilde Traxxas 5041 Grease Premium High-Performance 20cc ...
Traxxas 5041 Grease Premium High-Performance 20cc ...
Grease, premium high performance (20cc)

159,-

169,-

KJØP
-6%
Hovedbilde Traxxas 5260 Air Filter Housing T-Maxx
Traxxas 5260 Air Filter Housing T-Maxx
This is the Traxxas Air Filter Housing for the T-Maxx 2.5.  This attaches to the throat of the carburetor.     FEATURES Black plastic air filter housing with cover screen and  and changeable element  Rubber angled neck for filter  Rubber adapter for filter  Zip tie for fastening   INCLUDES One screened filter  One rubber straight neck  One rubber adapter  One zip tie   REQUIREMENTS TRX 2.5 engine or any carburetor that has a 14mm or 13mm outer carb  throat opening   SPECIFICATIONS  Diameter: 1.5" (39mm)  Height: 2.4" (60mm) including rubber adapter  Diameter of carb adapter: 0.53" (13.5mm)  Length of zip tie: 4.7" (120mm)

145,-

KJØP
Hovedbilde Traxxas 4954 Hex Wheel Hubs/Pins T-Maxx (2)
Traxxas 4954 Hex Wheel Hubs/Pins T-Maxx (2)
This is the Set of Hex Wheel Hubs for the Traxxas T-Maxx 4WD RTR Monster Truck.  These wheel hubs fit on the end of the stub axles.     FEATURES Replaces missing or damaged hex wheel hubs  Hubs are made of molded black plastic  Axle pins are steel   INCLUDES Two Hex Wheel Hubs  Two 2.5x12mm axle pins   REQUIREMENTS Inserting pins through stub axles (4953) and placing wheel hubs in  recessed area of axle carriers (4932).

29,-

KJØP
Hovedbilde Traxxas 5170 Recoil Starter TRX 2.5
Traxxas 5170 Recoil Starter TRX 2.5
This is the Recoil Starter for the 2.5 and 3.3 Traxxas engines.     FEATURES Black plastic case   INCLUDES One Recoil Starter  Four 3mm x 12mm cap head screws   REQUIREMENTS 2mm Allen Wrench   SPECIFICATIONS  Mounting Holes center-to-center: 27mm   COMMENTS This part is for the recoil unit only  Screws have thread-locking compound pre-applied

269,-

KJØP
Hovedbilde Traxxas 5189 Screw Pins 4x13mm w/Threadlock (4)
Traxxas 5189 Screw Pins 4x13mm w/Threadlock (4)
  These are the 4x13mm Screw Pins for              the Traxxas T-Maxx 3.3 4WD Nitro Monster Truck RTR. FEATURES: Metal Construction           Black in Color           Hex Head Design           Threadlock INCLUDES: Four 4mm x 13mm Black Metal Screw Pins REQUIRES: Assembly onto Vehicle SPECS:    Length (Overall): 13mm (0.51")           Length (Threads): 4.25mm (0.17")           Diameter (Threads): 4mm (0.16")           Diameter (Shaft): 2.5mm (0.098")

49,-

KJØP
Hovedbilde Traxxas 4917R Shock Tower Rectangular Body Posts F/R
Traxxas 4917R Shock Tower Rectangular Body Posts F/R
This is the Shock Tower for the all versions of the Traxxas Maxx.                      This is for rectangular body posts. FEATURES: Plastic construction INCLUDES: (1) Shock Tower REQUIRES: Installation SPECS:    Width: 4.15" (105.5mm)           Height: 2.3" (58.5mm)           Thickness: 0.323" (8.2mm)

59,-

KJØP
Hovedbilde Traxxas 5161 Suspension Screw Pin Set
Traxxas 5161 Suspension Screw Pin Set
This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3 and E-Maxx. FEATURES: Steel construction           Silver in color INCLUDES: Two 59mm screw pins.           Four 73mm screw pins.           Two 65mm screw pins

109,-

KJØP
Hovedbilde RPM 80472 Rod Ends Short Black 1/10 Traxxas
RPM 80472 Rod Ends Short Black 1/10 Traxxas
Short Rod Ends for most Traxxas 1:10 Scale Vehicles Quick Notes: – RPM short rod ends replace Traxxas stock #5347 – requires stock Traxxas pivot balls Description The same engineering that made RPM Rod Ends for Associated and Losi vehicles some our best selling RPM parts for over 2 decades has gone into the creation of RPM Rod Ends for Traxxas 1/10th scale vehicles. These rod ends are tough! The area around the ball stud is thicker than the stock rod end while still allowing a full range of motion of the pivot ball. Additionally, the shank has been redesigned with a pair of flats, making the rod end much easier to work with (versus the stock, round shank). RPM rod ends are sold in sets of twelve to complete most vehicle needs. RPM Rod Ends cover a wide range of currently available Traxxas vehicles including all versions of the following: Slash 2wd, Slash 4×4, Summit, T-Maxx, E-Maxx, Revo, e-Revo, Slayer Pro 4×4, Stampede 4×4, Rustler VXL, Jato and Bandit VXL. Tech Notes: RPM short rod ends replace Traxxas stock #5347. Sold without pivot balls. Stock Traxxas pivot balls are required for completion.    

119,-

KJØP
Hovedbilde Traxxas 4948 Fuel Tank 125cc
Traxxas 4948 Fuel Tank 125cc
Fuel Tank 125cc

179,-

KJØP
Hovedbilde RPM 81062 Front Bulkheads T/E-Maxx Black
RPM 81062 Front Bulkheads T/E-Maxx Black
Front Bulkheads for the Traxxas T-Maxx & E-Maxx Quick Notes: – fits all versions of the Traxxas T-Maxx & E-Maxx line of trucks – replaces stock Traxxas #4930R & #4930X Description Until now, the Traxxas T-Maxx and E-Maxx line of trucks has been missing a key link in the chain of RPM durability – the bulkheads. We’ve heard numerous complaints over the years requesting RPM bulkheads for these beasts and, with some creative engineering, we’ve found a way to solve common bulkhead breakage issues. Each RPM bulkhead starts with the RPM trademark blend of incredibly strong nylons. From there, we redesigned key areas to improve impact resistance but the most significant change comes in the form of lock nuts. After extensive testing and review of damaged stock bulkheads, we found that the most common reason stock bulkheads break is from the mounting screws backing out. Our solution was to incorporate a series of lock nuts at the chassis and skid plate mounting holes to securely lock the bulkheads in place. Once the bulkhead is secure, our materials and design changes take over for the strongest, lightest and most durable set of aftermarket bulkheads currently available! RPM front bulkheads are so light, that they weigh less than the stock parts they replace. Combined a set of RPM Rear Bulkheads with these front versions for the ultimate in strength and durability Tech Notes: RPM T-Maxx & E-Maxx bulkheads are stock replacement parts and fit all versions of these trucks, from the original T-Maxx 1.5 to the most modern versions of the 3.3 T-Maxx and Brushless edition E-Maxx.    

199,-

KJØP
Hovedbilde RPM 81072 Rear Bulkheads T/E-Maxx Black
RPM 81072 Rear Bulkheads T/E-Maxx Black
Rear Bulkheads for the Traxxas T-Maxx & E-Maxx Quick Notes: – fits all versions of the Traxxas T-Maxx & E-Maxx line of trucks – replaces stock Traxxas #4929R & #4929X – Front Bulkheads also available Description RPM Rear Bulkheads for the T-Maxx & E-Maxx, combined with our Front Bulkheads, are available to further improve the durability of these awesome monster trucks! Each RPM rear bulkhead follows the same design criteria we used to build our front bulkheads – superior materials, impact resistant design changes and lock-nuts to help prevent critical screws from backing out. All this in a part that weighs exactly the same as the stock rear bulkheads Tech Notes: RPM T-Maxx & E-Maxx bulkheads are stock replacement parts and fit all versions of these trucks, from the original T-Maxx 1.5 to the most modern versions of the 3.3 T-Maxx and Brushless edition E-Maxx.    

189,-

KJØP
Hovedbilde Traxxas 4963 Chassis Braces
Traxxas 4963 Chassis Braces
 These are the Chassis Braces for the        Traxxas New T-Maxx 4908 3.3 4WD Nitro Monster Truck RTR FEATURES: Nylon construction, black in color Replaces worn or damaged chassis braces INCLUDES: One Set of Chassis Braces REQUIRES: Installation following the model manual SPECS: Length: 243mm (9.57")

99,-

KJØP
Hovedbilde Traxxas 5141 Turnbuckles/Toe Links Front (2)
Traxxas 5141 Turnbuckles/Toe Links Front (2)
These are the Front Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx FEATURES: Constructed of steel, polished natural finish INCLUDES: Two Front Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx. REQUIRES: Installing between wheel hubs and front bulkheads SPECS:    Length: 4.7" (120mm)           Diameter: 0.20" (5mm) COMMENTS: Fits only the 3.3 version of the T-Maxx.

119,-

KJØP
Hovedbilde Traxxas 4935 Bumpers Front & Rear T-Maxx
Traxxas 4935 Bumpers Front & Rear T-Maxx
These are the Front and Rear Bumpers for the          Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks. These bumpers attach to the bumper mounts at the front & rear of the chassis. FEATURES: Replaces stock plastic bumpers.           Constructed of molded silver colored plastic. INCLUDES: One dual-tube front bumper           One dual-tube rear bumper REQUIRES: Fastening each bumper to the bumper mounts (4936) with four 3x12mm             buttonhead cap screws (not included).

75,-

KJØP
Hovedbilde Traxxas 4937 Front Skid Plate T-Maxx
Traxxas 4937 Front Skid Plate T-Maxx
This is the Front Skidplate for the Traxxas T-Maxx Monster Truck.   This skidplate bolts to the Chassis (key #4922) and the Bulkheads key #4930               and provides protection to the front differential. FEATURES: Skidplate is constructed of high impact molded black plastic.           Front of skidplate kicks up at about 45 degrees to shield the             differential from crash damage or hard landings from jumps.           Stainless steel mounting plate provides rigid mounting surface. INCLUDES: One plastic front skidplate           One stainless steel mounting plate. REQUIRES: Installing on chassis with four 3x10mm countersunk machine screws             (not included, use TRX 2552)  

69,-

KJØP
Hovedbilde Traxxas 4938A Skid Plate Rear Plastic Gray
Traxxas 4938A Skid Plate Rear Plastic Gray
This is the Rear Plastic Skidplate for the T-Maxx 3.3 and E-Maxx. FEATURES: Attaches to and protects chassis and supports the rear bulkhead           Skidplate is gray in color INCLUDES: Skidplate and stainless steel plate

75,-

KJØP
Hovedbilde Traxxas 4945 Steering Bellcranks E-Maxx
Traxxas 4945 Steering Bellcranks E-Maxx
This is the replacement Steering Bellcrank Set for the Traxxas                            #3903 & 3908 E-Maxx.         FEATURES: Composite nylon construction, black in color           Replaces a worn or damaged bellcrank set INCLUDES: One Left Bellcrank Lower           One Left Bellcrank Upper           One Right Bellcrank           One Draglink           One Spring Cap           One Servo Saver Spring           Two 3x12mm Shoulder Screws (2.5mm hex size)           Six 3x15 Button Head Cap Screws (2mm hex size)           One Black Nylon Spacer           Two White Nylon Spacer REQUIRES: Assembly and installation following the model manual (a installation            sheet is included for T-Maxx and #3906 E-Maxx installations)

149,-

KJØP
Hovedbilde Traxxas 4122 Clutch Bell Steel 22T
Traxxas 4122 Clutch Bell Steel 22T
This is the Traxxas 22 Tooth Steel Replacement Clutch Bell.         This clutch bell attaches to the adapter unit on the crankshaft,        makes contact with the clutch shoes and meshes with the main gear.   FEATURES: Fits all Traxxas 1/10th scale Nitro Vehicles.           Replaces worn or damaged clutch bells.           Constructed of hardened steel.   INCLUDES: One Traxxas 22 Tooth Steel Replacement Clutch Bell.           Two 5mm x 11mm 0.5mm fiber washers.           Two 5mm E-clips.   REQUIRES: Disassembly of flywheel, clutch shoes, and adapter unit.           Two 5mm x 11mm bearings

149,-

KJØP
Hovedbilde Traxxas 5147X Nuts 5mm Flanged Nylon Locking E-Maxx
Traxxas 5147X Nuts 5mm Flanged Nylon Locking E-Maxx
This is a package of 5mm Flanged Nylon Locking Nuts from Traxxas. FEATURES: Constructed of steel with serrated flange area for sure grip           Nylon insert INCLUDES: Eight 5mm Flanged Nylon Locking Nuts REQUIRES: 8mm nut drivers SPECS:    Hex Size: 8mm           Inner Diameter: 5mm

49,-

59,-

KJØP
-17%
Hovedbilde Traxxas 4472 Spur Gear 32P 72T Rustler
Traxxas 4472 Spur Gear 32P 72T Rustler
This is the Replacement 72 Spur Gear for the  Traxxas Nitro Rustler and Nitro T-Maxx Trucks.     FEATURES Black plastic, slipper clutch style spur gear.   INCLUDES One 72 tooth spur gear   REQUIREMENTS  The other parts of that make up the slipper clutch are:  #1994 - tension spring   #4625 - pressure plate   #4622 - pressure rings   #4685 - friction pegs  #4185 - top gear shaft to slipper adapter   SPECIFICATIONS  Tooth: 72  Pitch: 32

45,-

KJØP
Hovedbilde Traxxas 4581 Glow Plug Lead Wire Blue T-Maxx
Traxxas 4581 Glow Plug Lead Wire Blue T-Maxx
This is the Glow Plug Lead Wire for the T-Maxx Truck Kit.    This wire that is attached to the glow plug that heats it while starting. FEATURES: This is a blue silicone wire.           It has one bullet connector soldered on one end of wire. INCLUDES: One blue glow plug lead wire with bullet connector. COMMENTS: Designed for use only with the EZ Start System.

29,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png