Hopp til innhold

Traxxas 4581 Glow Plug Lead Wire Blue T-Maxx

Art.nr: TRX 4581

29,-

Traxxas

Traxxas

På lager: 1

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Glow Plug Lead Wire for the T-Maxx Truck Kit.
   This wire that is attached to the glow plug that heats it while starting.

FEATURES: This is a blue silicone wire.
          It has one bullet connector soldered on one end of wire.

INCLUDES: One blue glow plug lead wire with bullet connector.

COMMENTS: Designed for use only with the EZ Start System.

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Spare parts for Savage HD 2 Speed transmission gear (#87227)   Spare part for the HPI #87227 Heavy-Duty Transmission Gear 39T for all Savage 2 speed transmissions.

69,-

** Ikke på lager
KJØP
This is the Traxxas 24 Tooth Steel Clutch Bell. This clutch bell attaches to the adapter unit on the crankshaft, makes contact with the clutch shoes and meshes with the main gear. FEATURES Fits all Traxxas 1/10 scale nitro vehicles including the 3.3 version of the T-Maxx Constructed of hardened steel INCLUDES One Traxxas 24 Tooth Steel Clutch Bell Two 5mm x 8mm 0.5mm fiber washers Two 5mm E-clips REQUIREMENTS Disassembly of flywheel, clutch shoes, and adapter unit. Two 5mm x 11mm bearings

149,-

På lager 1
KJØP
Car Type: Truck Scale: 1/10 , 1/8 Length: 479 mm Height: 131 mm Wheel base: 288 mm Width: 156 mm Painted: No Also Including: Decals

249,-

279,-

På lager 1
KJØP
-11%
Dust boot, throttle (2)/ return spring (TRX® 2.5, 2.5R, 3.3)

49,-

59,-

På lager 1
KJØP
-17%
Glow Plug LC4 (Long-reach)

119,-

129,-

** Ikke på lager
KJØP
-8%
Kvalitets gløder med lader, den har også ett analogt meter for å vise pluggens tilstand. Laderen lader med 350 mA, og lader gløderen opp på 5 timer.

329,-

399,-

På lager 5
KJØP
-18%
Glow Plug Wrench Universal (7/8mm) This versatile tool features a specially bent shaft that makes accessing certain nuts much easier. One end has a 8mm wrench that fits standard glow plugs and the wheel nuts. The other end has a 7mm wrench that fits the slipper clutch nut and most 4mm I/D nylon lock nuts.

29,-

På lager 4
KJØP
This is the Blue Silicone Pipe Coupler for the T-Maxx 2.5 This goes between the tuned pipe and the header FEATURES Blue silicone construction For use with pipes #5152 and #4452 INCLUDES One pipe coupler REQUIREMENTS Installing on the vehicle with wire ties SPECIFICATIONS Length: 21mm Diameter: 11.5mm ID & 17.5mm OD (small end) 15.8mm ID & 21.5mm OD (large end)

25,-

På lager 1
KJØP
This is the High Volume Air Filter Body  for the Traxxas Maxx Trucks.     FEATURES Replaces damaged or dirty air filter assemblies  Plastic body with foam element and rubber attachment hose   INCLUDES Foam filter and pre filter, support cap, filter base and wire mount  and instruction sheet   REQUIREMENTS Air filter oil   SPECIFICATIONS  Total Height: 3.9" (100mm)  Filter Diameter: 1.6" (41mm)

169,-

På lager 2
KJØP
Disse passer for Begge E-Maxx`ene og T-Maxx 3.3. These are the Upper Suspension Arms for the T-Maxx 3.3. FEATURES: Fastens to bulkhead and helps to support axle carriers           Black in color, constructed of hardened plastic INCLUDES: One Right and one Left Upper Suspension Arm for the T-Maxx 3.3 REQUIRES: Fastening to chassis COMMENTS: For the 3.3 version only.

89,-

På lager 1
KJØP
This is the Connecting Rod for the Traxxas 2.5 and 3.3 Engine.  This part connects the piston to the crankshaft.     FEATURES Aluminum construction  Pre-installed bushing   INCLUDES One connecting rod   REQUIREMENTS Installation into engine.   SPECIFICATIONS  Length: 37mm (1.46")  Thickness: 3mm (0.12")

399,-

449,-

På lager 2
KJØP
-11%
Merk!!  Denne har 14mm hex!   This is a pair of 3.8" Tires and Hurricane Chrome Wheels                           for the Traxxas E-Maxx or E-Revo 1/10 and T-Maxx FEATURES: Fits all Traxxas vehicles in the Revo and Maxx series           Five spoke chrome plated plastic wheels with premounted tires and             foam inserts INCLUDES: Two 3.8" Tires and foam inserts, TRX 4973           Two Hurricane Chrome Wheels, TRX 5373 REQUIRES: Installing on wheels with Tire Glue. SPECS:      Tires-                          Wheels-           Width: 3.8" (96mm)              Diameter: 3.8" (96.5mm)           Height: 3.3"  (84mm)            Width:    2.7" (70mm)           Outer Diameter: 6.3" (160mm)    Hex Size: 14mm  

459,-

489,-

På lager 3
KJØP
-6%
These are the Front and Rear Bumpers for the          Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks. These bumpers attach to the bumper mounts at the front & rear of the chassis. FEATURES: Replaces stock plastic bumpers.           Constructed of molded silver colored plastic. INCLUDES: One dual-tube front bumper           One dual-tube rear bumper REQUIRES: Fastening each bumper to the bumper mounts (4936) with four 3x12mm             buttonhead cap screws (not included).

75,-

På lager 3
KJØP
  This is the Replacment High Torque Servo for the Traxxas T-Maxx and E-Maxx         or any other vehicle that you would like to mount this in.   This part goes between the receiver and hooks to the steering or motor or                engine to provide the power to either of these. FEATURES: Yields Increased Power and Speed. INCLUDES: One High Torque Servo with J style connector. REQUIRES: Mounting into vehicle. SPECS:    Length:  1.6" (40.5mm)           Width:   .8"  (20.5mm)           Height:  1.43" (36mm)           Torq:    80 oz/in           Weight:  1.58oz (45g)

389,-

419,-

På lager 3
KJØP
-7%
These are Replacement Clutch Shoes for the Traxxas T-Maxx.           These mount to the flywheel and engage the clutch. FEATURES: Carbon Construction           Black in Color INCLUDES: Two Clutch Shoes           One Spring REQUIRES: Assembly into the clutch system.

95,-

På lager 1
KJØP
   These are the Center Half Shafts for the Traxxas Revo 3.3. FEATURES: Constructed of hardened plastic           For front and rear driveshafts INCLUDES: Two external splined shafts           Two internal splined shafts REQUIRES: Installing between yokes on each drive shaft assembly SPECS:    Length: 1.9" (48.2mm)

55,-

På lager 2
KJØP
Piston/sleeve (matched set), wrist pin clips(2) (TRX 3.3)

849,-

899,-

På lager 1
KJØP
-6%
This is the Carburetor Body, Fuel Inlet Plug, and three O-Rings  for the Traxxas 2.5 engine.   FEATURES Carb body constructed of composite material, inlet plug is aluminum,  and O-rings are rubber   INCLUDES One Carburetor Body, Fuel Inlet Plug, and three O-Rings for the  Traxxas 2.5 engine   REQUIREMENTS Installing all carburetor components into carb body   SPECIFICATIONS  Height: 1.4" (35.5mm) including outlet and intake horns  Outlet Diameter: 0.53" (13.5mm)  Intake Diameter: 0.51" (13mm)   COMMENTS This carb body is for the Traxxas 2.5 engine only

189,-

På lager 1
KJØP
Linkage Kit (Throttle & Brake) Revo/ Slayer Pro Linkage set, throttle & brake, Revo-Slayer (includes servo horns, rod guides, brake spring, brake adjustment dial, brake lever, rods (wires), bellcrank, throttle return spring, hardware)

89,-

På lager 2
KJØP
Traxxas 5292 Shims Cooling Head TRX 3.3 (3) Gaskets, cooling head: 0.20, 0.30, 0.40mm (1 each) (0.30mm stock) (TRX 3.3)

49,-

59,-

På lager 2
KJØP
-17%
This is the Air Filter Set  for the Traxxas Nitro Jato Stadium Truck.     FEATURES Plastic construction  Black in color   INCLUDES One Air Filter Housing  One Foam Insert Element  One Rubber Filter Base  One Cable Tie   SPECIFICATIONS  Diameter at Mounting Base: 0.55" (14mm)  Diameter of Outer Housing: 1.6" (40mm)  Height Including Mounting Base 1.62" (42mm)   REQUIREMENTS Assembly onto carburetor

149,-

På lager 1
KJØP
Battery holder, 4-cell/ on-off switch

69,-

På lager 4
KJØP
This is the stock replacement Quick Connector set for the Traxxas EZ Start. FEATURES: All wires included in an EZ starting system INCLUDES: One complete Wire Set with connectors           Two zip ties           One adhesive foam pad REQUIRES: The remainder of the EZ Starting system. COMMENTS: This does not include the connector and box which attaches to the             7.2V battery pack for use on the EZ starting system.

69,-

79,-

** Ikke på lager
KJØP
-13%
BODY CLIPS SECURITY SMALL (4 PCS)       (14)

39,-

På lager 4
KJØP
 This is the Replacement Roller Clutch for the T-Maxx 2.5.            This is located at the EZ Start end of the crankshaft.                  This is the One Way bearing for the starter FEATURES: Steel construction   INCLUDES: One roller clutch   REQUIRES: Nothing.  This is a direct replacement part.   SPECS:    Length: 12mm (0.47")           Inner diameter: 6mm

289,-

På lager 2
KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png