Hopp til innhold

Traxxas 2087X Gear Set for Servo 2085X/2085XL

Art.nr: TRX 2087X

359,-

Traxxas

Traxxas

På lager: 1

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Traxxas 2087X Gear Set for Servo 2085X/2085XL

Restore the performance of your 2085X or 2085XL servo with this replacement metal gear set. You can also use this gear set to upgrade the standard 2085 servo to an all-metal gear train (must swap all gears).

Bearings not included.

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 2085
Copied
Dette er en servo med plast tannhjul så vi i SamiRC anbefaler at du heller tar TRX 2085RL   This is the High-Torque Digital Waterproof Steering Servofor the Traxxas X-Maxx Monster Truck. FEATURES Ball bearing equipped Preinstalled aluminum heat sink to help dissipate heat and prolong servo life INCLUDES High-Torque Digital Waterproof Steering Servo with Wire Lead and Connector SPECIFICATIONS Torque: 365oz/in Speed: 0.17 sec/60° @ 6V Dimensions: 1.97 x 2.0 x 0.98" (50 x 51.5 x 24.9mm) not including heat sink Weight: 3.6oz (103g) including heat sink

829,-

899,-

På lager 1
KJØP
-8%
Art.nr: TRX 2085X
Copied
This is the optional High-Torque Digital Metal Gear Steering Servo, Servo Saver Spring, and Steering Link for the Traxxas X-Maxx Monster Truck. FEATURES 23% more torque that stock replacement servo Ball bearing equipped Full metal gears Stiffer servo saver spring Adjustable steel steering linkage rod Aluminum heat sink center case to help dissipate heat and prolong servo life INCLUDES High-Torque Digital Waterproof Steering Servo Steering Linkage Rod with Ball Ends Servo Saver Spring SPECIFICATIONS Dimensions: 1.97 x 2.0 x 0.98" (50 x 51.5 x 24.9mm) not including heat sink

1.399,-

Ikke på lager

Kunder kjøpte også

Traxxas 2085R - High Torque Servo for X-Maxx, XRT & Maxx Traxxas' Most Powerful Servo Upgrade for X-Trucks & MAXX! 2085R Specs & Features: High Torque: 46.8kg/cm (78% more torque than stock 2085) High Speed: 0.13 sec/60° (30% faster than stock 2085) All metal gears with steel output gear and spline Blue-anodized aluminum center case Dual ball bearings Includes metal steering link and heavy duty servo saver spring Fits X-Maxx, XRT, and Maxx

1.599,-

Kontakt oss for mer informasjon om dette produktet
Washers, motor mount, aluminum (blue-anodized) (4)/ 4x18mm BCS (4)

79,-

89,-

På lager 2
KJØP
-11%
Traxxas X-Maxx Heavy-Duty Roof Skid - Black Skid plate, roof (body) (black)/ 3x15mm CS (4) (requires #7713X to mount) Just like our heavy-duty suspension arms, new X-Maxx roof skid plates use our toughest composite material. Whether you’re sending it at the skate park, or launching from a ramp, these parts are built with just the right amount of flex to resist breakage--even in cold weather! These important accessories protect the roof during rollovers.

129,-

139,-

** Ikke på lager
KJØP
-7%
Speed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm, 2.5mm, 3.0mm), 1/4" drive

469,-

549,-

På lager 2
KJØP
-15%
WL-144010.2159 2.5x47.5PM D6 Screw Set 4pcs  

39,-

På lager 2
KJØP
  Traxxas Ultra Premium Tire Glue Ultra Premium Tire Glue (#6468) with packageOnly one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand incredible centrifugal forces at speeds in excess of 100mph. No other glue endures such high loads, which makes Traxxas Ultra Premium Tire Glue the ultimate adhesive for any tire and rim combination (and any other application that requires a high-strength bond).  To preserve the maximum bonding power of Traxxas Ultra Premium Tire Glue, its bottle is specially designed to maintain a tight seal and prevent clogging. The bottle and nozzle are made of glue-resistant material, and a pin integrated into the tightly-fitting screw-on cap assures glue won't clog the bottle tip. The tip's fine opening allows precise glue application every time you reach for Traxxas Ultra Premium Tire Glue. Traxxas Ultra Premium Tire Glue is custom-blended exclusively for Traxxas. There simply is no better bond for high-speed, high-power vehicles. Traxxas Ultra Premium Tire Glue Features:   The only glue Traxxas Certified for the 100+mph XO-1 Highest-quality cyanoacrylate (CA) glue available Fine tip opening for precise glue application Tightly-fitting cap with sealing pin Glue-resistant bottle and tip material Includes two precision application tips Content 20gr    

139,-

159,-

På lager 5
KJØP
-13%
  Louise X-UPHILL - X-MAXX Tires - FRONT & REAR Truck tires for the high performance Traxxas X-MAXX. The new X-UPHILL tire has the new incorporated MFT technology that is engineered to limit tire expansion (normally refered to as "balooning"). They are mounted on a new very sturdy black nylon 7-spoke wheels with a X-Maxx specific 24 mm hex. The X-UPHILL tire is a good allround tire for most rough surfaces including grass and hard-packed clay! Micro Fiber Tech Features (MFT): New innovation and technlogy Reduces over balooning More ridgid overall tire structure Less distorsion/flex Stable and even contact with the road surface - more grip and longer tire life Fits: Traxxas X-MAXX 6s Traxxas X-MAXX 8s (Also may fit other trucks with 24 mm hexes) Specs: Micro Fiber Tech system (MFT) Wheel diameter: Tire Diameter: 213 mm Tire Width: 98.2 mm Weight (each): Hex: X-Maxx 24 mm Tire Compound: Sport Wheel finish: Black Nylon

699,-

749,-

På lager 1
KJØP
-7%
Steering link, steel/ servo saver spring, heavy duty (use with #2085X metal gear servo)

99,-

På lager 4
KJØP
Features: Viscosity 100000CPS / 24846WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears.  1 bottle /60ml

159,-

På lager 3
KJØP
vThis is the Ring Gear  for the Traxxas X-Maxx Monster Truck     FEATURES Hardened steel construction  Fits front and rear differentials   INCLUDES Ring Gear

99,-

På lager 5
KJØP
Servo horn, steering, metal/ 3x14 BCS (1) Spline: 25T

79,-

På lager 1
KJØP
Center drive, torque-biasing (assembled)/ 17x26x5 ball bearings (2) (requires #7727X bulkheads)

849,-

På lager 2
KJØP
Heavy duty steel 11-tooth pinion gear for X-Maxx rear differential. For use with #7792 35-tooth heavy duty differential ring gear.

109,-

119,-

** Ikke på lager
KJØP
-8%
X-Maxx rear upper and lower bulkhead for use with 8s Torque-Biasing Center Drive™. Replaces #7727 and #7728, and requires (2) #5108 ball bearings to complete installation.

239,-

269,-

Kontakt oss for mer informasjon om dette produktet
Ikke på lager
-11%
Ring gear, differential, 35-tooth (heavy duty) (use with #7790, #7791 11-tooth differential pinion gears)

139,-

159,-

På lager 2
KJØP
-13%
This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application. Includes: 1- tube of grease (approximately 1 oz.)

29,-

Ikke på lager
Ikke på lager
RPM Oversized Rear Axle Carriers for X-Maxx (Outer Bearings Not Included) Replaces stock Traxxas #7752 Quick Notes: Replaces stock Traxxas #7752 Includes two oversized inner rear bearings (20x32x7mm) Outer bearings not included (stock bearings are used) Sold in pairs (1 – left and 1 – right) RPM Oversized Rear Axle Carriers for the Traxxas X-Maxx were designed to solve two key issues reported by owners of these massive beasts. The first being durability. We designed these carriers to handle some serious abuse. RPM Oversized Axle Carriers are BEEFY, with massive support ribs for the strongest possible carriers available. The other area of improvement comes in the form of larger inner bearings. How large? MASSIVE! The stock inner bearings are a mere 20x27x4mm. The oversized bearings we use are gigantic 20x32x7mm bearings! That’s 5mm larger on the diameter and 3mm on the width! That equates to a dynamic load rating that is nearly 300% higher than the stock bearing while the static load rating is over 300% higher! The differences are so dramatic you’ll wonder why these didn’t come stock. If you’ve ever blown a stock rear bearing or broken a stock rear axle carrier, you need to check these out! Our Oversized Rear Axle Carriers are molded in black and backed by our limited lifetime warranty against breakage. You can’t go wrong with RPM parts on your X-Maxx. Tech Notes: RPM Oversized Rear Axle Carriers replace stock Traxxas #7752. Each package is sold as a pair (one left and one right) and includes two inner oversized bearings (one for each side). Outer bearings are stock Traxxas bearings TRX 5106 or TRX 5106A and are not included in this kit.

269,-

299,-

På lager 18
KJØP
-10%
TRX 7733, Traxxas 7733, 7733 This is the Bumper Mount and Front Bumper Support  for the Traxxas X-Maxx Monster Truck,     FEATURES Molded composite plastic construction   INCLUDES One each; Bumper Mount and Front Bumper Support

89,-

Ikke på lager
Denne er utgått og erstattet med TRX 7762X This is the Shock Rebuild Kit for the Traxxas X-Maxx Monster Truck,     FEATURES Restore like-new performance to worn or leaking shocks  Rebuilds two shocks   INCLUDES Two each;  Cartridges with O-Rings  Bushings  Bushing Clips  Pistons  Boots  O-Rings  4x8mm Washers  Locknuts

Ikke på lager
Heavy duty steel 11-tooth pinion gear for X-Maxx front differential. For use with #7792 35-tooth heavy duty differential ring gear.

139,-

På lager 1
KJØP
Input gear, transmission, 20-tooth/ 2.5x12mm pin

49,-

På lager 1
KJØP
TRX 7786X Input shaft, transmission (cush drive)

69,-

På lager 4
KJØP
RPM Front Bumper Mount for X-Maxx Replaces the lower mount from stock Traxxas #7733 Quick Notes: Replaces the lower mount from stock Traxxas #7733 Front Bumper Support Rear Bumper Mount is also available (sold separately) The RPM Front Bumper Mount for the Traxxas X-Maxx is a stout, ultra strong alternative to the small beam supports offered with the stock lower mount. Our version replaces those small tubular posts with a large, 4mm thick plate, offering tons of durability and flexibility to help absorb those heavy frontal impacts. Its simplistic plate design is key to its superior impact protection. By improving frontal impact absorption, our front bumper mount will save you time, frustration and money by protecting those more fragile internal components. Each RPM Front Bumper Mount is molded in black and designed from our trademark blend of engineering grade nylons for a lifetime of protection you can trust. Tech Notes: Replaces the lower mount from stock Traxxas #7733 Front Bumper Support. Upper mount not included.

68,-

135,-

På lager 5
KJØP
-50%
RPM Low Visibility Wheelie Bar for X-Maxx Quick Notes: Protection for the low hanging rear bumper of the X-Maxx Works with RPM #81762 Rear Bumper Mounts only (sold separately) RPM Low Visibility Wheelie Bars are designed to take the stress off of the low hanging rear bumper whenever the rear end wants to drag on the ground. The wheels we designed are large enough to touch down before the rear bumper does in 99% of normal acceleration wheelies, eliminating your fears of blowing the rear bumper off of the truck or using the rear bumper as a plow. Each set of Low Visibility Wheelie Bars is made from our nearly indestructible blend of engineering grade nylons and made right here in the USA. Tech Notes: RPM Low Visibility Wheelie Bars only work with RPM #81762 Rear Bumper Mounts. They will not work with stock or any other known aftermarket rear bumper mounts.

169,-

189,-

På lager 1
KJØP
-11%
RPM Överdimensionerade Styrspindlar till Traxxas X-Maxx Quick Notes: Replaces stock Traxxas #7737 Includes gigantic 20x32x7mm inner bearings Massive steering support ribs for the strongest possible carriers Outer bearings not included (stock bearings are used) Sold in pairs (1 – left and 1 – right) RPM Oversized Front Axle Carriers for the Traxxas X-Maxx were designed to solve two key issues reported by owners of these massive beasts. The first issue being durability. We designed these carriers to handle some serious abuse. RPM Oversized Axle Carriers are BEEFY with massive steering support ribs for the strongest possible carriers available. The other area of improvement comes in the form of larger inner bearings. How large? MASSIVE! The stock inner bearings are a mere 20x27x4mm while the oversized bearings we use are gigantic 20x32x7mm bearings! That’s 5mm larger on the diameter and 3mm on the width! The difference equates to a dynamic load rating that is nearly 300% higher than the stock bearings while the static load rating is over 300% higher! That’s triple the strength of the stock inner bearings. If you’ve ever blown a stock inner bearing or broken a stock front axle carrier, you need to check these out! Our Oversized Front Axle Carriers are molded in black and backed by our limited lifetime breakage warranty. You can’t go wrong with RPM parts on your X-Maxx. Tech Notes: RPM Oversized Front Axle Carriers for the Traxxas X-Maxx replace stock Traxxas #7737. Each package is sold as a pair (one left and one right) and includes two inner oversized bearings (one for each side). Outer bearings are stock Traxxas bearings (#5106 or #5106A) and are not included in this kit.

349,-

** Ikke på lager
KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png