Hopp til innhold
-11%

Traxxas 7759 Washers Motor Mount Alu Blue w/ Screws (4) X-Maxx

Art.nr: TRX 7759

79,-

89,-

- 11%
Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Washers, motor mount, aluminum (blue-anodized) (4)/ 4x18mm BCS (4)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 7759-GRAY
Copied
Traxxas 7759-GRÅ - Motormonterte skiver Aluminium - Grå Skiver, motorfeste, aluminium (gråanodisert) (4)/ 4x18mm BCS (4) Aluminiumsskiver gir ekstra styrke og et godt utseende til motorfestene i X-Truck®-chassiset. Inkluderer 4x18 mm skruer (4). Tilbehørsdel for disse modellene: X-Maxx® XRT® Engelsk tekst: Traxxas 7759-GRAY - Motor Mount Washers Aluminium - Grey Washers, motor mount, aluminum (grey-anodized) (4)/ 4x18mm BCS (4) Aluminum washers add additional strength and good looks to the motor mounts in the X-Truck® chassis. Includes 4x18 mm screws (4). Accessory part for these models: X-Maxx® XRT®

79,-

89,-

KJØP
-11%
Art.nr: TRX 7759-ORNG
Copied
Traxxas 7759-ORNG - Motormonterte skiver aluminium - oransje Skiver, motorfeste, aluminium (oransje-anodisert) (4)/ 4x18mm BCS (4) Aluminiumsskiver gir ekstra styrke og et godt utseende til motorfestene i X-Truck®-chassiset. Inkluderer 4x18 mm skruer (4). Tilbehørsdel for disse modellene: X-Maxx® XRT® Engelsk: Traxxas 7759-ORNG - Motor Mount Washers Aluminium - Orange Washers, motor mount, aluminum (orange-anodized) (4)/ 4x18mm BCS (4) Aluminum washers add additional strength and good looks to the motor mounts in the X-Truck® chassis. Includes 4x18 mm screws (4). Accessory part for these models: X-Maxx® XRT®

79,-

89,-

KJØP
-11%
Art.nr: TRX 7759G
Copied
Traxxas 7759G Washers motor mount aluminum (green anodized) (4)/ 4x18mm BCS (4)

79,-

89,-

KJØP
-11%
Art.nr: TRX 7759R
Copied
Traxxas 7759G Washers motor mount aluminum (Red anodized) (4)/ 4x18mm BCS (4)

79,-

89,-

KJØP
-11%

Kunder kjøpte også

Suspension arm, lower, blue (1) (left, front or rear) (for use with #7895X X-Maxx® WideMaxx® suspension kit) Heavy-duty WideMaxx® suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or launching off a ramp, these arms are built for extreme punishment.

189,-

209,-

KJØP
-10%
Springs, shock (natural finish) (GTX) (1.538 rate) (2)

199,-

KJØP
Springs, shock (natural finish) (GTX) (1.450 rate) (2)

199,-

KJØP
Traxxas 7734X - X-Maxx Rear Bumper Mount and Bumper Support X-Maxx® rear bumper mount and bumper support

89,-

KJØP
Steering Blocks Left & Right (XRT Spec) X-Maxx, XRT Steering blocks, left & right/ caster blocks (c-hubs), left & right/ 20x32x7mm bearings (2)/ 15x24x5mm bearings (2) These left and right steering blocks and caster blocks were redesigned and beefed-up for XRT. Standard in XRT, they can be used to upgrade X-Maxx for extreme duty and maximum strength. Includes two 20x32x7 mm bearings and two 15x24x5 mm bearings. Accessory part for these models: XRT X-Maxx

319,-

349,-

KJØP
-9%
Suspension arms, upper, blue (left or right, front or rear) (2) (for use with #7895X X-Maxx® WideMaxx® suspension kit) Heavy-duty WideMaxx® suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or launching off a ramp, these arms are built for extreme punishment.

149,-

KJØP
Toe links, 202.5mm (187.5mm center to center) (black) (2) (for use with #7895 X-Maxx® WideMaxx® suspension kit)   203 mm fixed composite (188 mm center to center) toe links are direct replacements for the WideMaxx® suspension kit.

139,-

KJØP
Suspension Arm Lower Right F/R Blue X-Maxx WideMaxx, XRT Suspension arm, lower, blue (1) (right, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit) Heavy-duty WideMaxx® suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or launching off a ramp, these arms are built for extreme punishment.

179,-

199,-

KJØP
-10%
These are the 5182A 20 x 27 x 4mm Ball Bearings for the Traxxas X-Maxx Monster Truck. FEATURES Steel construction with black rubber seals Used as the inner bearing in the front steering blocks and the rear stub axle carriers INCLUDES Two 20 x 27 x 4mm Black Rubber Sealed Ball Bearings SPECIFICATIONS Inner Diameter: 20mm Outer Diameter: 27mm Thickness: 4mm

129,-

139,-

KJØP
-7%
These are the 5106A 15 x 24 x 5mm Ball Bearingsfor the Traxxas X-Maxx Monster Truck. FEATURES Steel construction with black rubber seals Used as the outer bearing in the front steering blocks and the rear stub axle carriers INCLUDES Two 15 x 24 x 5mm Black Rubber Sealed Ball Bearings SPECIFICATIONS Inner Diameter: 15mm Outer Diameter: 24mm Thickness: 5mm

99,-

109,-

KJØP
-9%
  Body mounts, front & rear/ 3x12mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x8mm CS (2)/ 3x15mm flat-head machine screw (9)

215,-

KJØP
These are 3x12mm Cap Head Screws from Traxxas. FEATURES: Steel Construction           Black in color           Hex head INCLUDES: Two 3x12mm cap screws SPECS:    Length:  12mm (.47")           Diameter: 3mm (.12")

35,-

KJØP
This is the 46T Spur Gear for the Traxxas XO-1. FEATURES: Molded plastic construction           1.0 metric pitch INCLUDES: 46T Spur Gear for the Traxxas XO-1

39,-

Ikke på lager
     This is a Sponsor Decal Set for R/C Cars                                 from Traxxas. FEATURES: These decals are designed to be used on any scale lexan R/C car and             truck bodies.           Pressure sensitive, peel and stick vinyl decals.           These are the contingency/sponsorship decals that are used on race             cars.           Logos include: Traxxas, Lunati Cams, Hedman Hedders, Simpson, MSD,             Mr. Gasket, NOS, Accel, Hurst, and more.           Multi-purpose decal set is appropriate for any type of car. INCLUDES: One Sponsor Decal Set. SPECS:    Length: 9-1/8" (23.2cm)           Width:  5-1/8" (13.0cm)

59,-

KJØP
 These are the Countersunk 4mm x 10mm Screws              for the Traxxas Nitro Jato Stadium Truck. FEATURES: Metal construction           Black in color INCLUDES: Six 4mm x 10mm Countersunk Flathead Hex Screws REQUIRES: Assembly onto Vehicle

35,-

KJØP
This is a package of 6 Threadlocked Grubs (4mm) from Traxxas.     FEATURES Threadlocking compound pre-applied.  Hardened steel construction.  Designed for use with Traxxas R/C kits.  Hexagon socket drive insert.   INCLUDES Six 4mm Grubs

49,-

KJØP
This is a set of RPM Pro Logo Decal Sheets.     FEATURES Three different sizes.  Yellow, blue, black background and white letters   INCLUDES Two sheets (total of 46 decals)   COMMENTS Each page has one large 4" (101mm), 10 medium 1-5/8" (41mm), and  12 small 1" (25mm) decals

59,-

KJØP
Gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 20-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.

79,-

89,-

KJØP
-11%
Spacer, battery compartment (2)/ foam blocks (4)/ foam pad (2)  

95,-

KJØP
Skid plate, roof (body) (blue)/ 3x12mm CS (4)

69,-

KJØP
Tailgate protector, blue/ 3x15mm flat-head screw (4)

49,-

KJØP
1/10 PowerStroke-støtdempere, passer foran og bak (2): Traxxas MAXX Pro-Line har lansert PowerStroke-støtdempere med høy ytelse som er spesielt utviklet for Traxxas® MAXX®! Hva gjør disse støtdemperne så spesielle? De har demperhus i aluminium med stor diameter og trinnløs justering av fjærforspenningen, kraftige, maskinbearbeidede demperkapper i aluminium, kraftige 5 mm demperaksler og ekte fjærer med dobbel hastighet, noe som gir en massiv oppgradering av ytelse og holdbarhet i forhold til de originale demperne. Alt du trenger å gjøre er å fylle demperne med olje, montere dem på MAXX® og kjøre! Oppgraderte støtdempere er en av de viktigste oppgraderingene du kan få til rcbilen din. Skaff deg PowerStroke-støtdempere i dag! Med det valgfrie fjærsortimentet (PL6364-03) kan du også ta PowerStroke-støtdemperne dine til neste nivå ved å tilpasse dem til dine behov. Er det på tide å bygge om støtdemperne? Pro-Line hjelper deg med O-Ring Replacement Kit (PL6364-01) som inneholder alt du trenger for å bygge om to støtdempere. Har du ødelagt en plastdel på støtdemperne? Pro-Line har et erstatningssett for plast (PL6364-02) som inneholder all plast til to dempere. Enten du er på utkikk etter det beste oppsettet for den lokale banen eller for å kjøre rundt i hagen, vil disse Pro-Line PowerStroke-støtdemperne sørge for at du får den beste ytelsen og en flott opplevelse! Funksjoner: Støtdemperoppgradering med høy ytelse for MAXX®. Støtdempere i aluminium med stor diameter og trinnløs justering av fjærforspenningen Sterke, maskinbearbeidede støtdemperkapper i aluminium Kraftige 5 mm demperaksler Doble O-ringstetninger og øvre og nedre sjokkakselføringer Forhåndsmontert, bare fyll på olje! Passer til: Traxxas MAXX® Spesifikasjoner: Lengde (forlenget): 126,5 mm Lengde (sammenfoldet): 95 mm   1/10 PowerStroke Shocks, Front & Rear (2): Traxxas MAXX Pro-Line is ready to unleash high-performance PowerStroke Shocks that have been specifically designed for your Traxxas® MAXX®! What makes these shocks so special? They include big bore aluminum shock bodies with infinite spring pre-load adjustment, strong machined aluminum shock caps, beefy 5mm shock shafts, and true dual-rate springs for a massive performance and durability upgrade over the stock shocks. All you need to do is fill the shocks with oil, install on your MAXX®, and go! Upgrade shocks are one of the most important upgrades available for your truck. Get your PowerStroke Shocks today! With the optional Spring Assortments (PL6364-03) you can also take your PowerStroke shocks to the next level by tuning them to match your needs. Is it time to rebuild your shocks? Pro-Line has you covered with the O-Ring Replacement Kit (PL6364-01) that includes all necessary items needed to rebuild two shocks. Did you break a plastic part on your shocks? Pro-Line has you covered with the Replacement Plastics (PL6364-02) kit that includes all the plastics for two shocks. Whether you are looking for the best setup for your local track or bashing around your backyard, these Pro-Line PowerStroke Shocks will assure you have the best performance and a great time! Features: High-Performance Shock Upgrade for MAXX® Big Bore Aluminum Shock Bodies with Infinite Spring Pre-load Adjustment Strong Machined Aluminum Shock Caps Beefy 5mm Shock Shafts Dual O-ring Seals and Upper and Lower Shock Shaft Guides Pre-assembled, Just Add Oil! Fits: Traxxas MAXX® Specs: Length (Extended): 126.5mm Length (Collapsed): 95mm

899,-

1.299,-

KJØP
-31%
VAPEX LiPo-Safe Storage Bag-E 260x130x150mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. Features: Perfect storage bag for most RC batteries Zipper Flap/Top Bag-A, B, C & D fits inside it Size: 260x130x150mm We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended! Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

169,-

189,-

KJØP
-11%
LW-30MG Waterproof Servo 30kg/0.14s Power HD HV servo perfekt til 1/10 crawler for deg som ønsker plenty med kraft! Flott og motstandsdyktig utførelse i aluminiums-hus med gir i kobber og aluminium. Servoen er vannbestandig og div servohorn og skruer medfølger.   Spesifikasjoner: Kraft 4.8V: 18kg/cm Hastighet 4.8: 0.18 Kraft 6.0V: 25kg/cm Hastighet 6.0V: 0.16s Kraft 7.2V: 30kg Hastighet 7.2V:     0.14s Vekt: 62g Gir: Kobber & Alu Størrelse: 40.5x 20.5 x 39.3mm Servohorn 25T

499,-

569,-

KJØP
-12%
Body support, rear/ 3x10mm CS (4) (fits #8911 body)

85,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png