Hopp til innhold
-7%

LouiseRC 3297B Tires & Wheels X-UPHILL X-Maxx (MFT) (2)

Art.nr: 3297B

699,-

749,-

- 7%
LOUISERC

LOUISERC

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

 

Louise X-UPHILL - X-MAXX Tires - FRONT & REAR

Truck tires for the high performance Traxxas X-MAXX. The new X-UPHILL tire has the new incorporated MFT technology that is engineered to limit tire expansion (normally refered to as "balooning"). They are mounted on a new very sturdy black nylon 7-spoke wheels with a X-Maxx specific 24 mm hex. The X-UPHILL tire is a good allround tire for most rough surfaces including grass and hard-packed clay!

Micro Fiber Tech Features (MFT):

  • New innovation and technlogy
  • Reduces over balooning
  • More ridgid overall tire structure
  • Less distorsion/flex
  • Stable and even contact with the road surface - more grip and longer tire life


Fits:

  • Traxxas X-MAXX 6s
  • Traxxas X-MAXX 8s
  • (Also may fit other trucks with 24 mm hexes)


Specs:

  • Micro Fiber Tech system (MFT)
  • Wheel diameter:
  • Tire Diameter: 213 mm
  • Tire Width: 98.2 mm
  • Weight (each):
  • Hex: X-Maxx 24 mm
  • Tire Compound: Sport
  • Wheel finish: Black Nylon

Produsent

Kunder kjøpte også

Traxxas 7759-ORNG - Motormonterte skiver aluminium - oransje Skiver, motorfeste, aluminium (oransje-anodisert) (4)/ 4x18mm BCS (4) Aluminiumsskiver gir ekstra styrke og et godt utseende til motorfestene i X-Truck®-chassiset. Inkluderer 4x18 mm skruer (4). Tilbehørsdel for disse modellene: X-Maxx® XRT® Engelsk: Traxxas 7759-ORNG - Motor Mount Washers Aluminium - Orange Washers, motor mount, aluminum (orange-anodized) (4)/ 4x18mm BCS (4) Aluminum washers add additional strength and good looks to the motor mounts in the X-Truck® chassis. Includes 4x18 mm screws (4). Accessory part for these models: X-Maxx® XRT®

79,-

89,-

KJØP
-11%
Traxxas 7889 - X-Maxx Hardware Kit Give your X-Maxx a complete refresh with this replacement hardware kit. Traxxas hardware kits replace the screws and fasteners on your X-Maxx with new factory-fresh hardware. Individual compartments keep everything organized with a handy label to measure and identify the parts. ­ X-MAXX HARDWARE KIT FEATURES­ Black oxide coating for improved rust resistance Tough hex-drive heads Individual box compartments Handy label for identifying hardware Fits X-Maxx

469,-

499,-

KJØP
-6%
Traxxas 7727R Bulkhead, rear (upper) (fits X-Maxx® 8s or XRT™) Rear upper bulkhead fits 8s X-Maxx® and XRT™ Replacement part for these models: XRT™ X-MAXX™ 8s

69,-

KJØP
Bulkhead Front Upper XRT and X-maxx Bulkhead, front (upper) Replacement front upper bulkhead

69,-

79,-

KJØP
-13%
RPM Body Savers for Traxxas X-Maxx Bodies Works with Traxxas #7711, #7711A & #7717G, #7711R & #7711X bodies Quick Notes: Works with new or damaged bodies Disguised for improved visual appeal Works with Traxxas #7711, #7711A & #7717G, #7711R & #7711X bodies The clipless body mounting system Traxxas uses on the X-Maxx is a handy system to have but it tends to have one fatal flaw – the mounting screw holes crack easily, rendering those expensive new bodies useless fairly quickly. If you’ve managed to pull any of your body mounting screws through the body or if you think it’s about to happen, we have the perfect solution to save you from ugly, thick body washers or worse, buying a new body. RPM Body Savers for the X-Maxx are a simple, yet clever solution to solve that problem. Out front, they look like molded hood vents (2) and A/C vents (2) while in the rear, they look like exposed sections of riveted metal (2). It’s a perfect way to camouflage their intended purpose and yet still keep the body firmly attached. The way they work is straightforward and twofold. Out front, they work similarly to oversized washers, yet have significantly more surface area than most washers, without detracting from the looks of your favorite ride. Out back, there are two pairs of screws holding the sub-frame of the body mounting system to the body. Our rear Body Savers tie two pairs of screws together, dispersing the pressure of holding the body to the sub-frame over a wide area of the body. Even if the bottom of the mounting holes in the body are completely ripped out from prior crashes, our system still works! RPM Body Savers are molded in black from our ultra strong, engineering grade nylons for unmatched performance and are sold with enough Body Savers to protect the entire vehicle. Tech Notes: RPM Body Savers are tested to work with Traxxas #7711, #7711A & #7717G, #7711R & #7711X bodies only. They have not been tested nor are they guaranteed to work with any other Traxxas or aftermarket bodies.

199,-

KJØP
Bulkhead tie bar, upper (1)/ lower (2) (steel)

119,-

129,-

KJØP
-8%
These are the Steering Bellcranks  for the Traxxas X-Maxx Monster Truck     FEATURES Molded composite plastic construction  Steel servo saver spring   INCLUDES Two Steering Bellcranks  Bellcrank Support  Servo Saver  Spring  Drag Link  Two 3x20mm Shoulder Screws

159,-

169,-

KJØP
-6%
This is the Front Shock Tower  for the Traxxas X-Maxx Monster Truck     FEATURES Two-piece molded composite plastic construction, dark gray in color   INCLUDES Left and Right Front Shock Tower Halves

109,-

KJØP
Oil, differential (100K wt) (0.7 oz (20cc)) Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions, altering the limited slip capability can enhance turning performance for faster exit speeds. FEATURES: 100K weight oil INCLUDES: 0.7oz  (20cc) bottle of oil w/ 1-1/2" pointed fill cap

99,-

109,-

Ikke på lager
-9%
These are the 1/16 scale GTR Hard Anodized Teflon-Coated Shocks from Traxxas.     These fit the: 1/16 E-Revo 1/16 Slash                                                                                   FEATURES: Fully assembled                                                      Hard anodized, Teflon coated bodies                                  Titanium shock shafts                                                                                                                               INCLUDES: Two (2) Front Shocks                                                      Two (2)Rear Shocks                                                      One (1) Bottle of 40wt Silicone Shock Oil                                Instruction sheet                                                                                                                                   REQUIRES:  Shock Springs                                                                                                                                       SPECS:    Length Fully Compressed (center hole to center hole): 39mm (1.5")    Length Fully Extended (center hole to center hole): 47mm (1.9") 

795,-

KJØP
This is the Wing for use on the                 Traxxas 1/16 E-Revo VXL 4WD RTR. FEATURES: Nylon construction, black in color INCLUDES: One Wing           One Decal Set REQUIRES: Installation on the vehicle SPECS:    Length: 118mm (4.6")           Width: 43mm (1.7")           Height: 29mm (1.1")

75,-

KJØP
This is the optional Center Differential Kit for use on the                  Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Center Differential Kit REQUIRES: Installation on the vehicle  

259,-

Ikke på lager
This is the Aluminum Heat Sink for the Traxxas Velineon 380 Brushless Motor. FEATURES: Aluminum construction, anodized blue in color INCLUDES: Aluminum Heat Sink with tube of Thermal Paste and Instructions

89,-

99,-

KJØP
-10%
Traxxas X-Maxx Protection cover (shock covers not included) Fits: Traxxas X-Maxx only. Color: Black This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to  keep the model electronics cool.

399,-

439,-

KJØP
-9%
Spring, shock (GTR) (2.925 rate, blue) (1 pair)

49,-

KJØP
Features: Viscosity 100000CPS / 24846WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears.  1 bottle /60ml

159,-

KJØP
vThis is the Ring Gear  for the Traxxas X-Maxx Monster Truck     FEATURES Hardened steel construction  Fits front and rear differentials   INCLUDES Ring Gear

99,-

KJØP
Ring gear, differential, 35-tooth (heavy duty) (use with #7790, #7791 11-tooth differential pinion gears)

139,-

159,-

KJØP
-13%
X-Maxx rear upper and lower bulkhead for use with 8s Torque-Biasing Center Drive™. Replaces #7727 and #7728, and requires (2) #5108 ball bearings to complete installation.

239,-

269,-

Ikke på lager
-11%
Heavy duty steel 11-tooth pinion gear for X-Maxx rear differential. For use with #7792 35-tooth heavy duty differential ring gear.

109,-

119,-

KJØP
-8%
Heavy duty steel 11-tooth pinion gear for X-Maxx front differential. For use with #7792 35-tooth heavy duty differential ring gear.

139,-

KJØP
Servo horn, steering, metal/ 3x14 BCS (1) Spline: 25T

79,-

KJØP
Steering link, steel/ servo saver spring, heavy duty (use with #2085X metal gear servo)

99,-

KJØP
Traxxas 2087X Gear Set for Servo 2085X/2085XL Restore the performance of your 2085X or 2085XL servo with this replacement metal gear set. You can also use this gear set to upgrade the standard 2085 servo to an all-metal gear train (must swap all gears). Bearings not included.

359,-

KJØP
  Traxxas Ultra Premium Tire Glue Ultra Premium Tire Glue (#6468) with packageOnly one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand incredible centrifugal forces at speeds in excess of 100mph. No other glue endures such high loads, which makes Traxxas Ultra Premium Tire Glue the ultimate adhesive for any tire and rim combination (and any other application that requires a high-strength bond).  To preserve the maximum bonding power of Traxxas Ultra Premium Tire Glue, its bottle is specially designed to maintain a tight seal and prevent clogging. The bottle and nozzle are made of glue-resistant material, and a pin integrated into the tightly-fitting screw-on cap assures glue won't clog the bottle tip. The tip's fine opening allows precise glue application every time you reach for Traxxas Ultra Premium Tire Glue. Traxxas Ultra Premium Tire Glue is custom-blended exclusively for Traxxas. There simply is no better bond for high-speed, high-power vehicles. Traxxas Ultra Premium Tire Glue Features:   The only glue Traxxas Certified for the 100+mph XO-1 Highest-quality cyanoacrylate (CA) glue available Fine tip opening for precise glue application Tightly-fitting cap with sealing pin Glue-resistant bottle and tip material Includes two precision application tips Content 20gr    

139,-

159,-

KJØP
-13%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png