Traxxas

Traxxas 7061X Shocks GTR Hard Anodized (4)

Art.nr: TRX 7061X

795,-

Traxxas

Traxxas

På lager: 1

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

These are the 1/16 scale GTR Hard Anodized Teflon-Coated Shocks from Traxxas.

These fit the:

1/16 E-Revo

1/16 Slash

FEATURES:

Fully assembled
Hard anodized, Teflon coated bodies
Titanium shock shafts

INCLUDES:

Two (2) Front Shocks
Two (2)Rear Shocks
One (1) Bottle of 40wt Silicone Shock Oil
Instruction sheet

REQUIRES: Shock Springs

SPECS:

Length Fully Compressed (center hole to center hole): 39mm (1.5")
Length Fully Extended (center hole to center hole): 47mm (1.9")

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 2080R Servo Micro Metal Gear Sealed

Traxxas 2080R Servo Micro Metal Gear Sealed

Traxxas 2080R Servo, micro, waterproof, metal gear The 2080R waterproof metal gear servo combines commanding steering authority for 1/16 scale vehicles with the superior durability of all-metal gears for the ultimate driving experience. Accessory part for these models: 1/16 E-Revo® VXL 1/16 E-Revo® 1/16 Slash 4WD 1/16 Slash® 4X4 1/16 Summit™

579,-

599,-

-3%

Hovedbilde Kyosho MZW38-20 Mini-Z Racing Radial Tyres 20 ...

Kyosho MZW38-20 Mini-Z Racing Radial Tyres 20 ...

Kyosho MZW38-20 Mini-Z Racing Radial Tyres 20 Shore-Narrow (4)

149,-

Hovedbilde Traxxas 2421 21T 48P Pinion Gear

Traxxas 2421 21T 48P Pinion Gear

This is the Traxxas 21T 48P Pinion Gear FEATURES: Made of steel INCLUDES: One pinion gear One setscrew, M3.0x4.0mm SPECS: Teeth: 21 Pitch: 48 Length: 10.5mm Diameter: 12mm Hole diameter: 3.4mm Length of teeth: 6.1mm

39,-

Hovedbilde Traxxas 2419 Pinion Gear 48P 19T w/Set Screw Steel

Traxxas 2419 Pinion Gear 48P 19T w/Set Screw Steel

This is a Traxxas 19T 48P Pinion Gear. FEATURES: Metal construction Grey in color INCLUDES: One 19T 48P Pinion Gear One Set Screw REQUIRES: Installation

39,-

Hovedbilde Traxxas 7111 Clear Body 1/16 E-Revo VXL

Traxxas 7111 Clear Body 1/16 E-Revo VXL

This is the Clear Body for use on the Traxxas 1/16 E-Revo VXL 4WD Brushless RTR. FEATURES: Plastic construction Clear INCLUDES: One Clear 1/16 E-Revo Body One Window Masking Set One Decal Set REQUIRES: Polycarbonate paint of modeler's choice Installation on the vehicle SPECS: Length: 283mm (11.1") Width: 100mm (3.9") Height: 75mm (3") (B5)

239,-

259,-

-8%

Hovedbilde Traxxas 7154X Aluminum Wheel Hubs Hex Anodized Blue ...

Traxxas 7154X Aluminum Wheel Hubs Hex Anodized Blue ...

These are the Aluminum Hex Wheel Hubs from Traxxas. FEATURES: Aluminun construction Blue in color INCLUDES: Four Hex Wheel Hubs REQUIRES: Installation on the vehicle SPECS: Hex Size: 12mm Thickness: 4.2mm (0.17")

219,-

Hovedbilde Traxxas 8674 Tires & Wheels Paddel/Carbide Black 3.8

Traxxas 8674 Tires & Wheels Paddel/Carbide Black 3.8" ...

Tires & wheels, assembled, glued (black 3.8' wheels, paddle tires, foam inserts) (2) (TSM rated) Scale: 1/10, 1/8 Size: 3,8 Inch Suit: Truck Drive: 17mm Hex Special: Traxxas TSM-Rated

649,-

699,-

-7%

Hovedbilde Traxxas 5477 Flat Wrench 5mm Blue Revo

Traxxas 5477 Flat Wrench 5mm Blue Revo

This is a Flat, Open-End 5mm Wrench for the Traxxas Revo. FEATURES: Aluminum Construction Blue anodization Etched "Traxxas" and "5mm" logos Drilled hole on one end of easy hanging INCLUDES: One Wrench REQUIRES: Nothing SPECS: Length: 76mm (3.00") Thickness: 3.5mm (.136") Wrench Size: 5mm (.197") COMMENTS: Can be use in most places where a 5mm wrench is required.

49,-

Hovedbilde LouiseRC 3297B Tires & Wheels X-UPHILL X-Maxx (MFT) ...

LouiseRC 3297B Tires & Wheels X-UPHILL X-Maxx (MFT) ...

Louise X-UPHILL - X-MAXX Tires - FRONT & REAR Truck tires for the high performance Traxxas X-MAXX. The new X-UPHILL tire has the new incorporated MFT technology that is engineered to limit tire expansion (normally refered to as "balooning"). They are mounted on a new very sturdy black nylon 7-spoke wheels with a X-Maxx specific 24 mm hex. The X-UPHILL tire is a good allround tire for most rough surfaces including grass and hard-packed clay! Micro Fiber Tech Features (MFT): New innovation and technlogy Reduces over balooning More ridgid overall tire structure Less distorsion/flex Stable and even contact with the road surface - more grip and longer tire life Fits: Traxxas X-MAXX 6s Traxxas X-MAXX 8s (Also may fit other trucks with 24 mm hexes) Specs: Micro Fiber Tech system (MFT) Wheel diameter: Tire Diameter: 213 mm Tire Width: 98.2 mm Weight (each): Hex: X-Maxx 24 mm Tire Compound: Sport Wheel finish: Black Nylon

699,-

749,-

-7%

Hovedbilde Dusty Motors 0101 Traxxas X-Maxx Protection cover

Dusty Motors 0101 Traxxas X-Maxx Protection cover

Traxxas X-Maxx Protection cover (shock covers not included) Fits: Traxxas X-Maxx only. Color: Black This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting batteries and turning a model on/off without removing a shroud. While taking a break between the running stints the shroud can be unzipped to allow ESC and motor to cool quicker. Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to keep the model electronics cool.

399,-

439,-

-9%

Hovedbilde Traxxas 7122 Wing w/Decal Sheet Black 1/16 E-Revo VXL

Hovedbilde Traxxas 7122 Wing w/Decal Sheet Black 1/16 E-Revo VXL

Traxxas 7122 Wing w/Decal Sheet Black 1/16 E-Revo VXL

This is the Wing for use on the Traxxas 1/16 E-Revo VXL 4WD RTR. FEATURES: Nylon construction, black in color INCLUDES: One Wing One Decal Set REQUIRES: Installation on the vehicle SPECS: Length: 118mm (4.6") Width: 43mm (1.7") Height: 29mm (1.1")

75,-

Hovedbilde RPM 80692 Suspension Arms Front Black (2+2) 1/16 ...

Hovedbilde RPM 80692 Suspension Arms Front Black (2+2) 1/16 ...

RPM 80692 Suspension Arms Front Black (2+2) 1/16 ...

RPM Front A-arms for 1/16 E-Revo - Black Replaces stock Traxxas #7131 Quick Notes: Replaces stock Traxxas #7131 Matching Rear A-arms are available Matching Axle Carriers are available Upon the release of the Traxxas 1/16th E-Revo, we immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With our guaranteed unbreakable material and a proven A-arm design based off of our larger, 1/10th scale Revo A-arms, durability for these little monsters has arrived! A significant problem we have been able to eliminate was slop in the suspension system. In some cases, we found as much as 1/32” of slop in the stock A-arms! That has been remedied with these new RPM versions. Our A-arms eliminate nearly all of the A-arm slop, which allows camber, caster and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent steering and suspension system with a significantly reduced tendency for the truck to randomly wander while driving. Unique to RPM suspension arms is our angled leading and trailing edges. We incorporate a 30-degree bevel in these areas, which reduces the chance of breaking suspension parts since the A-arm will naturally try to transition over objects instead of bluntly plowing into them. RPM front A-arms for the Traxxas 1/16 E-Revo are sold in sets of four – both upper and both lower a-arms

179,-

199,-

-10%

Hovedbilde RPM 80602 Rear Upper/Lower A-Arms Black E-Revo eplaces ...

Hovedbilde RPM 80602 Rear Upper/Lower A-Arms Black E-Revo eplaces ...

RPM 80602 Rear Upper/Lower A-Arms Black E-Revo eplaces ...

RPM Rear A-arms for 1/16 E-Revo - Black Replaces stock Traxxas #7132 Quick Notes: Replaces stock Traxxas #7132 Matching Front A-arms available Matching Axle Carriers available Similar to RPM front A-arms, our rear arms eliminate nearly all of the A-arm slop typically found in stock Mini E-Revo rear A-arms, allowing camber and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent suspension system with a significantly reduced tendency for the truck to randomly wander while driving. RPM rear suspension arms match the same design elements as our fronts using angled leading and trailing edges. By incorporating a 30-degree bevel in these areas, we reduce the chance of breaking suspension parts since the A-arms will naturally try to transition over objects instead of bluntly plowing into them. RPM Mini E-Revo rear A-arms are sold in sets of four – both upper and both lower A-arms. These miniature E-Revo A-arms, like all RPM molded products.

199,-

Hovedbilde Traxxas 3070X Connector Traxxas iD Male (2) (for ESC)

Traxxas 3070X Connector Traxxas iD Male (2) (for ESC)

Traxxas® connector (male) (2) - FOR ESC USE ONLY

65,-

Hovedbilde Traxxas 7019R Ball bearings, blue rubber sealed ...

Traxxas 7019R Ball bearings, blue rubber sealed ...

Ball bearings, blue rubber sealed (4x8x3mm) (8)

179,-

Hovedbilde Traxxas 3064X Wire Harness Paralell Battery Connection ...

Traxxas 3064X Wire Harness Paralell Battery Connection ...

Wire harness, parallel battery connection (compatible with Traxxas High Current Connector, NiMH only) Only Traxxas Y-harnesses let you run dual-battery power for increased speed or runtime with the proven convenience and performance of genuine Traxxas High-Current Connectors. Choose the parallel harness to combine battery capacity for extra-long run time. Dual-battery operation requires attention to precautions outlined in the model's owners manual. Follow all precautions to assure peak performance and reliability of your model and batteries. Traxxas parallel and series Y-harnesses are for use with 2/3A battery packs only.

99,-

Hovedbilde Traxxas 2820X LiPo 2S 7.4V 2200mAh 25C w/iD Connector

Traxxas 2820X LiPo 2S 7.4V 2200mAh 25C w/iD Connector

NB: Husk at dette batteriet er beregnet på å bli brukt i ladere med ID-funksjon. This is the Traxxas Power Cell 7.4V 2200mAh 25C 2S LiPo Battery. FEATURES Semi rigid construction does not require a hard case and eliminates wire harness connectors that can loosen and fail Engineered specifically to fit Traxxas models New high current connector with gold-plated copper terminals and integrated balance connector iD Auto Battery Identification allows Traxxas iD equipped chargers to automatically set and optimize charge settings for specific battery MAXX cable high-efficiency 16 gauge silicone jacketed wire INCLUDES Traxxas Power Cell 7.4V 2200mAh 25C LiPo 2S Battery with High Current Connector and Integrated Balance Connector REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus LiPo charging bag SPECIFICATIONS Configuration: 2S2P Continuous Discharge: 25C (55A) Max Burst Rate: 50C (110A) Watt Hours: 16.28 Charge Rate: 1C (2.2A) Max Charge Rate: 2C (4.4A) Dimensions: 3.5 x 0.83 x 1.2" (88 x 21 x 30mm) Weight: 4.2oz (118g)

549,-

569,-

-4%

Hovedbilde RPM 73982 Front Bumper Black 1/16 E-Revo

RPM 73982 Front Bumper Black 1/16 E-Revo

Front Bumper for the Traxxas 1/16th Scale Mini E-Revo Quick Info – replaces stock Traxxas #713 – matching Rear Bumper also availabl Description At just over 2” wide, stock 1/16th scale Traxxas Mini E-Revo bumpers just aren’t large enough to provide any protection to the front or rear end of these cool little trucks. RPM has that problem solved with our new bumpers that measure in at a full 4” wide, almost double the width of the stock bumpers! Now that’s some serious protection. We also decided to go with a more scale look with a twin tube bumper design. Both front and rear bumpers have this new design while the front bumper also integrates an upper protective loop, indicative of a scale front bumper while also providing additional body protection on roll-overs. RPM bumpers for the 1/16th scale Mini E-Revo are molded from RPM materials, which means you know they’re tough! We also mold them in three color options – black, blue and red, matching our A-arms presently available for these mean little trucks while blending perfectly with any stock or aftermarket paint scheme. Affordable… Lightweight… Rugged… Great looking… What more can anyone ask for?

139,-

Hovedbilde Zap Blue Adhesives Thread Locker .20 oz

Zap Blue Adhesives Thread Locker .20 oz

Pacer has designed this bottle of Threadlocker Compound to be used on metal fasteners. It is not recommended for plastic parts. INCLUDES: One bottle of Pacer Threadlocker SPECS: Size: 0.20 ounces (6ml) FEATURES: Medium strength general purpose thread locker Locks threaded fasteners against vibration Perfect for use in helicopters and all RC cars Clean and dry parts for best results (removing grease, oil and dirt) Parts can be returned to service immediately in MOST CASES Thread locking compound comes in a Red bottle with a clear nozzle tip COMMENTS: This bottle of glue will appear big in context to the glue. The reason being is the glue requires a large amount of oxygen or the glue will dry out. All one would need to do once you have the glue is shake the bottle and turn upside down, if the tip turns Blue then the glue is present. To some the bottle may appear empty.

59,-

Hovedbilde Traxxas 1747R Nuts 4mm Flanged Nylon Locking (4)

Traxxas 1747R Nuts 4mm Flanged Nylon Locking (4)

These are the 4mm Flanged Nylon Locknuts from Traxxas. FEATURES: Aluminum construction anodized blue in color Serrated on the back for sure grip INCLUDES: Four 4mm Flanged Nylon Locknuts REQUIRES: 6mm nut driver SPECS: Hole Diameter: 4mm Hex Size: 6mm

99,-

109,-

-9%

Hovedbilde Traxxas 7020 Ball Bearings Blue Rubber Sealed ...

Traxxas 7020 Ball Bearings Blue Rubber Sealed ...

These are the 8x12mm Blue Rubber Sealed Ball Bearings for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Ball bearings Blue rubber sealed INCLUDES: Two Ball Bearings REQUIRES: Installation on the vehicle SPECS: Outer Diameter: 12mm (0.47") Inner Diameter: 8mm (0.31") Width: 3.5mm (0.14")

49,-

Hovedbilde Traxxas 7019 Ball Bearings Blue Rubber Sealed 4x8x3mm ...

Traxxas 7019 Ball Bearings Blue Rubber Sealed 4x8x3mm ...

These are the Rubber Sealed Ball Bearings for use on the Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles. FEATURES: Blue rubber sealed May also be used in any vehicle where this size bearing is required INCLUDES: Two Ball Bearings REQUIRES: Installation on the vehicle SPECS: Outer Diameter: 8mm (0.31") Inner Diameter: 4mm (0.16") Width: 3mm (0.12")

49,-

Hovedbilde Traxxas 7155 Rocker Arm Post Steel (4)

Traxxas 7155 Rocker Arm Post Steel (4)

These are the Steel Rocker Arm Posts for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Steel construction INCLUDES: Four Rocker Arm Posts REQUIRES: Installation on the vehicle SPECS: Length: 18.5mm (0.73") Diameter: 4mm (0.16")

39,-

Hovedbilde Kyosho R246-8542 BALANCE EXTENSION WIRE XH TYPE - 2S ...

Kyosho R246-8542 BALANCE EXTENSION WIRE XH TYPE - 2S ...

BALANCE EXTENSION WIRE XH TYPE - 2S (30MM)

49,-

Hovedbilde Traxxas 2426 Pinion Gear 48P 26T w/Screw

Traxxas 2426 Pinion Gear 48P 26T w/Screw

This is a 26 Tooth, 48 Pitch Pinion Gear with Set Screw from Traxxas. FEATURES: Steel construction, silver in color INCLUDES: One 26 Tooth, 48 Pitch Pinion Gear One 3x4mm Set Screw (1.5mm hex size) REQUIRES: Installation SPECS: Length: .42" (10.5mm) Inside Diameter: 1/8" Outside Diameter: .58" (14mm)

39,-