Traxxas

-6%

Traxxas 1952A Carriers Stub Axle Red Anodized Rear (2)

Art.nr: TRX 1952A

329,-

~~349,-~~

- 6%

Traxxas

Traxxas

På lager: 2

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

These are the optional 1.5° Aluminum Rear Stub Axle Carriers from Traxxas.

FEATURES: Machined aluminum construction
Anodized red in color

INCLUDES: Two Aluminum Rear Stub Axle Carriers
          Two 3x3mm Set Screws
          Two 3x12mm Flat Phillips Head Screws
          Two 3x31.5mm Pins
          Six 6mm E-Clips

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

Hovedbilde Traxxas 1952X Rear Stub Axle Aluminum (2)

Traxxas 1952X Rear Stub Axle Aluminum (2)

Art.nr: TRX 1952X

Copied

These are the optional 1.5° Aluminum Rear Stub Axle Carriers from Traxxas. FEATURES: Machined aluminum construction Anodized blue in color INCLUDES: Two Aluminum Rear Stub Axle Carriers Two 3x3mm Set Screws Two 3x12mm Flat Phillips Head Screws Two 3x31.5mm Pins Six 6mm E-Clips REQUIRES: Installation into Vehicle

329,-

349,-

-6%

Hovedbilde Traxxas 1952T Carriers Stub Axle Orange Anodized Rear ...

Hovedbilde Traxxas 1952T Carriers Stub Axle Orange Anodized Rear ...

Traxxas 1952T Carriers Stub Axle Orange Anodized Rear ...

Art.nr: TRX 1952T

Copied

These are the optional 1.5° Aluminum Rear Stub Axle Carriers from Traxxas. FEATURES: Machined aluminum construction Anodized Orange in color INCLUDES: Two Aluminum Rear Stub Axle Carriers Two 3x3mm Set Screws Two 3x12mm Flat Phillips Head Screws Two 3x31.5mm Pins Six 6mm E-Clips

329,-

349,-

-6%

Hovedbilde Traxxas 1952G Carriers, Stub Axle Rear Aluminium Green ...

Traxxas 1952G Carriers, Stub Axle Rear Aluminium Green ...

Art.nr: TRX 1952G

Copied

Carriers, stub axle (green-anodized 6061-T6 aluminum) (rear) (2)

329,-

359,-

-8%

Hovedbilde Traxxas 1952 Stub Axle Housing (2)

Traxxas 1952 Stub Axle Housing (2)

Art.nr: TRX 1952

Copied

This is a set of two replacement rear hub carriers from Traxxas. These hub carriers mount to the rear lower control arms, and hold the rear axles.

39,-

Hovedbilde Traxxas 6837X Steering Blocks Aluminum Left & Right ...

Hovedbilde Traxxas 6837X Steering Blocks Aluminum Left & Right ...

Traxxas 6837X Steering Blocks Aluminum Left & Right ...

Art.nr: TRX 6837X

Copied

These are the optional Aluminum Left and Right Steering Blocks for the Slash 4x4 from Traxxas. These will increase the durability of the front end of the Slash 4x4, especially when paired with the Traxxas Aluminum Caster Block Set (TRX6832X). FEATURES: 6061 T-6 aluminum construction Anodized blue in color INCLUDES: One Left Steering Block One Right Steering Block REQUIRES: Installation on steering assembly

349,-

389,-

-10%

Hovedbilde Traxxas 6837R Steering Blocks Aluminum Left/Right ...

Traxxas 6837R Steering Blocks Aluminum Left/Right ...

Art.nr: TRX 6837R

Copied

These are the optional Aluminum Left and Right Steering Blocks for the Slash 4x4 from Traxxas. FEATURES: 6061 T-6 aluminum construction Anodized red in color INCLUDES: One Left Steering Block One Right Steering Block REQUIRES: Installation on steering assembly

349,-

389,-

-10%

Hovedbilde Traxxas 6837G Steering Blocks Alu Green L+R (2)

Traxxas 6837G Steering Blocks Alu Green L+R (2)

Art.nr: TRX 6837G

Copied

Steering blocks, 6061-T6 aluminum (green-anodized), left & right

349,-

389,-

-10%

Hovedbilde Traxxas 6837A Steering blocks, 6061-T6 aluminum ...

Traxxas 6837A Steering blocks, 6061-T6 aluminum ...

Art.nr: TRX 6837A

Copied

Steering blocks, 6061-T6 aluminum (orange-anodized), left & right

349,-

389,-

-10%

Hovedbilde Traxxas 6837 Steering Blocks Left & Right Slash 4x4

Traxxas 6837 Steering Blocks Left & Right Slash 4x4

Art.nr: TRX 6837

Copied

These are the Steering Blocks for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction Black in color INCLUDES: Two steering blocks REQUIRES: Installation on steering assembly SPECS: Length: 35mm (1.38") Width: 32mm (1.26")

69,-

79,-

-13%

Hovedbilde Traxxas 6832X Caster Blocks Aluminum Left & Right ...

Hovedbilde Traxxas 6832X Caster Blocks Aluminum Left & Right ...

Traxxas 6832X Caster Blocks Aluminum Left & Right ...

Art.nr: TRX 6832X

Copied

This is a optional Traxxas Aluminum Caster Block Set, and is intended for use with the Traxxas Slash 4x4 truck. These caster blocks are CNC Machined from 6061 Aluminum, and will increase the durability of the front end of the Slash 4x4, especially when paired with the Traxxas Aluminum Steering Block Set (TRX6837X)

469,-

499,-

-6%

Hovedbilde Traxxas 6832R Caster Blocks Aluminum Left/Right ...

Traxxas 6832R Caster Blocks Aluminum Left/Right ...

Art.nr: TRX 6832R

Copied

These are the optional Aluminum Left and Right Caster Blocks from Traxxas for the Traxxas Slash 4x4. FEATURES: 6061 T-6 aluminum construction Anodized red in color Replaces stock plastic caster blocks INCLUDES: One each Left and Right Caster Blocks REQUIRES: Installation on the vehicle

469,-

499,-

-6%

Hovedbilde Traxxas 6832G Caster Blocks Alu Green L+R (2)

Traxxas 6832G Caster Blocks Alu Green L+R (2)

Art.nr: TRX 6832G

Copied

Caster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left & right

469,-

499,-

-6%

Hovedbilde Traxxas 6832A Caster Blocks Alu Orange L+R (2)

Traxxas 6832A Caster Blocks Alu Orange L+R (2)

Art.nr: TRX 6832A

Copied

Caster blocks (c-hubs), 6061-T6 aluminum (orange-anodized), left & right

469,-

499,-

-6%

Hovedbilde Traxxas 6832 Caster Blocks Left & Right Slash 4x4

Traxxas 6832 Caster Blocks Left & Right Slash 4x4

Art.nr: TRX 6832

Copied

These are the Caster Blocks (C-Hubs) for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction Black in color INCLUDES: One left caster block One right caster block REQUIRES: Installation on Slash SPECS: Length: 49mm (1.93") Width: 29.5mm (1.16")

69,-

79,-

-13%

Kunder kjøpte også

Hovedbilde Traxxas 7746 Steering Bellcrank/Bellcrank ...

Traxxas 7746 Steering Bellcrank/Bellcrank ...

These are the Steering Bellcranks for the Traxxas X-Maxx Monster Truck FEATURES Molded composite plastic construction Steel servo saver spring INCLUDES Two Steering Bellcranks Bellcrank Support Servo Saver Spring Drag Link Two 3x20mm Shoulder Screws

159,-

169,-

-6%

Hovedbilde Traxxas 3767A Aluminum Shock Caps Anodized Blue (4)

Traxxas 3767A Aluminum Shock Caps Anodized Blue (4)

These are the Blue Aluminum Shock Caps from Traxxas. FEATURES: Aluminum construction Anodized blue in color Fits all Ultra Shocks INCLUDES: Four Shock Caps REQUIRES: Installation on the shocks

179,-

189,-

-5%

Hovedbilde Traxxas 1952 Stub Axle Housing (2)

Traxxas 1952 Stub Axle Housing (2)

This is a set of two replacement rear hub carriers from Traxxas. These hub carriers mount to the rear lower control arms, and hold the rear axles.

39,-

Hovedbilde HPI 101190 - 17MM HEX AND PIN SET (4pcs)

HPI 101190 - 17MM HEX AND PIN SET (4pcs)

HPI 101190 - 17MM HEX AND PIN SET (4pcs) TROPHY 4.6 TRUGGY RTR / TROPHY TRUGGY FLUX RTR THIS PART FITS THE FOLLOWING KITS / PARTS: Trophy Truggy 4.6 Trophy Truggy 4.6 Trophy Truggy Flux

109,-

Hovedbilde HPI 101305 Racing Wheel Spacer Set (4)

HPI 101305 Racing Wheel Spacer Set (4)

This is the Wheel Spacer Set (4pcs) For the HPI Racing WRI and Bullet Series FEATURES: Metal construction INCLUDES: Four wheel spacers Four bushings COMMENTS: This wheel spacer set can be installed on 1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR 1/10 Bullet MT 3.0 Nitro 2.4GHz RTR 1/10 Bullet ST 3.0 Nitro 2.4GHz RTR (11)

69,-

Hovedbilde Traxxas 2553 Screws Countersunk Machine 3x15mm Revo ...

Traxxas 2553 Screws Countersunk Machine 3x15mm Revo ...

This is a package of six 3x15mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x15mm countersunk screw is required INCLUDES: Six 3x15mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS: Length: 15mm Diameter: 3mm

35,-

Hovedbilde RPM 80732 Rear Bearing Carriers Traxxas Slash/Stampede ...

Hovedbilde RPM 80732 Rear Bearing Carriers Traxxas Slash/Stampede ...

RPM 80732 Rear Bearing Carriers Traxxas Slash/Stampede ...

RPM Rear Bearing Carriers for Hoss 4x4, Slash 4×4, Rustler 4×4, Telluride, Nitro Slash & Stampede 4×4 Replaces Traxxas stock #1952 & #1952X Quick Notes: Fits the Traxxas Slash 4×4, Rustler 4×4, Hoss 4×4, Telluride, Nitro Slash, Stampede 4×4, Nitro Rustler, Nitro Stampede & Nitro Sport Replaces Traxxas stock #1952 & #1952X Requires 2 – 5x11x4mm bearings (not included) Let’s face it: breaking parts sucks! When a part fails, the day is over. Not when your ride is equipped with RPM performance parts! Our newest muscle-laden product is a rear bearing carrier for the Slash 4×4, Rustler 4×4, Telluride, Nitro Slash & Stampede 4×4. The stock version simply can’t handle hardcore carnage like RPM products can. Our version is 100% stock geometry-perfect, but with a few tweaks to improve durability significantly. A ring surrounds the bearing bores, providing additional rigidity while a redesigned camber rod mounting boss helps disperse impact energy more evenly throughout the length of the carrier’s arm. Additionally, the bearing bores in our bearing carriers are designed to hold the bearings tight, meaning absolutely no bearing slop in the bearing bores! We also reduced the end-play of the axles by approximately 1/64”, keeping your rear end tracking perfectly like it’s supposed to. Obviously they wouldn’t be perfect without our trademark blend of RPM nylons that make our products so indestructible. Our carriers are so strong (like all RPM molded products) that we back them with a limited lifetime warranty against breakage! While we designed these bearing carriers with the Traxxas Slash 4×4 in mind, they are direct replacement parts for all of the following vehicles as well: Rustler 4×4, Stampede 4×4, Hoss 4×4, Telluride, Nitro Rustler, Nitro Stampede & Nitro Sport! If you’re tired of ending a fun day due to breakage, we’re here to solve that problem. Check us out; you’ll be glad you did! Tech Notes: RPM Rear Bearing Carriers replace Traxxas stock #1952 & #1952X. RPM Rear Bearing Carriers are sold without bearings

149,-

135,-

Hovedbilde Traxxas 6881 Front Differential Housings Slash 4X4

Traxxas 6881 Front Differential Housings Slash 4X4

This is the Front Differential Housing for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction Black in color INCLUDES: Two front differential housing halves REQUIRES: Installation around assembled differential components

59,-

Hovedbilde RPM 80022 Front Bumper & Skid Plate Black Slash 4x4

RPM 80022 Front Bumper & Skid Plate Black Slash 4x4

Front Bumper & Skid Plate for the Traxxas Slash 4×4 Quick Notes: – replaces stock Traxxas #6835 – matching Rear Bumper also available – optional Light Canister Set also available Description When Traxxas first announced the 4×4 version of the Slash, RPM customers immediately started asking us if our 2wd version parts would fit it. Sadly, that was not the case. Since then, we’ve been working hard to make all of those RPM parts 2wd owners love, fit on the Slash 4×4 version. Our three-piece front bumper / skid plate design for the Traxxas 4×4 is simple, yet strong, effective and highly attractive. We made it a three-piece design to give the Slash owner the option of full front-end bash-proof and crash-proof protection with the skid plate mount, skid plate and bumper installed or if they’re racing, they can remove the bumper and use the skid plate mount and skid plate as a light-weight alternative bumper / skid plate that sheds 27 grams (almost a full ounce) of weight from the front end of the truck. Once the race is over, simply reinstall the bumper and full bash protection is once again available! Our Traxxas Slash 4×4 front bumper design eliminates the bumper support ring and the 4 screws behind the stock bumper while using a thicker skid design to supply the cushioning resistance a basher-proof bumper needs. By eliminating the stock bumper support ring, absolutely no frontal impact crash energy is transferred into the upper half of the differential housing. We supply longer bumper mounting screws as well, so any impact energy from down low has less of a tendency to pull the mounting screws out from the bottom half of the differential housing. With an RPM impact-absorbing front bumper installed, the energy transferred from frontal impacts will be greatly reduced as well. RPM front bumpers for the Traxxas Slash 4×4 are available in three color options: black on black, blue on blue or a chrome bumper on a gray skid plate. We’re so confident in the strength and durability of these new bumpers that they too come with our unbeatable factory warranty protection. Suggestions: RPM light canister sets (RPM #80982 & #80983) fully integrate with our new Slash 4×4 front bumper and skid plate, giving the Slash 4×4 that awesome Desert Racing Truck look and open the 4×4 up to the addition of LED lights for nighttime fun! Don’t forget to check out our Roof-Mounted Light Bar Set too (RPM #80922, #80923 or #80925) for 6 more light canisters of night-blasting fun!

219,-

239,-

-8%

Hovedbilde Traxxas 2754 Stub Axles Pins (4)

Traxxas 2754 Stub Axles Pins (4)

These pins slide through the axle and hold the wheel to the axle. INCLUDES: 4- stub axle pins

15,-

Hovedbilde Traxxas 3762 Black Shocks XX-Long (2)

Traxxas 3762 Black Shocks XX-Long (2)

This is a Pair of the Traxxas Black Shocks XX Long. These shocks are used on the rear of many Traxxas electric and nitro vehicles. FEATURES: Replaces damaged or worn shocks. Molded black plastic bodies. Change the dampening rate (firmness) of each shock with different widths of pre-load spacers. INCLUDES: Two Traxxas Black Shocks XX Long with springs, pre-load spacers of four different widths, silicone oil, bodies and pistons. REQUIRES: Assembling, filling with oil and installing on vehicle. SPECS: Length: 4-1/32" (102mm) fully extended Length: 2-3/4" (69.85mm) fully compressed Diameter: 1/2" (13mm)

215,-

Hovedbilde Absima 700CPS / 54WT Silicone Shock Oil 60ml

Absima 700CPS / 54WT Silicone Shock Oil 60ml

Høykvakitets Silicone demper olje med viskositet 700. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

Hovedbilde Traxxas 6836X Bumper Rear Kit (for LED Lights) Slash ...

Traxxas 6836X Bumper Rear Kit (for LED Lights) Slash ...

Bumper, rear / bumper mount (fits Slash® 4X4) (for LED light kit installation) Replacement rear bumper and bumper mount for Slash® TRX 6894 LED light kit

139,-

Hovedbilde Traxxas 7630 Suspension Arms Front/Rear (2) Teton

Traxxas 7630 Suspension Arms Front/Rear (2) Teton

These are the Front or Rear Suspension Arms for the LaTrax Teton Monster Truck from Traxxas. FEATURES Composite plastic construction Fastens to front or rear bulkheads INCLUDES Two Front or Rear Suspension Arms

69,-

Hovedbilde Dusty Motors 0111 LaTrax Rally/SST/Teton Chassis ...

Dusty Motors 0111 LaTrax Rally/SST/Teton Chassis ...

LaTrax Rally/SST/Teton Chassis Protective Cover (shock covers not included) Fits: LaTrax Rally/SST/Teton only. Color: Black This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting batteries and turning a model on/off without removing a shroud. While taking a break between the running stints the shroud can be unzipped to allow ESC and motor to cool quicker. Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to keep the model electronics cool.

349,-

Hovedbilde Absima 900CPS / 67WT Silicone Shock Oil 60ml

Absima 900CPS / 67WT Silicone Shock Oil 60ml

Høykvakitets Silicone demper olje med viskositet 900. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

Hovedbilde RPM 70664 Wide Front A-Arms Green Rustler/Stampede

RPM 70664 Wide Front A-Arms Green Rustler/Stampede

Wide Front A-arms for the Traxxas electric Rustler & electric Stampede 2wd Quick Notes: – fits all versions of the electric Rustler & electric Stampede 2wd – replaces stock Traxxas #3631 – See “Tech Notes” below for important fitment information – #70680 Screw Kit for XL-5 models Description Are you looking to add some serious stability to your electric Rustler or Stampede 2wd? Look no further! RPM has a new set of wide front A-arms that will push your front wheels out there almost 1-1/4” (31.8mm) of total width for some serious stability-adding performance. Our Wide Front A-arms extend the front width by exactly the difference in offset between the front and rear wheels. All you need to do is get a second set of “front” wheels and bolt them to the rear to align the front and rear tires and you’re good to go! No expensive prefabricated widening kits or time-consuming conversions. It’s as easy as replacing your stock A-arms with RPM wide A-arms, swap the turnbuckles and camber links for longer versions (not included see “Tech Notes” below) and bolt on a new set of rear wheels! It couldn’t be easier. You already know RPM A-arms are the toughest molded a-arms in the R/C industry (gram for gram, stronger than aluminum as well)! Each RPM A-arm is molded from our trademark blend of nearly indestructible nylons. Tech Notes: RPM wide A-arms for the Traxxas Rustler & Stampede 2wd fit all electric versions of these models, although additional parts (not included) are required for completion as listed here: Rustler XL-5: 1 – RPM Screw Kit #70680, 1 – Traxxas #3643 (long camber links), 1 – Traxxas #3645 (long toe links) & 1 pair of front wheels (used to replace rear wheels). Stampede XL-5, Craniac & Skully: 1 – RPM Screw Kit #70680, 1 – Traxxas #3643 (long camber links), 1 – Traxxas #2338 (long toe links) & 1 pair of front wheels (used to replace rear wheels). Rustler VXL: 1 – Traxxas #3643 (long camber links), 1 – Traxxas #3645 (long toe links) & 1 pair of front wheels (used to replace rear wheels). Stampede VXL: 1 – Traxxas #2338 (long toe links) & 1 pair of front wheels (used to replace rear wheels).

149,-

Hovedbilde Traxxas 6792 Tires & Wheels Sledgehammer Black 2.8

Hovedbilde Traxxas 6792 Tires & Wheels Sledgehammer Black 2.8

Traxxas 6792 Tires & Wheels Sledgehammer Black 2.8" ...

Traxxas 6792 - Sledgehammer Tires on 2.8" Wheels for Rustler 4x4 & Stampede 4x4 The all-new Sledgehammer tire for Rustler 4X4 (#6792) provides extreme traction and control for a variety of off-road terrain. The Sledgehammer's increased overall diameter provides additional ground clearance, while the open block tread design clears mud and debris for unmatched traction in loose surfaces. Features: Designed for Rustler 4X4 and Stampede 4X4 models Increased diameter provides additional ground clearance Extreme open block tread design clears debris for unmatched traction New wheel design provides additional strength TSM® rated Specs: Tire Diameter: 133mm Wheel Diameter: 2.8" Width: 65mm Hex: 12mm

479,-

499,-

-4%

Hovedbilde Traxxas 8880 TRAXX Deep Terrain Tracks Complete Set ...

Hovedbilde Traxxas 8880 TRAXX Deep Terrain Tracks Complete Set ...

Traxxas 8880 TRAXX Deep Terrain Tracks Complete Set ...

Traxxas TRX-4 Traxx™ Deep-Terrain Set Steiner, gjørme, sand, snø … ta utfordringen! TRX-4 Deep-Terrain Traxx™ er et beltesett som gir TRX-4-en din maksimal fremkommelighet i krevende terreng. Beltene gir økt trekkraft og flyteevne på underlag som steiner, gjørme, sand og snø, slik at kjøretøyet kan ta seg frem der vanlige hjul kommer til kort. Trekkraft på et helt nytt nivå De nye all-terrain Traxx™-beltene med Deep-Terrain beltemønster gir den mest betydelige oppgraderingen av fremkommelighet du kan gjøre på en TRX-4. TRX-4 har allerede en evne til å komme seg frem nesten overalt, med utstyret som skal til for å håndtere krevende terreng. Men når du monterer et sett med Traxx™, får du en maskin som føles nærmest ustoppelig på praktisk talt alle underlag. Det aggressive Deep-Terrain beltemønsteret graver seg dypt ned og pakker seg fast i løse overflater for maksimal kontakt og grep, slik at bilen kan presse seg gjennom de mest krevende forholdene. Den brede kontaktflaten gir ekstra flyteevne og holder en TRX-4 med Traxx™ kjørende oppå løse underlag som dyp snø og finkornet sand. Traxx™ løfter også portalakslene enda høyere (over 16 mm!), noe som gir økt bakkeklaring og gjør at bilen kan forsere store hindringer i terrenget. Utviklet for tøff og jevn ytelse Hver Traxx™-drivenhet er konstruert for å tåle hard bruk samtidig som den gir jevn og presis funksjon. Et justerbart spennhjul holder beltene stramme, mens de bevegelige støttehjulene gjør at beltene kan tilpasse seg ujevne underlag for maksimal trekkraft. Oljefylte dempere på hver drivenhet kontrollerer rotasjonsbevegelsene og hjelper til med å holde beltet stabilt mot underlaget. De bakre Traxx™-drivenhetene er lengre, noe som gir bedre kontroll og kraft ved klatring i bratte bakker. Egenskaper ved #8880 Deep-Terrain Traxx™ Deep-Terrain beltemønster gir ekstrem trekkraft på løse underlag som gjørme, sand og snø Komplett ferdig montert – klar for installasjon på få minutter Oljefylte coilover-dempere kontrollerer rotasjonsbevegelsene Bevegelige støttehjul gjør at beltene følger ujevne overflater Spesialdesignet ett-dels Deep-Terrain belte hindrer at beltet hopper av Gir betydelig bedre bakkeklaring og bedre angrepsvinkler Konstruert for moro i all slags vær Forseglede kulelager i drivhjulene Vedlikeholdsfrie, selvsmørende metallbøssinger i styrehjulene Lengre bakre Traxx™ for stabilitet ved bratte klatringer Selges som komplett sett med fire belter Passer alle TRX-4-modeller Gjenbrukbar oppbevaringsboks i støpt skum Patenter under behandling Bedre bakkeklaring Montering av Traxx™ på TRX-4 gir en betydelig forbedring av bakkeklaringen. Traxx™ gir: Over 16 mm mer bakkeklaring sammenlignet med 1,9" hjul og dekk Over 8 mm mer bakkeklaring sammenlignet med 2,2" hjul Traxx™ fungerer på samme måte som portalvekter ved at mesteparten av vekten holdes lavt nede, noe som gir bedre stabilitet. Beltene forlenger også effektivt akselavstanden samtidig som de øker breakover-vinkelen (overgangsvinkelen under bilen), noe som gir bedre stabilitet ved kjøring opp bratte skråninger. Økt angrepsvinkel Traxx™ forbedrer både inn- og utkjøringsvinkelen på TRX-4 betydelig. På TRX-4 Sport gir Traxx™: Hele 18° større angrepsvinkel foran 28° større utkjøringsvinkel bak Den ekstra klaringen gjør at bilen kan takle mye brattere hindringer uten at støtfangeren hekter seg fast. Holdbarhet i all slags vær I motsetning til dekk med skuminnlegg trekker ikke Traxx™ til seg vann, uansett hvor våte de blir. Herdede stålaksler, gummiforseglede kulelager i hoveddrivhjulene og selvsmørende metallbøssinger ellers sørger for problemfri kjøring i all slags vær. Best av alt: De leveres ferdig montert og kan monteres på en TRX-4 på bare noen få minutter. Profftips Vi anbefaler sterkt å bruke den børsteløse High-Torque 400 servoen (2255) og High-Output BEC (2262) for maksimal styrekraft under alle forhold. Avhengig av hvordan du bruker Traxx™, kan det være nødvendig med litt justering/kutting av karosseriet. Bruk TRX-4 Long-Arm Lift Kit for å redusere behovet for tilpasning og øke bakkeklaringen. På TRX-4-modeller med T-Locks bør både front- og bakdifferensial være låst for optimal trekkraft og ytelse. På TRX-4-modeller med to-trinns girkasse bør alltid lavgir brukes. Traxxas TRX-4 Deep-Terrain Traxx™ (#8880) gir TRX-4 ekstrem fremkommelighet på snø, sand, gjørme og krevende terreng. De aggressive beltene gir bedre grep, høyere bakkeklaring og større angrepsvinkler enn vanlige hjul. Ferdig montert og klar for montering – en av de største oppgraderingene du kan gjøre på TRX-4. På engelsk: Traxxas TRX-4 Traxx™ Deep-Terrain Set Rocks, Mud, Sand, Snow...Bring It On! TRX-4 Deep-Terrain Traxx™ Traction Redefined New all-terrain Traxx™ with Deep-Terrain Treads provides the most significant traction upgrade you can make to the TRX-4. The TRX-4 already has a go-anywhere attitude and the gear to match, but installing a set of Traxx yields a machine that feels practically unstoppable on virtually any terrain. The Deep-Terrain Treads dig deep and pack into loose surfaces for maximum bite to power through the most challenging conditions. The wide contact patch provides additional flotation to keep your Traxx-equipped model running strong on top of loose surfaces like deep snow and fine sand. Traxx raises the portal axles even higher (over 16mm!) for increased ground clearance that lets you straddle huge obstacles on the trail. Each Traxx drive unit is engineered for rugged, yet smooth performance. An adjustable tension wheel keeps the treads tight while suspended road wheels allow the tread to conform to surface irregularities for maximum traction. Oil-filled dampers on each drive unit control rotational movements to help keep the tread glued to the surface. The rear Traxx drive units are longer to allow climbing steeper grades with authority. #8880 Deep-Terrain Traxx™ Features: Deep-Terrain Treads provide virtually unstoppable traction on loose surfaces like mud, sand, and snow Fully-assembled for installation in just minutes Oil-filled coilover dampers to control rotational movement Suspended road wheels allow treads to conform to irregular surfaces Specially designed one-piece Deep-Terrain Treads resist de-tracking Drastically improves ground clearance and approach angles Designed for all-weather fun Sealed bearings on drive wheels Low-maintenance self-lubricating bushings on guide wheels Longer rear Traxx for steep climbing stability Sold as a set of four Fits all TRX-4 models Re-usable molded foam storage box Patents Pending (Traxxas.com/pat) Improved Ground Clearance Adding Traxx to your TRX-4 significantly improves ground clearance. Traxx adds over 16 mm of ground clearance compared to 1.9” wheels and tires and over 8 mm more than 2.2" wheels. Traxx functions similar to portal weights, carrying the bulk of the weight down low for improved stability. Traxx also effectively lengthens the wheelbase while increasing the breakover angle which adds stability while ascending steep slopes. Increased Approach Angle Traxx drastically increases both the approach and departure angles of the TRX-4. On the TRX-4 Sport, Traxx offers a full 18° higher approach angle and a 28° higher departure angle. This additional clearance allows you to tackle much steeper obstacles without snagging the bumper. All-Weather Durability Unlike tires with foam inserts, Traxx won't absorb water no matter how wet they get. Hardened steel stub axles, rubber-sealed ball bearings for the main drive wheels, and self-lubricating metal bushings everywhere else provide carefree all-weather fun. Best of all, they come pre-assembled and mount to any TRX-4 in just minutes. Pro Tips: We highly recommend you to use the brushless High-Torque 400 servo (2255) and High-Output BEC (2262) for maximum turning power in all conditions. Depending on how you use your Traxx™, slight body trimming may be required. Use TRX-4 Long-Arm Lift Kit to minimize trimming and increase ground clearance. On TRX-4 models equipped with T-Locks, keep the front and rear differentials locked for optimal traction and performance. On TRX-4 models equipped with two-speed transmissions, always use low gear.

2.395,-

2.695,-

-11%

Hovedbilde Traxxas 6852A Driveshaft assembly, rear, extreme heavy ...

Traxxas 6852A Driveshaft assembly, rear, extreme heavy ...

Driveshaft assembly, rear, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

149,-

169,-

-12%

Hovedbilde Traxxas 7430X Bulkhead, front

Traxxas 7430X Bulkhead, front

Bulkhead, front

69,-

79,-

-13%

Hovedbilde Traxxas 6851A Driveshaft assembly, front, extreme ...

Traxxas 6851A Driveshaft assembly, front, extreme ...

Driveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

169,-

189,-

-11%

Hovedbilde Traxxas 3655P Suspension Arms Front/Rear HD Blue ...

Traxxas 3655P Suspension Arms Front/Rear HD Blue ...

Utgått! Erstattet med TRX 3655-BLUE Suspension arms, blue, front/rear (left & right) (2) (heavy duty, cold weather material)

Hovedbilde Traxxas 6832A Caster Blocks Alu Orange L+R (2)

Traxxas 6832A Caster Blocks Alu Orange L+R (2)

Caster blocks (c-hubs), 6061-T6 aluminum (orange-anodized), left & right

469,-

499,-

-6%

Hovedbilde Traxxas 8877 Rubber Track Deep Terrain Set of 4 TRAXX

Hovedbilde Traxxas 8877 Rubber Track Deep Terrain Set of 4 TRAXX

Traxxas 8877 Rubber Track Deep Terrain Set of 4 TRAXX

Traxxas 8877 - Deep Terrain Treads for TRX-4 Traxx™ New Deep-Terrain Treads extend the all-terrain dominance of Traxx-equipped vehicles to extreme surface conditions like deep snow, sand, and mud. The purposefully-engineered treads dig deep and pack into loose surfaces for maximum bite to power through the most challenging conditions. The wide contact patch provides additional flotation to keep your Traxx-equipped model running strong on top of loose surfaces like deep snow and fine sand. QUICK FEATURES ON DEEP TERRAIN TREADS (#8877): Virtually unstoppable traction in snow, mud, and sand Wide tread design helps prevent sinking Installs in minutes Sold as a set of four Works with all TRX-4 models equipped with Traxx Requires #8880 Traxx PRO TIPS FOR TRAXX USERS: Use High-Torque 400 servo (2255) and High-Output BEC (2262) for maximum turning power in all conditions. Depending on how you use your Traxx, slight body trimming may be required. Use TRX-4 Long-Arm Lift Kit to minimize trimming and increase ground clearance. On TRX-4 models equipped with T-Locks, keep the front and rear differentials locked for optimal traction and performance. On TRX-4 models equipped with two-speed transmissions, always use low gear.

429,-

489,-

-12%