Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Traxxas El-Biler / Rustler 4x4 / Traxxas 7430X Bulkhead, front
-13%

Traxxas 7430X Bulkhead, front

Art.nr: TRX 7430X

69,-

79,-

- 13%
Traxxas

Traxxas
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Bulkhead, front

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Zap PT18 Z-End Extened Glue-tips + teflon tubing (10)
Zap PT18 Z-End Extened Glue-tips + teflon tubing (10)
Extender tips allow smaller drops of glue to be placed For those hard-to-reach places Very handy! Works best on: Zap and super glue products   Includes: 10 extended tips and 12 inches of micro dropper tubing

59,-

KJØP
Hovedbilde Traxxas 2889X Battery Li-Po 4S 14,8V 5000mAh 25C ...
Traxxas 2889X Battery Li-Po 4S 14,8V 5000mAh 25C ...
  Traxxas 5000mAh 14.8v 4-Cell 25C LiPo Battery TRAXXAS CERTIFIED LIPO POWER! Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available. Specs: Type: LiPo Total Capacity: 5000 mAh Voltage: 14.8 V (4S) C Rating: 25 Length: 155 mm Height: 34 mm Width: 45 mm Weight: 476 g   Accessory part for these models: Unlimited Desert  RacerX-Maxx

1.395,-

1.495,-

KJØP
-7%
Hovedbilde Traxxas 901544 Jato 4x4 1/8 BL-2s EHD RTR Red Hovedbilde Traxxas 901544 Jato 4x4 1/8 BL-2s EHD RTR Red
Traxxas 901544 Jato 4x4 1/8 BL-2s EHD RTR Red
Traxxas TRX90154-4-RED - Jato 4x4 1/8 BL-2s EHD RTR - RED Race-Inspired Handling. Built Traxxas Tough. Jato® 4X4 delivers agility and toughness in a platform that is both fun and rewarding to drive. The low-CG chassis uses performance-optimized suspension geometry and optimal weight distribution to deliver quick turn-in and precise handling dynamics. As a result, Jato 4X4 handles with the precision of a race buggy and the durability of the Traxxas' toughest off-road trucks. BL-2s Brushless System The BL-2s™ brushless power system ramps up the fun with up to 60% more speed and faster acceleration than comparable brushed power systems. Improved efficiency, high-speed ball bearings, and an internal cooling fan allow Jato 4X4 to run battery after battery for all-day fun. With no brushes to wear out, the BL-2s 3300 Kv is long-lasting and requires virtually no maintenance. Next-Level Toughness Factory-installed Extreme Heavy Duty Upgrade components give Jato 4X4 the superior strength and durability normally associated with Traxxas’ toughest off-road trucks. An ultra-rigid T-Bar reinforces the chassis with Extreme HD shock towers to support the suspension. Huge Maxx-Duty® driveshafts transfer every ounce of the motor’s torque to the wheels with unsurpassed strength. Track-Ready Handling Jato 4X4 sits low and wide, concentrating its weight below the driveshafts for exceptional handling and perfect weight distribution. Extra-long GTR shocks in the front and rear maximize traction by keeping Jato 4X4’s new Sledgehammer® buggy tires in constant contact with the ground. Add the optional sway bar kit (sold separately) for ultra-flat cornering and game-changing on-track performance. Clipless Buggy Body Jato 4X4’s form-fitted clipless body cuts through the wind and eliminates the parachuting effect for stable performance at speed. Tough clipless side latches hold the body securely in place but release in just seconds for fast battery swaps. Jato 4X4 incorporates the high-downforce wing from Sledge® to keep its chassis planted with rugged rollover protection as an added benefit. Specs: Length: 517 mm Width: 305 mm Ground Clearance: 26 mm (center) Weight (no battery): 2.36 kg Height (overall): 179 mm Wheelbase: 320 mm Shock Length (front): 101 mm - XX-long Shock Length (rear): 101 mm - XX-long Speed Control: BL-2s™ electronic speed control Motor (electric): BL-2s™ 3300 Kv sensorless brushless Overall Drive Ratio: 12.80:1 Differential Type: Hardened steel bevel, sealed, limited slip Gear Pitch: 32 Chassis Structure/Material: Composite tub Drive System: Shaft-driven 4WD Steering: Dual-bellcrank with integrated servo saver Tires: Sledgehammer® with foam inserts Tire Diameter: 114 mm Wheels: 78mm (3") Gray buggy wheels Radio System: TQ™ 2.4 GHz (2-channel) Servo: Waterproof digital 2075 servo (125 oz-in torque) Skill Level: 1 Battery Compartment (L/W/H): 165 x 50 x 23/26 mm Motor Specs: Type: BL-2s 3300 Kv sensorless brushless motor Weight: 213 g Length: 80 mm Diameter: 36 mm Connector Type: Traxxas Quick Connect Motor Plug ESC Specs: Input Voltage (cells): 6-7 Cells NiMH / 2s LiPo Case Size: 139 x 59 x 31 mm Weight: 3.07 ounces (87 g) BEC Voltage: 6.0 volts Reverse Delay: Yes, with lockout Thermal Protection: Two-stage thermal shutdown Ports: Auxiliary fan What’s In The Box: Jato 4X4 with BL-2s ESC and 3300 Kv motor Quick Start Guide TQ 2.4 GHz radio system High quality maintenance tools What You’ll Need: Batteries: Jato 4X4 requires a 7.4-volt LiPo battery or 8.4-volt NiMH battery. See full list of batteries. Charger: The Traxxas EZ-Peak® charger (2970) is recommended for easy and fast charging performance. AA Alkaline Batteries: Four AA alkaline batteries for the transmitter.

4.695,-

4.995,-

KJØP
-6%
Hovedbilde Traxxas 6823 Bulkhead Tie Bars Front/Rear Slash 4x4
Traxxas 6823 Bulkhead Tie Bars Front/Rear Slash 4x4
This is the replacement Bulkhead Tie Bars for the Traxxas Slash 4X4. FEATURES: Aluminum construction           Anodized blue in color INCLUDES: Two bulkhead tie bars (front and rear) REQUIRES: Installation on the Slash 4X4

85,-

KJØP
Hovedbilde Traxxas 6928 Conversion Kit Clipless Body Slash 4x4 Hovedbilde Traxxas 6928 Conversion Kit Clipless Body Slash 4x4
Traxxas 6928 Conversion Kit Clipless Body Slash 4x4
Traxxas 6928 Body conversion kit, Slash 4X4 (includes front & rear body mounts, latches, hardware) (for clipless mounting) The Slash® 4X4 clipless body conversion kit allows you to convert your 1/10 scale 4X4 Slash chassis and body to the convenience and style of clipless body mounting. Wide latch mounts cover the existing body mount holes to provide a secure mounting point that helps prevent pull-through damage. The kit includes all mounting hardware and adhesive templates. Accessory part for these models: Slash 4X4 Ultimate Slash 4X4 VXL Slash® 4X4 Brushless Slash 4X4

399,-

419,-

KJØP
-5%
Hovedbilde Traxxas 7426X Battery Hold-Downs Tall 1/10 Rally VXL
Traxxas 7426X Battery Hold-Downs Tall 1/10 Rally VXL
 This is the Battery Hold-downs and Tall Retainers                   for the Traxxas 1/10 Rally VXL rally car FEATURES: Made of black plastic. INCLUDES: One battery hold-down           One tall front hold-down retainer           One tall rear hold-down retainer SPECS:    hold-down, length:         7-5/8" (194mm)                      width:          1-1/4" (32mm)                      height:         3/8"   (10mm)           front retainer, length:    46mm   (1-13/16")                           width:     50mm   (2")                           thickness: 8.5mm  (5/16")           rear retainer, length:     48mm   (1-7/8")                          width:      42mm   (1-5/8")                          thickness:  17mm   (11/16") COMMENTS: The tall hold-down retainers allow for the use of taller,              multi-cell batteries.

89,-

99,-

KJØP
-10%
Hovedbilde Traxxas 6888 Center Rear Drive Hub Slash 4X4
Traxxas 6888 Center Rear Drive Hub Slash 4X4
This is the Front and Rear Center Drive Hub Set for use on the                       Traxxas Slash 4x4 Vehicles. FEATURES: Nylon and steel construction INCLUDES: One Front Center Drive Hub           One Rear Center Drive Hub           One Screw Pin REQUIRES: Installation in drive assembly

59,-

KJØP
Hovedbilde Traxxas 7435 Front Skidplate
Traxxas 7435 Front Skidplate
Skidplate, front (angled for higher ground clearance) (use with #7434 foam body bumper)

49,-

KJØP
Hovedbilde Traxxas 7423 Nerf Bars (2) 1/10 Rally VXL
Traxxas 7423 Nerf Bars (2) 1/10 Rally VXL
These are the Nerf Bars                       For the Traxxas 1/10 Rally VXL FEATURES: Made of black plastic, these are mounted to the side of the car              to protect agains side impacts. INCLUDES: Two nerf bars SPECS:    Length: 5-1/2"           Width:  1-7/8"           Height: 2-1/4"

49,-

KJØP
Hovedbilde Traxxas 6836X Bumper Rear Kit (for LED Lights) Slash ...
Traxxas 6836X Bumper Rear Kit (for LED Lights) Slash ...
Bumper, rear / bumper mount (fits Slash® 4X4) (for LED light kit installation) Replacement rear bumper and bumper mount for Slash® TRX 6894 LED light kit

139,-

KJØP
Hovedbilde Traxxas 3642 Shoulder Screws 3x12x5mm (6)
Traxxas 3642 Shoulder Screws 3x12x5mm (6)
This is a Package of 3x12x5mm Shoulder Screws for many                           Traxxas Vehicles. FEATURES: Black steel construction           Screws are half-threaded/half-smooth           Phillips head INCLUDES: Six 3x12x5mm shoulder screws SPECS:    Length: 12mm (.47")           Diameter: 3mm (.12")           Thread Length: 5mm (.20")

39,-

Ikke på lager
Hovedbilde Traxxas 2552 Screws Countersunk Machine 3x12mm Revo ...
Traxxas 2552 Screws Countersunk Machine 3x12mm Revo ...
This is a package of six 3x12mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x12mm countersunk screw is required INCLUDES: Six 3x12mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  12mm           Diameter: 3mm

35,-

KJØP
Hovedbilde Traxxas 3938 Button Head Machine Screw 4x14mm Revo (6) ...
Traxxas 3938 Button Head Machine Screw 4x14mm Revo (6) ...
This is a 4x14mm Button Head Screw Set for the Traxxas Revo vehicle. FEATURES: Steel construction           Black in color           Low-profile, button-head design           Hex drive (allen type) INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS:    Overall Length:  16mm (.63")           Threaded Length: 14mm (.55")           Thread Size:     M4x.7mm coarse           Hex Wrench Size  2.5mm COMMENTS: Used on the Revo to mount the Roll Hoop.

35,-

KJØP
Hovedbilde Traxxas 6895 Front Sway Bar Linkage (2)
Traxxas 6895 Front Sway Bar Linkage (2)
This is the Front Linkage Sway Bar Set for the Slash 4x4 from Traxxas and Stampede 4x4. FEATURES: Nylon and steel construction INCLUDES: 2 Rod ends           2 Ball studs           2 Hollow balls REQUIRES: Installation on front suspension

125,-

Ikke på lager
Hovedbilde Traxxas 2553 Screws Countersunk Machine 3x15mm Revo ...
Traxxas 2553 Screws Countersunk Machine 3x15mm Revo ...
This is a package of six 3x15mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x15mm countersunk screw is required INCLUDES: Six 3x15mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  15mm           Diameter: 3mm

35,-

KJØP
Hovedbilde Traxxas 2534 Countersunk Machine Hex Drive Screws ...
Traxxas 2534 Countersunk Machine Hex Drive Screws ...
This is a 3x6mm Countersunk Machine Screw Set from Traxxas FEATURES: Steel construction INCLUDES: (6) 3x6mm screws

35,-

KJØP
Hovedbilde Traxxas 2224 Steering Wheel Foam Grip for Transmitter ...
Traxxas 2224 Steering Wheel Foam Grip for Transmitter ...
Steering Wheel Foam Grip for Transmitter TQ

39,-

KJØP
Hovedbilde Dusty Motors 1001 Velcro tape hook part 1 meter
Dusty Motors 1001 Velcro tape hook part 1 meter
Velcro tape hook part 1 meter

79,-

KJØP
Hovedbilde Traxxas 2551 Screws Countersunk Machine 3x10mm Revo ...
Traxxas 2551 Screws Countersunk Machine 3x10mm Revo ...
This is a package of six 3x10mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x10mm countersunk screw is required INCLUDES: Six 3x10mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  10mm           Diameter: 3mm

35,-

KJØP
Hovedbilde Traxxas 4611 Ball Bearings 5x11x4mm (2)
Traxxas 4611 Ball Bearings 5x11x4mm (2)
These are 5 x 11 x 4mm Ball Bearings from Traxxas.     FEATURES Ball bearings reduce friction and last longer than bushings.  Chrome steel construction.  Used to upgrade from bushings.   INCLUDES Two 5 x 11mm bearings   SPECIFICATIONS  Inner Diameter: 5mm  Outer Diameter: 11mm  Thickness: 4mm

79,-

KJØP
Hovedbilde Traxxas 7490 Plate Motor 1/10 Rally VXL
Traxxas 7490 Plate Motor 1/10 Rally VXL
This is the Motor Plate for the 1/10 scale Rally Race Car from Traxxas. FEATURES: Aluminum construction, anodized blue in color INCLUDES: Aluminum Motor Plate

85,-

KJØP
Hovedbilde Traxxas 7460A Motor Mount Rustler 4x4/Slash Ultimate
Traxxas 7460A Motor Mount Rustler 4x4/Slash Ultimate
Denne erstatter TRX 7460 Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)

69,-

KJØP
Hovedbilde Traxxas 3943X Pinion Gear 13T-32P Hardened Steel
Traxxas 3943X Pinion Gear 13T-32P Hardened Steel
Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw   For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

KJØP
Hovedbilde Traxxas 7477 Cover Gear/Wire Retainer 1/10 Rally VXL
Traxxas 7477 Cover Gear/Wire Retainer 1/10 Rally VXL
This is the Cover Gear/Wire Retainer                       For the Traxxas 1/10 Rally VXL FEATURES: Made of black plastic. INCLUDES: One cover gear           One wire retainer

39,-

KJØP
Hovedbilde Traxxas 7438 Linkage Steering 1/10 Rally VXL
Traxxas 7438 Linkage Steering 1/10 Rally VXL
This is a replacement Traxxas Steering Linkage Set, and is intended for use with the Traxxas 1/10 Rally Racer.

49,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png