Hopp til innhold
Hjem / Verktøy/Lakk/Lim / Verktøy alle produsenter / M-DRIVE VERKTØY / M-Drive 50500 Shock Tool Universal
-6%

M-Drive 50500 Shock Tool Universal

Art.nr: MD50500

299,-

319,-

- 6%

Minicars
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

M-Drive MD50500 - Universal Shock tool Aluminium

This is a practical and universal tool for wrenching on your RC car shocks. It has allocations for 3, 3.5 & 4mm diamater shock shafts and two different shock bodies (dont apply too much force when pinching shock bodies). Use it also for pivot ball assembly/removal (4.5/2.5mm pin).

Produsent

Minicars

Kunder kjøpte også

Hovedbilde FlySky FGr4B AFHDS3 Receiver 4CH Hovedbilde FlySky FGr4B AFHDS3 Receiver 4CH
FlySky FGr4B AFHDS3 Receiver 4CH
Flysky FGr4B 4-kanals mottaker – AFHDS3   Flysky FGr4B 4-kanals mottaker med AFHDS3 Flysky FGr4B er en kompakt og pålitelig Flysky mottaker med 4 kanaler og støtte for den avanserte AFHDS3-protokollen. Denne AFHDS3 mottakeren er et godt valg for deg som trenger en Flysky 4-kanals mottaker til RC-bil eller RC-båt. Trenger du en Noble NB4 mottaker? Flysky FGr4B er kompatibel med Flysky Noble NB4, NB4 Lite, Paladin PL18 og andre radiosendere som støtter AFHDS3. Mottakeren har doble antenner, støtter toveis kommunikasjon og kan levere PWM-, PPM-, i-BUS- og S.BUS-signaler. Med kompakte mål på bare 17 × 29 × 16 mm passer den i mange forskjellige RC-modeller.   Spesifikasjoner Egenskap Spesifikasjon Antall kanaler 4 PWM-kanaler Frekvens 2,4 GHz Protokoll AFHDS3 Antenner Doble antenner Driftsspenning 3,5–9 V Signalutganger PWM / PPM / i-BUS / S.BUS Temperaturområde -10 °C til +60 °C Maksimal luftfuktighet 20–95 % Oppdatering Ja, via nettbasert oppdatering Dimensjoner 17 × 29 × 16 mm Vekt 6,4 g Bruksområde RC-biler, båter m.m. Kompatible sendere Alle AFHDS3-sendere og RF-moduler, inkludert PL18, Paladin EV, NB4 og NB4 Lite Viktig om kompatibilitet Flysky FGr4B benytter AFHDS3-protokollen og er derfor ikke kompatibel med eldre Flysky-sendere som kun støtter AFHDS eller AFHDS2A.   On english: The Flysky FGr4B is a 4-channel receiver for Flysky remote controls. It uses the automatic frequency hopping digital system (AFHDS3) and bidirectional transmission via its antenna. It supports installation and output of PWM/PPM/i-BUS out/S.BUS signals and works with all AFHDS3-capable transmitters. Specifications: PWM Channels 4 RF 2.4 GHz Protocol AFHDS 3 Antennas Dual Input Voltage 3.5–9 V Output PWM/PPM/i-BUS out/S.BUS Temperature Range -10 °C to +60 °C Max. Humidity 20%–95% Update Yes, online Dimensions 17 × 29 × 16 mm Weight 6.4 g Suitable For Cars, Boats, etc. Compatible Transmitter all AFHDS3 transmitters and RF modules (PL18, Paladin EV, NB4, NB4 Lite etc.)

649,-

699,-

KJØP
-7%
Hovedbilde Tamiya 87016 Pointed Brush (Medium)
Tamiya 87016 Pointed Brush (Medium)
Pointed Brush (Medium)

39,-

KJØP
Hovedbilde Tamiya 81786 Acrylic Mini XF-86 Flat Clear 10ml
Tamiya 81786 Acrylic Mini XF-86 Flat Clear 10ml

30,-

KJØP
Hovedbilde Tamiya 81532 Acrylic Mini X-32 Titanium Silver 1/3 oz
Tamiya 81532 Acrylic Mini X-32 Titanium Silver 1/3 oz
This is a 10ml Jar of Tamiya color Acrylic Paint "Mini" (Titanium Silver).                       For Adult Modelers Age 14 and Older. FEATURES: Handy paint for hobby use.           Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin and             styrofoam.           It can be washed away with plain water if done prior to curing.           Glass jar with a plastic, color coded, screw-on lid.           Paint number X-32 on the Tamiya Color Chart. INCLUDES: One Jar of Acrylic Paint "Mini" (Titanium Silver) REQUIRES: Stir Stick SPECS:    Volume:  10ml  (1/3 fl oz)

39,-

KJØP
Hovedbilde Tamiya 87044 Surface Primer L White
Tamiya 87044 Surface Primer L White
This is a 180ml Can of White Fine Surface Primer from Tamiya. FEATURES: Spray type primer specially developed for model finishing.           Use on metal and plastic.           The fine particle of the primer ensures a smooth finish after             application.           White color is ideal as a base coat for bright colors. INCLUDES: One 180ml Can of White Fine Surface Primer. SPECS:    180ml

139,-

KJØP
Hovedbilde Tamiya 86014 PS-14 Polycarbonate Spray Copper 3 oz
Tamiya 86014 PS-14 Polycarbonate Spray Copper 3 oz
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-14 Copper).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
Hovedbilde Tamiya 86001 PS-1 Polycarbonate Spray White 3 oz
Tamiya 86001 PS-1 Polycarbonate Spray White 3 oz
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-1 White).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable. Lakk maling sprayboks lakkboks ps.

109,-

119,-

KJØP
-8%
Hovedbilde Tamiya 85019 Spray Lacquer TS-19 Metallic Blue 3 oz
Tamiya 85019 Spray Lacquer TS-19 Metallic Blue 3 oz
This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Metallic Blue Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.           Keep out of the reach of children.

109,-

KJØP
Hovedbilde Tamiya 85017 Spray Lacquer TS-17 Aluminum Silver 3 oz
Tamiya 85017 Spray Lacquer TS-17 Aluminum Silver 3 oz
This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Gloss Aluminum Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

KJØP
Hovedbilde Tamiya 85006 Spray Lacquer TS-6 Matte Black 3 oz
Tamiya 85006 Spray Lacquer TS-6 Matte Black 3 oz
This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Matt Black Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

KJØP
Hovedbilde Tamiya 85001 Spray Lacquer TS-1 Red Brown 3 oz Hovedbilde Tamiya 85001 Spray Lacquer TS-1 Red Brown 3 oz
Tamiya 85001 Spray Lacquer TS-1 Red Brown 3 oz
This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Red Brown Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

KJØP
Hovedbilde Traxxas 6468 Tire Glue TRX Ultra Premium Hovedbilde Traxxas 6468 Tire Glue TRX Ultra Premium
Traxxas 6468 Tire Glue TRX Ultra Premium
  Traxxas Ultra Premium Tire Glue Ultra Premium Tire Glue (#6468) with packageOnly one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand incredible centrifugal forces at speeds in excess of 100mph. No other glue endures such high loads, which makes Traxxas Ultra Premium Tire Glue the ultimate adhesive for any tire and rim combination (and any other application that requires a high-strength bond).  To preserve the maximum bonding power of Traxxas Ultra Premium Tire Glue, its bottle is specially designed to maintain a tight seal and prevent clogging. The bottle and nozzle are made of glue-resistant material, and a pin integrated into the tightly-fitting screw-on cap assures glue won't clog the bottle tip. The tip's fine opening allows precise glue application every time you reach for Traxxas Ultra Premium Tire Glue. Traxxas Ultra Premium Tire Glue is custom-blended exclusively for Traxxas. There simply is no better bond for high-speed, high-power vehicles. Traxxas Ultra Premium Tire Glue Features:   The only glue Traxxas Certified for the 100+mph XO-1 Highest-quality cyanoacrylate (CA) glue available Fine tip opening for precise glue application Tightly-fitting cap with sealing pin Glue-resistant bottle and tip material Includes two precision application tips Content 20gr    

139,-

159,-

KJØP
-13%
Hovedbilde Traxxas 8796-BLUE Car Stand Alu 1/10-1/8 Hovedbilde Traxxas 8796-BLUE Car Stand Alu 1/10-1/8
Traxxas 8796-BLUE Car Stand Alu 1/10-1/8
Traxxas 8796-BLUE - Car and Truck Stand Work Like a Pro with the Traxxas RC Stand! Designed to fit almost any 1/8 and 1/10 scale vehicle, the aluminum Traxxas RC stand is the perfect addition to your workbench. Made from high-quality aluminum and anodized with a brilliant blue finish, the RC stand is built for years of dependable service. The stand swivels a full 360° on dual ball bearings for smooth, precise action. A handy locking lever secures the stand in one of 16 different positions for maximum stability. Pick up your Traxxas RC stand today and start working like a pro! RC Stand Features: Engineered for the full range of Traxxas 1/10 to 1/8 scale vehicles Use with TRX-4M foam stand (9794) for 1/18 scale models Use with Foam Inserts (8794) for LaTrax 1/18 scale and Traxxas 1/16 Scale models Tough aluminum construction with a brilliant blue finish Dual ball bearings for smooth 360° rotation Locking lever with 16 positions Non-slip foam pads on top and bottom Perfect for maintaining and storing vehicles Prevents flat-spotting of tires Compatible with 1/18 TRX-4M™ The Traxxas RC stand features cutouts for the TRX-4M display stand (9794, sold separately) to securely hold 1/18 scale models for storage and maintenance. Compatible with LaTrax 1/18 Scale and Traxxas 1/16 Scale Models The foam insert set for the Traxxas RC Stand (8794, sold separately) accommodates smaller scale models.

479,-

519,-

KJØP
-8%
Hovedbilde Vapex LIPOBAGA Charging Bag-A Li-Po 175x225mm Hovedbilde Vapex LIPOBAGA Charging Bag-A Li-Po 175x225mm
Vapex LIPOBAGA Charging Bag-A Li-Po 175x225mm
Charging Bag-A Li-Po 175x225mm VAPEX LiPo-Safe Bag-A 175x225mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended!   Features: Fits many different medium sized batteries for most 1/10 cars, boats & airplanes Fits inside the storage Bag-E Envelope Style Velcro Flap Size: 175x225mm Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

79,-

KJØP
Hovedbilde M-DRIVE 23000 Pro TiN Allen Wrench Ball Hex Tool Set ... Hovedbilde M-DRIVE 23000 Pro TiN Allen Wrench Ball Hex Tool Set ...
M-DRIVE 23000 Pro TiN Allen Wrench Ball Hex Tool Set ...
M-DRIVE PRO TiN Hex/Allen Wrench Tool Set - 2, 2.5 & 3mm - Ball Hex High quality PRO series ball tipped hex/allen wrench tool set with black & gold anodized aluminium handles and tough Tin coated hardened steel tips. The wrenches are also available separately plus also spare tips/bits.   Specs: Handle: Black and Gold anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Diameter: 3mm Tip/Bits Material: TiN coated hardened steel

259,-

279,-

KJØP
-7%
Hovedbilde Hudy 199910 Pit Mat 750x1200mm
Hudy 199910 Pit Mat 750x1200mm
The newly-designed HUDY Pit Mat offers a large 750x1200mm anti-slip surface, perfect for a pit table or your workbench. The anti-skid foam construction is long-lasting & durable, making the Pit Mat lightweight and very easy to pack. The next generation pit mat is here today.

245,-

KJØP
Hovedbilde Dynomax B9670 Charging Lead 4/5mm 2S CAR LiPo to XT60 ... Hovedbilde Dynomax B9670 Charging Lead 4/5mm 2S CAR LiPo to XT60 ...
Dynomax B9670 Charging Lead 4/5mm 2S CAR LiPo to XT60 ...
DynoMAX B9670 - Charging Lead for 1-2S Hardcase LiPo Batteries with 4/5 mm connectors (XT60 Charger Connector) This is a charging lead for hardcase 1-2S Lithium batteries with either a 4 or 5mm female bullet connectors (+ 2mm balance port). It fits the latest SkyRC chargers that are equipped with a XT60 male output/charging connector. Specs: Battery Connector: 4/5mm Male Bullets Balance Plug: 2mm Male Bullet Charger Connector: XT60 Wires: 12AWG Length: 500mm

119,-

KJØP
Hovedbilde M-DRIVE Hex/Nut Driver Tool Set - 4, 5.5, 7 & 8mm Hovedbilde M-DRIVE Hex/Nut Driver Tool Set - 4, 5.5, 7 & 8mm
M-DRIVE Hex/Nut Driver Tool Set - 4, 5.5, 7 & 8mm
M-DRIVE Hex/Nut Driver Tool Set - 4, 5.5, 7 & 8mm High quality nutdriver wrench tool set with black anodized aluminium handles and tough drivers made of HSS steel. The wrenches are also available separately. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Material: High quality HSS Suitable for: Nut Driver 4.0mm: For M2 nuts Nut Driver 5.5mm: For M3 nuts Nut Driver 7.0mm: For M4 nuts Nut Driver 8.0mm: For M5 nuts (and std glow plugs)

249,-

KJØP
Hovedbilde M-DRIVE 90500 Tool Pouch/Bag with Zipper Hovedbilde M-DRIVE 90500 Tool Pouch/Bag with Zipper
M-DRIVE 90500 Tool Pouch/Bag with Zipper
M-DRIVE Tool Pouch/Bag with Zipper This is a professional canvas tool pouch that is the perfect on-the-go storage for your M-Drive tools. Specs: Black canvas with yellow contrast Printed M-Drive logo Zipper Length: 260mm Width: 240mm Height: 35mm Tools not Inculded as shown below  

149,-

KJØP
Hovedbilde M-DRIVE PRO TiN Hex/Allen Wrench Tool Set - 1.5, 2, ... Hovedbilde M-DRIVE PRO TiN Hex/Allen Wrench Tool Set - 1.5, 2, ...
M-DRIVE PRO TiN Hex/Allen Wrench Tool Set - 1.5, 2, ...
MDRIVE PRO TiN Hex/Allen Wrench Tool Set - 1.5, 2, 2.5 & 3mm Straight Hex High quality PRO series hex/allen wrench tool set with black anodized aluminium handles and tough hardened steel tip with a TiN coating. The PRO wrenches are also available separately plus also spare tips/bits.   Specs: Handle: Black & Gold anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Diameter: 3mm Tip/Bits Material: Hardened steel with TiN coating Suitable for: Straight Hex 1.5mm: For M3 electric motor pinion grub screws (most 1/10 - some larger pinions use a M4 screw that needs an straight 2mm) Straight Hex 2.0mm: For M3 hex screws with countersunk head or button-head Straight Hex 2.5mm: For M3 hex screws with allen head (cylindrical) and M4 hex screws with countersunk head or button-head Straight Hex 3.0mm: For M4 hex screws with allen head or M5 with countersunk head & M5 with a button head

329,-

349,-

KJØP
-6%
Hovedbilde M-DRIVE Screwdriver Wrench Tool Combo Set - Flat Head ...
M-DRIVE Screwdriver Wrench Tool Combo Set - Flat Head ...
M-DRIVE Screwdriver Wrench Tool Combo Set - Flat Head 3 & 4mm + Cross/Philips 3 & 4mm High quality screwdriver wrench tool set with black anodized aluminium handles and tough HSS steel in the tips. They fit most flat-head and cross/philips headed screws used in RC cars and other radiocontrolled models. Specs: Flat Head Screwdrivers: 3 & 4mm Cross/Philips Screwdrivers: 3 & 4mm Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Material: High quality HSS

199,-

KJØP
Hovedbilde Vant HARD CASE: 7.4V 3300mAh 30C -Round Case Deans
Vant HARD CASE: 7.4V 3300mAh 30C -Round Case Deans
2 Celler lipo – 3300mAh – 30C Ett meget bra lipo batteri i hardcase – rund type. Denne leveres med deans kontakt og XH ballansekontakt Lengde: 133mm Bredde: 44mm Høyde 22.5mm 250gr

399,-

429,-

KJØP
-7%
Hovedbilde BSD 10260 Adapter Traxxas Female To Deans Male
BSD 10260 Adapter Traxxas Female To Deans Male
BSD 10260 Adapter Traxxas Female To Deans Male

49,-

KJØP
Hovedbilde Tamiya 58719 BBX Buggy BB-01 Kit Hovedbilde Tamiya 58719 BBX Buggy BB-01 Kit
Tamiya 58719 BBX Buggy BB-01 Kit
Tamiya’s designers have taken inspiration from its back catalog of iconic 2WD off-road buggies to bring fans of radio control the ALL-NEW BBX! This 1/10 R/C 2WD off-road buggy model features a combination of classic design and modern performance. Its brand-new chassis, reminiscent of 1980’s sand rail dune buggies, is a hybrid monocoque-roll cage and employs rear trailing arm suspension inspired by full-size UTV’s. The new body is designed by famed Japanese artist Atsushi Arino and utilizes a classic 1980’s inspired livery with retro wheels and tires to match! Key Features: • The classically designed 0.7mm thick polycarbonate body is split into three sections to recreate the tapered lower shape of the actual dune buggy. • NEW: Newly designed 2WD chassis is based on the one-piece monocoque frame and roll cage to allow use of realistic bodies. • The BB-01 chassis employs new front double wishbone suspension with A-shaped arms and rear trailing arm suspension with long trailing arms which are inspired by UTVs and give impressive performance. • The 2WD chassis with rear motor features rear-position, inspired by the same layout of the actual vehicles of the era and allows great rear traction. • The four-wheel double wishbone suspension system uses CVA oil front/rear aluminum aeration dampers for impressive performance and classic look. • Transmission uses the TA06 rear oil-filled gear differential which allows the use of many existing Grade-Up parts. • Features full ball bearings and universal drive shafts. • Rear roll cage can be removed by detaching screws, which ensures ease of maintenance around motor. • NEW: New metal-plated bead lock type wheels are paired with NEW large-diameter tires. • Includes driver figure and light cases for extra realism, and 5th spare tire mount adapter. (Spare tire may be purchased separately for added realism) • Requires 2-channel radio, low profile steering servo, 540 motor, ESC, 7.2-7.4volt battery with compatible charger and Tamiya PS paint to complete.   Option parts fra Yeah Racing. Link: Trykk her! Link: Trykk her! Link: Trykk her! Link:  Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her!     About Tamiya 1/10 Buggy BBX (BB-01 Chassis) Announced at Nuremberg International Toy Fair on Feb 2023. Tamiya’s designers have taken inspiration from its back catalog of iconic 2WD off-road buggies to bring fans of radio control the ALL-NEW BBX! This 1/10 R/C 2WD off-road buggy model features a combination of classic design and modern performance. Its brand-new chassis, reminiscent of 1980’s sand rail dune buggies, is a hybrid monocoque-roll cage and employs rear trailing arm suspension inspired by full-size UTV’s. The new body is designed by famed Japanese artist Atsushi Arino and utilizes a classic 1980’s inspired livery with retro wheels and tires to match!   1/10 R/C assembly kit. Length: 414mm, height: 136mm, width: 233mm. Wheelbase: 283mm. The classically designed 0.7mm thick polycarbonate body is split into three sections to recreate the tapered lower shape of the actual dune buggy. ewly designed 2WD chassis is based on the one-piece monocoque frame and roll cage to allow use of realistic bodies. The BB-01 chassis employs new front double wishbone suspension with A-shaped arms and rear trailing arm suspension with long trailing arms which are inspired by UTVs and give impressive performance. The 2WD chassis with rear motor features rear-position, inspired by the same layout of the actual vehicles of the era and allows great rear traction. The four-wheel double wishbone suspension system uses CVA oil front/rear aluminum aeration dampers for impressive performance and classic look. Transmission uses the TA06 rear oil-filled gear differential which allows the use of many existing Grade-Up parts. Features full ball bearings and universal drive shafts. Rear roll cage can be removed by detaching screws, which ensures ease of maintenance around motor. New metal-plated bead lock type wheels are paired with NEW large-diameter tires. Includes driver figure and light cases for extra realism, and 5th spare tire mount adapter. Requires 2-channel radio, steering servo, 540 motor, ESC, 7.2-7.4volt battery with compatible charger and Tamiya PS paint to complete.

3.895,-

4.395,-

KJØP
-11%
Hovedbilde Savox SC-1252MG Plus Servo 7Kg 0,07s Alu Coreless ...
Savox SC-1252MG Plus Servo 7Kg 0,07s Alu Coreless ...
SAVÖX SC-1252MG Plus - Metal-Geared High-Speed Digital Low-Profile Servo V2 The SC-1252MG+ is a high speed, low profile servo which combines leading edge technology with super high 12 bit (4096) resolution. Ideal for 1/10 on-road cars where space is limited and speed is desired. Features: Metal gear train ensures durability under harsh situations Ideal for 1/10 on road vehicles Aluminum case provides cooler operating temperatures New: SSR compatible New: Soft Start Specifications: Voltage range: 4.8-6.6V Torque @ 4.8V: 4.5kg/62.5oz-in Torque @ 6V: 7kg/97.2oz-in Speed @ 4.8V: 0.08 sec/60 deg Speed @ 6V: 0.07 sec/60 deg Dimensions L x W x H: 40.8 x 20.2 x 25.4mm Weight: 44.5g Technical Details: Operating Temperature: -10° to 50°C Running Current (no load): 150mA @4.8V, 180mA @6.0V Stall Current (at locked): 2000mA @4.8V, 3000mA @6.0V Idle Current: 5mA @4.8V, 5mA @6.0V Wire Length: 300 +/- 5mm Output Gear Spline: 25 Tooth Bearings: 2BB Operating Travel: 90° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 950 → 2050 µ second Maximum Travel: Appx 160° (700 → 2300 µ second) Refresh Rate: 240 Hz Motor Type: Coreless

869,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png