Hopp til innhold
Hjem / Radio/Servo/Motor / Radioutstyr / Mottakere / FlySky Mottakere / FlySky FGr4B AFHDS3 Receiver 4CH
-7%

FlySky FGr4B AFHDS3 Receiver 4CH

Art.nr: FS010

649,-

699,-

- 7%

Robitronic
På lager: 5

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Flysky FGr4B 4-kanals mottaker – AFHDS3

 

Flysky FGr4B 4-kanals mottaker med AFHDS3

Flysky FGr4B er en kompakt og pålitelig Flysky mottaker med 4 kanaler og støtte for den avanserte AFHDS3-protokollen. Denne AFHDS3 mottakeren er et godt valg for deg som trenger en Flysky 4-kanals mottaker til RC-bil eller RC-båt.

Trenger du en Noble NB4 mottaker? Flysky FGr4B er kompatibel med Flysky Noble NB4, NB4 Lite, Paladin PL18 og andre radiosendere som støtter AFHDS3.

Mottakeren har doble antenner, støtter toveis kommunikasjon og kan levere PWM-, PPM-, i-BUS- og S.BUS-signaler. Med kompakte mål på bare 17 × 29 × 16 mm passer den i mange forskjellige RC-modeller.

 

Spesifikasjoner

Egenskap Spesifikasjon
Antall kanaler 4 PWM-kanaler
Frekvens 2,4 GHz
Protokoll AFHDS3
Antenner Doble antenner
Driftsspenning 3,5–9 V
Signalutganger PWM / PPM / i-BUS / S.BUS
Temperaturområde -10 °C til +60 °C
Maksimal luftfuktighet 20–95 %
Oppdatering Ja, via nettbasert oppdatering
Dimensjoner 17 × 29 × 16 mm
Vekt 6,4 g
Bruksområde RC-biler, båter m.m.
Kompatible sendere Alle AFHDS3-sendere og RF-moduler, inkludert PL18, Paladin EV, NB4 og NB4 Lite

Viktig om kompatibilitet

Flysky FGr4B benytter AFHDS3-protokollen og er derfor ikke kompatibel med eldre Flysky-sendere som kun støtter AFHDS eller AFHDS2A.

 

On english:

The Flysky FGr4B is a 4-channel receiver for Flysky remote controls. It uses the automatic frequency hopping digital system (AFHDS3) and bidirectional transmission via its antenna. It supports installation and output of PWM/PPM/i-BUS out/S.BUS signals and works with all AFHDS3-capable transmitters.

Specifications:

PWM Channels 4
RF 2.4 GHz
Protocol AFHDS 3
Antennas Dual
Input Voltage 3.5–9 V
Output PWM/PPM/i-BUS out/S.BUS
Temperature Range -10 °C to +60 °C
Max. Humidity 20%–95%
Update Yes, online
Dimensions 17 × 29 × 16 mm
Weight 6.4 g
Suitable For Cars, Boats, etc.
Compatible Transmitter all AFHDS3 transmitters and RF modules (PL18, Paladin EV, NB4, NB4 Lite etc.)

Produsent

Robitronic

Relaterte produkter

 

Hovedbilde Flysky Noble NB4-Pro+ 18-kanal radio inkludert 2 ... Hovedbilde Flysky Noble NB4-Pro+ 18-kanal radio inkludert 2 ...
Flysky Noble NB4-Pro+ 18-kanal radio inkludert 2 ...
Art.nr: FS001P
Copied
Flysky Noble NB4-Pro+ 18-kanal radio inkludert 2 mottakere   FlySky Noble NB4 Pro+ er den kraftigste modellen i NB4-serien. I tillegg til førsteklasses utførelse og et moderne design, imponerer NB4 Pro+ også med svært høy ytelse. Fjernkontrollen er utstyrt med tredje generasjon av 2,4 GHz AFHDS 3-protokollen, som gir ekstremt lav forsinkelse og presis kontroll. Det nye grensesnittet gjør den enkel å bruke, selv for nybegynnere, samtidig som det gir gode muligheter for ulike valgfrie konfigurasjoner. Senderen har en ultrarask 2-kanalsmodus som sikrer svært lav forsinkelse, slik at brukeren får presis kontroll selv i de mest nervepirrende øyeblikkene. 3,5-tommers skjermen er betydelig forbedret sammenlignet med forgjengeren, og har nå høy kontrast og lysstyrke, noe som gjør NB4 Pro+ svært godt egnet til utendørs bruk. I tillegg er USB-C-tilkobling, et forbedret batteri og et system med to batterier blant nyhetene. NB4 Pro+ leveres i et høykvalitets PVC-etui og inkluderer to mottakere, akkurat som forgjengeren.   Funksjoner Avansert og moderne radiosender Innebygd trener-/elevfunksjon Kompatibel med alle iBUS2-enheter og enkelte produkter fra Hobbywing, for eksempel Xerun AXE R2 ESC Fritt konfigurerbare kanaler Ergonomisk design med dreiehjul Kan brukes av både høyre- og venstrehendte Dobbelbatterisystem Intelligent RF-konfigurasjon Svært lav responstid Kan også brukes til simulatorer og lignende applikasjoner (aktivert som standard) Tekniske spesifikasjoner Egenskap Spesifikasjon Type 2,4 GHz ISM Frekvensprotokoll AFHDS 3 Programvareversjon Noble Pro V3.0 Antall kanaler 18 Sendereffekt 17,84 dBm RC-modeller Bil, båt, robot Rekkevidde >300 m (på bakken) Kanaloppløsning 4096 Batteri 1S (4,2 V) 4300 mAh LiPo + 3450 mAh 18650-batteri Varsel ved lav batterispenning < 3,65 V Antennetype Integrert enkeltantenne Skjerm 3,5" IPS-berøringsskjerm, 320 × 480 piksler Maskinvaretilkobling USB / USB-C Temperaturområde -10 °C til +60 °C Luftfuktighet 20–95 % Online-oppdatering Ja Mål 142,7 × 120 × 232 mm Vekt 670 g Dette følger med FlySky NB4 Pro+ radiosender FGr4B-mottaker med kabel FGr8B-mottaker med kabel Solid transportkoffert med nøkkel CNC-frest ratt USB-C-kabel Grepsskall i størrelse S og L Ekstra gasshendel Brukermanual Engelsk The FlySky Noble NB4 Pro+ is the most powerful model in the NB4 series. In addition to high-quality craftsmanship and modern design, the NB4 Pro+ also impresses with top performance. The remote control is equipped with the third-generation 2.4 GHz AFHDS 3 protocol, enabling extremely low latency and precise control. The new interface makes it easy to operate, even for beginners, and offers plenty of room for optional configurations. The transmitter features an ultra-fast 2-channel mode that ensures low latency, allowing users precise control even in the most hair-raising moments. The 3.5-inch display has been significantly improved compared to its predecessor and now boasts a powerful contrast and brightness, making the NB4 Pro+ ideal for outdoor use. Additionally, a USB-C input, a better battery, and a dual battery system are new. The NB4 Pro+ comes in a high-quality PVC case with two receivers, just like its predecessor. Features: Advanced, modern transmitter Includes trainer-student function Compatible with all iBUS2 devices and some Hobbywing products (e.g., Xerun AXE R2 ESC) Freely customizable channels Ergonomic design with swivel wheel Suitable for both right- and left-handed users Dual battery system Intelligent RF configuration Low latency Also usable in simulations and similar applications (enabled by default) Technical Data Type: 2.4GHz ISM Frequency Protocol: AFHDS 3 Software Version: Noble Pro V3.0 Channels: 18 Transmission Power: 17.84dBm RC Models: Car, Boat, Robot Distance: >300m (ground) Channel Resolution: 4096 Battery: - 1S / (4.2V) x 4300mAh LiPo - 3450mAh 18650 Battery Low Voltage Warning: < 3.65V Antenna Type: Built-in Single Antenna Display: 3.5-inch IPS touchscreen, resolution 320x480px Hardware Interface: USB/USB-C Temperature Range: -10°C to +60°C Humidity Range: 20% to 95% Online Update: Yes Dimensions: 142.7 x 120 x 232 mm Weight: 670g Package Contents: FlySky "NB4 Pro+" Transmitter Receiver: FGr4B and Cable Receiver: FGr8B and Cable Hard case including key CNC Steering Wheel USB-C Cable Grip Shell (S, L) Spare Throttle Lever Manual

6.995,-

7.995,-

KJØP
-13%
Hovedbilde Flysky Noble NB4+ with 1 Receiver Hovedbilde Flysky Noble NB4+ with 1 Receiver
Flysky Noble NB4+ with 1 Receiver
Art.nr: FS002P
Copied
Flysky Noble NB4+ with 1 Receiver The FlySky Noble NB4+ is a feature-rich and powerful remote control for the RC car and boat sector. Equipped with the third generation 2.4 GHz AFHDS-3 protocol and in conjunction with the included FGr4B receiver, the NB4+ is suitable as a modern solution for use in teacher-student situations, among other things. The simple operation and clear menu navigation via the touchscreen display makes it easier for even beginners to get started with controlling remote-controlled models. The transmitter features an ultra-fast 2-channel mode that ensures low latency, allowing users to have the most precise control possible - even in the most critical moments. The 3.5 inch display has been significantly redesigned compared to the regular NB4 and now impresses with a really powerful use of contrast and brightness, which makes the NB4+ ideal for outdoor use. Even when the sun shines directly on the screen, everything can be read clearly. The built-in USB-C input is also new, replacing the previously used micro-USB port. Not only does this enable the helpful trainer mode for interactive flight training, but a head tracking device can now be connected to the NB4+ to experience the excitement and pure speed infront of Your own eyes. Features: Advanced, modern transmitter Including extensive teacher-student functions Compatible with all iBUS2 devices as well as some Hobbywing products (e.g. Xerun AX R2 ESC) Ergonomic design with swivel steering wheel Suitable for right-handed and left-handed people Dual battery system Intelligent RF configuration Low latency Can also be used in simulations etc. applications (enabled by default) Technical Specifications: Transmitter Type: 2.4GHz ISM Frequency Protocol: AFHDS 3 Channels: 8 Suited RC Models: Car, Boat Distance: >300m (Ground) Channel Resolution: 4096 Battery: - 1S / (4,2V) x 4300mAh LiPo - 3450mAh 18650 Battery Low Voltage Warning: < 3.65V Antenna Type: External single antenna Display: 3.5 Inch IPS Touchscreen, resolution 320x480px Charging Interface: USB-C Data Interface: USB-C Temperature Range: -10°C to +60°C Humidity Range: 20% to 95% Online Update: Yes Size: 131.41x115.95x190,56mm Weight: 520g  Receiver FGr4B PWM: 4 Type: 2.4GHz ISM Frequency Protocol: AFHDS 3 Suited Transmitters: All transmitters with AFHDS3 support Antenna Type: Single antenna Voltage: 3.5-9V Data Interface: PWM/PPM/i-BUS2/S.BUS/i-BUS Temperature Range: -10°C to +60°C Humidity Range: 20% to 95% Online Update: Yes Size: 17x29x16.6mm Weight: 6.4g Delivery: FlySky "NB4+" transmitter Receiver: FGr4B and cable USB data cable Handle shell (S, L) Springs (S, L) Replacement throttle lever 2x transparent protective film Manual

3.995,-

4.295,-

KJØP
-7%
Hovedbilde FlySky PL18 Paladin Ultra Radio Set Hovedbilde FlySky PL18 Paladin Ultra Radio Set
FlySky PL18 Paladin Ultra Radio Set
Art.nr: FS097
Copied
Description The FlySky PL18 Ultra is a transmitter for RC pilots, including scale models and professional applications. It has fast signal processing, 18 channels and an open operating system developed in cooperation with EdgeTX. Its 3.5" touchscreen has a resolution of 320 × 480 pixels. The transmitter also has Hall sensor sticks. Highlights 01.   3.5" IPS touchscreen (320 × 480 px) with 657 LUX brightness 02.   02Ergonomic design with optimised buttons and tactile feedback; revised user interface 03.   Hall sensor sticks with 4096-step resolution; 18 control channels 04.   AFHDS3 protocol; RF binding modes: Lora, Routine, Classic, Fast and C-Fast 05.   Open OS for individual software configuration 06.   8700 mAh battery for over 16 hours of operation; 12 W wireless charging 07.   USB-C for charging, firmware updates and simulator operation Specifications Transmitter RF Frequency Range 2402.15–2479.85 MHz   General: Transmission Protocol AFHDS3 Channels 18 Channel Resolution 4096 Display 3.5" touchscreen, 320 × 480 px Operating Temperature -10–60 °C Power Supply 1S LiPo (integrated 8700 mAh battery) Charging Port USB-C/Wireless Data Ports USB-C, TEI, DSC 3.5 mm, SD card Dimensions 212.5 × 86.7 × 191 mm Weight 1005 g Firmware Update Yes, online via USB-C   In the box 1 × FlySky PL18 Ultra transmitter 1 × FTr8B receiver 1 × USB-C charging cable 1 × Wireless charger 1 × Carrying case, accessories, and spare parts 1 × User manual     Trykk her! for å laste ned updateringer.

5.795,-

5.995,-

KJØP
-3%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png