Intelligent freewheeling technology, greatly improved performance
The innovative intelligent freewheeling technology enables higher driving efficiency and lower operating temperature of the ESC, and further improves the stability and reliability of the ESC.
Powerful built-in BEC
The ESC has a built-in BEC with a continuous current of 5A and supports a maximum output current of up to 10A. The output voltages are switchable between 6V, 7.4V. This ensures that the ESC is able to support the demanding high-torque servos in the market.
Efficient cooling system
The integrated radiator design, combined with the patented copper thermal conduction sink on the internal power board of the ESC, facilitates the rapid conduction of internal heat to the radiator, and the fan is added to dissipate heat. These results an efficient heat dissipation system to ensure that the ESC is always in a good heat dissipation state.
Capacitor Thermal Protection
Capacitor thermal protection is designed and implemented into the ESC to effectively prevent capacitors from exploding and causing irreversible damages to the ESC due to overloading.
Built-in capacitors
Super large built-in capacitor, The built-in capacitor of the ESC is as high as 1640uF. External capacitors are not needed for 10th scale models on the market and helps improves ease of use.
High protection level, all-weather operation
The IP-67 waterproof Rating guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit.
Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and splash, water and dust resistance are not ermanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product.
Specs:
ESC Programing via:
120A
2-4S
XT60
BEC
IP67
QuicRun 10BL120 G2, 120A børsteløs regulator med sensor. Passer utmerket til 1/10 skala touring, buggy, monster trucks og stadium course biler. Kompatibel med 2-4s LiPo og leveres med XT60-batterikontakt. Denne regulatoren har også en innebygget BEC der du kan velge 6V eller 7.4V. Regulatoren programmeres via LED Program Box (følger ikke med) via programmeringsport. Passer i bruk sammen med QuicRun motorer. ESCen kommer ferdigmontert med 4mm motorkontakter.
Spesifikasjoner
| Dimensjoner (LxBxH) | 52.8x39.8x38.2mm |
| Vekt | 119g |
| LiPo | 2-4S |
| BEC | 6V / 7.4V - 5A |
| Max anbefalt motor 3S | KV4000 3660 |
| Max anbefalt motor 4S | KV2600 4268 |
Varenr HW30501003
Overview This LED program box is for programming HobbyWing brushless ESCs. Its friendly interface makes ESC...
Varenr HW30404400
Sensorløs 2-3S LiPo 1/10 Sensorløs børsteløs motor som blant annet passer 1/10-biler. Denne...
Varenr HW30404401
Sensorløs 2-3S LiPo 1/10 Sensorløs børsteløs motor som blant annet passer 1/10-biler. Denne...
Varenr HW30404402
Sensorløs 2s LiPo 1/10 Sensorløs børsteløs motor som blant annet passer 1/10-biler. Denne...
Ny men leveres uten embalasje. This is the Velineon 380 Brushless Motor from Traxxas. FEATURES: Ultra high-temp...
Overview This LED program box is for programming HobbyWing brushless ESCs. Its friendly interface makes ESC...
Hitec D845WP - Digital Mega Scale Monster Torque Waterproof Servo The D845WP servo is a IP-67 rated servo...
