Traxxas

Traxxas 1589 Double-sided Adhesive Foam Tape 25x25mm (2)

Art.nr: TRX 1589

25,-

Traxxas

Traxxas

På lager: 2

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Traxxas Double-sided Adhesive Foam Tape 25x25mm (2)

Double-sided foam tape for mounting radio gear

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

Hovedbilde Traxxas 2553 Screws Countersunk Machine 3x15mm Revo ...

Traxxas 2553 Screws Countersunk Machine 3x15mm Revo ...

Art.nr: TRX 2553

Copied

This is a package of six 3x15mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x15mm countersunk screw is required INCLUDES: Six 3x15mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS: Length: 15mm Diameter: 3mm

35,-

Hovedbilde Traxxas 1770 Spiked Rear Tire 2.15

Traxxas 1770 Spiked Rear Tire 2.15" (2)

Art.nr: TRX 1770

Copied

This is a pair of replacement tires for the Traxxas line of cars. FEATURES A blend of natural and synthetic rubber in a step pin configuration. INCLUDES 2 tires per package. SPECIFICATIONS: Inside diameter: 2.15" Outside diameter: 3.25" Width: 1.5"

139,-

Hovedbilde Traxxas 1815 Body Washers (8)

Traxxas 1815 Body Washers (8)

Art.nr: TRX 1815

Copied

This is the Traxxas replacement Body Washers. FEATURES: Nylon construction Helps prevent the body mount hole from cracking prematurely White in color SPECS: Outer Diameter: 0.87" (22mm) Inner Diameter: 0.26" (6.7mm) INCLUDES: Eight large body mount washers

29,-

Hovedbilde Traxxas 3646 Flat Head Machine Hex Drive Screws 3x15mm ...

Traxxas 3646 Flat Head Machine Hex Drive Screws 3x15mm ...

Art.nr: TRX 3646

Copied

These are the Traxxas Flat-Head 3 x 15mm Machine Screws. FEATURES: Metal construction Black in color INCLUDES: Six 3 x 15mm Flathead Hex Machine Screws REQUIRES: Installation on the vehicle

35,-

Hovedbilde Traxxas 2546 Countersunk Machine Hex Drive Screws ...

Traxxas 2546 Countersunk Machine Hex Drive Screws ...

Art.nr: TRX 2546

Copied

This is the Traxxas Countersunk 4 x 15mm Screws. FEATURES Metal construction Black in color INCLUDES Six 4 x 15mm countersunk flathead hex screws REQUIREMENTS Installation on the vehicle

35,-

Hovedbilde Traxxas 2563 Screws M3x15mm Roundhead (6)

Traxxas 2563 Screws M3x15mm Roundhead (6)

Art.nr: TRX 2563

Copied

Screws, 3x15mm roundhead machine (6)

19,-

Kunder kjøpte også

Hovedbilde Traxxas 2743 Grub Screws 3mm (12)

Traxxas 2743 Grub Screws 3mm (12)

These are 3mm Grub Screws from Traxxas. FEATURES: Hardened steel construction. Hexagon socket drive insert. INCLUDES: (12) Grub Screws SPECS: Size: 3mm

39,-

Hovedbilde Traxxas 9035 Bumper front bumper support

Traxxas 9035 Bumper front bumper support

Bumper front bumper support

89,-

Hovedbilde Traxxas 9041 Cover Center Driveshaft Hoss 4x4

Traxxas 9041 Cover Center Driveshaft Hoss 4x4

Cover, center driveshaft (clear)

49,-

Hovedbilde Traxxas 9026 Battery Hold-Down Set Hoss 4x4

Traxxas 9026 Battery Hold-Down Set Hoss 4x4

Battery hold-down (2)/ battery clip/ hold-down post/ screw pin/ pivot post screw

99,-

Hovedbilde Traxxas 9022 Chassis Hoss 4x4

Traxxas 9022 Chassis Hoss 4x4

Chassis Hoss 4x4

239,-

Hovedbilde Traxxas 9023 Nerf Bars Chassis Hoss 4x4

Traxxas 9023 Nerf Bars Chassis Hoss 4x4

Nerf bars, chassis (2)

59,-

Hovedbilde Hobbywing QuicRun 10BL120 G2 Brushless ESC 2-4s

Hovedbilde Hobbywing QuicRun 10BL120 G2 Brushless ESC 2-4s

Hobbywing QuicRun 10BL120 G2 Brushless ESC 2-4s

QuicRun WP 10BL120 G2 - Brushless Electronic Speed Controller Intelligent freewheeling technology, greatly improved performance The innovative intelligent freewheeling technology enables higher driving efficiency and lower operating temperature of the ESC, and further improves the stability and reliability of the ESC. Powerful built-in BEC The ESC has a built-in BEC with a continuous current of 5A and supports a maximum output current of up to 10A. The output voltages are switchable between 6V, 7.4V. This ensures that the ESC is able to support the demanding high-torque servos in the market. Efficient cooling system The integrated radiator design, combined with the patented copper thermal conduction sink on the internal power board of the ESC, facilitates the rapid conduction of internal heat to the radiator, and the fan is added to dissipate heat. These results an efficient heat dissipation system to ensure that the ESC is always in a good heat dissipation state. Capacitor Thermal Protection Capacitor thermal protection is designed and implemented into the ESC to effectively prevent capacitors from exploding and causing irreversible damages to the ESC due to overloading. Built-in capacitors Super large built-in capacitor, The built-in capacitor of the ESC is as high as 1640uF. External capacitors are not needed for 10th scale models on the market and helps improves ease of use. High protection level, all-weather operation The IP-67 waterproof Rating guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and splash, water and dust resistance are not ermanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product. Specs: Type: 1/10, Brushless, WP, Sensorless ESC Cont./Peak Current: 120A/760A Input Voltage: 2S-4S Lipo BEC Output: Switch Mode 6V/7.4V @ 5A Input Wires: 12AWG-150MM Input Connector: XT60 Output Connectors: 4mm Gold (female) Size: 52.8x39.8x38.2mm Weight: 119g (Included wires & connectors) Firmware Upgrade: Not Supported Motors: Sensorless / Sensored Brushless Motor (only in sensorless mode) Vehicles: 1/10 Short course trucks & Monster trucks Applicable motors: 3652 & 3660 Size ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Supported LCD G2 Program Box: Supported OTA Programmer: Not Supported Program Port: Separate Program Port PRODUKTINFORMASJON 120A 2-4S XT60 BEC IP67 QuicRun 10BL120 G2, 120A børsteløs regulator med sensor. Passer utmerket til 1/10 skala touring, buggy, monster trucks og stadium course biler. Kompatibel med 2-4s LiPo og leveres med XT60-batterikontakt. Denne regulatoren har også en innebygget BEC der du kan velge 6V eller 7.4V. Regulatoren programmeres via LED Program Box (følger ikke med) via programmeringsport. Passer i bruk sammen med QuicRun motorer. ESCen kommer ferdigmontert med 4mm motorkontakter. Spesifikasjoner Dimensjoner (LxBxH) 52.8x39.8x38.2mm Vekt 119g LiPo 2-4S BEC 6V / 7.4V - 5A Max anbefalt motor 3S KV4000 3660 Max anbefalt motor 4S KV2600 4268

749,-

799,-

-6%

Hovedbilde Traxxas 9038-GRAY Shock Tower Front HD Gray (for ...

Traxxas 9038-GRAY Shock Tower Front HD Gray (for ...

Traxxas 9038-GRAY Shock tower, front, extreme heavy duty, gray (for use with #9080 upgrade kit) Replacement front shock tower for the Extreme Heavy Duty Upgrade Kit. Shock tower is for use with the 9080-series upgrade kit only and will not fit standard suspension parts. Replacement part for these models: Ford® F-150® Raptor R™ 4X4

79,-

Hovedbilde Traxxas 9039-GRAY Shock Tower Rear HD Gray (for ...

Traxxas 9039-GRAY Shock Tower Rear HD Gray (for ...

Traxxas 9039-GRAY - Rear Shock Tower Extreme-HD Gray Shock tower, rear, extreme heavy duty, gray (for use with #9080 upgrade kit) Replacement rear shock tower for the Extreme Heavy Duty Upgrade Kit. Shock tower is for use with the 9080-series upgrade kit only and will not fit standard suspension parts. Replacement part for these models: Ford® F-150® Raptor R™ 4X4

79,-

Hovedbilde Traxxas 9014-GRN Body Stampede 4x4 VXL Green Clipless

Traxxas 9014-GRN Body Stampede 4x4 VXL Green Clipless

Traxxas 9014-GRN Body, Stampede® 4X4 VXL, green (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting) Is it time to upgrade your Stampede® 4X4 VXL with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Stampede 4X4 bodies come fully-assembled and ready to mount with pre-installed body mounts, roof skid, rear body support, and tailgate protector. Replacement part for these models: Stampede® 4X4 VXL (Clipless)

769,-

799,-

-4%

Hovedbilde Tamiya 19805081 Treaded Rear Tires Grasshopper (2)

Tamiya 19805081 Treaded Rear Tires Grasshopper (2)

This is a pair of Rear Treaded Tires for the Tamiya Grasshopper. FEATURES: Rubber, all-terrain treaded tires INCLUDES: One pair of Rear Tires for the Tamiya Grasshopper REQUIRES: Tire glue. SPECS: Width: 1.5" (38mm) Outside Diameter: 3.1" (79mm) Inside Diameter: 1.5" (38mm) COMMENTS: If front tires are needed, order 9805033

109,-

Hovedbilde Traxxas 3170X Battery Holder 4AA with On/Off Switch

Traxxas 3170X Battery Holder 4AA with On/Off Switch

Battery holder, 4-cell/ on-off switch

69,-

Hovedbilde HPI 1146 Firebolt 15T Motor (540 Type)

HPI 1146 Firebolt 15T Motor (540 Type)

THIS PART FITS THE FOLLOWING KITS / PARTS: RS4 SPORT 3 DRIFT TEAM WORTHOUSE NISSAN S15 RS4 Sport 3 Drift 2015 Ford Mustang RS4 SPORT 3 RTR KEN BLOCK 1965 FORD

189,-