Hopp til innhold

Traxxas 9038-GRAY Shock Tower Front HD Gray (for Upgrade Kit #90

Art.nr: TRX 9038-GRAY

79,-

Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Traxxas 9038-GRAY

Shock tower, front, extreme heavy duty, gray (for use with #9080 upgrade kit)
Replacement front shock tower for the Extreme Heavy Duty Upgrade Kit. Shock tower is for use with the 9080-series upgrade kit only and will not fit standard suspension parts.

Replacement part for these models:

  • Ford® F-150® Raptor R™ 4X4

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

This is the Front Differential Housing for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction           Black in color INCLUDES: Two front differential housing halves REQUIRES: Installation around assembled differential components

59,-

Ikke på lager
Driveshaft, center, plastic (black)/ screw pin

59,-

KJØP
Driveshaft, center, 6061-T6 aluminum (red-anodized)

125,-

KJØP
Traxxas 10225 - Roof Skid Pads Skid pads (roof)/ retainers (2)/ 3x10mm CS (6) (fits #10211 body) Replacement rood skids for 10211-series bodies. Includes retainers and screws. Replacement part for these models: Maxx® Slash®

69,-

KJØP
These are 3mm Grub Screws from Traxxas. FEATURES: Hardened steel construction.           Hexagon socket drive insert. INCLUDES: (12) Grub Screws SPECS:    Size:  3mm  

39,-

KJØP
 Bumper front bumper support

89,-

KJØP
  Cover, center driveshaft (clear)

49,-

KJØP
Battery hold-down (2)/ battery clip/ hold-down post/ screw pin/ pivot post screw

99,-

KJØP
Chassis Hoss 4x4

239,-

KJØP
  Nerf bars, chassis (2)

59,-

KJØP
Traxxas Double-sided Adhesive Foam Tape 25x25mm (2) Double-sided foam tape for mounting radio gear

25,-

KJØP
QuicRun WP 10BL120 G2 - Brushless Electronic Speed Controller Intelligent freewheeling technology, greatly improved performance The innovative intelligent freewheeling technology enables higher driving efficiency and lower operating temperature of the ESC, and further improves the stability and reliability of the ESC. Powerful built-in BEC The ESC has a built-in BEC with a continuous current of 5A and supports a maximum output current of up to 10A. The output voltages are switchable between 6V, 7.4V. This ensures that the ESC is able to support the demanding high-torque servos in the market. Efficient cooling system The integrated radiator design, combined with the patented copper thermal conduction sink on the internal power board of the ESC, facilitates the rapid conduction of internal heat to the radiator, and the fan is added to dissipate heat. These results an efficient heat dissipation system to ensure that the ESC is always in a good heat dissipation state. Capacitor Thermal Protection Capacitor thermal protection is designed and implemented into the ESC to effectively prevent capacitors from exploding and causing irreversible damages to the ESC due to overloading. Built-in capacitors Super large built-in capacitor, The built-in capacitor of the ESC is as high as 1640uF. External capacitors are not needed for 10th scale models on the market and helps improves ease of use. High protection level, all-weather operation The IP-67 waterproof Rating guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and splash, water and dust resistance are not ermanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product. Specs: Type: 1/10, Brushless, WP, Sensorless ESC Cont./Peak Current: 120A/760A Input Voltage: 2S-4S Lipo BEC Output: Switch Mode 6V/7.4V @ 5A Input Wires: 12AWG-150MM Input Connector: XT60 Output Connectors: 4mm Gold (female) Size: 52.8x39.8x38.2mm Weight: 119g (Included wires & connectors) Firmware Upgrade: Not Supported Motors: Sensorless / Sensored Brushless Motor (only in sensorless mode) Vehicles: 1/10 Short course trucks & Monster trucks Applicable motors: 3652 & 3660 Size ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Supported LCD G2 Program Box: Supported OTA Programmer: Not Supported Program Port: Separate Program Port PRODUKTINFORMASJON 120A 2-4S XT60 BEC IP67 QuicRun 10BL120 G2, 120A børsteløs regulator med sensor. Passer utmerket til 1/10 skala touring, buggy, monster trucks og stadium course biler. Kompatibel med 2-4s LiPo og leveres med XT60-batterikontakt. Denne regulatoren har også en innebygget BEC der du kan velge 6V eller 7.4V. Regulatoren programmeres via LED Program Box (følger ikke med) via programmeringsport. Passer i bruk sammen med QuicRun motorer. ESCen kommer ferdigmontert med 4mm motorkontakter. Spesifikasjoner Dimensjoner (LxBxH) 52.8x39.8x38.2mm Vekt 119g LiPo 2-4S BEC 6V / 7.4V - 5A Max anbefalt motor 3S KV4000 3660 Max anbefalt motor 4S KV2600 4268

749,-

799,-

KJØP
-6%
Traxxas 9039-GRAY - Rear Shock Tower Extreme-HD Gray Shock tower, rear, extreme heavy duty, gray (for use with #9080 upgrade kit) Replacement rear shock tower for the Extreme Heavy Duty Upgrade Kit. Shock tower is for use with the 9080-series upgrade kit only and will not fit standard suspension parts. Replacement part for these models: Ford® F-150® Raptor R™ 4X4

79,-

KJØP
Traxxas 9014-GRN Body, Stampede® 4X4 VXL, green (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting) Is it time to upgrade your Stampede® 4X4 VXL with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Stampede 4X4 bodies come fully-assembled and ready to mount with pre-installed body mounts, roof skid, rear body support, and tailgate protector. Replacement part for these models: Stampede® 4X4 VXL (Clipless)

769,-

799,-

KJØP
-4%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png