Hopp til innhold
Hjem / Reservedeler/Option-parts / Bil Tilbehør / Lys / 1/10 Scale Orange Light Bar Flat

1/10 Scale Orange Light Bar Flat

Art.nr: 10060

319,-

Modelsport AS

Modelsport AS
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon


Denne LED lys bar'en er perfekt utstyr til din lastebil, truck eller beredskaps kjøretøy. Dimensjonene er dimensjonert for å passe perfekt på ett kjøretøy i 1/10 - 1/14 skala. Det har totalt 16 LED som er kontrollert av to trykk brytere som styrer lys sekvensen. En bryter styrer 8 orange LED på frontpanelet, mens den andre bryteren styrer 8 orange LED på baksiden. Bryterne gir også valg av 9 ulike blitsmodi slik at ulike strobing mønster og effekter. Denne baren vil være den perfekte finish på utvalgte RC eller skala modeller.

Krever 9V batteri.

Produsent

Modelsport AS

Modelsport AS

Kunder kjøpte også

Hovedbilde RC Led Light Kit For Cars And Trucks(12Lights)
RC Led Light Kit For Cars And Trucks(12Lights)
This LED light kit is loaded with features that will make any radio control vehicle that much more awesome! Light up the night with these lights and you will never lose orientation when the vehicle is far away. Install them on your drift car for sick looking drifts. Rock them on your Touring car and have night race sessions. Light up the trail in your crawler and venture out at dusk or dawn. Throw them in your Monster Truck and do flips in the air with style. These LEDs will be an great addition to any RC model, plane, boat, car, you name it, the application is endless. The included left and right amber LEDs flash when you initiate steering input on your transmitter. The bright white LED headlights strobe as you smash the throttle, even better the tail lights light a bright red when you hit the brakes! The install is a breeze as they hook up inline between your servos and receiver.   5mm LED 2 X Blue 4 X White 2 X Red   3mm LED 4 X Yellow  

329,-

359,-

KJØP
-8%
Hovedbilde Tamiya 56536 RC Driver Figure 1/14 Tractor Truck Hovedbilde Tamiya 56536 RC Driver Figure 1/14 Tractor Truck
Tamiya 56536 RC Driver Figure 1/14 Tractor Truck
This is the Driver Figure for Tamiya 1/14 scale Tractor Trucks.     FEATURES Molded plastic construction, white in color  May be attached with double sided tape or cement   INCLUDES Leg, Arm, Head and Torso sections with Instruction Sheet   REQUIREMENTS Painting with Tamiya acrylic paint if desired   SPECIFICATIONS  Approximate Height from Sitting Position: 1.2" (30mm)

109,-

KJØP
Hovedbilde Carson 907064 Scania R470/R620 Top Light Holder
Carson 907064 Scania R470/R620 Top Light Holder
 Holder for the top lights.   Projektørholder til montering på taket av Tamiya Scania R620 / R470. Projektørholderen er laget i forniklet messing. Det medfølger klart og blått lykteglass - mulighet for indbyggning av LED lys

939,-

1.199,-

KJØP
-22%
Hovedbilde Tamiya 56522 LED Light for MFC-01 5mm Light Amber
Tamiya 56522 LED Light for MFC-01 5mm Light Amber
    This is the LED Light (Light Amber)              For the Tamiya MFC-01 Multifunction Control Unit FEATURES: Two light amber LED's on wire with white two-pin connector on end INCLUDES: One LED harness           Two cable ties           One sticker sheet with three cable tags           One aluminum mount with adhesive backing foam           One instruction sheet SPECS:    Length, overall:      28-3/4" (730mm)           Length between LED's: 8-1/8"  (206mm) COMMENTS: This is a part set for the              Tamiya 1/14 Tractor Truck Multi-Function Control Unit

149,-

KJØP
Hovedbilde Traxxas 1951R Driveshafts Rear Steel Spline (2)
Traxxas 1951R Driveshafts Rear Steel Spline (2)
This is a pair of optional Steel Spline Rear Driveshafts for the 1/10 scale Traxxas 2WD Rustler and Stampede.   FEATURES Steel construction  Constant velocity design  Fully assembled   INCLUDES Two Steel Spline Rear Driveshafts

929,-

949,-

KJØP
-2%
Hovedbilde Tamiya 53912 LED Light Orange (2)
Tamiya 53912 LED Light Orange (2)
This is a pair of LED Orange Lights for use with the                    Tamiya TLU-01 LED Light Unit FEATURES: Can be installed on many R/C cars, boats, helicopters  and airplanes             for added realism INCLUDES: Two Tamiya LED Orange Lights with white 2-pin connector REQUIRES: Connecting to TLU-01 LED Light Unit SPECS:    Wire Lead Length: 16"           Diameter: 0.12" (3mm) COMMENTS: Not for use with the 1/14 scale Tamiya electric R/C Big Truck Series.

139,-

KJØP
Hovedbilde Traxxas 3654 Hex Wheel Hub 2.5x10mm Fr ...
Traxxas 3654 Hex Wheel Hub 2.5x10mm Fr ...
        This is a Hex Wheel Hub Set for the Traxxas Rustler and                 Stampede. These parts have more offset than                   the stock hex wheel hub set. FEATURES: Gray plastic construction INCLUDES: Two wheel hubs           Two 2.5mmX10mm axle pins SPECS:    Hex size:          12mm           Width:             .32"         (8mm)

39,-

49,-

KJØP
-20%
Hovedbilde Traxxas 3743A Aluminum Steering Bellcranks Blue ... Hovedbilde Traxxas 3743A Aluminum Steering Bellcranks Blue ...
Traxxas 3743A Aluminum Steering Bellcranks Blue ...
This is the Blue Aluminum Steering Bellcrank from Traxxas. FEATURES: Metal construction, anodized blue in color           Factory assembled and ready to install INCLUDES: One red-anodized T6 aluminum steering bellcrank           Four 5x8mm ball bearings           Hardware REQUIRES: Installation COMMENTS: Also available in red.

379,-

399,-

Ikke på lager
-5%
Hovedbilde Traxxas 5862 Big Bore Shocks Slash (4) Hovedbilde Traxxas 5862 Big Bore Shocks Slash (4)
Traxxas 5862 Big Bore Shocks Slash (4)
This is the optional Big Bore Shock Set for the                          Traxxas Slash.          These replace the plastic shocks that come stock with the kit. FEATURES: Strong aluminum construction, teflon coated           Anodized black with white springs           Completely assembled INCLUDES: Four fully assembled shocks with white springs           Mounting hardware           One bottle of silicone oil REQUIRES: Filling shocks with shock oil and assembling onto the model

799,-

899,-

Ikke på lager
-11%
Hovedbilde Castle Creations Crawler 4-Pole Sensored BL SLate ... Hovedbilde Castle Creations Crawler 4-Pole Sensored BL SLate ...
Castle Creations Crawler 4-Pole Sensored BL SLate ...
This is the Castle Creations 1406 4-Pole 1900Kv Sensored Brushless Motor.       FEATURES For 1/10 scale rock crawlers using 2-4S LiPo batteries and weighing  less than 8lbs (3.6kg), may also be used in more aggressive  setups in lighter 1/10 scale touring cars, stadium trucks or  buggies weighing up to 5lbs (2.3kg)  4 pole 12 slot design for high degree of efficiency and less heat  SMARTSENSE uses motor's sensors to provide smooth starts, excellent  torque and low-speed drivability-once motor is turning it  transitions to sensorless mode  ROAR standard sensor port and labeled connections  High performance 0.2mm steel lamination stacked stator  CNC machined anodized 6061 T-6 aluminum motor can and endbells  Rebuildable design allows replacement of front end bell/bearing  assembly or rotor/shaft assembly     INCLUDES 1406 4-Pole 1900Kv Sensored Brushless Crawler Motor     REQUIREMENTS Electronic Speed Control such as the Castle Creations Mamba Micro X,  Mamba Max Pro, Mamba X or Mamba Monster X     SPECIFICATIONS  Input Voltage Range: 3-4S LiPo  Kv: 1900  Max RPM: 100,000  Length: 1.9" (49.5mm)  Diameter: 1.4" (36mm)  Weight: 6.9oz (197g)  Shaft Length: 0.59" (15mm)  Shaft Diameter: 1.8" (3.17mm)  Mounting Hole Specs: M3 @ 25mm  Connectors: 4mm Male Castle Bullet Connectors attached to 13 gauge  wire  Sensor Wire Length: 8.3" (210mm)

1.395,-

1.495,-

KJØP
-7%
Hovedbilde RC4WD 0061 King of the Road 1.7 Hovedbilde RC4WD 0061 King of the Road 1.7
RC4WD 0061 King of the Road 1.7" 1/14 Semi Truck Tires
King of the Road 1.7" 1/14 Semi Truck Tires A nice cross bread tread design for long road hauling, and offroad applications.   Specifications: OD: 3.42in / 87mm Width: 0.84in / 21.5mm Inner Diameter: 1.7in / 43.18mm Hard Semi Truck Compound (Similar to Tamiya) Each Tire Weight: 1.76oz / 50g   Photo shown mounted on the Hydraulic Dump Truck Wheel (Not Included)   Photo shown mounted on the Hydraulic Dump Truck  (Not Included)     What's Included: 2x King of the Road 1.7" 1/14 Semi Truck Tires Notes: Fits Force Directional Semi Front Wheels w/Spiked Caps (Z-W0053) Fits Force Directional Semi Rear Wheels w/Spiked Caps (Z-W0148) Fits 1/14 8x8 Armageddon Hydraulic Dump Truck (Full Metal) (VV-JD00012)

179,-

KJØP
Hovedbilde Tamiya 56518 PLATED WHEELS (22MM/HEX/MATTE)
Tamiya 56518 PLATED WHEELS (22MM/HEX/MATTE)
Feature: For: Tamiya 1/14 Tractor Truck Material: Plastic Color: Metal-Plated Specification: Width: 20mm Diameter: 47mm

119,-

KJØP
Hovedbilde Traxxas 8035 LED Light Set Complete for Bronco Hovedbilde Traxxas 8035 LED Light Set Complete for Bronco
Traxxas 8035 LED Light Set Complete for Bronco
  TRX-4 Bronco Light Kit - Ultimate Scale Looks and Rock-Solid Durability     The Traxxas TRX-4 Ford Bronco sets the standard for scale appearance out on the trail. The new LED Light Kit (#8035) takes scale realism to the next level with working headlights, tail lights, and side markers. Fully waterproof and built Traxxas-Tough, the LED light kit is ready for your wildest adventures. No matter where the trail leads, day or night, the TRX-4 Ford Bronco will blaze a trail. QUICK FEATURES ON TRX-4 BRONCO LED LIGHT KIT (#8035) Sealed waterproof design Precision-engineered for direct fit on the Bronco body Plug and play design with modular connectors Traxxas LED lighting module Regulated to provide consistent and reliable power output with batteries from NiMH to 3S LiPo Eliminates overheating, glitching, and other electronics issues common with unmatched aftermarket systems Clear headlight lenses with reflectors and amber turn signal lenses

789,-

Hovedbilde Tamiya 86001 PS-1 Polycarbonate Spray White 3 oz
Tamiya 86001 PS-1 Polycarbonate Spray White 3 oz
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-1 White).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable. Lakk maling sprayboks lakkboks ps.

109,-

119,-

KJØP
-8%
Hovedbilde Carson 907199 Support Legs Gearboxed
Carson 907199 Support Legs Gearboxed
This is the Support Legs Gearboxed Motor from Carson. Intended for use on the Carson 907218.

649,-

749,-

KJØP
-13%
Hovedbilde Tamiya 56521 LED Light for MFC-01 3mm Light Amber
Tamiya 56521 LED Light for MFC-01 3mm Light Amber
This is a pair of 3mm Amber LED Lights for use with the      Tamiya #56511 Tractor Truck Multi-Function Unit ,and the                #53957 Multi-Function Control Unit. FEATURES: Light amber LEDs reproduce the yellowish-white light from halogen             lamps INCLUDES: Two 3mm Amber LED Lights with Wire, Connector and Instructions           Two Cable Ties, two Cable Tags SPECS:    Wire Length: 27" (686mm)           LED Light Diameter: 0.12" (3mm) COMMENTS: Cannot be used with the #53909 TLU-01 Tamiya LED Light Unit.

149,-

KJØP
Hovedbilde Carson 906166 LED Light-Set TRUCK Hovedbilde Carson 906166 LED Light-Set TRUCK
Carson 906166 LED Light-Set TRUCK
Description   Truck LED Light Set – Light up your Tamiya Truck! The truck LED light set is a must for all Tamiya truck fans and model makers with an eye for details. The LED unit comes ready to connect and replicates the functions of standard lights to make the model trucks look even more realistic.   The light set comprises of the following: Indicator front / rear Brake light Rear light Head light Demo mode  

419,-

469,-

KJØP
-11%
Hovedbilde Carson 907184 Roof Lights 7,2V SMD LED - 2 pcs.
Carson 907184 Roof Lights 7,2V SMD LED - 2 pcs.
Roof Lights - 7,2V SMD LED - 2 pcs. The Set includes two 7,2V SMD LED's for Tamiya Trucks. Can be used in combination with the Roof Lamp Frames from Carson.

239,-

KJØP
Hovedbilde RC4WD 1/10 Warn 9.5cti Winch
RC4WD 1/10 Warn 9.5cti Winch
This is the RC4C 1/10 scale Warn 9.5cti Winch. FEATURES Designed for use on 1/10 scale RC crawlers  Operates on 6-11V battery, can operate on 3S LiPo battery  Working spring loaded Warn hook with 3' (.9m) synthetic winch rope  Cast aluminum case  Stamped steel components  Easily rebuildable  Same mounting locations as Bulldog winch   INCLUDES RC4C 1/10 scale Warn 9.5cti Winch  Four M2.5x4mm Socket Head Cap Screws  Four M2.5x6mm Socket Head Cap Screws  Warn Decal   REQUIREMENTS Wireless Winch Controller Set(connects directly to a  battery) OR  Wired Winch Control Unit(uses radio's 3rd channel) SPECIFICATIONS  Length: 2.9" (73.68mm)  Total Width: 1.25" (31.75mm)  Height: 1.31" (33.56mm)  Weight: 2.1oz (60g)  Load Limits: Dead Lift 6.6lbs (3kgs)  Load Limits: Rolling Drag 9lbs (4.1kgs) COMMENTS Warn and the Warn name are registered trademarks of Warn Industries.  The Warn logo is property of Warn Industries.

499,-

599,-

KJØP
-17%
Hovedbilde The Police Car Light
The Police Car Light
  1.Electric vehicle / oil motor car installation:         2.Power supply using special attachment plug,the receiver power supply:voltage of 4.8-6V,connected to a power supply start lighting.                                  3.From 360 degrees direction equalization astigmatism,high irradiation,the lights of the latest technology.                                             4.Widely used for accident handing vehicle,simulation lights.       

239,-

KJØP
Hovedbilde Tamiya 10335080 Body fits 58347
Tamiya 10335080 Body fits 58347
This is the Body for the Tamiya Lunch Box. FEATURES: Constructed of styrol (molded plastic), white in color INCLUDES: One body for the Tamiya Lunch Box REQUIRES: Installing on chassis SPECS:    Length: 12"   (308mm)           Width:   5.5" (139mm)           Height:  4.3" (110mm) COMMENTS: Does not include windows or grille section.           Tamiya describes this as a minivan body on their website.  It is             actually a late '70s-early '80s full size panel van design.

299,-

329,-

KJØP
-9%
Hovedbilde Duratrax 2380 Pit Tech Deluxe Truck Stand Blue
Duratrax 2380 Pit Tech Deluxe Truck Stand Blue
This is the Pit Tech Deluxe Truck Stand in Blue from Duratrax. FEATURES Constructed of sturdy, high-impact polystyrene with aluminum center post Wide reinforced base and tall center post is ideal for monster trucks and 1/8 scale buggies and truggies Rotating top plate with dropped center section to accomodate models with uneven chassis Molded rubber strips on upper plate grips chassis securely Easily accessible extra-large parts tray Disassembles to store flat when not in use, or to take to the track INCLUDES Pit Tech Deluxe Truck Stand in Blue from Duratrax SPECIFICATIONS Length: 10" (254mm) Width: 8" (203mm) Height: 4.8" (121mm)       (16)

295,-

KJØP
Hovedbilde Castle Creations CC BEC 10A 6S Switching Regulator
Castle Creations CC BEC 10A 6S Switching Regulator
This is the CC BEC 10A Receiver Battery Eliminator by Castle Creations. FEATURES: Eliminates the need for a receiver and servo battery pack           Draws higher voltage from the motor batteries and drops it to a             voltage level suitable for the receiver and servos INCLUDES: One CC BEC receiver battery eliminator REQUIRES: Installation in the aircraft SPECS:    Length: 1.2" (30mm)           Width:   .6" (15mm)           Height:  .4" (10mm)           Weight:  .4oz (11g)           Input voltage: 5V to 25.2V (2S to 6S LiPo)           Current output: 12 volts input = 7 amps* continuous, 10 amp peak;             24 volts input = 5 amps* continuous, 7 amp peak             *Ratings are determined with a 5mph airflow on the BEC           Selectable Output: 4.8 - 9.0V via the Castle Link (sold separately)             Default voltage is 5.1V

399,-

449,-

KJØP
-11%
Hovedbilde Carson 907071 Light set for Carson/ Tamiya trailers
Carson 907071 Light set for Carson/ Tamiya trailers
Passer til alle Carson trailere Beskrivelse Belysningssettet består af 2 printplater med hver 5 SMD LED, og passer til 7-kammer baklykterne på Carson's trailere. Sette innholder også adapterkabel mellom belysningen og Tamiya's MFC-01 styringsmodul til lastbiler. Sættet indeholder - 2 printplater med 5 SMD LED til 7-kammer baklyshus - Adapterkabel til MFC-01 - Kabel - Veiledning

1.095,-

KJØP
Hovedbilde Tamiya 53910 LED Light White (2)
Tamiya 53910 LED Light White (2)
This is a pair of LED White Lights for use with the                    Tamiya TLU-01 LED Light Unit FEATURES: Can be installed on many R/C cars, boats, helicopters  and airplanes             for added realism INCLUDES: Two Tamiya LED White Lights with white 2-pin connector REQUIRES: Connecting to TLU-01 LED Light Unit SPECS:    Wire Lead Length: 16"           Diameter: (5mm) COMMENTS: Not for use with the 1/14 scale Tamiya electric R/C Big Truck Series.

185,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png