Traxxas

-13%

Carson 907199 Support Legs Gearboxed

Art.nr: 907199

649,-

~~749,-~~

- 13%

Carson

Carson

På lager: 2

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

This is the Support Legs Gearboxed Motor from Carson.

Intended for use on the Carson 907218.

Produsent

Carson

Carson

Carson har mye til Tamiya Lastebiler.

Relaterte produkter

Hovedbilde Carson 907060 GOLDHOFER Loader trailer

Hovedbilde Carson 907060 GOLDHOFER Loader trailer

Carson 907060 GOLDHOFER Loader trailer

Art.nr: 907060

Copied

Fits all Tamiya trucks. These equipment highlights make the set stand out: the divided ramp can be manually folded down for driving operation • 3 axles with twin tyres • suspension with true to original air suspension dummies • ball bearing mounted • steel profile • height adjustable trailer supports • 4-chamber tail lights electrically retrofittable • length of the ramp (poped up) 290 mm.

7.895,-

10.495,-

-25%

Hovedbilde Carson 907218 Trailer Support Legs (Motorized)

Carson 907218 Trailer Support Legs (Motorized)

Art.nr: 907218

Copied

With the motorized support legs to give your CARSON 3-axle dump truck Fliegl Stone Master (907216) is a more prototypical function. To operate two geared motors 907199 needed. Technical Details: Aluminum and Steel

1.749,-

1.999,-

-13%

Hovedbilde Carson 907216 1:14 3-Axle Half Pipe Tip-Up Trailer ...

Hovedbilde Carson 907216 1:14 3-Axle Half Pipe Tip-Up Trailer ...

Carson 907216 1:14 3-Axle Half Pipe Tip-Up Trailer ...

Art.nr: 907216

Copied

The 3-axle Fliegl Stone Master tip-up truck is a precise and licensed scale copy of a real half-pipe for use on construction sites. With the optionally available tipper mechanism, the dump body can be tipped and unloaded. When the dump body is lowered, the tail gate is automatically secured with the 2 hook latches. Needed accessories: No 500907199 Gear engine seat post No 500907218 Seat post driven No 500907166 Gear engine spindle drive No 500907217 Spindle drive No 500907071 Light set for trailers Scope of delivery: Kit with detailed instructions Specifications: Length 660 mm Width 185 mm Height 235 mm Tire width 25 mm Tire Ø 82 mm Weight 7,000 g max . Payload 10.000 g

9.795,-

12.995,-

-25%

Kunder kjøpte også

Hovedbilde Tamiya/ Hobbywing 1060 RTR 60A Brushed ESC WP

Tamiya/ Hobbywing 1060 RTR 60A Brushed ESC WP

Easy Operation This ESC is specially designed for new beginners and intermediate modelers; it not only carries forward the outstanding quality of HOBBYWING products but simplifies the operation. Applicable to All Weather Conditions The waterproof and dust-proof design allows the QUICRUN WP-1060 Brushed to be used in all weather conditions without any issue of damage caused to the ESC from water or dust. High Reliability & Durability Reliable hardware combined with advanced software technology allows the QUICRUN WP 1060 Brushed to not only provide high power output but also overload protection of the ESC circuit. Easy to Use This ESC features auto throttle calibration and parameter setting via jump caps is easy-to-use, especially applicable to new beginners. Wide Application This ESC is designed for 1/10th scale touring cars, buggies, short-course trucks, monster trucks, trucks, crawlers and tanks. Waterproof Cont./Peak Current - 60A/360A Input - 2-3S LiPo/5-9 Cells NiMH BEC Output - Switch Mode:6V/3A Motor Limit - 2S Lipo or 6 NiMH - 540 or 550 Size Motor: 12T or RPM 30000 - 7.2V 3S Lipo or 9 NiMH - 540 or 550 Size Motor: 18T or RPM 20000 - 7.2V Input Wires - Red-16AWG-100mm/Black-16AWG-100mm Output Wires - Blue-16AWG-100mm/Yellow-16AWG-100mm Input Connectors - Big-sized TAMIYA Connector Output Connectors - 4.0 Bullet Connectors (Female) Size - 36.5x32.0x18.0mm Weight - 39g Motors - Brushed Motors Suitable for: 1/10 Touring Car, Buggy, Short Course, Truck, Monster, Truggy, Rock Crawler and Tank. This item is supplied in supass packaging. It is a 100% genuine HobbyWing speed controller..

399,-

429,-

-7%

Hovedbilde Gens Ace 7.2V 5000mAh - NiMh - Tamiya

Hovedbilde Gens Ace 7.2V 5000mAh - NiMh - Tamiya

Gens Ace 7.2V 5000mAh - NiMh - Tamiya

Gens Ace NiMh batteripakke på 7,2V og 5000mAh med Tamiya kontakt. Type NiMh Spenning 7,2V Kapasitet 5000mAh Kontakt Tamiya Ledninger 14AWG Lengde 138mm Bredde 48mm Høyde 25mm Vekt 424g

439,-

Hovedbilde Vant 61-1004 3300mAh 7.2v NiMh Tamiya plug

Vant 61-1004 3300mAh 7.2v NiMh Tamiya plug

Kvalitets NiMh pakke med meget høye utladings egenskaper! Rimelig pakke som leverer! Kapasitet på 3300 mAh Spenning er 7.2V TAMIYA CONNECTOR Lengde: 135mm Høyde: 24mm Bredde: 46mm

299,-

329,-

-9%

Hovedbilde Carson 907605 PALLET WITH BOXBOARD 1:14

Hovedbilde Carson 907605 PALLET WITH BOXBOARD 1:14

Carson 907605 PALLET WITH BOXBOARD 1:14

Europall som er lastet med papp, og pakket i folie. Utrolig flott og realistisk. Den har også god vekt og ligger derfor støtt. Leveres stykk vis. Tekniske data: Skala 1:14 Dim. (LxBxH) 85x70x72mm Vekt 266 g

259,-

Hovedbilde Carson 907099 Pallet of wood 1:14

Hovedbilde Carson 907099 Pallet of wood 1:14

Carson 907099 Pallet of wood 1:14

CARSON Pallet of wood 1:14

99,-

Hovedbilde Tamiya 56502 1/14 Semi-Trailer Light Set

Hovedbilde Tamiya 56502 1/14 Semi-Trailer Light Set

Tamiya 56502 1/14 Semi-Trailer Light Set

This is a Hop-Up Light Kit for the Tamiya Semi-Trailer (56302) that is used with the Tamiya King Hauler (56301). FEATURES: These lights are for brake lights (one left and one right) and turn signal (or "blinker") lights (one left and one right). The bulbs are clear and installed behind the brake and turn signal lenses (just like a real car/truck). INCLUDES: One Light Set: Brake and blinker lights, light cable (that runs the length of the trailer) and plug (to plug into connector cable). One Connector Cable: Connects the light set to the circuitry board on the tractor (the circuitry board is included in the tractor light set). One Rubber Bushing: To protect the light cable where it passes throught the front of the trailer. One Plastic Bushing: To protect the light wires where they pass through the floor of the trailer to the rear bumper. Two Nuts(2mm), two Bolts(2x15mm) and Two Washers(2mm): For mounting the plug receptacle in the tractor body. One Double-Sided Tape One Illustrated instructions REQUIRES: This light set is powered by the 6-cell motor battery in the tractor. Must use the Tractor Lights 56501 also to make functional.

529,-

569,-

-7%

Hovedbilde Carson 907217 Spindle drive for Stone Master

Hovedbilde Carson 907217 Spindle drive for Stone Master

Carson 907217 Spindle drive for Stone Master

NB! Denne skal ha motor 907166 Product Description Spindle drive for Fliegl Stone Master, the toggle pin "Z bar" for the motorized drive of the trough gives the CARSON 3-axle dump trucks Fliegl Stone Master a more prototypical function. For Operating a geared motor required. Technical specifications: Material aluminum with steel bolts / shafts

3.095,-

3.595,-

-14%

Hovedbilde Savox SC-0254MG Plus Servo 7,2Kg 0,14s Metal Gear

Hovedbilde Savox SC-0254MG Plus Servo 7,2Kg 0,14s Metal Gear

Savox SC-0254MG Plus Servo 7,2Kg 0,14s Metal Gear

Savox SC-0254MGPLUS - Standard Sized Digital Servo with Soft Start 0.14sec 7.2kg/cm @ 6V The Savox SC-0254MG Plus is a high torque, metal-geared, digital, standard servo. A great replacement for standard, plastic-geared servos with less torque. Features: Soft Start Sanwa SSR compatible Metal gear train ensures durability under harsh situations Higher torque output than standard servos Ideal for 30-60 size aircraft, and some car applications Leading edge digital servo technology Strong 3-Pole Brushed motor Accurate and fast response Fine resolution Composite case Ball bearings Specifications: Torque @ 4.8v: 6.9kg/cm Torque @ 6v: 7.2kg/cm Speed @ 4.8v: 0.19s/60deg Speed @ 6v: 0.14s/60deg Dimensions: L40.7 x W20 x H39.4mm Weight: 49g Operating Temperature: -10° to 50°C Running Current (no load): 220mA @4.8V, 240mA @6.0V Stall Current (at locked): 1300mA @4.8V, 1500mA @6.0V Idle Current: 6mA @4.8V, 6mA @6.0V Wire Length: 300 +/- 5mm Output Gear Spline: 25 Tooth Bearings: 2BB Operating Travel: 120° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 800 → 2200 µ second Maximum Travel: Appx 164° (800 → 2200 µ second) Refresh Rate: 240 Hz Motor Type: Brushed

389,-

419,-

-7%

Hovedbilde Carson 907166 Gear Motor For Spindle Drive Fligel ...

Carson 907166 Gear Motor For Spindle Drive Fligel ...

Spindle drive motor spesielt for Carson sin Fliegl stone master henger.

1.295,-

1.495,-

-13%

Hovedbilde Carson 907071 Light set for Carson/ Tamiya trailers

Carson 907071 Light set for Carson/ Tamiya trailers

Passer til alle Carson trailere Beskrivelse Belysningssettet består af 2 printplater med hver 5 SMD LED, og passer til 7-kammer baklykterne på Carson's trailere. Sette innholder også adapterkabel mellom belysningen og Tamiya's MFC-01 styringsmodul til lastbiler. Sættet indeholder - 2 printplater med 5 SMD LED til 7-kammer baklyshus - Adapterkabel til MFC-01 - Kabel - Veiledning

1.095,-

Hovedbilde Tamiya 56505 Motorized Support Legs Tractor Trailer

Tamiya 56505 Motorized Support Legs Tractor Trailer

This is a Great Hop-Up to add Realism to your Tamiya King Hauler kit. INCLUDES: Two AA battery cases One RS-29 motor Two battery case connectors (these are used to connect the 2 battery cases) One battery terminal A One battery terminal B One tube of silicone grease (1/4 oz., for the gears) One coupler plate A One servo plate One switch plate One worm gear (acts kind of like a pinion) One 28 teeth / 12 teeth counter gear One 36 teeth / 10 teeth counter gear One 40 tooth gear Two return springs One inner spring Four rack springs One 2x67 mm threaded shaft One 2x50 mm threaded shaft One 3/4" x 4 3/4" double sided tape One 20x20 mm double sided tape One shift gate (used on the transmitter as a guide) Three nylon adjusters (a.k.a. 4mm ball cups) One 5x40 mm rubber tubing One 4-way wrench Two metal racks Two joint cups Two metal rack pinion Two pinion shaft Two 5mm washers Two 5x8 mm bronze bushings Two 3x7 mm bronze bushings One drive shaft One brass hex hub One hex wrench One brass rod nut One on/off switch Two coupler nuts Two 4 mm ball connectors Two 4 mm e-ring Four spring pins Four 3x3mm grub screw (a.k.a. hex screw) Two 2 mm e-rings Two 2 mm washers Five 2.5x8mm socket head cap screws Nine 2x8mm screws Thirteen 2x8mm screws Six 2 mm nuts Four 3x10mm flanged screws Two 3mm nuts Four 3x6mm flat head screws Two 3x8mm screws Three 3x8 mm self tapping screws Two gear box halves (black molded nylon) One trailer hitch (nylon) One hitch plate (nylon) Two nylon leg guides Two nylon swivel arms Two nylon mounting arms REQUIRES: One Standard Servo and Four "AA" size batteries.

899,-

949,-

-5%

Hovedbilde Carson 906166 LED Light-Set TRUCK

Hovedbilde Carson 906166 LED Light-Set TRUCK

Carson 906166 LED Light-Set TRUCK

Description Truck LED Light Set – Light up your Tamiya Truck! The truck LED light set is a must for all Tamiya truck fans and model makers with an eye for details. The LED unit comes ready to connect and replicates the functions of standard lights to make the model trucks look even more realistic. The light set comprises of the following: Indicator front / rear Brake light Rear light Head light Demo mode

419,-

469,-

-11%

Hovedbilde Carson 907038 6-chamber tail lights

Carson 907038 6-chamber tail lights

6-chamber tail lights For trucks. Can be lightened. Content: 2 items.

319,-

Hovedbilde Tamiya 56515 Aluminum Oil Damper for Tractor Truck (2) ...

Tamiya 56515 Aluminum Oil Damper for Tractor Truck (2) ...

This is a pair of Tractor Truck optional Aluminum Oil Dampers from Tamiya. FEATURES: Fits the Tamiya 1/14 scale tractor trucks Replaces the stock plastic body shocks Realistic scale appearance INCLUDES: Two Unassembled Shocks 9cc Bottle of Shock Oil Wrench and Instruction Sheet

369,-

Hovedbilde 1/10 Scale Orange Light Bar Flat

1/10 Scale Orange Light Bar Flat

Denne LED lys bar'en er perfekt utstyr til din lastebil, truck eller beredskaps kjøretøy. Dimensjonene er dimensjonert for å passe perfekt på ett kjøretøy i 1/10 - 1/14 skala. Det har totalt 16 LED som er kontrollert av to trykk brytere som styrer lys sekvensen. En bryter styrer 8 orange LED på frontpanelet, mens den andre bryteren styrer 8 orange LED på baksiden. Bryterne gir også valg av 9 ulike blitsmodi slik at ulike strobing mønster og effekter. Denne baren vil være den perfekte finish på utvalgte RC eller skala modeller. Krever 9V batteri.

319,-

Hovedbilde MIP 9201 - MIP 1/16 Hex Driver Wrench Gen 2

Hovedbilde MIP 9201 - MIP 1/16 Hex Driver Wrench Gen 2

MIP 9201 - MIP 1/16 Hex Driver Wrench Gen 2

This is a 1/16" Thorp Hex Driver from MIP. MIP has picked up the Thorp hex drivers to carry on the tradition of quality that the old Thorp ball end drivers brought you. FEATURES High Quality Steel Construction Tip Precision Cut Tip for Accuracy Durable Plastic Handle High Grip Handle INCLUDES One 1/16" Hex Driver REQUIREMENTS Nothing COMMENTS The tips are non replaceable, but if you send the driver into MIP they will regrind the tip for you for a small fee. MIP will also regrind the older Thorp drivers as well.

229,-

259,-

-12%

Hovedbilde MIP 9208 2.0mm Hex Driver Wrench Gen 2

Hovedbilde MIP 9208 2.0mm Hex Driver Wrench Gen 2

MIP 9208 2.0mm Hex Driver Wrench Gen 2

#9208 - MIP 2.0mm Hex Driver Wrench Gen 2 MIP Gen 2 Tools: Same Iconic Look, Amplified Awesomeness! For over 30 years, MIP tools have been the go-to gear for RC enthusiasts who demand the best. The iconic amber handles and rock-solid build have become synonymous with precision, performance, and passion. But even legends deserve an upgrade, and that's where the all-new MIP Gen 2 tools come in. No More Wrench Wraps! MIP Gen 2 tools now boast laser-etched size markings that are clear, crisp, and impossible to miss. Plus, each tool now sports a vibrant color-coded ring for instant identification. Consistency is King: The MIP Gen 2 line is designed to create a cohesive look and feel across your entire tool collection. The subtle yet impactful design tweaks reinforce the iconic MIP identity, making it easier than ever to spot those legendary amber handles in your toolbox. It's not just about aesthetics, it's about building a sense of confidence and reliability that comes from knowing you're using the best. Evolution, Not Revolution: Don't worry, the core of what makes a MIP tool a MIP tool remains unchanged. The rock-solid construction, the precise tolerances, the uncompromising quality – it's all there, just enhanced and refined. The Gen 2 update is about building on the legacy, not abandoning it. It's about taking the tools you love and making them even more awesome while making every tweak, tune, and adjustment smoother, faster, and more satisfying than ever before. So, are you ready to experience the next level of RC tool awesomeness? Experience the future of RC tools with MIP Gen 2 Tools! Package Includes: 1 x .2.0mm Hand Wrench Tool Makeup: Precision Ground with Diamond wheels to remove internal stress and part fatigue Made from US Grade tool steel drill blanks Tight tolerances held within 20 Microns which is .02 mm and moreover .0008 in. ! To put that into perspective that's like taking a human hair and dividing it by 4 ! Super Comfy to the hand, Acetate Handles that are resilient to hot and cold weather so won't harm your hands in poor weather conditions. Every tool assembled by hand Manufactured and packaged 100% in the USA Accolades: Highly regarded as the #1 Tool in the RC industry for almost 30 years of production. Used by World Champions and hobbyists alike around the World Trusted wrench to get out stripped screws other sub par tools create World Class Products, Precision Tools, Race Proven Performance, That's MIP!

299,-

Hovedbilde Carson 907218 Trailer Support Legs (Motorized)

Carson 907218 Trailer Support Legs (Motorized)

With the motorized support legs to give your CARSON 3-axle dump truck Fliegl Stone Master (907216) is a more prototypical function. To operate two geared motors 907199 needed. Technical Details: Aluminum and Steel

1.749,-

1.999,-

-13%