Traxxas

Zap PT35 Z-Poxy 15 Minute 4oz

Art.nr: pt35

239,-

Zap

Zap

** Ikke på lager

Midlertidig utsolgt – kan bestilles

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

This is the 4oz Zap Z-Poxy 15 Minute Epoxy Resin from Pacer.

FEATURES

Cures completely clear
Easy to sand and has excellent gap filling characteristics
Z-Poxy is specially formulated to bond to fiberglass, wood,
metals, and plastics
Resistant to shock and solvents
Non-brittle, non-shrinking
Produces a tough permanent bond in just 30 minutes

INCLUDES

2oz of 15 Minute Z-Poxy Resin
2oz of 15 Minute Z-Poxy Hardener

COMMENTS

This product contains epoxy resin and polymercaptan hardener. In case
of skin contact, wash thoroughly with soap and water. In case of
contact with eyes, flush with water for 15 minutes. Call a
physician. If swallowed, seek medical advice immediately and show
container label. Use in well ventilated area. Keep out of the
reach of children.

Produsent

Zap

Zap

Kunder kjøpte også

Hovedbilde JPerkins ALIPHATIC RAPID GIANT 500G

JPerkins ALIPHATIC RAPID GIANT 500G

ALIPHATIC RAPID GIANT 500G

299,-

** Ikke på lager

Hovedbilde Dynomax 9231 Wire Red & Black 22AWG D0.6/1.7mm x 1m

Dynomax 9231 Wire Red & Black 22AWG D0.6/1.7mm x 1m

D-MAX Wire Set Red & Black - 22AWG 1+1m This is a high quality wire with a high amount of copper strands making it very suitable for RC models and other hobby projects. The wire is covered with a silicone based insulation material and together with the high strand count it’s also very flexible. Short and Thick is Good In electric high powered models we are recommending you to use short and as thick wires as possible (within reason) together with a matching diameter/area connector system for optimum performance. Specifications: Length: 1+1m AWG Wire: 22 Area Wire: 0.34mm2 Diameter Wire: 0.6mm Diameter Insulation: 1.7mm Wire: 60 Strands of Copper @ 0.08 mm Insulation: Silicone Based

29,-

** Ikke på lager

Hovedbilde Tamiya 81041 Paint Mixing Jar

Tamiya 81041 Paint Mixing Jar

Glass-krukke for å blande maling med 23cc kapasitet. Mindre størrelse på glasset er perfekt for å forberede små mengder maling og blandinger. Lokket er med pakning som er tett, slik at lagring av akryl, emalje eller lakk maling er problemfritt. Glasset har graderinger i 5 ml intervaller trykt på siden.

35,-

På lager 6

Hovedbilde OS 71608001 Glow Plug No.8

Hovedbilde OS 71608001 Glow Plug No.8

OS 71608001 Glow Plug No.8

Glow Plug No.8

99,-

** Ikke på lager

Hovedbilde Du-Bro 340 Fuel Filter Medium

Du-Bro 340 Fuel Filter Medium

INFORMATION This is a Medium In-Line Fuel Filter from Du-Bro. Constructed of two threaded aluminum parts which separate for ease in cleaning. Includes a 130 micron mesh screen filter to filter out the smallest of particles and an O-ring to properly seal against leakage. Suitable for gasoline or glow fuel. Is installed in fuel tubing between the carburetor and fuel tank. Fits 2.4 mm (3/32") id tubing. This is a Medium In-Line Fuel Filter from Du-Bro. Constructed of two threaded aluminum parts which separate for ease in cleaning. Includes a 130 micron mesh screen filter to filter out the smallest of particles and an O-ring to properly seal against leakage. Suitable for gasoline or glow fuel. Is installed in fuel tubing between the carburetor and fuel tank. Fits 2.4 mm (3/32") id tubing. INCLUDES One Medium In-Line Fuel Filter REQUIREMENTS 2.4 mm (3/32") id fuel tubing SPECIFICATIONS Length: 28 mm This is a Medium In-Line Fuel Filter from Du-Bro. Constructed of two threaded aluminum parts which separate for ease in cleaning. Includes a 130 micron mesh screen filter to filter out the smallest of particles and an O-ring to properly seal against leakage. Suitable for gasoline or glow fuel. Is installed in fuel tubing between the carburetor and fuel tank. Fits 2.4 mm (3/32") id tubing. INCLUDES One Medium In-Line Fuel Filter REQUIREMENTS 2.4 mm (3/32") id fuel tubing SPECIFICATIONS Length: 28 mm INCLUDES One Medium In-Line Fuel Filter REQUIREMENTS 2.4 mm (3/32") id fuel tubing SPECIFICATIONS Length: 28 mm Width: 11 mm

99,-

109,-

** Ikke på lager

-9%

Hovedbilde Zap PT38 Adhesives Z-Poxy 5-Minute 8 oz

Zap PT38 Adhesives Z-Poxy 5-Minute 8 oz

Pacer's 5 Minute Z-Poxy is Resistant to Shock and Solvents, is Non-Brittle, Easy to Sand and has Excellent Gap Filling Characteristics. FEATURES: Cures Completely Clear Z-Poxy is Specially Formulated to Bond to Fiberglass, Wood, Metals and Plastics. INCLUDES: 4oz of 5 Minute Z-Poxy Resin 4oz of 5 Minute Z-Poxy Hardener COMMENTS: The Total Working Time of this Glue is 3 Minutes and Fully Cures in 5 Minutes. This product contains Epoxy resin and Polyamide resin, some people are allergic to these compounds.

369,-

** Ikke på lager

Hovedbilde Zap PT-02 Adhesives Zap-A-Gap CA+ 1 oz

Zap PT-02 Adhesives Zap-A-Gap CA+ 1 oz

This is a 1oz Bottle of Zap-A-Gap CA+ Glue from Pacer. Not safe for foam. For foam applications use epoxy or foam-safe CA. FEATURES: Superior gap filling formula. Medium viscosity. Allows approximately 7-10 seconds for part positioning. Average of 20 seconds curing. Works on oily surfaces also. Use Zip Kicker to accelerate cure time. INCLUDES: One 1oz Bottle of Zap-A-Gap CA+ Glue. SPECS: 1oz (28.4g)

129,-

139,-

** Ikke på lager

-7%

Hovedbilde Zap PT-20 Adhesives Slo Zap CA- 1 oz

Zap PT-20 Adhesives Slo Zap CA- 1 oz

This is a 1oz Bottle of Slo-Zap CA Glue from Pacer. Not safe for foam. For foam applications use epoxy or foam-safe CA. FEATURES: Very high viscosity formula. Super thick and super strong. Allows approximately 30-40 seconds for part positioning. Cures in 90 seconds. Ideal for fillet forming, gap filling, wing sheeting, laminating, etc. Use Zip Kicker to accelerate cure time. INCLUDES: One 1oz Bottle of Slo-Zap CA Glue. SPECS: 1oz (28.4g)

139,-

** Ikke på lager

Hovedbilde Z-POXY 5-MIN 4OZ (6) PT37

Z-POXY 5-MIN 4OZ (6) PT37

Product Details: Clear, equal mix Cures in 5 minutes Fuel-proof, vibration resistant formula Flexible and durable Sandable Excellent for furniture Works best on: Metal, Wood, Rubber, Aluminium, Ceramic, Furniture

249,-

** Ikke på lager

Hovedbilde Traxxas 8247X Servo Horn Steering Metal TRX-4

Traxxas 8247X Servo Horn Steering Metal TRX-4

Servo horn, steering, metal/ 3x14 BCS (1) Spline: 25T

79,-

På lager 1

Hovedbilde SkyRC 500024-01 GSM-015 GPS GNSS Speed Meter

Hovedbilde SkyRC 500024-01 GSM-015 GPS GNSS Speed Meter

SkyRC 500024-01 GSM-015 GPS GNSS Speed Meter

SkyRC GSM-015 GNSS GPS Speed Meter Stop wondering how fast your RC car can run and how high your RC Airplane or helicopter can fly. Now all these data come at your finger with the GNSS SPEED METER by SkyRC. This gadget is ideal for RC racing/flying and casual biking, driving and long journey. The user could easily view the screen while working out data such as speed, altitude, total mileage, longitude/latitude. It also records the top speed and top altitude for instant recall after the running and helps RC fans much to fine-tune their RC gadgets for better performance. Measure Top Speed, Average Speed and Top Altitude The user could easily view the screen while working out data such as speed, altitude, total mileage/kilometer, longitude/latitude. It also records the top speed and top altitude for instant recall after the running and helps RC fans much to fine-tune their RC gadgets to achieve better performance. Concurrent reception of GPS & GLONASS GSM-015 supports GNSS(Global Navigation Satellite System) with GPS and GLONASS system that means more satellites are orbiting the earth. The advantage of this many satellites will improve positional accuracy by tracking two satellite constellations instead of just GPS. Built-in 1M Memory & Update frequency up to 10Hz Update frequency is changeable from 1Hz to 10Hz. The higher update frequency is, the more accurate data the user will get. The built-in memory is 1M and can keep recording for 18 hours at 1Hz update frequency. And all the data can be transferred to PC and Mac show on Bing Maps. When the Flash is full, the previous record will be replaced automatically. No need to think about clearing data all the time or worry about missing the critical tracking data, when the memory is full. Support both Metric and Imperial system of Measurement The Metric and Imperial systems can be switched easily at the user’s finger. Hold and press the MODE button to change. PC link for data logging & Bing Maps The GNSS LOGGER software is compatible with Windows 7 and above or macOS 10.12 and above. With GNSS LOGGER, the user could. Specs: Concurrent reception of GPS & GLONASS Receiver: L1, 1575.42 MHZ Update frequency: 10 Hz Antenna type: Built-in Satellite signal reception sensitivity: -167dBm Dimensions: 65.7 x 39.6 x 20.8mm Weight: 45g Operating temperature: 0°C to +40°C Storage temperature: -10°C to +70°C Operating humidity: 5% to 90% GNSS Logger: For MAC click Here For PC click Here

995,-

På lager 1

Hovedbilde Traxxas 6487R Gear, 15-T pinion (machined) (1.0 metric ...

Traxxas 6487R Gear, 15-T pinion (machined) (1.0 metric ...

Gear, 15-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

129,-

139,-

** Ikke på lager

-7%

Hovedbilde Traxxas 6488X Gear 14T Pinion XO-1

Traxxas 6488X Gear 14T Pinion XO-1

This is the 14 Tooth 1.0 Metric Pitch Pinion Gear for the Traxxas XO-1 On-Road Car FEATURES: Hardened steel construction Fits 5mm diameter motor shafts INCLUDES: 14 Tooth 1.0 Metric Pitch Pinion Gear

49,-

På lager 2

Hovedbilde Savox SC-0252MG PLUS - 0.19speed/10.5kg

Hovedbilde Savox SC-0252MG PLUS - 0.19speed/10.5kg

Savox SC-0252MG PLUS - 0.19speed/10.5kg

Savöx Digital Servo SC-0252MG 4.8V Speed: 0.23 6.0V Speed: 0.19 4.8V Torque: 7.2 kg-cm 6.0V Torque: 10.5 kg-cm Dimensions: 40.7 x 19.6 x 39.4mm Weight: 49 gram Gear: Metal Ballbearing: 2

399,-

439,-

På lager 3

-9%

Hovedbilde Traxxas 3934A Body Clips Heavy Duty Black (12)

Traxxas 3934A Body Clips Heavy Duty Black (12)

Body clips, heavy duty (black) (12)

39,-

49,-

På lager 12

-20%

Hovedbilde LouiseRC 3209C Tire & Wheel ST-Hummer 2,8

LouiseRC 3209C Tire & Wheel ST-Hummer 2,8" Chrome ...

0-Offset for 2WD Rear Fits: Traxxas STAMPEDE 2WD Rear Traxxas STAMPEDE VXL 2WD Rear Traxxas RUSTLER 2WD Rear Traxxas RUSTLER VXL 2WD Rear Traxxas SKULLY 2WD Rear Traxxas CRANIAC 2WD Rear Arrma Vorteks Mega 2WD Front & Rear Arrma Vorteks BLS 2WD Front & Rear Arrma Granite Mega 2WD Front & Rear Arrma Granite BLS 2WD Front & Rear Team Durango DEST210 2WD Front & Rear Kyosho Rage 2WD Front & Rear Kyosho Mad Bug 2WD Front & Rear Also fits other 1/10 Scale Monster Trucks with 12 mm hex Specs: Wheel diameter: 2.8" Tire Diameter: 102 mm Tire Width: 52 mm Weight (each): 125 g Hex: 12 mm Offset: 0" Tire Compound: Soft Wheel finish: Chrome Nylon

299,-

329,-

** Ikke på lager

-9%

Hovedbilde Traxxas 6723 Chassis Rustler 4x4

Traxxas 6723 Chassis Rustler 4x4

Dette produktet er gått ut, og er erstattet av dette: https://www.samirc.no/products/traxxas-6723r-main-chassis-long-battery-rustler-4x4 Chassis Rustler 4x4

Kontakt oss for mer informasjon om dette produktet

Hovedbilde Traxxas 7430X Bulkhead, front

Traxxas 7430X Bulkhead, front

Bulkhead, front

69,-

79,-

På lager 1

-13%

Hovedbilde Tamiya 10005472 F parts.

Tamiya 10005472 F parts.

OBS: Kun ett brett med deler. Ønsker du å ha et fult sett med F-parts må du bestille to brett, dvs to av denne varen. Tamiya 10005472 F parts. F parts for 56301. F parts for 56327 Scania R620

119,-

** Ikke på lager

Hovedbilde Tamiya 86023 PS-23 Polycarb Spray Gunmetal 3 oz

Tamiya 86023 PS-23 Polycarb Spray Gunmetal 3 oz

This is Tamiya Color Spray Lacquer for Polycarbonate (PS-23 Gun Metal). For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. An appropriate amount of paint for finishing one R/C model. This paint is impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS: Net Volume: 100ml COMMENTS: Never use this paint on plastic models. Highly flammable.

109,-

På lager 3

Hovedbilde Tamiya 86015 PS-15 Polycarbonate Spray Metal Red 3 oz

Tamiya 86015 PS-15 Polycarbonate Spray Metal Red 3 oz

This is Tamiya Color Spray Lacquer for Polycarbonate (PS-15 Metallic Red). For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. An appropriate amount of paint for finishing one R/C model. This paint is impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS: Net Volume: 100ml COMMENTS: Never use this paint on plastic models. Highly flammable.

109,-

På lager 7

Hovedbilde Pro-Line 349500 Interior (Clear) for 1/10 Crawler ...

Hovedbilde Pro-Line 349500 Interior (Clear) for 1/10 Crawler ...

Pro-Line 349500 Interior (Clear) for 1/10 Crawler ...

This is a Classic Interior for Rock Crawling Bodies. Pro-Line is proud to introduce a Classic Interior for all of our old-school Scale Truck Fans! The Classic Interior features a Bench style front seat for added scale realism and fits perfectly with Pro-Line’s 1966 Chevrolet C-10 body and other Classic Truck Cabs! The dash allows you to add your own scale steering wheel and the interior includes many carefully sculpted details common to Classic Trucks. Decals are included. Complete your Classic Truck build with Pro-Line’s new Classic Interior! **NOTE: Steering Wheel NOT INCLUDED. ** Features: Old-School Bench Style Seat Interior Perfect Fit for Pro-Line’s 1966 Chevy C-10 body Comes Clear So You Can Custom Paint to Match Your Rig Includes Scale Decals Specifications: Length: 8.5" (216mm) Width: 7.75" (197mm) Height: 2.0" (51mm) Car Type: Crawler Scale: 1/10 Painted: No

482,-

** Ikke på lager

Hovedbilde Tamiya 86058 PS-58 Pearl Clear 100ml Spray Can

Tamiya 86058 PS-58 Pearl Clear 100ml Spray Can

This is the PS-58 Pearl Clear Spray from Tamiya. FEATURES: Extremely useful for painting large surfaces The color of the lid represents the color of paint For use on polycarbonate surfaces INCLUDES: One 3.4oz (100ml) Spray Can of Pearl Clear Tamiya Color REQUIRES: Removing protective film from body before spraying COMMENTS: Highly Flammable

129,-

På lager 7

Hovedbilde Tamiya 86005 PS-5 Polycarbonate Spray Black 3 oz

Tamiya 86005 PS-5 Polycarbonate Spray Black 3 oz

This is Tamiya Color Spray Lacquer for Polycarbonate (PS-5 Black). For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. An appropriate amount of paint for finishing one R/C model. This paint is impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS: Net Volume: 100ml COMMENTS: Never use this paint on plastic models. Highly flammable.

109,-

119,-

På lager 4

-8%

Hovedbilde Flysky FS GT-2E 2 channel radio set

Flysky FS GT-2E 2 channel radio set

The Flysky GT2E is a affordable, 2CH 2.4G radio system, with djustable steering dual-rate and servo reversing, making it a very simple setup for your car or boat. The automatic frequency hopping digital system provides a strong, reliable 2.4ghz signal, so rest assured you'll always be in control. Included in the package is a 3-channel mini receiver that will fit in most vehicles. The ergonomic feel of the trasnsmitter will feel good in your hands even after long track sessions. Features: Reliable, interference free 2.4GHz AFHDS signal operation. 2CH operation. Use only 4 * AA batteries for transmitter. Adjustable steering dual-rate. Simple binding procedure. Transmitter Specfications: RF Power: 20dBm (100mW) max Modulation: GFSK System Type: AFHDS 2A Sensitivity: 1024 Low Voltage Warning: Yes DSC Port: 3.5mm Charge Port: Yes (3.5IN) Power: 4 * AA 6VDC(not included) Weight: 243g Receiver Specifications: RF Receiver Sensitivity: -105dBm Modulation: GFSK System Type: AFHDS 2A Sensitivity: 1024 Power Port: Yes (VCC) Power: 4.5~6.5 VDC Weight: 6g Dimensions: 37 * 22 * 12mm Package information: Package size: 23.5 * 19.3 * 10.5cm / 9.3 * 7.6 * 4.1in Package weight: 496g / 1.1lb Package list: 1 * FS-GT2E transmitter 1 * FS-A3 3CH Receiver 1 * Antenna tube 1 * Bind plug

549,-

599,-

På lager 22

-8%