Hopp til innhold
Hjem / Verktøy/Lakk/Lim / Lim & Teip / Lim-produkter / Zap-lim / Z-POXY 5-MIN 4OZ (6) PT37

Z-POXY 5-MIN 4OZ (6) PT37

Art.nr: PT-37

249,-

Zap

Zap
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Product Details:

  • Clear, equal mix
  • Cures in 5 minutes
  • Fuel-proof, vibration resistant formula
  • Flexible and durable
  • Sandable
  • Excellent for furniture
  • Works best on: Metal, Wood, Rubber, Aluminium, Ceramic, Furniture

Produsent

Zap

Zap

Kunder kjøpte også

Hovedbilde Vapex Li-Po Battery 3S 11,1V 1000mAh 25C T-Connector Hovedbilde Vapex Li-Po Battery 3S 11,1V 1000mAh 25C T-Connector
Vapex Li-Po Battery 3S 11,1V 1000mAh 25C T-Connector
  LiPo Power Battery with T-Connector Battery: 3S 11.1V 1000mAh LiPo 25C Charge: Max 3C/3A (fast) Connector: T Wires: 13AWG Balance Connector: XH Length: 69 mm Width: 34.5 mm Height: 18 mm Weight: 85 g

239,-

249,-

KJØP
-4%
Hovedbilde Zap PT-41 Z-Poxy Finishing Resin 118ml
Zap PT-41 Z-Poxy Finishing Resin 118ml
This is 4oz (118ml) Z-Poxy Finishing Resin from Pacer. FEATURES Formulated to bond fiberglass to wood and foam Odorless and non-brittle Sand easily to a smooth finish Total working time of this resin is 20-30 minutes, and it fullycures in 3 hours completely clear INCLUDES One each 2oz (59ml) bottle of Hardener and Resin COMMENTSThis product contains epoxy resin and polymercaptan hardener. Incase of skin contact, wash thoroughly with soap and water. In caseof contact with eyes, flush with water for 15 minutes. Call aphysician. If swallowed, seek medaical advice immediately. Use inwell ventilated area. Keep out of reach of children.

249,-

KJØP
Hovedbilde Zap PT-03 Adhesives Zap-A-Gap CA (Medium)
Zap PT-03 Adhesives Zap-A-Gap CA (Medium)
This is a 1/2oz Bottle of Zap-A-Gap CA+ Glue from Pacer. Not safe for foam. For foam applications use epoxy or foam-safe CA. FEATURES Superior gap filling formula. Medium viscosity. Allows approximately 7-10 seconds for part positioning. Average of 20 seconds curing. Works on oily surfaces also. Use Zip Kicker to accelerate cure time. INCLUDES One 1/2oz Bottle of Zap-A-Gap CA+ Glue. SPECIFICATIONS 1/2oz (14.2g)

89,-

KJØP
Hovedbilde Ghost Glider - Orange RTF Hovedbilde Ghost Glider - Orange RTF
Ghost Glider - Orange RTF
Inkludert batteri og lader Kan flys innendørs Lettflydd Liten og flott RC-modell. Hele flyet er så kompakt at det er godt egnet for innendørsflyging om du har en stor stue, kontorlokale e.l. Også en fin hageracer. En rimelig, enkel og morsom start på modellflykarrieren for jr, eller for din daglige avkobling på arbeidsplassen! Med kun 22cm vingespenn kan du fly på steder du ikke trodde var egnet for modellfly. Flyet behøver kun ca. 5 meter or å snu. Det er såpass lite og lett at det gjør lite skade på seg selv og omgivelsene ved sammenstøt, så her kan du utfordre deg selv. Fly utfordrende baner og se hva du kan få til!   Innhold Med i pakken følger flyet, ferdig montert og flyklart ut av esken. Flyets integrerte baatteri lades opp med medfølgende USB-lader. Det følger også med radiosender, denne drives av 3x AA btterier(ikke inkludert), og en bruksanvisning. Spesifikasjoner Vingespenn 22 cm Lengde 22.5 cm Høyde 7 cm Vekt 20 gram Flytid ca. 10 minutter Ladetid 25 minutter Frekvens 2.4Ghz Rekkevidde 20-50 meter Materiale MPP

399,-

KJØP
Hovedbilde Dynomax 9234 Wire Red & Black 16AWG D1.6/3mm x 1m
Dynomax 9234 Wire Red & Black 16AWG D1.6/3mm x 1m
D-MAX Wire Set Red & Black - 16AWG 1+1m This is a high quality wire with a high amount of copper strands making it very suitable for RC models and other hobby projects. The wire is covered with a silicone based insulation material and together with the high strand count it’s also very flexible.   Short and Thick is Good In electric high powered models we are recommending you to use short and as thick wires as possible (within reason) together with a matching diameter/area connector system for optimum performance. Specifications: Length: 1+1m AWG Wire: 16 Area Wire: 1.5mm2 Diameter Wire: 1.6mm Diameter Insulation: 3mm Wire: 252 Strands of Copper @ 0.08 mm Insulation: Silicone Based

39,-

KJØP
Hovedbilde ZAP-Gel 3gram CA Fly Fishing
ZAP-Gel 3gram CA Fly Fishing
Thickest ZAP of all - great for filling gaps. The tube comes with a long tapered tip allowing precise application. The role playing gaming industry uses it for gluing pewter and plastic figures. Fly tiers and custom lure manufactures like it because it stays where they want it. Jewelry makers like the high strength and the ability to apply just the right amount. Model builders also like the high strength features and use it for servo mounts, laminating, gluing plywood, anywhere a fast curing high strength joint is needed.   Super thick formula Jelly like concentrated CA glue Will not run or flow Can be applied to Vertical or overhead surfaces Use CA kicker to accelerate cure time Fly Fishing - Great For: Fly Tying Gluing Hooks Into Bodies Extra Thick Formula Longer Positioning Time Works best on: Aluminum Ceramic China Metal Most Plastics Pewter Rubber Wood   Tube size: 0.1 oz / 3 g

35,-

KJØP
Hovedbilde DynoMAX B9235 Wire Red & Black 14AWG D2/3.6mm x 1m
DynoMAX B9235 Wire Red & Black 14AWG D2/3.6mm x 1m
D-MAX Wire Set Red & Black - 14AWG 1+1m This is a high quality wire with a high amount of copper strands making it very suitable for RC models and other hobby projects. The wire is covered with a silicone based insulation material and together with the high strand count it’s also very flexible.   Short and Thick is Good In electric high powered models we are recommending you to use short and as thick wires as possible (within reason) together with a matching diameter/area connector system for optimum performance. Specifications: Length: 1+1m AWG Wire: 14 Area Wire: 2.5mm2 Diameter Wire: 2mm Diameter Insulation: 3.6mm Wire: 400 Strands of Copper @ 0.08 mm Insulation: Silicone Based

69,-

KJØP
Hovedbilde Dynomax B9333 Connector XT30 2mm pair
Dynomax B9333 Connector XT30 2mm pair
Connector XT30 2mm pair 1 male & 1 female

35,-

KJØP
Hovedbilde Traxxas 2970 EZ-Peak Plus 4A NiMH/LiPo AC Fast Charger ... Hovedbilde Traxxas 2970 EZ-Peak Plus 4A NiMH/LiPo AC Fast Charger ...
Traxxas 2970 EZ-Peak Plus 4A NiMH/LiPo AC Fast Charger ...
EZ-Peak® Plus 4-amp NiMH/LiPo Fast Charger with iD® Auto Battery Identification   One connection does it all! The Traxxas iD® battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak® Plus recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus (#2970) does all the work for you. The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards. At the press of a button, the EZ-Peak Plus' Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. 4-amp fast charging and advanced high-resolution peak detection deliver a perfect charge every time. The EZ-Peak Plus is backed by the Traxxas Lifetime Electronics Warranty for years of reliable service. 1, 2, 3... Easy Steps! ­ ­ QUICK FEATURES ON EZ-PEAK PLUS (#2970) CHARGER ­ Recognizes Traxxas iD® batteries to automatically program and optimize charger settings Charge progress indicator Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface Built-in cooling fan Advanced Mode for full manual control of charger settings Legacy support for all Traxxas High-Current Connectors Built-in balance ports for conventional LiPo batteries Charges 5-8-cell NiMH batteries Charges 2s and 3s LiPo batteries ­ ­     EZ-PEAK PLUS (#2970) SPECIFICATIONS AC Input: ­ 100–240 Volts Charge Current Range: ­ 1.0-4.0A (40W Max.) Discharge Current Range: ­ 500mAh Current Drain For Balance Ports: ­ 500mAh NiMH Battery Cell Count: ­ 5–8 Cells LiPo Cell Count: ­ 2–3 Cells Net Weight: ­ 365g Dimensions: ­ 146 x 123 x 53mm     MODEL 2970: EZ-Peak® Plus 4-amp NiMH/LiPo Fast Charger with iD® Auto Battery Identification.

699,-

769,-

KJØP
-9%
Hovedbilde Zap Adhesives Red Thread Locker .20 oz
Zap Adhesives Red Thread Locker .20 oz
This is the Pacer Red Z-71 Thread Locker. FEATURES: High-strength, premium grade red liquid locks and seals metal nuts,              bolts, and studs or metal fasteners up to 1" (26mm) in diameter           Holds in temperature ranges from -65°F - 300°F (-54°C - 149°C)           Resistant to gasoline and oil INCLUDES: One bottle .20oz (6ml) Pacer Red Z-71 Thread Locker REQUIRES: Applying bead around part to be bonded and assemble with a twisting             motion to spread adhesive. Allow to cure 24 hours for maximum             strength COMMENTS: Avoid contact with eyes and skin.  In case of eye contact, rinse             immediately with plenty of water and seek medical advice.  Wash             skin thoroughly with soap and water after use. Seek medical advice             if irritation persists.

59,-

KJØP
Hovedbilde Zap PT09 Adhesives Zap CA 1/2 oz
Zap PT09 Adhesives Zap CA 1/2 oz
The ZAP CA Glues are clog-resistant with and have an extra, long tip to reach into tight spots. Easy-to-squeeze bottles aid in applying just the right amount of glue for easier sanding and less mess. Not safe for foam. For foam applications use epoxy or foam-safe CA. FEATURES Wicks quickly for instant bonds on tight-fitting parts. INCLUDES One ZAP CA Glue 1/2oz Thin COMMENTS Thin is instant setting: CA Thick is gap filling: CA+

79,-

KJØP
Hovedbilde Zap PT-02 Adhesives Zap-A-Gap CA+ 1 oz
Zap PT-02 Adhesives Zap-A-Gap CA+ 1 oz
   This is a 1oz Bottle of Zap-A-Gap CA+ Glue from Pacer.       Not safe for foam. For foam applications use epoxy or foam-safe CA. FEATURES: Superior gap filling formula.           Medium viscosity.           Allows approximately 7-10 seconds for part positioning.           Average of 20 seconds curing.           Works on oily surfaces also.           Use Zip Kicker to accelerate cure time. INCLUDES: One 1oz Bottle of Zap-A-Gap CA+ Glue. SPECS:    1oz (28.4g)

129,-

139,-

KJØP
-7%
Hovedbilde Tamiya 81041 Paint Mixing Jar
Tamiya 81041 Paint Mixing Jar
Glass-krukke for å blande maling med 23cc kapasitet. Mindre størrelse på glasset er perfekt for å forberede små mengder maling og blandinger. Lokket er med pakning som er tett, slik at lagring av akryl, emalje eller lakk maling er problemfritt. Glasset har graderinger i 5 ml intervaller trykt på siden.

35,-

KJØP
Hovedbilde HPI Racing 101015 Rear Wheel Hub Left/Right
HPI Racing 101015 Rear Wheel Hub Left/Right
This is the Rear Wheel Hub (L, R) For the HPI Racing Nitro Trophy 3.5 Buggy FEATURES: Black plastic construction INCLUDES: One left rear hub One right rear hub Four assorted spacers       (11)

89,-

Ikke på lager
Hovedbilde Senator 422579 pensel 3
Senator 422579 pensel 3
Senator pensel 3

19,-

KJØP
Hovedbilde Tamiya 86007 PS-7 Polycarbonate Spray Orange 3 oz
Tamiya 86007 PS-7 Polycarbonate Spray Orange 3 oz
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-7 Orange).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
Hovedbilde APC Propeller 8x3.8 Slowflyer
APC Propeller 8x3.8 Slowflyer
Propeller 8x3.8 Slowflyer

45,-

KJØP
Hovedbilde Traxxas 5001 Top Fueler Fuel Bottle 500cc
Traxxas 5001 Top Fueler Fuel Bottle 500cc
This is the Traxxas Top Fueler 500cc Glow Fuel Bottle.  Can be used with any glow fuel.     FEATURES Clear plastic 500cc capacity bottle  Blue anodized aluminum spout   INCLUDES One Fuel Bottle  One fuel bottle spout with black plastic cap   REQUIREMENTS Filling with glow fuel.   SPECIFICATIONS  Capacity: 500 cubic centimeters (500ml)   COMMENTS The bottle is labeled Traxxas Top Fueler in red print.

99,-

KJØP
Hovedbilde Zap PT35 Z-Poxy 15 Minute 4oz Hovedbilde Zap PT35 Z-Poxy 15 Minute 4oz
Zap PT35 Z-Poxy 15 Minute 4oz
This is the 4oz Zap Z-Poxy 15 Minute Epoxy Resin from Pacer.     FEATURES Cures completely clear  Easy to sand and has excellent gap filling characteristics  Z-Poxy is specially formulated to bond to fiberglass, wood,  metals, and plastics  Resistant to shock and solvents  Non-brittle, non-shrinking  Produces a tough permanent bond in just 30 minutes   INCLUDES 2oz of 15 Minute Z-Poxy Resin  2oz of 15 Minute Z-Poxy Hardener   COMMENTS This product contains epoxy resin and polymercaptan hardener. In case  of skin contact, wash thoroughly with soap and water. In case of  contact with eyes, flush with water for 15 minutes. Call a  physician. If swallowed, seek medical advice immediately and show  container label. Use in well ventilated area. Keep out of the  reach of children.

239,-

KJØP
Hovedbilde Zap PT-20 Adhesives Slo Zap CA- 1 oz
Zap PT-20 Adhesives Slo Zap CA- 1 oz
 This is a 1oz Bottle of Slo-Zap CA Glue from Pacer.      Not safe for foam. For foam applications use epoxy or foam-safe CA. FEATURES: Very high viscosity formula.           Super thick and super strong.           Allows approximately 30-40 seconds for part positioning.           Cures in 90 seconds.           Ideal for fillet forming, gap filling, wing sheeting, laminating,             etc.           Use Zip Kicker to accelerate cure time. INCLUDES: One 1oz Bottle of Slo-Zap CA Glue. SPECS:    1oz (28.4g)

139,-

KJØP
Hovedbilde SkyRC D100-V2 Dual Charger 2x100W 240VAC/12VDC Hovedbilde SkyRC D100-V2 Dual Charger 2x100W 240VAC/12VDC
SkyRC D100-V2 Dual Charger 2x100W 240VAC/12VDC
  SKYRC D100-V2 - AC/DC Dual Balance Charger / Discharger / Power Supply SKYRC D100v2 is a twin-channel charger with two independent circuits which can charge batteries of varying chemistries (LiPo/LiFe/Lilon/LiHV/NiMH/NiCd/Pb) simultaneously. Capable of operating as a power supply with the maximum output of 100W helps the hobbyists to power other DC equipments. With its unprecedented function of voice guide, even a freshman can operate this charger easily. Additional feature including our "SCAN TO GO" and smart phone control via Bluetooth. Twin-channel Charger SKYRC D100v2 allows you to plug 2 batteries into one charger simultaneously, and it will intelligently and automatically charge 2 battries at once to their maximum capacity. To top of it, the batteries being charged do not even need to have the same configuration. You can connect different chemistry (LiPo/LiFe/Lilon/LiHV/NiMH/NiCd/Pb)batteries into any of the charging ports. Dual Input and Power Distribution The input of the charger is AC 100-240V and DC 11-18V. In DC mode, the power of each channel is 100W. Total power is 200W. In AC mode, it supports power distribution, between Channel A, Channel B & Power Supply. For example, if both channel A and channel B are set to 40W, then, the DC power is 20W. The total power is 100W. (40W+40W+20W=100W) Optimized Operating Software SKYRC D100v2 features the so-called AUTO function that sets the feeding current during the process of charging or discharging. Especially for lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users! DC Power Output Supported With the unique feature of DC power source, the user does not have to carry additional big and heavy power supply to the racing track or flying filed. Voice Guide Purposes to make the charger more intuitive and user friendly. Special Features Battery Memory (Data Store/Load) The charger can store up to 10 different charge/discharge profiles for each channel. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting. Terminal Voltage Control (TVC) The charger allows user to change the end voltage. (for expert user only) SkyCharger APP - Smart Phone Control via Bluetooth (both iOS and Android) The Bluetooth 4.0 connectivity allows the user to remote control and monitor the D100 v2 comfortably through an app on a portable device such as smartphone, iPad, or iPhone. The iOS app can be downloaded from iTunes Store, the Android app from Google Play Store. Operation of the app is self-explanatory and the same on iOS and on Android. Explicit pairing is not required; after download and installation just activate Bluetooth on your mobile device and launch the app. D100 v2 and your device will establish Bluetooth connection automatically. SCAN TO GO A very unique feature of D100v2 is SCAN TO GO (automatically charging system). As the range of battery types and capacity becomes more and more, each battery requires its own dedicated charging process. It is easy to set up the charger incorrectly for a specific type of battery, resulting damage the battery or even cause accident. The revolutionary SCAN TO GO provides a solution to this problem by allowing the user to assign a QR Code which contains all the relevant data for the battery for charging or discharging. The user can create a unique QR Code by using “SkyCharger” apps. Print it and paste it on the battery. Using your smart phone and launch “SkyCharger” app. Since all the essential information is stored in the QR Code. All you need to do is press the Scan button, and the charge or discharge process will start automatically. Charge Master - PC Control Software The free “Charge Master” software gives you unparalleled ability to operate the charger through the computer. You can monitor pack voltage, cell voltage and other data during the charging, view charge data in real-time graphs. And you can initiate, control the charger from “Charge Master”. The user can monitor pack voltage, cell voltage and other data during the charging, view charge data in realtime graphs, and can also control charging and update firmware from "Charge Master". Balancing Individual Cells Battery During Discharging During the process of discharging, SKYRC D100v2 can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal. Fast Charge and Storage Mode of Lithium Battery Function of the two modes differs from each other. “FAST CHG” minimizes battery charge time, while “STORAGE” has the capacity to control the final battery voltage, which is necessary and helpful for a rarely used battery. Re-Peak Mode of NiMH/NiCd Battery In re-peak charge mode, the charger can peak charge the battery once, twice or three times in a row automatically. This is good for making the battery fully charged. Delta-peak Sensitivity for NiMH/NiCd Delta-peak sensitivity for NiMH/NiCd battery: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically. Cyclic Charging/Discharging 1 to 5 cyclic and continuous process of charge > discharge or discharge > charge is operable for battery refreshing and balancing to stimulate the battery's activity. Automatic Charging Current Limit You can set up the upper limit of the charging current when charging your NiMH or NiCd battery, it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode. Battery Voltage Meter The user can check battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage. Battery Internal Resistance Meter The user can check battery's total internal resistance and each cell's internal resistance. Capacity Limit The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value. Temperature Threshold* The battery's internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated. This function is only available by connecting optional temperature probe, which is not included * in the package. Processing Time Limit: You can also limit the maximum process time to avoid any possible defect. USB Power 5V/2.1A You can charge your phone and tablet using the built-in USB power output port. Specs: DC Input Voltage: 11-18V AC Input Voltage: 100-240V Display Type: 128x64 LCD Display Backlight: Cool White Case Material: Plastic Controls: Five Buttons Case Size: 153 x 140 x 67 mm Weight: 668 g DC Power Supply Output: 13.8V / Max. 100W PC Communications: USB Port for PC Control & Firmware Upgrade External Port: 2-6S Balance Socket-XH, Temperature Probe Socket, Battery Socket, AC/DC Input, DC Output, Micro USB Port for PC, 5V-2.1A USB Output. Delta Peak Detection for NiMH/NiCd: 3-15mV/cell / Default: 4mV/cell Charge Cut-off Temperature: 20ºC-80ºC (adjustable) Charge Voltage: NiMH/NiCd: Delta peak detection LiPo: 4.18-4.25V/cell LiIon: 4.08-4.2V/cell LiFe: 3.58-3.7V/cell LiHV: 4.25-4.35V/cell Balance Current: 300mA/cell Reading Voltage Range: 0.1-26.1V Battery Types/Cells: LiPo/LiIon/LiFe/LiHV: 1-6cells NiMH/NiCd: 1-15cells Pb: 2-20V Battery Capacity Range: NiMH/NiCd: 100-50000 mAh LiPo/LiIon/LiFe/LiHV: 100-50000 mAh Pb: 100-50000 mAh Charge Current: 2x 0.1A-10.0A Safety Timer: 1-720 minutes / OFF Charge Wattage: AC 100W (Support Power Distribution) DC 2x100W Discharge Current: 2x 0.1A-2.0A Discharge Cut-off Voltage: NiMH/NiCd: 0.1-1.1V/cell LiPo: 3.0-3.3V/cell LiIon: 2.9-3.2V/cell LiFe: 2.6-2.9V/cell LiHV: 3.1-3.4V/cell Pb: 1.8-2.0V/cell Discharge Wattage: 2x 10W Balance Cells: 2-6 cells Memory: 10x2 Different Charge/Discharge Profiles Charge Method: CC/CV for Lithium Types and Lead (Pb) Batteries & Delta-peak Sensitivity for NiMH/NiCd. Included: SKYRC D100v2 Charger 2x XH Adaptor 2x Charging Cable 2x Banana connectors with XT60 connector Charging Cable Power Cord     Weight: 668 g Input Voltage: 11-18VDC / 100-240VAC V Dimensions: 153x140x67mm mm Charge Current: 0,1-10A x 2 Charges (Li-Fe): 1-6 Cells Charges (Li-Ion): 1-6 Cells Charges (Li-Po): 1-6 Cells Charges (NiMH): 1-15 Cells Charges (Pb): 2-20V Charging (Battery type): NiMH, Multi Charger, LiHV, Li-Po, Li-Ion, Li-Fe, Pb Discharge Current: 0,1-5,0A x 2 Output: 200W (2x100) Supplied Charging Cables: 2x XH Adapters, 2x Charging Cables, 2x XT60 Special Functions: Built-in Bluetooth

1.495,-

KJØP
Hovedbilde Traxxas 6739 Shock tower, front Rustler 4x4
Traxxas 6739 Shock tower, front Rustler 4x4
Shock tower, front Rustler 4x4

69,-

KJØP
Hovedbilde Traxxas 3655R Suspension arms, front/rear
Traxxas 3655R Suspension arms, front/rear
Utgått! Erstattet med TRX 3655-BLK Suspension arms, front/rear (left & right) (2) (heavy duty, cold weather material)

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png