Hopp til innhold

Traxxas 8629 Bulkhead Rear Upper & Lower

Art.nr: TRX 8629

179,-

Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Bulkhead, rear (upper and lower)/ 4x12mm BCS (6) (requires #8622 chassis)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Wing Mount Sledge

79,-

KJØP
RPM Front Left A-arms for E-Revo 2.0 - Black Replaces stock Traxxas #8632 Quick Notes: 5g (per pair) lighter than stock Stronger than stock Replaces stock Traxxas #8632 While Traxxas may have beefed up the E-Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams per side less than stock, for a total weight loss of 10 grams! RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks! RPM front A-arms for the Traxxas E-Revo 2.0 are molded from our indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage. Tech Notes: RPM #81512 & #81515 replace stock Traxxas #8632. RPM E-Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.

199,-

KJØP
RPM Front Right A-arms for E-Revo 2.0 - Blue Replaces stock Traxxas #8631 Quick Notes: 5g (per pair) lighter than stock Stronger than stock Replaces stock Traxxas #8631 While Traxxas may have beefed up the E-Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams per side less than stock, for a total weight loss of 10 grams! RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks! RPM front A-arms for the Traxxas E-Revo 2.0 are molded from our indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage. Tech Notes: RPM #81462 & #81465 replace stock Traxxas #8631. RPM E-Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.

239,-

259,-

KJØP
-8%
Body clips, heavy duty (black) (12)

39,-

49,-

KJØP
-20%
  Wing Mount Low Profile

119,-

KJØP
Traxxas 9537 Steering Blocks (Pair) Sledge Steering blocks, left & right/ M4x0.7 NL (4)

69,-

KJØP
Suspension arms, rear (right), heavy duty, adjustable wheelbase (upper (1)/ lower (1))

145,-

KJØP
Screws, 4x18mm button-head machine (hex drive) (6)

39,-

KJØP
These are the 17mm Splined Wheel Nuts for the Traxxas X-Maxx Monster Truck. FEATURES Aluminum construction, anodized red in color Threads onto stub axles to hold wheels in place INCLUDES Four 17mm Splined Wheel Nuts

149,-

159,-

KJØP
-6%
Wheel hubs, splined, 17mm (red-anodized) (4)/ 4x5 GS (4), 3x14mm pin (4) Set of four 17 mm red-anodized aluminum wheel hubs combine high-profile looks with superior strength. The special splined design locks into Traxxas splined wheels for precise alignment and unsurpassed grip. Includes 4x5 mm grub screws (4), and 3x14 mm pins (4). PLEASE NOTE: Maxx models require 8950X (standard width) or 8996X (WideMaxx®) Steel constant-velocity

239,-

256,-

KJØP
-7%
Wheels, 3.8" (black) (2) (17mm splined)

129,-

139,-

KJØP
-7%
Tires, Talon EXT 3.8" (2)/ foam inserts (2)

369,-

389,-

KJØP
-5%
Big bore shock technology from the on-road shocks transplanted onto off-road shocks! Gain more consistent handling through the enlarged shock bodies which houses more shock oil! Included is already a spring attached, so all you have to do is add oil and mount it to your rig! No more tedious assembly required!   Feature: For: Traxxas 1/10 Slash ,Stampede, Bandit, Arrma  Material: Aluminum Color: Red   Include: TR-XB Big Bore Shocks (2 pcs)

299,-

329,-

KJØP
-9%
These are the 58mm Turnbuckle Camber Links               for the Traxxas Nitro Jato Stadium Truck and Slash 4x4. FEATURES: Metal and Nylon Construction           Silver and Black in Color           Assembled w/Rod Ends           Can be Used on Front or Rear INCLUDES: Two 58mm Threaded Rods           Four 3mm Ball Ends           Four 3mm Hollow Balls REQUIRES: Assembly onto Vehicle

95,-

KJØP
This is a pair of Traxxas B.F. Goodrich Mud Terrain T/A KM2 Tires                          Pre-Mounted on SCT Wheels. FEATURES: Fits two wheel and four wheel drive Traxxas Slash           Off-road rubber treaded tires           Dual profile (inner diameters of 2.2" (56mm) and 3.0" (76mm)           SCT split-spoke chrome with satin black bead-loc wheels INCLUDES: Two Mud Terrain T/A KM2 Tires and wheels SPECS:    Outer Diameter: 4.3" (109mm)           Width: 1.7" (43mm)           Hex: 12mm

349,-

369,-

KJØP
-5%
Traxxas 5475 Multi Tool 4-Way

35,-

KJØP
This is the Upper & Lower Steering Arm (Incorporates the servo saver)                        for the REVO from Traxxas. FEATURES: Steel & black nylon construction INCLUDES: Steering arm w/incorporated servo saver, servo saver spring, &             pin. REQUIRES: TRX 2587   2587 Cap Head Screw 3X10mm                   TRX 2582   2582 Button Head Screw 3X30mm                   TRX 5116   5116 Ball Bearings

89,-

KJØP
Front Bumper Mount for the Traxxas Revo Quick Notes: – replaces Traxxas stock #5335 – Revo Front Bumper also available Description RPM customers already know our bumpers are some of the toughest in the R/C industry, but a tough bumper needs proper support. That support has arrived in the form of RPM bumper mounts for the Traxxas Revo. These new bumper mounts are designed to absorb serious impacts while transferring minimal impact energy into the more fragile components of the truck. RPM engineers reviewed the stock bumper mounts and found that there were several areas that could be improved. Both the front and rear RPM bumper mounts were widened (the front more so than the rear) to allow the bumper mount material more flexing room. We also curved the center connecting rib to allow the bulkhead mounting points the ability to rotate at the mounting screws, allowing more impact absorption and less energy transference. Our last major design improvement is the one everyone is most familiar with – RPM custom-blended nylon! Our material is the toughest stuff out there with just the perfect blend of rigidity, flexibility, durability and memory. When quality counts and protection is needed most, RPM is the company to turn to for the ultimate in American designed and American made aftermarket R/C products! Tech Notes: RPM Front Bumper Mounts replace Traxxas stock #5335 (RPM bumpers sold separately).    

85,-

KJØP
NB! Denne erstatter TRX 5480 This is the 17mm Splined Wheel Wrench from Traxxas. FEATURES Nylon construction, black in color  Compatible with the 17mm splined nuts used on many Traxxas vehicles INCLUDES 17mm splined wheel wrench

39,-

KJØP
Output gears, differential, hardened steel (2)

305,-

KJØP
Gear set, differential (spider gears (4), spider gear shaft (2)) 

119,-

KJØP
  This is a Green Tension Shock Spring Set for the Revo GTR Shocks.              These springs are installed on the shock bodies. FEATURES: Red in color           Orange band on spring indicates 3.2 tension rating INCLUDES: Two 3.2 rear shock springs REQUIRES: Nothing.  These are direct fit springs. SPECS:    Length: 1-3/4" (44mm)           Outer diameter: 0.83" (21mm)

75,-

KJØP
KJØP
These are the 5107A 17 x 26 x 5mm Ball Bearings  for the Traxxas X-Maxx Monster Truck     FEATURES Steel construction with black rubber seals  Used in the front and rear differentials of the X-Maxx   INCLUDES Two 17 x 26 x 5mm Black Rubber Sealed Ball Bearings   SPECIFICATIONS  Inner Diameter: 17mm  Outer Diameter: 26mm  Thickness: 5mm

109,-

119,-

KJØP
-8%
Available in large 50ml and extra large 100ml bottles with convenient flip cap.  HUDY Ultimate Silicone Oils are manufactured in Europe by a specialized silicone oil premium manufacturer and were created exclusively for HUDY. Each batch of ultimate oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven cSt rating, the new line of oils will be easy to identify, adjust, and feel. HUDY oils cover the complete range from Ultra Thin (100cSt)... Thin (1000 cSt)... Medium (5000cSt)... Thick (10.000cST)... up to Extra Thick (1.000.000cSt), with numerous stages in between. Thinner oils are suitable for shocks (up to Medium), and thicker oils are suitable for differentials. With the available range, you will be able to find the correct viscosity you need for your application. Each category of oils is individually color-coded to allow you to instantly recognize the type of viscosity.   

169,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png