Hopp til innhold

Traxxas 9518 Wing Mount Sledge

Art.nr: TRX 9518

79,-

Traxxas

Traxxas

På lager: 3

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Wing Mount Sledge

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 95076-4-BLUE
Copied
Traxxas Sledge™ 1/8 Truck 6s - Blue Redefining 1/8 Scale Off-Road! Engineered. Tested. Built to a higher standard. The all-new Sledge is made to exceed your expectations for quality, toughness, and fun. The rock-solid chassis, massive steel drivetrain, ferocious 6s power, and race-inspired handling leave everything else in the dust. Engineered for 6s Power Sledge is the only truck in this class with a properly sized, 6s-capable driveline. Bigger gears. More steel. Basically bombproof. Sledge smashes the status quo to be the new standard for extreme 6s durability. Superior Chassis Strength Sledge is engineered to have the strongest chassis in the class. The triangulated chassis structure integrates a deep-formed aluminum plate with a multi-point composite truss system and the patent-pending full-length T-Bar™. Built on a solid foundation, Sledge is strongest where it matters most. New Clipless Body Remove and replace the body in just seconds with exclusive patent-pending clipless body solutions engineered by Traxxas. Sledge’s clipless body goes on smoothly with a satisfying snap. The body is designed to come off when YOU release it. Monster Servo Sledge is equipped with a high-performance metal gear servo that packs massive torque inside a heat dissipating aluminum center case. Powerful and reliable steering authority is assured with no upgrade required. VXL-6s Power System The Velineon VXL-6s features new hardware and new tuning specifically for the 2000kV motor. Together they deliver substantially more power under the curve for increased mid-range punch and hard-charging acceleration you can see and feel. Sledgehammer Tires Premium Sledgehammer® tires are standard equipment. No tire upgrade required. Durable foam inserts are designed to not bunch up or break down. Patent-pending Traxxas innovation improves the tire bonding process to reduce the chance of a blown-out bead while exploring the upper range of Sledge’s capability. What’s In The Box: Sledge, Ready-To-Race® monster truck with Traxxas 2000kV brushless motor VXL-6s waterproof electronic speed control with integrated telemetry Quick Start Guide TQi™ 2.4GHz radio system High quality maintenance tools Jumper plug (for 4s battery use) What You’ll Need: LiPo Batteries: Traxxas recommends dual 5000mAh 3-cell 11.1V Power Cell LiPo batteries for maximum performance. Dual 7600mAh 7.4V LiPo batteries or a single 6700mAh 14.8V LiPo battery will operate the vehicle with reduced performance. NiMH batteries are not supported. LiPo Balance Charger with iD™: Traxxas EZ-Peak® Live 4s-capable charger is recommended for easy and fast charging performance (model #2971). AA Alkaline Batteries: Four AA alkaline batteries for the transmitter. Specs: Length (including wing): 604mm Front Track: 459mm Rear Track: 459mm Ground Clearance: 50mm Weight (no battery): 5.77kg Height (overall): 214mm Wheelbase: 384mm Shock Length (front): 128mm Shock Length (rear): 144mm Tire Diameter: 170 x 84mm Wheel Diameter: 97mm (3.8") Speed Control: Velineon® VXL-6s (#3485) Motor (electric): Velineon® 2000kV Brushless Overall Drive Ratio: 17.2 (13/52 motor pinion and spur gear) Differential Type: Sealed, hardened steel bevel, limited slip Gear Pitch: Module 1.0 Chassis Structure/Material: 3.2mm aluminum plate Brake Type: Electronic Drive System: Shaft-driven 4WD Steering: Double-shear bellcrank w/metal servo arm Wheels & Tires: 3.8” wheels, pre-glued Sledgehammer® Tires & foam inserts Radio System: 2-Channel, TQi™ 2.4GHz Transmitter with TSM® receiver Servo: 2275 Waterproof, metal-gear (347oz-in torque) Top Speed: 112+ KPH with two 3S LiPo batteries and optional gearing (sold separately) Skill Level: 4 Battery Tray: Narrow configuration (L/W/H): 181 x 50 x 29/37/45mm* Wide configuration (L/W/H): 160 x 57 x 29/37/45mm* *Using included optional foam spacer Spec. Car Type: Truck, Truggy Delivered as: RTR (Ready-To-Run) Drive: 4WD Operating Mode: Electric Scale: 1/8 Suitable For: Experienced, Expert Surface: Grass, Gravel Length: 604 mm Ground Clearence: 50 mm Height: 214 mm Weight: 5770 g Width: 459 mm ESC: Traxxas Velineon VXL-6s Top Speed: 112km/h Transmitter: Traxxas TQi 2-Channel Motor Type: Brushless Motor/Engine: Traxxas Velineon 2000kV Battery: Not Included Charger: Not Included Water Proof: Yes

9.995,-

KONTAKT

Kunder kjøpte også

Traxxas 9511A  Body Sledge Green Complete w/ Supports & Mounts Body, Sledge™, green/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting) Car Type: Truck Scale: 1/8 Painted: Yes

799,-

899,-

KJØP
-11%
Traxxas 9517T Wing Orange Sledge Wing (orange)/ wing washer / 4x12mm FCS (2)

199,-

KJØP
This is the Rear Suspension Arm Guards for the Stampede and Slash 4x4 FEATURES: Black plastic construction INCLUDES: Rear suspension arm guards (2)           Guard spacers(2)           Hallow Balls (2)           3x16mm BCS (2) REQUIRES: Installation on vehicle

89,-

KJØP
These are the Front Suspension Arm Guards for the Traxxas Stampede 4x4 VXL. FEATURES: Composite plastic construction           Black in color INCLUDES: Two front suspension arm guards           Two guard spacers           Two hollow balls           Eight 3x16mm button head cap screws REQUIRES: Installation onto front suspension

89,-

KJØP
Disse lagerene er samme størrelse som Tamiya 850 This is a 2 pack of Traxxas 5X8mm Ball Bearings. FEATURES: Metal bearing construction           Blue rubber dirt shields INCLUDES: (2) 5X8mm ball bearings    Part #5114 SPECS:    Inside diameter:      3/16"    (5mm)           Outside diameter:     5/16"    (8mm)           Width:                3/32"  (2.5mm)

49,-

KJØP
Louise LT3202SX - MT-PIONEER 1/10 Soft (12, 14 & 17mm Hex)   Removable hex system: Featuring Louise latest technology, removable hex system. 4 different Hex sizes is included, 12mm (0 offset), 12mm (1/2"), 14mm (1/2"), 17mm (1/2"). Specs Scale: 1/10 Tire diameter: 119.5mm Tire width: 69.4mm Tire compound: Soft Hex: 12mm, 14mm, 17mm Offset: 0 tum , 1/2 tum Tire technology: Removable Hex system.   Fits: Traxxas STAMPEDE 2WD  Traxxas STAMPEDE 4x4 Traxxas RUSTLER 2WD Traxxas RUSTLER 4x4 Traxxas SKULLY 2WD Traxxas CRANIAC 2WD Arrma Vorteks Mega 2WD  Arrma Vorteks BLS 2WD  Arrma Granite Mega 2WD  Arrma Granite BLS 2WD  Team Durango DEST210 2WD  Kyosho Rage 2WD Kyosho Mad Bug 2WD  Also fits other 1/10 Scale Monster Trucks with 12 mm, 14 mm and 17 mm hex

439,-

469,-

KJØP
-6%
Wheelie Bar Assembled Red Sledge Wheelie bar, red (assembled)/ 3x20 CS (8) The Sledge® wheelie bar helps prevent backflips under full-throttle acceleration and flexes to absorb impacts on less-than-perfect landings. It also features a convenient handle to transport your Sledge to the next adventure. Includes mounting screws.

319,-

KJØP
Traxxas 9531R Suspension Arm Front Left Red Sledge Suspension arm, front (left), red

139,-

KJØP
Traxxas 9534R Suspension Arm Rear Left Red Sledge Suspension arm, rear (left), red

149,-

KJØP
Traxxas 9533R Suspension Arm Rear Right Red Sledge Suspension arm, rear (right), red

149,-

KJØP
Traxxas 9519R Mud Guards Rear Red (L+R) Sledge Mud guards, rear, Red (left and right)/ 3x15 CCS (2)/ 3x25 CCS (2)

75,-

KJØP
Traxxas 9510R Body Reinforcement & Roof Skidpads Red Sledge Body reinforcement set, red/ skid pads (roof) (fits #9511 body)

109,-

119,-

KJØP
-8%
Shock Caps Alu Black GTX (4) Shock caps, aluminum (black-anodized), GT-Maxx® shocks (4)/ spacers (4) (for Sledge™) Black-anodized aluminum shock caps add strength and style to Sledge GT-Maxx® shocks. Includes spacers.

589,-

629,-

KJØP
-6%
Traxxas 9557X Driveshaft, rear, steel constant-velocity (shaft only) (1) (for use only with #9654X rear steel CV driveshafts) Accessory part for these models: Sledge®

199,-

KJØP
  Description: This is Traxxas X-Maxx Velineon 1200XL 4-Pole Brushless Motor. 1200KV   Feature: For: Traxxas X-Maxx Material: Metal Color: Black Traxxas 6.5mm bullet connectors   Include: Traxxas X-Maxx Velineon 1200XL 4-Pole Brushless Motor (1 pc)

2.695,-

2.895,-

KJØP
-7%
Traxxas 9623P Skidplate, chassis, grey (fits Sledge®) Protect Sledge's aluminum chassis from scrapes and damage with this tough composite skid plate. Available in several bright colors, the heavy-duty skid plate aligns perfectly with the existing mounting holes for a perfect factory fit. Longer attachment screws come in the kit and must be used when mounting the skid plate to the chassis. Accessory part for these models: Sledge

199,-

KJØP
Traxxas 9556X Driveshaft, center, rear (steel constant-velocity) (shaft only) (1) (for use only with #9655X steel CV driveshafts) Accessory part for these models: Sledge®

199,-

KJØP
Traxxas 9554X Stub axles, hardened steel (2) (for use only with #9557 driveshaft) Accessory part for these models: Sledge®

249,-

KJØP
Traxxas 9586X Differential output cup, center (hardened steel, heavy duty) (2)/ 2.5x12mm pin (2) Give your Sledge® the ultimate driveline upgrade with these heavy-duty center differential output cups. Built for maximum strength and durability, these hardened steel output cups work with standard center driveshafts or the upgraded 9655X hardened steel center CV driveshafts. Includes 2.5x12 mm drive pins (2). Sold in pairs. Accessory part for these models: Sledge®

249,-

269,-

KJØP
-7%
Traxxas 9587X Drive cup, center, front or rear (steel constant-velocity) (1) (fits Sledge®) Accessory part for these models: Sledge®

199,-

219,-

KJØP
-9%
Output Cup Diff F/R HD Sledge Differential output cup, front or rear (hardened steel, heavy duty) (2)/ 2.5x12mm pin (2) Give your Sledge® the ultimate driveline upgrade with these hardened steel differential output cups. Built for maximum strength and durability, these heavy-duty output cups fit front or rear differentials and include 2.5x12 mm pins (2). Sold in pairs. Accessory part for these models: Sledge®

189,-

209,-

KJØP
-10%
Traxxas 9573 Tires & wheels, assembled, glued (3.8" black wheels, belted Sledgehammer® tires, foam inserts) (2) Belted Sledgehammer® tires deliver game-changing stability and control whether you’re slinging mud or setting speed records. The wide, open-block tread design won’t clog up with dirt or debris and the lightweight belting maintains the tire’s shape for a larger contact patch, more grip, and responsive handling at any speed. Sledgehammer tires come pre-mounted to 3.8″ black Sledge wheels with an ultra-tough glue bead for the most extreme high-speed off-road action. Fits 17 mm splined hex, front or rear.

929,-

999,-

KJØP
-7%
Traxxas 9680 O-rings (6) O-rings (6) Set of six O-rings for use with Sledge® rear driveshafts

29,-

39,-

KJØP
-26%
Traxxas 9656X Rebuild kit, steel constant-velocity driveshafts, center (front or rear) (includes pins for 2 driveshaft assemblies) (for #9655X steel CV driveshafts) Accessory part for these models: Sledge®

79,-

KJØP
  Wing Mount Low Profile

119,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png