Hopp til innhold

Traxxas 7460A Motor Mount Rustler 4x4/Slash Ultimate

Art.nr: TRX 7460A

69,-

Traxxas

Traxxas

På lager: 2

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Denne erstatter TRX 7460

Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

 This is the set of Traxxas Long GTR Shock Springs                       with 0.892 Blue Compression Rate. FEATURES: Steel construction, white in color           Dab of paint on end of spring indicates compression rate INCLUDES: Two Long 0.892 Blue Rate GTR Shock Springs SPECS:    Length: 1.8" (45mm)           Wire Diameter: 0.043" (1.1mm)

69,-

** Ikke på lager
KJØP
Traxxas 6786 - ­­4X4 Bearing Kit Restore your Traxxas model to peak performance with this bearing kit. The bearing kit swaps out the standard bearings with new factory-fresh replacements. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts. Not all bearings compatible with BL-2s models ­ 4X4 BEARING KIT FEATURES ­All-inclusive bearing kit Individual box compartments Handy label for identifying parts

369,-

399,-

På lager 2
KJØP
-8%
Green Motor Plate

85,-

På lager 1
KJØP
Denne erstatter TRX 6845  This is the replacement Steering Bellcrank Set for the Traxxas Slash 4X4. FEATURES: Composite nylon construction, black in color           Replaces a worn or damaged bellcrank set INCLUDES: One Left Bellcrank Lower           One Left Bellcrank Upper           One Right Bellcrank           One Draglink           One Spring Retainer           Two Servo Arms           Two Shoulder Screws           Two 3x15 Counter Sunk Machine Screws           Two Hallow Balls REQUIRES: Assembly and installation following the model manual and included              instruction sheet

149,-

169,-

På lager 7
KJØP
-12%
This is the Rear Differential Housing for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction Black in color INCLUDES: Two rear differential housing halves REQUIRES: Installation around diff components

49,-

59,-

På lager 2
KJØP
-17%
This is the optional Clear Gear Cover for use on the Traxxas Slash 4x4. FEATURES: Plastic construction           Clear in color INCLUDES: One Clear Gear Cover REQUIRES: Installation on the vehicle

55,-

På lager 2
KJØP
This is the Diff Carrier/Gasket Set for the Traxxas Revo. FEATURES: Plastic Diff Carrier           Blue Rubber Shaft Gaskets           Black Rubber Diff Carrier Gaskets           Gray Teflon Washer INCLUDES: One Diff Carrier           Two Blue Rubber Shaft Gaskets           One Black Rubber Diff Carrier Gaskets           One Gray Teflon Washer REQUIRES: Assembly to vehicle

59,-

69,-

På lager 3
KJØP
-14%
This is the Front Differential Housing for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction           Black in color INCLUDES: Two front differential housing halves REQUIRES: Installation around assembled differential components

59,-

** Ikke på lager
KJØP
 These are the optional 17mm Splined Wheel Hubs for the                    T-Maxx 3.3 4WD Nitro Monster Truck. FEATURES: Aluminum construction, green anodized in color           Converts wheel hubs from 14mm to 17mm and allows the use of wheels             with 17mm hex INCLUDES: Four aluminum splined Wheel Hubs and Nuts, four 4x13mm Screw Pins REQUIRES: Installation on the vehicle

269,-

299,-

** Ikke på lager
KJØP
-10%
Speed bit, nut driver, 8.0mm

99,-

119,-

På lager 3
KJØP
-17%
Bulkhead Front Upper XRT and X-maxx Bulkhead, front (upper) Replacement front upper bulkhead

69,-

79,-

** Ikke på lager
KJØP
-13%
Traxxas 7727R Bulkhead, rear (upper) (fits X-Maxx® 8s or XRT™) Rear upper bulkhead fits 8s X-Maxx® and XRT™ Replacement part for these models: XRT™ X-MAXX™ 8s

69,-

På lager 3
KJØP
Traxxas 2821-PORT - iD® Charging Port for TRX-4M® Batteries For use with EZ-Peak® iD Chargers - Cut Charging Time in Half! Charge 2821 batteries up to 2X faster than the TRX-4M included charger Access all the features of EZ-Peak iD Chargers including storage charge Allows compatibility with all EZ-Peak iD multi-chemistry chargers Check cell voltage and monitor charging in real-time with EZ-Peak Live chargers and the EZ-Peak Live app Full-Featured iD Charging Convenience for TRX-4M Introduce TRX-4M owners to the world of EZ-Peak charging convenience. 2-amp charging port designed for the TRX-4M 2821 750mAh LiPo battery Charge up to twice as fast as the stock TRX-4M USB charger with the advanced circuitry of the EZ-Peak lineup Access Balance, Fast, or Storage modes Check cell voltage with EZ-Peak Live and EZ-Peak Live Dual and the EZ-Peak Live mobile app Easily connects the TRX-4M battery to EZ-Peak chargers with iD iD convenience and EZ-Peak features for TRX-4M owners *Cell voltage check and charge monitoring require EZ-Peak Live or EZ-Peak Live Dual charger and the EZ-Peak Live app.

139,-

149,-

På lager 3
KJØP
-7%
Driveshaft assembly, rear, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

149,-

169,-

På lager 6
KJØP
-12%
Tires, BFGoodrich® Mud-Terrain T/A® KM2 (dual profile 4.3x1.7- 2.2/3.0") (2)/ foam inserts (2)

249,-

269,-

På lager 1
KJØP
-7%
Body Clips Standard Black (12)

29,-

39,-

På lager 5
KJØP
-26%
Traxxas 6787 - 4X4 Hardware Kit Give your Traxxas model a complete refresh with this replacement hardware kit. Traxxas hardware kits replace the screws and fasteners on your vehicle with new factory-fresh hardware. Individual compartments keep everything organized with a handy label to measure and identify the parts. Not all hardware compatible with BL-2s models. ­ 4X4 HARDWARE KIT FEATURES ­Black oxide coating for improved rust resistance Tough hex-drive heads Individual box compartments Handy label for identifying hardware

379,-

399,-

På lager 3
KJØP
-5%

59,-

På lager 8
KJØP
Yeah Racing HD Steel 5mm Bore Motor Gear/Pinions 32 Pitch 20 Teeth Description: 5mm bore 32 pitch pinions for your heavy duty and big vehicles! Made from HD steel for utmost durability and strength, prolongs the pinon's lifetime! Laser etched markings for you to clearly identify the size of the pinion with ease. Feature: For: 5mm Shaft Motors Material: HD Steel Color: Black Include: Pinion Gear (1 pc) Set Screw (1 pc)

59,-

** Ikke på lager
KJØP
Battery hold-down (3)/ battery clip/ hold-down post/ screw pin/ pivot post screw

109,-

På lager 1
KJØP
This is the Cover Gear/Wire Retainer                       For the Traxxas 1/10 Rally VXL FEATURES: Made of black plastic. INCLUDES: One cover gear           One wire retainer

39,-

På lager 3
KJØP
This is a replacement Traxxas Steering Linkage Set, and is intended for use with the Traxxas 1/10 Rally Racer.

49,-

På lager 7
KJØP
Bulkhead, front

69,-

79,-

På lager 1
KJØP
-13%
Gear, 12-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

79,-

89,-

** Ikke på lager
KJØP
-11%
Stub axle assembly, front, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft)

79,-

På lager 5
KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png